Navto a different view in the same page

Is it possible to use the navto command to jump to a different view in a page or poiting to a position in a scrollable frame?

Yes, use decimals in your navto page number. For example, navto://myarticle#2.3 jumps to a place between page 3 and 4 in a smooth scrolling article.
For examples, see DPS Tips > Advanced Overlays > Scrollable Frame Links.

Similar Messages

  • How to create links to different files on the same page?

    Good day to all again,
    can someone please guide me through creating several links to different files on the same page. In other words, I am creating a photo page where my links are called Gallery 1, Gallery 2, etc... I would like to create links so when the User clicks on Gallery 1, they see Gallery 1 slide show in the frame; when the user then clicks Gallery 2, then they see Gallery 2 slide show in the window.
    My slide show files are done and I am using GoLive CS2. I have no knowledge of JavaScript or ActionScript/Flash.
    Any suggestions are highly appreciated.
    Thank you
    Alek

    Hi Diana,
    I'm a professional photographer and in the process of getting
    my finished site published. I used Coffeecup Photo Gallery. You can
    create multiple albums on the same page. Do a Google search for the
    address. It's easy, inexpensive, and it works. I tried to do this
    with the Photo Gallery in DW and FireWorks--but couldn't get it
    right. CC uses Flash and Javascript.
    Good Luck

  • Different view of the same query between users

    Hi at all,
    I strongly hope you can help me.
    The problem that i have is that:
    I have a different view of a query inserted in a workbook respect the view of the same query that have other users.
    In particular I watch in my query 4 fixed characteristic of the query ( Cost center, order type , controlling area, fiscal variant ), below the free characteristic block  and before data table.
    Instead other user watch only 3 fixed characteristics ( Cost center, order type , controlling area ).
    This is a problem because in the workbook there is a macro that reads the data from a fixed raw. So that this macro doesn't' t work in my workbook.
    I would specify that the workbooks is called from rules and not from fevorites.
    Thank you very much for your attention!
    Bye
    Fabio

    Hi Erwan,
    i have the SAPGUI version 3500.8.044 and the item you describes :
    Bex menu ( Business explorer -> Change Query -> Change variable values )
    let me to change the values of input variables.
    The new layout query, after the input of the new values, has the same rows of the fixed query value ( fyscal variant too).
    Thank you for your answer..
    bye
    Fabio

  • How to update data in database from different region of the same page

    Hi,
    I have pepared two regions of tabular form based on the same table,each region is selecting different columns of the same table.
    I want to update the values from different regions in the database using single submit button.
    Regards
    Shashi

    I presume that the two regions are working fine with their individual buttons and your issue is how to make them both save with one button.
    Here is how
    a. You will have 2 ApplyMRU and 1 ApplyMRD processes for each of the regions. Right? Lets say you have 2 "Save" (i.e. label=Save) buttons, one has name SUBMIT and the other SAVE ( SUBMIT and SAVE being the requests that will be sent when they are clicked , respectively)
    b. Make the Display condition on one of the buttons 'Never'. Now it won't show when you run the page. Lets say you made SAVE's conditional Display 'Never'
    c. Go and change the condition on all ApplyMRU and ApplyMRD processes from "When Button Pressed" to "Request is contains in Expression1". In Expression1 enter SUBMIT,SAVERegards

  • Can you create an image map that will link to a different element on the same page?

    I have used image maps before and know how to create an image map to link to a new page.  In this case, however, I want to be able to click on my image using an image map and load a new image with text on the same page as the image map.  Is this even possible?  Is there some sort of behavior that allows you to create same-page links, perhaps using AP divs?  I want the end result to be a type of gallery that loads different images depending on where you click on the main image.
    Again, I don't even know if this is possible.  Any suggestions on how to make this work would be greatly appreciated.
    Thank you!

    Go to this site and mouse over the image map of South America.
    http://alt-web.com/testing.html
    Is that what you are looking for?
    Insofar as linking to a position on the same page, do a Help search (F1) in DW for "named anchors."
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb
    www.alt-web.blogspot.com

  • How to make a link in a report open a Form in a different region of the same page ?

