NB200-10Z - Freezes after turning on

Hi, I've used my NB200-10z for 6 months without any problems.
But today I couldn't turn it on right away. I have to turn on and off power button several times to get it working. The battery is charged and there is power supply.
After I press turn on button, the cooler swiches on, the HDD indicator is green and the picture "Toshiba Leading Innovation" appears. Then the HDD indicator turns down and the picture freezes. And then nothing happends. The notebook doesn't respond on the "F2" or "F12" keys. I turn it off and try to turn it again. After several times the OS starts and the notebook works perfectly.
This sutiation repeated again - I have to turn on and off power button several times to get it working.
Please, help me, what should I do that the notebook starts properly?

Hi
I am having the same kind problem, even worse!
I bought my NB200 Aug 2009, it has been working very well for me till about 2 weeks ago.
One day, I turned it off normally, second day morning, I tried to trun on, I only see power light, plugin light, battery charging light up., the HDD light flashed once for maybe 2-3 seconds, then fade away. And the screan remains blank all the way.
I tried remove battery, unplug, wait up to 3 hours, put everything back, it still not starting up.
Also I tried with different RAM, but result remains the same.
And the situation getting worse and worse. About 2 weeks ago, when it first started, after about 10 tries, I could get it start. This morning I had to try over an hour, and finally got lucky once.
So, anyone is having the same problem? Any suggestions?

Similar Messages

Firefox freezes after turning sync on

Hello
I have a strange problem that is driving me crazy for some time now (from firefox 5)
I am using firefox on two computers (pc and a mac(both windows and mac os)) which I guess makes 3 sync devices. I have a standard setup on all of those, no super fancy extensions. Only adblock, firegestures, scryptish and such and I've been using them for quite some time.
From firefox version 4 I decided to move from xmarks to firefox sync. Initially I had no problems but since version 5 something went wrong. All my firefox installations started to freeze for 2-3 seconds few times a minute. Clearing the profiles, reinstalations do nothing. Later on I found out that all this starts when I enable syncing. If I install all my stuff but leave sync off firefox works well. If I just turn it on freezes come back. I decided to delete my sync account and make a new one (was thinking about some corrupted preferences) and to be safe I synced only bookmarks,passwords and history. I left preferences unchecked. Obviously before doing that I cleared profiles on all my browers + did uninstall. After basically starting my firefox network from scratch everything was fine ... for a week. Now problem is back and I don't know what to do. Starting firefox in safe mode seems to help tho. Any ideas how to fix or debug this?
EDIT: Forgot to add that disabling sync doesn't help
Victor

The "solution" reported in [https://bugzilla.mozilla.org/show_bug.cgi?id=670064#c12 bug 670064 comment 12] was, <br>'''Quote:'''<br>''I then used the Clear Recent History feature to delete all of my history, and then i unticked the History option in Sync preferences. Since then, the problem has disappeared. I also have not been able to reproduce a lock-up on any version or machine that didn't involve history synching having been activated at some point or another ...''
My guess is that something was corrupting the browsing history (which is stored in the file'' places.sqlite'', along with bookmarks). If the problem resurfaces, I would try using the [[Clear Recent History]] feature to clear everything from browsing history and unsync History, as in the bug report comment (you could later re-sync History to see what happens). See also: http://kb.mozillazine.org/Locked_or_damaged_places.sqlite#Corrupt_places.sqlite

Zen V Plus freezes after turning on, despite resett

I've had my Zen V for about 2 years now. It broke down 6 months after i bought it, i gave up on it and got another Mp3 player sometime afterwards, which is guess what, the Creative Zen, which died as well (i resurrected it using the keep-on-resetting method).
Anyway my Zen V turns on, and freezes. They screen forever shows Rihanna's Unfaithful and no matter what I press, nothing will happenk, until I reset it. Then it turns on and same thing repeats.
Help anyone? ?

Hi Srslyvplus,
Have you tried Clean Up?

Safari Freezes after turning Privaate Browsing off

When I go to settings and turn my private browsing off, most the time I go back to Safari and it freezes or crashes. This happens 95% of the time. How can I fix this? Is this a known bug?

Try terminating and restarting Safari:
1. Press the Home button
2. Double click the Home button to bring up the "Recent Apps" tray.
3. Touch and hold on the Safari icon in the "Recent Apps" tray until a "-" appears.
4. Touch the "-" to terminate Safari.
5. Restart Safari and see if the problem is solved.
If that does not work try restarting and resetting your iPad.
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

IMac freezes after turning on. Nothing happens. What should I do?

