Navigator panel display not accurate representation.

I've just tried my hand at converting a photograph to a simulated oil painting.  The final step was to select Filter>Texture>Texturizer.  I then faded that adjustment (Ctrl Shift F) to achieve the degree of texture I desired.
I then noticed that the Navigator panel display a much stronger and harsher amount of texture.  I'm using a dual monitor setup and I first assumed that the difference was between the monitors.  But, I drug the navigator panel over to my main monitor and it was the same there.  When I printed the photo it was OK, but I hesitated printing it, not being sure which was the correct display.
Main Display
Navigator
Anyone else have this problem? Is this difference normal?

Hi John,
Just out of curiosity I tried following your footsteps and found that with OpenGL turned off the effect levels visible in the main window and Navigator palettes seem about the same.  But with OpenGL on I believe you could say that the Navigator window there was a larger difference.  Knowing what I know about OpenGL resampling (and guessing Adobe enables the highest quality resampling), the main window, when zoomed to other than 100% is probably the better representation of the actual effect level in the image.
Screen captures below...
OpenGL Turned Off
OpenGL Turned On
So I guess you could say what you're seeing is typical.  Given that the Navigator panel is mostly for seeing where you are in the image I guess it's nothing to worry about.
Did your print come out looking just like you expected per the main editing window?
-Noel

Similar Messages

  • Initial State of Navigation Panel - Automatic not working

    Hello,
    I have several iViews where I have set Initial State of Navigation to Automatic, which should collapse detailed navigation if there is nothing on it to display. However, it always comes up open even though it is blank. Is there anything else that needs to be down to make it work? We are on EP7 SP14.
    Thanks,
    Alex

    Could you check your Portal Desktop Innerpage to check if there is some other iViews also on the left hand side where detail navigation iView is residing? Sometime another iView named Favorites is added there. So it might be the case though detail navigation is not there still it is showing the blank portal favorites iView on the left side.
    To check this Open you portal framework page -> Open Desktop Innerpage -> See if there is anything except Content Area and Detailed Navigation there. Check the Innerpage layout to see where these iViews are placed in side the page.
    Regards,
    Shubhadip

  • DTN-dynamic height of the navigation panel is not increasing

    Hi All,
    I'm having an issue in DTN panel.As the Dynamic Navigation Tree increases the visibility of links diminishes.
    I tried increasing the height of DTN panel in theme editor but it is not helping the cause.
    Ex:
    Parent1
       link 1
       link2
       link3
    Parent2
      link1
      link2
      link3
    Parent3
      link1
      link2
    In the above example when all the "parents" are expanded then the links under Parent3 are not properly visible.
    Please help me out in this issue.
    Thanks,
    Pradeep

    Hi,
    Was the custom detailed level navigation working earlier in terms of the expected height adjustment with clear visibility of child nodes?
    If not, suggest you to see if following things might work for you.
    1. Revert the Height property changes on custom DLN and make them similar to the Standard DLN.
    2. Verify the Custom DLN CSS used. Because it's the CSS that would be majorly controlling the styling and visualization of the UI elements on the DLN iView. And this should be place to see why the child nodes are shown in diminished size when parent nodes are expanded.
    Hope this helps.
    Thanks,
    Swapna Priya.

  • Date always display not accurate

    Hi
    I don't know why my display date always 1 day before the actual date. Let say the date value in database is 15-08-2006 in database, while I get the date and display it into my page, it always show me 14-08-2006.
    Is it this problem is related with the locale setting? will it also influenced by the server and client locale setting?
    I try to set the locale in faces-config.xml, but it seem like not effect on display the actual date. So may I know what problem I am, and how can i solved it properly?
    Thank you.

    I found the problem thanks google !
    The response is here :
    http://wiki.apache.org/myfaces/FAQ#Date
    And the solution is :
    Backing bean code :
    public TimeZone getTimeZone() {
              return TimeZone.getDefault();
         }JSP page code :
    <h:outputText value="#{hist.date_Crt}">
                             <f:convertDateTime timeZone="#{historyAction.timeZone}" />
                        </h:outputText>How difficult it was to solve this problem ! 2 hours to surf on the web for that !
    Thanks google ;).

  • Navigation Panel not showing up the links

    Good Afternoon SAP Experts,
    After applying support package 20, portal is not showing the links on navigation panel when accessed by an regular user. However, if you access portal with a super admin user the links appears.
    It's important to say that this is occuring just on Default Framework (We also have the Light Framework running and it works well). We already checked the roles, worksets, pages and iViews permissions and couldnt found any problem. We checked also the frameworks, and it's everything ok.
    Some important items:
    - We have a customized default framework page.
    - We have a custom theme.
    - The issue is happening with the customized components, however we did the tests on the standard components and the same error occurred.
    My System:
    J2EE Engine 6.40 PatchLevel 108290.313
    Portal 6.0.20.0.0
    Does anyone can help me to find a solution or already experiencied something like this?
    Thanks so much,
    Armando Martines Neto
    Edited by: Armando Martines Neto on Jan 23, 2008 5:48 PM

    More information,
    Today I Replaced the .par files : com.sap.portal.navigation.detailedtree and com.sap.portal.layouts.framework restarted the server but the problem istill happening. also I created a new desktop with new theme and framework (all copied from standard) ... but the navigation panel still not showing the links. any suggestion?