    Hi,
    I developped a report and a form for the same table. I also created a link and used it in my report so that when I click on the link of one record, the form is opened and display this record.
    My problem is that when I include my report as a portlet and I click on a link, the form is opened in full screen mode by replacing the page containing my report.
    What should I do in order to open this form in another region of the same page ?
    Thanks a lot

    I presume that the two regions are working fine with their individual buttons and your issue is how to make them both save with one button.
    Here is how
    a. You will have 2 ApplyMRU and 1 ApplyMRD processes for each of the regions. Right? Lets say you have 2 "Save" (i.e. label=Save) buttons, one has name SUBMIT and the other SAVE ( SUBMIT and SAVE being the requests that will be sent when they are clicked , respectively)
    b. Make the Display condition on one of the buttons 'Never'. Now it won't show when you run the page. Lets say you made SAVE's conditional Display 'Never'
    c. Go and change the condition on all ApplyMRU and ApplyMRD processes from "When Button Pressed" to "Request is contains in Expression1". In Expression1 enter SUBMIT,SAVERegards

  • Can I print the same image at different sizes on the same page?

    Hi everyone.
    I am trying to print a 5x7" image and 4 wallet sizes of the same photograph on 1 piece of paper. Can apperature do this? I'm just trying to utilize a whole sheet of paper.
    I've been looking at contact sheets to try this but it doesn't seem like it's going to work. I was hoping for a really simple way to do this but I cannot find it.

    I've not found a way to do that. The printing portion of the software is, at this time, somewhat rudimentary.

  • Read action from a different view in the same window

    Hi all,
    I have a view which contains a ViewContainerUIElement and a ButtonRow. A second view with form fields is embedded in the container of the first view. Validation of the form fields in the second view depends on the button pressed in the first view. How can I determine in the second view, the name of the action that is executed in the initial view?
    Thanks and regards,
    Patrick

    Patrick - I answer this question in a previous forum [Close a popup of another view being on the Main View;
    If you used the wizard in order to create the popup the wizard create a button "OK" that I'm guessing you change to "SAVE", you will need to create an EVENT HANDLER under your method list tab in my example my EVENT HANDLER is "SEARCH_RESULT" once the user click the "OK" button it will call SEARH_RESULT event and it will do your code inside the event.
      DATA LO_WINDOW_MANAGER TYPE REF TO IF_WD_WINDOW_MANAGER.
      DATA LO_API_COMPONENT  TYPE REF TO IF_WD_COMPONENT.
      DATA LO_WINDOW         TYPE REF TO IF_WD_WINDOW.
      data LO_VIEW_C         type REF TO if_wd_view_controller.
      lo_view_c = WD_this->wd_get_api( ).
      LO_API_COMPONENT  = WD_COMP_CONTROLLER->WD_GET_API( ).
      LO_WINDOW_MANAGER = LO_API_COMPONENT->GET_WINDOW_MANAGER( ).
      LO_WINDOW         = LO_WINDOW_MANAGER->CREATE_WINDOW(
                         WINDOW_NAME            = 'SEARCH_POPUP_WIN'
      *                  title                  =
      *                  close_in_any_case      = abap_true
                         MESSAGE_DISPLAY_MODE   = IF_WD_WINDOW=>CO_MSG_DISPLAY_MODE_SELECTED
      *                  close_button           = abap_true
                         BUTTON_KIND            = IF_WD_WINDOW=>CO_BUTTONS_OK
                         MESSAGE_TYPE           = IF_WD_WINDOW=>CO_MSG_TYPE_NONE
                         DEFAULT_BUTTON         = IF_WD_WINDOW=>CO_BUTTON_OK
    lo_window->subscribe_to_button_event( button = IF_WD_WINDOW=>CO_BUTTON_OK
      action_name = 'SEARCH_RESULT'
      action_view = lo_view_c
      is_default_button = ABAP_true ).
    *  lr_popup->open( ).
      LO_WINDOW->OPEN( ).
    the subscribe_to_button_event will call the event handler and it will trigger your code inside the event.
    Thanks
    Jason P-V

  • Read Attributes between different views in the same Component

    Hello,
    I have a attribute-D1 declared in VIEW1 and i need to read it into attribute D2 declared in VIEW2.
    I am planning to read it in DO_PREPARE_OUTPUT method of VIEW2.
    Can you please tell me how can i achieve this without having to create another context node (similar type to VIEW1) in VIEW2 and Binding it.
    Can't I just access the View Controller Class of VIEW1 to read it in VIEW2?
    Quick replies would be great.
    Regards
    Dedeepya C

