Navteq Q307 Oracle Delivery Format (ODF) and 11g

This is probably a question for the Navteq support forums, but since I can't seem to find one of those....
The release notes for Navteq's ODF North America, dated 18 Dec 2007, states the data cannot be loaded into an Oracle 11g database.
Anyone know why? I have loaded it into a 10g database, but I want to decommission that Oracle instance.
If I can't import it into the 11g database following Navteq's provided instructions, can I transport the 10g tablespaces to the 11g install?
I'd experiment, but this is a significant amount of data, and it is hard to tell if what you did was 'correct' or not (especially perfromancewise)
Thanks!

Hi,
At the time of the Q307 release, Oracle 11.1.0.6 was the shipping version of Oracle, and this was a true statement. As of the Oracle 11.1.0.7 release, it is possible to import the transportable tablespaces directly into the 11g database.
I have not personally tested Q307, but believe it should work. Certainly the versions of NAVTEQ data that have shipped since 11.1.0.7 has been available have all been tested and all work on 11.1.0.7.
Hope this helps,
Dan Abugov
(NAVTEQ Business Development Manager and Consultant)

Similar Messages

Directory structure and files in Oracle Application server 10g and 11g

Hi all,
I am doing a lab migration from 10g to 11g based on the use of JAXB. There were some directory structures used in 10g to store the JAXB jar files and some other custom jar files. I want to know the equivalent folder structures in SOA 11g server. The 10g server directories are mentioned below:-
1.<OracleAS_Home>\webservices\lib.
2. server.xml located at <OracleAS_Home>\j2ee\home\config in 10g. Where can I find the equivalent file to "server.xml" in 11g server?
3. <OracleAS_Home>\bpel\system\classes\com\oracle\bpel\xml\util.
4. <OracleAS_Home> \bpel\system\classes.

Here are the equivalents as per best of my knowledge:
1. <WebLogic Home>\server\lib
For example, D:\Middleware\wls1036\wlserver_10.3\server\lib
2. config,xml located at <Domain_Home>\config\
For example, D:\Middleware\wls1036\user_projects\domains\ArunBaseDomain1036\config\config.xml
3. It should be the same as 10g (instead of OracleAS_Home, it will be ORACLE_Home) if you install the BPEL product. Since, I have not installed BPEL/SOA, I am not very sure.
4. It should be the same as 10g (instead of OracleAS_Home, it will be ORACLE_Home) if you installed the BPEL product.
Also, I would recommend that you consider using ORACLE Smart Upgrade (JDeveloper component) to help you with the upgrade process. It exactly points out these mappings of file/directory structures AND the necessary configuration changes as well.
If you are requirement, is only about making the library jars available to your application, then consider reading the below discussion.
Re: XIncludeAwareParserConfiguration cannot be cast to XMLParserConfiguration
Arun

Golden Gate 32bit for Oracle 10g and 11g

Does oracle released Golden Gate 32bit for Oracle 10g and 11g, i could not able to find out 32bit http://edelivery.oracle.com or OTN.
Thanks

never mind, i was able to download from e-delivery.

Difference in select for update of - in Oracle Database 10g and 11g

Hi, I found out that Oracle Database 10g and 11g treat the following PL/SQL block differently (I am using scott schema for convenience):
DECLARE
  v_ename bonus.ename%TYPE;
BEGIN
  SELECT b.ename
    INTO v_ename
    FROM bonus b
    JOIN emp e ON b.ename = e.ename
    JOIN dept d ON d.deptno = e.deptno
   WHERE b.ename = 'Scott'
     FOR UPDATE OF b.ename;
END;
/While in 10g (10.2) this code ends successfully (well NO_DATA_FOUND exception is raised but that is expected), in 11g (11.2) it raises exception "column ambiguously defined". And that is definitely not expected. It seems like it does not take into account table alias because I found out that when I change the column in FOR UPDATE OF e.empno (also does not work) to e.mgr (which is unique) it starts working. So is this some error in 11g? Any thoughts?
Edited by: Libor Nenadál on 29.4.2010 21:46
It seems that my question was answered here - http://stackoverflow.com/questions/2736426/difference-in-select-for-update-of-in-oracle-database-10g-and-11g

The behaviour seems like it really is a bug and can be avoided using non-ANSI syntax. (It makes me wonder why Oracle maintains two query languages while dumb me thinks that this is just a preprocessor matter and query engine could be the same).

