NAVS Tax price is not copied when creating a PO using template PO

Hello,
We have the following situation.
In our Pricing calculation schema we use condition NAVS for tax calculation.
Tax amount is entered automatically when we create a PO (based on condition records found)
However, when we create a PO, copying this existing PO, The NAVS tax returned is zero!
the following message appears in the price analysis:
"04 - 203 - Condition record was found and changed manually"
Via the button "Update" with option G "Copy pricing elements unchanged and redetermine taxes"  we can retrieve again the tax price.
We would like to skip this manual procedure and have the system automatically copy the NAVS-taxprice.
How can we accomplish this?
thanks,
Aart

Not necesary anymore

Similar Messages

  • PO Number is not copied when create SD document from Reference

    Hi Gurus,
    I created Billing request document (VA01) by reference with a contract (VA41) , but the PO number field ( VBKD-BSTKD) is not copied over. I have checked all the data transfer rountines, but still could not find out.
    Please help , which data transfer rountines should I use to copy PO number to the next document ( copying control from Sales document --> Sales document)
    Thanks
    Edited by: Eric Y on Jun 19, 2008 5:22 AM

    Hi,
    Please, check in IMG - Public Sector Management - Funds Management Government - Funds Management-Specific Postings - Earmarked Funds and Funds Transfers - Account Assignment Transfer - Define Rules for Account Assignment Transfer what the rules for FArea are.
    Regards,
    Eli

  • Legal Entity not populating when creating a transaction using Deposit API

    Hi,
    I'm creating deposits using API 'ar_deposit_api_pub.CREATE_DEPOSIT' in R12. The problem I'm facing is, legal entity is not getting populated, both transaction type and batch source have legal entity attached to them. Are there any other setups which I should look at? Any help would be greatly appreciated.
    thanks
    Goutham.

    Hi,
    I'm creating deposits using API 'ar_deposit_api_pub.CREATE_DEPOSIT' in R12. The problem I'm facing is, legal entity is not getting populated, both transaction type and batch source have legal entity attached to them. Are there any other setups which I should look at? Any help would be greatly appreciated.
    thanks
    Goutham.

  • Substitution variables not copied when application is copied

    Hi Experts,
    I am using essbase 9.3.1 on AIX uniox server.
    When I copy Essbase application, I am not getting the substitutionvariables copied from the application to new application.
    Substituion variables are set at database level, not at app or system level.
    I am using the following maxl commnad to copy application
    create application newapplication as oldapplication;
    I would greatly appreciate any ones help.
    Thanks
    TSREDDY

    I confirm this acts the same on 11.1.1.2 Windows 64-bit Essbase. The MaXL create application command when using an existing app does not copy the substitution variables. Using EAS to make a copy does create the substitution variables.
    You will need to write some batch scripts to bring over the variables with MaXL if you wish to automate this process.
    You would make use of the display variable and alter database commands to automate.
    Regards,
    John
    http://www.metavero.com

  • Partner function not working when creating PO with ref to PReq

    Partner function is not working when creating a Purchase Order with ref to a Purchase Requistion, Partner functions maintained in the vendor master are VN, OA & PI.
    But OA & PI are not appearing in the PO header partner tab when created with ref to PR.
    however it works when i create the PO directly ( without the PR ref )
    I am using the same material & Plant for both manual PO & PR to PO.
    Any idea what could be wrong .
    I have maintained the settings for schema groups for vendor master & purchasing doc in the partner determination.
    Thanks
    Dkmurthy

    Hi,
    I have also an issue that seems similar to one you are discussing.
    When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent.
    When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
    Company code is assigned to purchase organization, and so is purchase organization to plant.
    Any idea why there is no automatic message determination in the case of the transaction: ME21N
    Note: If I try ME21N, and enter the output type and partner, manually, I receive a warning message
    VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent. However I can not overcome the warning message, if it plays any role, because I can not assign partner function LS to the vendor.Then I receive message CZ 327 (Can not use this partner role).
    Any input is wellcome.

  • Can AVCHD files be not copied when imported?

    When I import AVCHD files they are copied even though in the preferences I have selected "Leave files in place" and I leave that option checked in the import dialog. Is there any way to prevent AVCHD files from being copied?
    Other types of files are not copied when I import them.

