NB200-10Z powers up but the screen is blank
Hi
i have a Toshiba netbook NB200-10Z.
It powers up but the screen is blank.
Can anyone help me coz i don't know the cause to it
Hi
Try this:
Remove the battery and disconnect the AC adaptor.
Then wait a little bit (1 hour should be enough)
Then connect both parts again and try to power up your NB200.
If its not a serious issue, then your NB200 should power up properly.
Otherwise its a serious issue and you will need an professional help from an ASP technician.
Similar Messages
-
G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help! Pressed pmu button already, nothing ,.. Ppc g4 Mac
Should I check the memory cards themselves? Reseat them?
Yes.
Memtest X or Rember to test the RAM.
Reseat is also good.
The iPhone 4 doesn't like USB 1.1 much.
after the update the computer was working well, except for this freeze when ever I connect iPhone.
I'd try USB 2.0 PCI. That's how I connect my iPhone 4s, and have connected all iPhones and iPods, to my G4.
Never an issue.
Can't say the same for USB 1.1.......
The above (previous post) linked PCI card is cheap enough.
Want cheaper, try this:
http://www.amazon.com/Protronix®-5-Port-Controller-Card-Chipset/dp/B005JE2U82/re f=sr_1_2?ie=UTF8&qid=1337472141&sr=8-2
The NEC chipset is the desired chipset, regardless of what OS the maker says is compatible.
OS X has native NEC chipset USB support. -
The mac book air powers up but the screen stays black?
the macbook air powers up but the screen stays black?
Try resetting your SMC and PRAM. If neither work, contact Apple and have it looked at.
Resetting the System Management Controller >>
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G + 120G OCZ Vertex 3 SSD Boot HD -
I was updating my ipad 2 and got it disconnected and its not responding,giving a blank screen with apple logo. when i connect it to itunes then it is giving an error that enter your passcode but the screen is blank how can enter my passcode?
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
I cannot view my updates on the App Store, the app icon shows 2 updates,but the screen is blank. Need advice.
I have the same problem.
I think there's a problem with the update server. Try again later. -
After downloading the latest version of iTunes, the store will not load. It appears as if it has loaded, but the screen remains blank.
I have the same problem and have been fighting with it for several days. I think the last thing that I did before this happened was to let Quicktime update itself. When I open itunes and click on store, the connecting bar gets halfway and then stops. That leaves me with the white store page, if I leave it alone for a bit, I see words as in names of singers and but no pictures.
I have ran the diagnostics and see no problems at all, no event logs in windows, no errors at all. I've un-installed itunes and re-installed but no change. I'm using Norton 360 from comcast. I have windows 7 pro 64 bit. Also, the help in itunes doesn't display.
I put in a ticket with apple and the response I got back basically told me to do what I've already done. I created a new user and have the same issue.
Any help at all will be very much appreciated. I think this started August. 8, 2011.
thanks so much for reading -
App Store icon shows three updates, but the screen is blank when I try to update my ipad
App Store icon shows three updates, but the screen is blank when I try to update my ipad
Already covered in a discussion that has over 180 threads to it. Search before posting please or just simply look down the list of current topics. It's readily near the top.
https://discussions.apple.com/thread/5194126?tstart=0 -
my ipod got wet and allow time to dry, I turn now the musics and sound and everything but the screen is blank and nothing is visible. a solution please urgent.
See my reply to your other post
-
My computer turns on and the light at the botton is on, but the screen is blank. I have tried pressing every button, turning it on/off, and also pressing the mouspad.
I have the same problem, the start up sound plays through the speakers but nothing on the screen
-
My iPod touch will not power on.; The charger is plugged in but the screen is blank.
My iPod Touch will not power on. charger is plugged in but the screen is blank.
Hello Dennisom,
The troubleshooting detailed below can help get your iPod Touch to charge.
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge until your device turns on. This could take between 10 and 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue persists, please contact Apple Support.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
Cheers,
Allen -
I spilled coffee on my MacBook. I dried it for 24 hours. It turns on, the keyboard lights up but the screen is blank. Any help?
Make an appointment at an Apple store genius bar for a free evaluation.
Ciao. -
I have a HP Touchsmart 300-1020 that powers up but the screen stays black. help!