How to Install oracle 10g and 11g on aix 6.1

Can we install oracle 10g and 11g Enterprise Editions on IBM aix 6.1 ? If so how
Chetan
Edited by: chetan0926 on Jan 11, 2012 2:56 AM

Hi;
Can we install oracle 10g and 11g Enterprise Editions on IBM aix 6.1 ? If so how Yes you can,both version is certified
I agree Sybrand, Please check installation guide. All your questions will be answered in it
http://www.oracle.com/pls/db102/homepage
http://www.oracle.com/pls/db112/homepage
Also see:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

Differences between Oracle Discoverer 10g and 11g .

we would like to know if they are any differences between Oracle Discoverer 10g and 11g and any issues with 10g that are overcome in 11g.
Please make us aware of any merits in going for 11g over 10g.
apps version 11.5.10.2
Regards

Please see these links for the list of new features, bug fixes, certification, and installation of Discoverer 11g on 11i instance.
Discoverer 11.1.1.4 Certified with E-Business Suite
http://blogs.oracle.com/stevenChan/2011/02/discoverer_11114_ebs.html
EBS Sysadmin Primer: Oracle BI Discoverer 11gR1
http://blogs.oracle.com/stevenChan/2010/08/discoverer_11gr1_primer.html
Oracle Business Intelligence Discoverer 11g
http://www.oracle.com/technetwork/developer-tools/discoverer/overview/index.html
Oracle Business Intelligence Discoverer 11g documentation
http://www.oracle.com/technetwork/developer-tools/discoverer/documentation/index.html
Thanks,
Hussein

Important differences between oracle 10g and 11g

Hi friends, can anyone tell me (pointwise) what are the major (and minor) differences between Oracle 10g and 11g.
Please point me to some documents if possible.
Thanks in advance

The name of the link says it all: "top_features."
In short it is Oracle's list of what they have for marketing and sales reasons designated "top features."
It is not intended to be, and is not, a complete list of features. Often the features Oracle does not
talk about are the most important.
Let me give you some examples. I have never seen Oracle announce DBMS_XPLAN as a new feature
yet you should not run an explain plan without it. Neither have I ever seen Oracle announce the new
NO_DATA_NEEDED predefined exception. I have listed literally hundreds of new features you will not
find in Oracle's new features docs.
I did a presentation at OpenWorld this year as part of the unconference titled "New Features in
Database 11gR2 that Oracle will not announce." It was easy to prepare a one hour presentation with
little fear of being proved incorrect. As I turned out only one of the features I presented was mentioned
by Oracle.
You can find the presentation slides here:
http://www.morganslibrary.org/pres/oow09_ucnf.pdf

Differences between Oracle 9i and 11g

Hi,
We are planning to migrate various PLSQL objects from Oracle 9i to Oracle 11g.
We have around 200 packages and Staored procedures Oracle 9i, can some one let me know if there are any specific items to look before we migrate from Oracle 9i into 11g so that everything works fine after the migration.
Please let me know major differences amognst in-built functions between Oracle 9i and 11g.
Thanks.

Oracle 11g has many advanced features in PL/SQL over Oracle 9i.
refer here,
http://www.oracle.com/technetwork/database/features/manageability/9i-to-11g-real-world-customer-exper-133754.pdf
http://www.oracle.com/global/de/upgradecommunity/artikel/upgrade11gr2_workshop2.pdf
http://www.compuworks.com/events/view/233.pdf
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getCourseDesc?dc=D52601GC10&p_org_id=15942&lang=US
Thanks

Having problem to install Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit

Dear All Precious Friends,
I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
I have already installed Oracle Database 11g Release 2 -------
----Then i configured JAVA Access bridge
--------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
-----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
-----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
Please help my Oracle Friends
Your early help will be highly appreciated.
thanks and regards
Hassan

You said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
First look for this link then drill into it:
Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
In this section you will find the following:
This is the full product installation of FMw 11 Release 2 (Forms & Reports)
Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6. This is NOT a full product installation - just a patch
Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
There are no patch sets for Release 2 as of yet.

Running Oracle database 10g and 11g on same 5 RAC nodes

Hello Gurus,
Could any body throw light if I can install and sucessfully run Oracle database 10g and 11g on the same Oracle RAC installation setup.My setup is below
Number of nodes-5
OS- windows 2003 or RHEL5
storage- DELL EMC SAN
Clusterware- oracle version11g
File system-Automatic storage management(ASM)
After I successfully setup clusterware,ASM on the nodes,I would want to install 11g database on all 5 nodes .
Then Install 10g database on only 3 of the nodes using the same clusterware.
What are your views on the same.
Also FYI... as per metalink node 220970.1(RAC: Frequently Asked Questions) one can do such a setup.
what iam looking for is practical experience if anyone has implemented this in production system,if yes any issues faced and how tough it is to support.
Thanks,
Imtiyaz

You could run an 11g database and 10g database on the same cluster as long as you use Clusterware 11g.
The administration aspect will drastically change according to the platform you run on. As of now, it appears you don't know whether it will be Linux or Windows.
It would be practical to support the same database release.