    My exact specifications and work process:
    I use two separate video cameras. One is a Panasonic HDC-TM900K; the other is a Panasonic HDC-TM700K. I record in AVCHD onto SanDisk 32 GB SD cards.
    When filming is complete, I copy the entire contents of each separate SD card into its own folder, labelled according to camera and capture date.
    In the past, this has allowed me to import into FCP 10.0.x and work directly with the AVCHD files without having to transcode or copy them. I have used this exact process dozens of times since the release of FCP 10.0.x.
    Just this most recent time, after upgrading to FCP 10.1, while importing the same AVCHD files from the same SD cards and the same video cameras, the option to "leave files in place" was disabled.
    I do understand that FCP 10.1 uses "Libraries" to organize media, and that this is a major change in how it organizes media files. I figured that this change was responsible for the difference in behavior.
    I was hoping there was a way to continue to work with AVCHD card folders without having to copy or transcode.

  • Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11

    Stored procedure not found when creating a new recordset binding in Dreamweaver CS6 with ColdFusion Server 11.  I can see the tables and views in the database tab, but no stored procedures.  If I connect to a data source created in ColdFusion Server 6 I am able to see the stored procedures.

    Ben thanks for the reply!
    Yes that is the process I am following:
    In Dreamweaver, open the page that will run the stored procedure.
    In the Bindings panel (Window > Bindings), click the Plus button, and then select Stored Procedure.
    In the Data Source pop‑up menu, select a connection to the database containing the stored procedure
    Enter the ColdFusion Data Source user name and password.
    At this point in the procedure drop down I would get a message that said No Stored Procedure Found.
    Right now it appears to be working, I had to create a new site that pointed to the older CF 6 server's data source and create a page following the process above, then when I went back to the CF 11 site the stored procedures were now populated.  I need to make sure it is pulling from the correct server but right now it appears to be working.
    Thanks
    Dwight

  • Change pointers are not generated when creating a material master

    Dear Experts,  
    Change pointers are not generated when creating a material master. 
    However, when a change is made to the already created material, the change pointers are created according the fields in BD52.  
    Am I missing any settings?
    I need to create change pointers immediately when I create the material master in MM01.  
    Please suggest. 
    Regards,
    Shetty

    did you follow the steps given in
    http://help.sap.com/saphelp_nw73/helpdata/en/4a/6dcbe9c95261a3e10000000a421937/frameset.htm

  • PSE 8 some photos will not autoimport when creating an photobook and block the whole sequence. Are there knows reasons why individual photos can hang the import? Thanks Michael

    When creating photobooks with PSE 8 I find occasionally that certain photos block the autoimport function and none of the sequence are loaded into the new photobook. Using the identical setting to create a photobook other sequences of photos work perfectly. The photos have been checked and found and all are connected and recognised. Are there knows issues with some photo formats which will not autoimport when creating a photobook?
    Thanks for the help.
    Michael

    Sometimes LR can be "nudged" into showing folder relationships which better match the file system, by using the "show parent folder" command. When existing folders appear as if they were "top level" in the drive, we can see a more or less virtual picture of the situation, rather than anything real. So newly added folders can sometimes present themselves as if independent of what is already there.
    By forcing LR to show a fuller hierarchy of folders, more attention gets paid to the actual arrangement - so new and existing folders should "wake up" and thereafter appear more reliably in the right relationships.

  • How to add multiple table when creating add on using b1de

    Hi all,
    Plz help me
    How to add multiple table when creating add on using b1de.
    Thanks