I've been experiencing problems intermittently after shutting my TouchSmart 300 PC down. For the past few days when trying to turn it on ; the screen stayed black! I could hear the fan start rapid then slow down, I can see the green internal light blinking inside and lights on the outside of the computer but still nothing on the screen! I've tried plugging it into different outlets around the house was successful with one, but then, came the error message;
Page fault in nonpaged area. Today I tried to turn it on and I got the same thing described above. The computer's operating system is Windows 7 64-bit, purchased Feb. of last year and is refurbished.Hi
You have a couple of options as I see it please run the Hard drive and Memory test check if both off then passes if any fails then you need to replace the part. If test passes you could try The F11 option to do system restore Or to do a recovery on the unit before doing recovery kindly back up data as it will be lost web link given below this will help you to let you know how to do the steps.
Troubleshooting Error Messages on a Black Screen that may Occur During Startup or Boot
Testing a Hard Disk using the Built in Self Test
Restore the PC to its original condition using the f11 key
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
Hello.
I recently woke up this morning to use my iPod Touch (2nd Gen) to find that it was completely unresponsive to both buttons and would not turn on. I had been using it the night before and had not charged it. Thinking the battery was drained, I plugged it into a wall outlet for two hours, and still no sign of life on the iPod. Plugging it into the computer, it immediately showed up in iTunes and synced normally, and even indicated it had nearly a full charge. Still, however, the screen showed nothing. I checked the lock and home buttons to see if it was stuck, but it was not. Does anyone have an idea of what this is? Do I need to get my iPod repaired? Any help would be appreciated.
I am running iOS 4.1, and am out of warranty coverage.
Thanks,
- Justin1; Do a hard rest by holding the buttons at least 15 seconds. Does the Apple logo come on?
2. Hold the power button down for at least 5 seconds. Do you see the battery symbol?
If the answer is no to both questions, you most likely have a hardware issue--possible bad battery.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
I-Mac is on, but the screen is blank
I turned on my mac today, the initial white screen came on as usual, the start up tone went off, and then the screen went completely blank.
I can hear it is still on, and when I press keys, such as volume, they all sound but I can't see anything?
I've tried switching it off and pressing control, option, p,r ... and that didn't change anything.
I've tried unpluggging it, and pressing the on button for 5 seconds, that didn't work either ...
I don't really know what to do.
I accidently switched on voice over the other day, and although I've got the voice to switch off, I can still hear occasional noises from that, so I don't know if that is an issue?The screen is black. I intially didn't reply, because after I posted last week, it5 suddenly switched back on again and worked as if there was never a problem (apart from the fact I couldn't adjust the brightness level for a day)...
I have just pulled out the plug (I can't see to shut it down properley) and then started it up again with the OS X DVD, I was holding down C as I switched it on. It stayed on the white "I'm thinking about it screen" for a long time, while the disc was whurring away.
Eventually the screen turned to black again, and the disc stopped making noises. Then it stayed black and the disc started doing ...something again.
Still can't see anything.
Someone suggested that this happens if you leave the computer on too long ... -
TS1382 ipod will play music but the screen is blank
The ipod will play music but I can not see the screen. It remains blank.
By blank I assume you mean completely white is that correct?
If none of the usual 5 R's of troubleshooting do any good, you'll need to have the iPod either serviced or replaced as the LCD screen or ribbon cable is damaged or faulty.
http://www.apple.com/support/ipod/five_rs/nano3gen/
B-rock
Maybe you are looking for
-
My i phone wont let me take any more photo
every time i try to take a new pic on my phone 4s when i press to take the pic its coming stright back to my main screen anyone know what i can do
-
Handling flat files in 'pass through' mode
Is it possible to handle text files in PI in a pass through mode, i.e. just picking them up from a file adapter, and using another file adapter to send them out e.g. via FTP? Our customer wants to use the traceability of PI to do this. There would be
-
Part of photo attachments is grey
when i receive a photo attachment the most part of the photo is grey i am using 10.7.5. Is there a way i can fix it? thanx
-
Share Everything to Share Nothing
What do I have? 2 basic phones on a family plan - 500 shared minutes that I never use for $59.99 (50+9.99) VZ would never let me change to a lower minute plan even though we use a negligible amount of shared minutes. Still we kept overpaying becaus
-
Hey guys do any of you have a standrad iSight too? For some reason, the built in iSight's colours are a little burned (black is so dark) but my standard iSight shows up brighter (both through the iMac's screen). So, in short: Standard iSight: brighte