I have created TM lock in oracle 9i and 11g databases. by using same query

here is the query uesd for finding a lock in database.
select /*+ RULE */ 'DATAPOINT # ' bpb,
l.sid, ' # ',
s.username, ' # ',
s.sql_address, ' # ',
x.sid, ' # ',
y.username, ' # ',
l.type, ' # ',
l.id1, ' # ',
l.id2, ' # ',
decode(X.LMODE,
0, 'None',
1, 'Null',
2, 'Row Share',
3, 'Row Excl',
4, 'Share',
5, 'Shr Row Excl',
6, 'Exclusive',
decode(L.REQUEST,
0, 'None',
1, 'Null',
2, 'Row Share',
3, 'Row Excl',
4, 'Share',
5, 'Shr Row Excl',
6, 'Exclusive',
from v$session s, v$lock l, v$lock x, v$session y
where l.ctime > 120
and s.lockwait = l.kaddr
and l.type in ('TM', 'TX', 'UL')
and l.id1 = x.id1
and l.id2 = x.id2
and x.sid != l.sid
and x.sid = y.sid
and x.lmode >0;
after doing further investigation i found that for 11g condition s.lockwait = l.kaddr not satisfied where as for 9i it's gives correct results
here are the lockwait and kaddr values for 9i and 11g databases.
for oracle 9i
SQL> select lockwait from v$session where sid in (10,12);
LOCKWAIT
67B4E10C
SQL> select kaddr from v$lock where sid in (10,12);
KADDR
67B4E088
67B4E10C
for oracle 11g
SQL> select lockwait from v$session where sid in (70,134);
LOCKWAIT
070000002FA080D8
SQL> select kaddr from v$lock where sid in (70,134);
KADDR
0700000030C595C0
0700000030C59830
00000001108E3E58
00000001108E3E58
070000002FA6CB30
SQL>
please advise if there is any change for calculations for lockwait,kaddr for 11g.

can you post your query with explain plan for both 9i version and 10g version.
Thanks,
karthick.

Difference between oracle bpm 10g and 11g

Newbie: I am trying to understand 10g. The basic questions I have is
1)What is the difference between 10g and 11g?
2)What is the infrastructure & skillset needed for me to do implementation in 10g?
3)How is migration from 10g to 11g is accomplished?
Any resource links that would help me to get started with 10g would be appreciated.
Chaitanya

Hi,
Please follow the below mentioned link to find your answer.
Re: Main differences between oracle bpm 10.3 vs 11g
Migration from ALBPM 5.7 to BPM 11g
Bibhu

Diff between oracle 10g and 11g

Can any one could tell me what is the main diff between oracle 10g and 11g ?
Thanks in Advance
Venkat

Hi,
You can read
http://www.oracle.com/technetwork/articles/sql/index-082320.html
http://www.oracle.com/technetwork/articles/sql/index-099021.html
Anand

Oracle 10g and 11g Reports

I recently upgraded from Oracle Forms/Reports 10g to 11g. Oracle 10g Reports when saved as a PDF is easily converted to a word document, however ,Oracle 11g does not convert as 10g does. What is the difference and how to make the 11g report saved in a PDF be able to convert to a Microsoft Word document cleanly.
Thank you,
Steven

Hello,
There is a "known issue" with the PDF in 11g:
ALERT: Reports PDF Problems in 11.1.2.1.0 Patchset for Non-Linux Platforms (Doc ID 1522543.1)
May be the problem comes from this "issue" ...
"Patch Set Exception" exist for this issue.
Kind regards

Oracle 9i and 11g installation on same windows machine

Hi All,
I am facing strange problem, I installed 9i and 11g on same machine whiche is runng windows server 2003 service pack 2. I set ORACLE_HOME and PATH of both versions different
and both are installed properly. But when i try to create new database using oracle 9i DBCA after reaching step 8 DBCA becomes unresponsive whereas i am able to create new database using Oracle 11g DBCA. After searhing the entier net i am not able to trubleshoot the problem.Moreover in both version i am able to access using CMD and i got the connectivity.
I configure the listener for both on different port but when i run oracle 9i the screen shows first connectivity of oracle 11g sql* plus after that it is going to connect to oracle 9i this is my second issue.
Please guys take this problem on high priority.
Thanks in advance.

Hi,
Welcome 2 Oracle Forums :)
Please guys take this problem on high priority.This forum is not for high priority issues. All high priority issues should log S.R at http://support.oracle.com
I am facing strange problem, I installed 9i and 11g on same machine whiche is runng windows server 2003 service pack 2. I set ORACLE_HOME and PATH of both versions different
and both are installed properly. But when i try to create new database using oracle 9i DBCA after reaching step 8 DBCA becomes unresponsive whereas i am able to create new database using >Oracle 11g DBCA. After searhing the entier net i am not able to trubleshoot the problem.Moreover in both version i am able to access using CMD and i got the connectivity.
I configure the listener for both on different port but when i run oracle 9i the screen shows first connectivity of oracle 11g sql* plus after that it is going to connect to oracle 9i this is my second issue.Check the Installation and Database creation logfile for more details.
thanks,
X A H E E R

Navteq Q307 Oracle Delivery Format (ODF) and 11g

Similar Messages

Maybe you are looking for