    Hi dns_sap,
    Can you explain a little better what you are trying to accomplish? Is it to create UserTables and UserFields in the database, when the addon runs the first time?
    If so, you can use the following code
    Add User Table
            Try
                Dim lRetCode As Long
                Dim oUDT As SAPbobsCOM.UserTablesMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserTables)
                oUDT.TableName = TableName
                oUDT.TableDescription = TableDescription
                oUDT.TableType = TableType
                lRetCode = oUDT.Add
                '// Check for error when adding the Table: if lRetCode = 0 the table was created; if lRetCode = -2035 the table already exisits
                If lRetCode <> 0 Then
                    oApplication.MessageBox("Error: " & lRetCode.ToString & ", " & oCompany.GetLastErrorDescription)
                End If
            Catch ex As Exception
                oApplication.MessageBox(oCompany.GetLastErrorDescription)
            Finally
                System.Runtime.InteropServices.Marshal.ReleaseComObject(oUDT)
                oUDT = Nothing
                lRetCode = Nothing
                GC.Collect()
            End Try
    Add User Field
    Try
                Dim lRetCode As Long
                Dim oUDF As SAPbobsCOM.UserFieldsMD = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oUserFields)
                oUDF.TableName = TableName
                oUDF.Name = FieldName
                oUDF.Description = FieldDescription
                oUDF.Type = FieldType
                lRetCode = oUDF.Add
                '// Check for error when adding the field: if lRetCode = 0 the field was created; if lRetCode = -2035, the field already exists
                If lRetCode <> 0 Then
                    oApplication.MessageBox("Error: " & oCompany.GetLastErrorCode & ", " & oCompany.GetLastErrorDescription)
                End If
            Catch ex As Exception
                oApplication.MessageBox(oCompany.GetLastErrorDescription)
            Finally
                System.Runtime.InteropServices.Marshal.ReleaseComObject(oUDF)
                oUDF = Nothing
                lRetCode = Nothing
                GC.Collect()
            End Try
    Regards,
    Vítor Vieira

  • How do i add photos to the photo array when creating a book using iphoto 8.1.2?  the book doesn't accept the albums and foldlers i drag and drop.

    how do i add photos to the photo array when creating a book using iphoto 8.1.2?  the book doesn't accept the albums and foldlers i drag and drop.

    I'd suggest you ask this question in the iPhoto forums:
    iPhoto
    Posting here is unnecessarily limiting the people who'll see your question to those running iMacs.
    Regards.

  • How significant is the yellow hazard warning for pictures when creating an album using IPhoto?

    How significant is the yellow hazard warning message for pictures when creating an album using IPhoto?

    Are you talking about making a Book?
    How siginificant depends on how low resolution the photo is and how sensative you are to poor prints - it displays when a -photo will print below 180 dpi - what is the DPI of the photos that is givingyou the warning (the photo size divided byt the pixel size)
    LN

  • Certen user is not able to create the sc using sepecific vendor

    Hi,
    User is not able to create the SC entering specific  vendor .
    This vendor is in maintained in SRM for one pur.org (I have checked in PPOMA_BBP).
    Then why he is not able to creating the sc using this Vendor

    whether user is belong to same region of the Vendor or different. Is there any enhancements you have like that.
    Please check those things.
    Hope this will help.
    Thanks
    Venkatesh P

  • Is it possible to create Secondary Tile using Templates in Windows Store apps?

    Hi Team,
    We can update Secondary Tile with Templates using notificatations,  Is it possible to create Secondary Tile using Template in Start Menu
    Tanks,
    Siva Varri
    Thread response from msdn

    What do you mean by "in Start Menu"? Do you mean Live tile? See https://msdn.microsoft.com/en-us/library/windows/apps/hh465403.aspx
    https://msdn.microsoft.com/en-us/library/windows/apps/dn468032.aspx
    Best Regards,
    Please remember to mark the replies as answers if they help

  • Excise and ***. Valsue doen not show when Creating a Sales Order

    Hi SAP Gurus,
    I am creating a Return Sales order through VA01 with reference of Billing Document which was earlier giving error  of 'Copying from sales document type ZSFG to ZREV is not supported' that was resolved by going through the available threads support. I have done it through VTAF.
    Now system copying the records and showing the material and qty but when we doube click an item and then go in Condition tab it is not showing Assesable Value, Excise amount and CST where as it was showing Freight Amount.
    Please advise what wrong we are doing.
    Rajesh Gupta

    Check the pricing analysis in condtions tab what it says ?
    If only taxes are not copied then check the UTXJ Condition records , if it exits then go to VK12 check the validity periods of the same.
    Hope it helps u
    Regards,
    Ramesh

Maybe you are looking for