My iMac is able to start up, but it suddenly freezes on the apple logo with a white background. It stays like this for hours and nothing still happens. It's able to be turned off however but other than that, nothing.

Please carefully read Apple's Mac OS X: Gray screen appears during startup article. You can find it at:
http://support.apple.com/kb/ts2570
I suspect your machine may have suffered a hardware failure.
BTW when posting without a basic profile of your computer troubleshooting is difficult at best. If you don't know how to do a profile please click https://discussions.apple.com/docs/DOC-3602

Elements 13 will not download, when I attempt to sign in after entering my pass word the instruction block freezes up, turns white and little square blocks turn around ?

Elements 13 will not download, when I attempt to sign in after entering my pass word the instruction block freezes up, turns white and little square blocks turn around ? Nothing seems to work and yes it is the right password.

Is the internet working when you are entering your password? In PSE12 and PSE13, you need to be online first-time when you register/activate your product. It is made mandatory for reasons I don't know.

My ipod only goes to the apple screen and freezes then turns off after about a minute. Is this fixable?

My ipod only goes to the apple screen and freezes then turns off after about a minute. Is this fixable?

Try a system reset. It's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.

After turning my mac on the icons pop up at the bottom of the screen and than after 2-3 seconds the computer freezes and I can't open anything up. I did a hardware test and everything was fine. How do I get the computer to stop freezing

After turning my computer on the icons come up on the bottom and then the computer freezes. I have done a hardware test that shows no problems. I can move the arrow around the screen but everything freezes after the icons pop up on the bottom of the screen. Any suggestions?

After turning my computer on the icons come up on the bottom and then the computer freezes. I have done a hardware test that shows no problems. I can move the arrow around the screen but everything freezes after the icons pop up on the bottom of the screen. Any suggestions?

I have iPad air, screen freezes after FaceTime call and cannot get back to home screen, have to power down and turn back on to get back to home screen. What am I doing wrong?

I have iPad air, screen freezes after FaceTime call and cannot get back to home screen, have to power down and turn back on to get back to home screen. What am I doing wrong?

Hi RWD2,
Welcome to the Support Communities!
To resolve your issue with Facetime freezing when you end a call, I would try the first three steps in the article below.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If you are using Wi-Fi, it may be helpful to try these troubleshooting steps as well:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398?viewlocale=en_US
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including previously connected Wi-Fi networks and passwords
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
I hope this information helps ....
Have a great day!
- Judy

Msi p45 platinum - freezes after power save turns off displays

Just put this computer together, everything is stock, no overclocking. Seems to run fine, played a few hours of modern warfare 2 with no issues.
I noticed It seems to freeze after the monitor gets turned off by the power save mode. I just tested this by setting it to turn off displays after 1 minute of inactivity, waited watched the monitor turn off, then I went to the move the mouse and the screen came back on but the cursor would not move. sometimes the screen will not even come back on.
I have turned the computer on, left the room while it was booting to eat breakfast or take a shower, came back the screen was still on but the computer was frozen. Window 7 login screen was up, but there were some graphic glitches. this has happened a couple of times.
If I manually put the computer to sleep it seems to come back properly.
msi p45 platinum 1.6 bios, optimized defaults loaded
e5200 intel dual core @2.5 ghz, 200FSB 12.5 multiplier
4 x 1gb ddr2 (800mhz, nanya brand)
nvidia gtx 260 (195.63 drivers x64)
win7 ultimate x64
enermax 720w powersupply

I think it might be the video card or power supply. Was building two systems,
second system has identical motherboard, processor and ram,
galaxy gts 250 instead of the evga gtx 260.
antec 430 earthwatts instead of Enermax EIN720AWT 720W Power Supply
Installed from same OS disc and same set of drivers. Second system seems to operate the powersave mode for the monitor correctly. Will have to do some testing switching videocards tonight.

I Have Compaq 6200 Pro Microtower Pc..THE SCREEN TURNS WHITE & FREEZES after 8 -Minutes of usage

I have an HP Compaq 6200 Pro Microtower PC.
I cant use in recent times, about two weeks now. The screen turns white and freezes after about 8-10 minutes of been in use. when this happens, the FAN spins at extraordinary fast speed and this will continue for as long as possible until i have to press and hold the power button to off it.
I have changed processor, powerpack, cooling fan, memory and hard disks but the problem persists.
This PC is an i5- 3.10ghz, 4gb ram, 320gb hdd, ...windows 7 professional 64 bits.
I need urgent help. Technical advice. What could be the course of this and what do i need to DO?