  • Navigation Panel Settings

    Hello guys,
    I need to work on my Portal to have the navigation panel static. We do not want that incremental arrows that allow the users to control the width of the navigation panel. A good example of what I need is the navigation panel of SDN site (look to the left...).
    Also, the my navigation panel has a white line on the left and I want to remove it. I think it is related to the design bars of the iViews on the navigation panel, but not sure how to remove it completely.
    I have already tried some workarounds, such as determining the hights and widths to 0px, but no success.
    Can anyone help me, please?
    Thanks in advance
    Fernando Urzedo

    Hi Fernando
    You can do it in System Administration-> Portal Display --> Theme Editor and select the theme you want to edit.
    check out the topic
    Remove Navigation panel header  scrollbar and Design Bar
    Hope this helps.
    Thanks,
    Praveen
    PS. Dont forget to reward points

  • Left navigation panel in NWBC 3.0 PL8 disappears

    Hello,
    I am facing a weird thing:
    When I log on to NWBC 3.0 PL8 (Desktop) the left (blue) navigation panel is not there anymore.
    The problem is independet from the user and the system. When I log on to another PC with my user (independent of Dev or Q-System) the navigation panel is visible again. When another users logs on at my PC the navigation panel disappears as well.
    This phenomenon is not reproducable. From time to time the navigation panel is available again. But no settings were changed.
    When I log off and on again it's invisible again.
    Don't misinterpret it: It's not about if the panel is opened or closed. It's just not there anymore.
    Thanks and best regards,
    Johannes

    Hello Jude,
    I can't test PL9 at the moment.
    But after the installation of PL8 the left navigation panel worked fine.
    Could any registry-keys be responsible for this behaviour?
    Regards,
    Johannes
    Edited by: Johannes Meinel on Nov 11, 2011 7:58 AM

  • Navigation panel not displaying correctly

    Hi!
    I've had this acrobat 9 pro problem for a few months but it's finally gotten to me - information displayed in the navigation panel (IE - layers, bookmarks, examine document etc) do not display properly. I can't really describe it, so here are some screen grabs. I've tried resetting the navigational pane but to no avail.
    Is this an issue that has come up before? How can i resolve it?
    Many thanks in advance.

    Hi Zootbot,
    Please try updating to the patch 9.5.5 and check.
    I have seen such an issue on Mac Mavericks but again that's not a supported environment for Acrobat 9
    Regards,
    Rave

  • Navigation Panel Pages button not displaying thumbnail pages

    Version of Acrobat = Standard 8.0.0
    OS = Win XP SP2
    Networked Dell Optiplex 620
    61.6GB Free disk space
    No error messages
    The Navigation Panel Pages button will not display pages in thumbnail format.
    When clicked the highlight around the button icon changes from a square with rounded corners, to just rounded corners on the left of the highlight. The right hand side of the highlight is cut off straight as if by the thumbnail panel that isnt visible.
    This behaviour is also repeated on the Bookmarks and Signatures buttons in the navigation Panel as well.
    Fiddling around with all the navigation panel settings or the document settings I can find has not made the thumbnail pages reappear.
    I havent been able to access the Updates section of the Adobe website today to apply any relevant updates.
    Cheers.
    Adam Crossingham
    Systems Support Analyst
    Heritage Managing Agency Limited

    Just in case, I would go through the updates to get AA8.1.2 and check if that was a bug in 8.0.0.

  • RoboHelp HTML Version 10 - Navigation panel not displaying in published project

    We are generating a WebHelp project in RoboHelp HTML Version 10 and the navigation panel (TOC, Search, etc.) is no longer visible in the index file (viewed locally) and it's only visible by clicking "Show" when viewed in a web server. This issue is occurring with Internet Explorer 11 and Google Chrome Version 39.0.2171.99 m. I also tried to view the index files of previously generated projects and am experiencing the same issue (this did not occur before). Is this a known issue? It appears that there a few other discussions posted recently experiencing similar issues. Any help would be greatly appreciated.
    Thanks,
    Nikki

    Hi there
    Sorry, but I'm a bit confused. What you are describing sounds like perfectly normal behavior.
    Can you share a link where this is happening? Not so we can click it, but so we can see what the link looks like.
    If you want a topic to open with the surrounding navigation (TOC, Index, Search, Glossary) you need to click the Show link, then look at what's in the Address bar. Copy that link and you should have what you need.
    Cheers... Rick

  • Navigation Panel not displayed

    Hi,
    I have just installed my EP server. When I log in, I do not see the navigation panel. It gives me an error "Error: Access is denied" followed by an error "Error: 'undefined' is null or not an object".
    I checked the browser settings for security, privacy and advanced settings, which are as per SAP documentations.
    Appreciate suggestions as to where the error could be.
    Sivakumar

    Use server name in url, when accessing the portal. Do not use its IP address instead.