    Hello again,
    I think i was not very clear in my earlier post. So il explain a bit more clearly this time-
    My requirement is to display a SEARCH+RESULT popup (view) onclick of a link; and the popup display has the result list already fetched for the SEARCH Criteria(defaulted).
    Now what i had to do was have the RESULT LIST TITLE display the number of records fetched.
    So my approach was to -
    1) READ the RESULT Size in EH_ONSEARCH of SEARCH VIEW.
    2) Form the Result Title using method  cl_crm_uiu_gen_tools=>get_result_title into a Public Ins Attribute GV_TITLE.
    3) READ the GV_TITLE from SEARCHVIEW into a local attribute in SEARCHVIEWSET (SEARCH VIEW + RESULT VIEW) LV_TITLE.
    data : lv_result_title type string,
      lv_view_controller type ref to ZL_SEARCHVIEW_IMPL.
      lv_view_controller ?= controller->get_subcontroller_by_viewname( 'Ztest/SearchView' ). "#EC NOTEXT
      if lv_view_controller is bound.
      lv_result_title = lv_view_controller->gv_result_title.
      endif.
      <thtmlb:searchFrame showSearchFields = "TRUE"
                          resultListTitle  = "<%= lv_result_title %>" >
      </thtmlb:searchFrame>
    Now, i noticed during debug, when the SEARCH Popup is triggered the 1st time, the control goes to SEARCHCVIEWSET.HTM 1st (GV_TITLE is initial at this point) and then goes to DO_PREPARE_OUTPUT where the Event Handler for SEARCH is called and where the GV_TITLE is set. Due to this the Result Tab gets the default title RESULT LIST
    Whereas the next time, when i click on SEARCH event on popup, the control 1st goes to EVENT HANDLER (where GV_TITLE is set) and then to SEARCHVIEWSET.HTM, this then sets the correct title for RESULT list.
    I need some pointers on why the control goes to SEARCHVIEWSET 1st before even DO_PREPARE_OUTPUT is called.
    How do i set the RESULT Title in the 1st instance to display the correct no. of records fetched.
    Any help would be appreciable.
    Regards
    Dedeepya

  • Can I print 2 different reports consecutively on the same page?

    I need to print two different reports on the same page. E.g.
    Page 1.
    Report 1
    Report 2
    --------------- page break ---------------
    Page 2
    Report 1
    Report 2
    --------------- page break ---------------
    Is there any way to ensure that the physical page in printer does not eject when Reports finishes printing Report # 1? Also Report # 2 could span to multiple pages, but Report # 1 will always be a fixed form report.
    Thanks for your help
    Aparna

    Hi Srini,
    I suppose I could do as you suggested, but then that would be a work around, not a solution... Actually the Report # 2 that I have can be called independently and hence if I do as you suggest, I would have to make the same report twice. Hence any other ideas?
    Thanks,
    Aparna
    null

  • Different CSS link effects on the same page?

    I have a CSS menu that looks good and works using the a:hover
    and a:link rules. I want to have the links on the rest of the page
    act differently. Can someone help me understand how to create
    different CSS rollover effects for different links on the same
    page? Pleas be specific, I’m not great with CSS or code in
    general.

    Pseudo-classes and container styles are what you need - here
    are some
    tutorials.
    http://www.mako4css.com
    http://www.thepattysite.com/linkstyles1.cfm
    http://www.projectseven.com/tutorials/pseudoclasses/index.htm
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "edwheels" <[email protected]> wrote in
    message
    news:ej2e5g$i4p$[email protected]..
    >I have a CSS menu that looks good and works using the
    a:hover and a:link
    >rules.
    > I want to have the links on the rest of the page act
    differently. Can
    > someone
    > help me understand how to create different CSS rollover
    effects for
    > different
    > links on the same page? Pleas be specific, I?m not great
    with CSS or code
    > in
    > general.
    >