Start the PC in 'safe mode' and check in device manager for new graphics drivers, it sound like you drivers are either out of date or corrupted, the screen going white and computer responding is a symptom of this.
safe mode uses VGA drivers and these should not freeze giving you ample time to complete these steps.

A1145 imac g5 isight, freezes after 2-5 mins and then there no power from keyboard and mouse. Changed HDD and no luck and on the install page it freezes. You have to force it to shutdown and leave it for 5-10 minutes and try to turn it on again AHT Passed

A1145 imac g5 isight 2.1GHz
, freezes after 2-5 mins and then there no power from keyboard and mouse. Changed HDD and no luck and on the install page it freezes.
You have to force it to shutdown and leave it for 5-10 minutes and try to turn it on again
Apple HardWare Test Passed
10.5.11
Orginal DVD's 9.2

Could be a heat problem.
Also, try these:
Resetting the SMU on a G5 iMac:
http://support.apple.com/kb/HT1767
and on resetting the PMU on a Power Mac G5, G4 and G3 :
http://support.apple.com/kb/HT1939?viewlocale=en_US
http://support.apple.com/kb/HT1436

After I restored my iPhone 4, I click Configure.. and it freezes and turns off. help?

I´ve tried to restore my iPhone 4 twice now, and every time I get to the configuration thing (after turning on the iPhone) it just crashes and restarts?
And when I plug it in to my mac, iTunes just say: There is a problem with your iPhone
Does anyone else have the same problem or know a solution? If so.. please help me. Its really annoying.

You'll have to force it into recovery mode and restore it again (see http://support.apple.com/kb/HT1808). If it continues to fail, you'll have to restore it as a new iPhone, without using your backup.

BSOD on NB200-10Z while installing Win XP

Hi guys,
I am having problem to install XP on my new netbook nb200-10z. When I boot from USB after the message "Windows is starting" I get the blue screen of death.
I have SATA contoller mode turned to Compatibilty. I have downladed NB200 SATA drivers, extracted them, integrated them into Win installation with nLite, but still no result.
Where am I getting wrong.
Please help. I am missing something for sure but what....
Thanks in advance...

The problem was in bootable USB drive I think. It is important how You make the bootable USB drive. The process of making bootable USB drive is important. I was using WinToFlash and did not succeeded, My friend gave me the bootable USB drive made in another program he can not remember what is it's name and then I have succeeded. And one more thing about Wireless not working on WinXp, it is needed to install HotKeys for display devices and the problem is solved...

My NB200-10Z will not boot

I have a Toshiba nb200-10Z PLL20E-00200JEN
and it keep refusing to boot all what happens is when you press the power button no display flashes and the hd lite flickers once then nothing the power button lite stays on and the little power lite,
then leave it and 1 in twenty time it will boots normally and works normally till I switch it off
I have just had it twelve months on two weeks but this is something which has been happening for a couple of months but on now got very bad I thought it was a virus and spent weeks trying to solve it, but no it definitely the computer

Hi, i'm a new member who happens to have same problem before, but i was helped by this post from another tech-
forum. hope this will help you too, if you still have the problem.
this is from a friend with screen name, trowboyd:
I have found a fix for this. I do computer repair for a living and have now repaired two nb200's with this fault. Here's how:
1) Get the computer to post and boot. There's a few ways to do this if it will NEVER post. You can leave the computer off for around 2 months. I had one which never posted no matter what I tried. After leaving it sit around for about 2 months, I tried again and it posted and booted, but once it warmed up again it wouldn't post again. You can also try putting it in your car overnight to cool it down, or lastly you can try the freezer trick. Once you have it booted to windows, DON'T restart or power down as it may not post again.
2) Download the latest BIOS update for your NB200 which is v2.1. Make sure it's for the correct part number which can be found on the back of your nb200.
3) Connect your power lead and make sure the nb200 has at least 50% charge.
4) Install the v2.1 BIOS update.
Both nb200's I have repaired like this would only post intermittently before this v2.1 BIOS update. As I mentioned, 1 of them wouldn't post at all for two months. Both nb200's were initially running the v1.2 BIOS. Immediately after this v2.1 update, both nb200's post and boot every time, even when i have left them running near a heater in a hot room. Basically fixed.
You can find out what BIOS version you have on the main page of the BIOS setup screen.
So, get it to boot, and flash to the latest bios update. hope this helps.

NB200-10Z - Freezes after turning on

Similar Messages

Maybe you are looking for