  • Navigation Panel and content Area can not any more be displayed

    Hello Gurus,
    we have a very big prolem with our Portal in the Development.
    A new colleague has probably changed some settings in the portal. Now by logging into the portal, i can only see the header Area (Masterhead, Tolls, Top-Level Navigation, Page title Bar). By clicking on the role like system Administrator, nothing is showing.
    The Navigation Panel and the content area are gone. How can i restore them back?
    Any Workaround?
    Thanks in advance
    Cheers

    Hi Anja, Puneet,
    thank you very much to have replied.
    through the SAP Note and you path, i can access the portal again. I am not using the standard framework.
    We have a customized Destop Page, Framework and after a check they still exist. Could you once advice where could be the error. Or where someone chnage the settings?
    many thanks in advance.
    Cheers

  • The navigation thumbnail in the developpement panel is not refreshed

    Since few days, the navigation thumbnail in the developpement panel is not refreshed (when the mouse is over a preset or when a modification is done on the image). When I'm coming from the grid panel and going to the developpement panel, the navigation thumbail is refreshed for the selected image but once I change the focus to another image it's not working anymore...
    I tried to optimize the catalog and also re-generated images previews...
    I'm using Lightroom 3.6 with Canon Raw files.
    Do you have any clues ?
    Thanks,

    I hate to dredge up an old thread but.... I'm now for the first time seeing this same problem using LR 5 on a mac w 10.8.4 Exactly as the original poster indicated. Should I dump the pref file? or is there something else going on. I have restarted the computer but after applying a preset and then reverting to the original, no preset previews are available from my presets list. selecting another image does not fix issue.
    Not a huge deal but annoying for sure. Anybody have a suggestion?
    Doug

  • Display of Key Figure's Names in the Navigation Panel

    Hello all,
    Is anyone know how to display the key figure's names list in the navigation panel, as in that eLearning presentation –
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d049b14f-775c-2a10-9ea2-9d670feaf2fe
    (I'm talking about Net Sales, Sales Plan and      Deviation % on the left)
    I didn't know it is possible until I saw that link.
    Thanks!

    Hi Ron,
    I know, are passed 3 years to your post but I'm searching the same answer to your question, have you found it?
    Anyone can help me?
    Thanks a lot.

  • Book Title in Navigation Bar Does Not Display Correctly

    Hi,
    I tried creating a epub file following Epub Best Practices ebook but after creation and loading of the ebook, I noticed that the book title at the navigation bar is not appearing correctly. The only the upper half of the text is shown so it appears that the text is cut in half. What should I do to correct this?
    Thanks,
    -- Jeff

    It seems that ADE is having errors displaying the book title when it has a non-breaking space. The book title in the previous post contains an non-breaking space. And when I replaced it with a regular space, the display was fixed. See link for the screen grab:
    http://picasaweb.google.com/lh/photo/WIRjcDpEJSGOIur7FEBvzg?authkey=U6NN0HOA9dw&feat=direc tlink
    Aside from non-breaking spaces, what other characters does ADE does not support (which displays the title incorrectly)?
    -- Jeff

Maybe you are looking for

  • How to get open source 3d driver for ati radeon?

    Hi I have a radeon7000 and I don't wanna use the fglrx driver. (ethical reasons...) How can I install/use the free radeon driver? Thank you very much benny

  • Photoshop doesn't save metadata

    I try to write meta data to psd file. i add resource block (as in photoshop file format.pdf) with custom number (4000 for example). all data saved and photoshop correctly open file. but when I click save, all my data disappear and are not saved. Is t

  • I can't select icloud backup on my iphone 5, i've got 4.5 gig of available storage and this just started 2 weeks ago

    I can't select icloud backup on my iphone 5, i've got 4.5 gig of available storage and this just started 2 weeks ago, I've tried deleting a couple of apps, signing out, rebooting, all to no avail.  The button stays grayed out and will not let me sele

  • Problem with HR Forms

    Hi, I am having problem with HR Forms. I am trying to edit renumeration statement form (Copy of the standard form, with custom infotype fileds). One of the Single Fields was spelled wrongly, and I am trying to correct it. I went to the chnage screen,

  • Flash Player 11.5 concurrency not working

    Hello, My background worker is not working in FP 11.5 (11.5.500.90), but using the same code it works in FP 11.4. I can see that the worker changed it's state to "RUNNING" but afterwards it seems the worker's constructor is ignored. Here is my worker