  • 2 manually created tabular form on the same page based on 2 different table

    Hi, I followed the how to document on manually creating tabular form, including one extra row.
    The first form I created works fine, but when I attempt to create the second tabular form based on a different table on the same page, I get the following error message when I try to create the query:
    ORA-04045: errors during recompilation/revalidation of PUBLIC.X ORA-00980: synonym translation is no longer valid
    The logic behind both tabular forms I am using is the same, except that for the second query, I use 100 instead of 1, 300 instead of 3, etc:
    select htmldb_item.hidden(1,empno) empno,
    ename,
    htmldb_item.select_list_from_query(3,job,'select distinct job, job from emp') job,
    htmldb_item.popupkey_from_query(4,mgr,'select ename, empno from emp',10) mgr,
    wwv_flow_item.date_popup(6,null,hiredate) hiredate,
    htmldb_item.text(7,sal,10) sal,
    htmldb_item.text(8,comm,10) comm,
    htmldb_item.select_list_from_query(9,deptno,'select dname, deptno from dept') deptno
    from emp
    Can anybody help?
    Thanks a lot

    Hi,
    If by "100 instead of 1" you mean the column numbers, then this won't work as you can only have a maximum of 50.
    Andy

  • Filter the content on different queries for the same infoprovider and user

    Hello,
    We are trying to make the following security scenario in BI, and have
    problem with the analysis object concept to filter at query level.
    The idea is to permit to :
    - user A
      - to execute query Q1 and view information about sites 1,2,3
      - to execute query Q2 and view information about sites 4,5,6
    but for example for another user :
    - user B
      - to execute query Q1 and view information about site 1,3
      - to execute query Q2 and view information about site 5,6,7
    Q1 and Q2 are queries from the same infoprovider.
    The idea is to make an automatic generation of analysis objects based
    on the standard program : RSEC_GENERATE_AUTHORIZATIONS.
    During tests, we have faced a problem with the object 0TCTQUERY that we
    thought will permit us to filter at the query level, but unless we add
    the name on the query on a role in the S_RS_COMP authorization object,
    field RSZCOMPID, the query is not granted to the user.
    The fact that we use both authorization objects : one for the query
    definition, and another for the analysis authorization concept
    (S_RS_AUTH, field BIAUTH), has disastrous effect : all values given in
    the analysis objects are for all queries of an indicated infoprovider.
    With that system, it's then not possible to propose dynamically different
    views of the same data (ie from same infoprovider) based on the
    authorization concept unless using the technic of customer-exit variable,
    but with variable you will have a problem with old queries that doesn't
    have a variable and that will permit to see all data given in the new
    authorization objects.
    Is there exists another object to filter at the query level in the
    analysis objects ? If it's not the case, what is possible to do to reach
    our goal with the new authorization concept ?
    Thank you in advance for your help.
    Best regards,
    Gaël.

    The data is protected on infoprovider level and not on the query level,  so when two querys are build from the same Infoprovider then the authorizations are the same,
    To achieve what you want to do,  the querys must be built off different providers.   This can be achieved by placing the infoprovider in 2 differnt multiproviders and building the querys and authorizations seperatly on these.

  • Insert more than one contact in the same page/document

    Hello,
    I have tried without success to insert more than one contact into the same page of a document.
    For example, if i insert 2 Address book fields in a page, when i drag a contact from the address book then it populates automatically the 2 fields, and it is impossible to separate these fields and to populate them with 2 different entries (on the same page).
    And when you drag more than one contact to Pages, it asks you if you want to create one document per contact.
    Would it be possible to just insert 2 or more different contacts on the same page/document ?
    Thanks in advance for any help,
    Fred.

    Unfortunately, this can't be done with Pages, nor could it be done with AppleWorks. I think the assumption is that you would merge into a letter & one letter sent per person. In checking the 3 postcard templates in Pages 3, none of them have address book fields to drop contacts into.
    There is a workaround, but it might not be worth the effort. Create your postcard as a single, large document in page layout in landscape & merge to a new document. Then, in the print dialog, choose Layout from the drop-down menu that says Copies & Pages & choose 4 from the Pages per Sheet menu. You might also want to add a hairline border for cut lines.

  • Two forms that update differrent tables on the same page?

    I tried to add two forms that update different tables on to one page.
    Problem is when I do that the forms gives me an error saying the field does not exist. It's like it is trying to update one table with the other tables fields.
    As an example Say I have one forms that is for people table and another one that is the Jobs table.
    When I go to update the people table, it sends the data for the jobs fields too I get an error like the field job description does not exist.
    I have two different forms for these and everything.
    I would hope it is possible to have two forms that update different tables on the same page.

    I was trying the exact same thing, but i managed to work round it by setting the steps to hide one region, so the user would enter the form see one region submit the region then direct back to the same page with the different region visible and the original hidden.
    I don't know if this would be acceptable for you...

Maybe you are looking for