NB200 broadband not turning on in Windows 7

Hello All,
I have installed windows 7 to an NB200-12J netbook and the mobile broadband is not turning on.
I have installed all the Toshiba drivers regarding 3G networking in [http://aps2.toshiba-tro.de/wlan/?page=3gdownloads].
When I press the Fn-F8 combination the icon no matter what I do always remains to Off. The Wifi and Bluetooth however, are turning on and off as expected.
The status in the wireless manager is that the radio is turned off and prompts to turn it on through the switch.
I have also run the toshiba automated drivers installation tool provided in http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/bulletin.jsp?ct=SB&soid=2450599&ref=EV but the broadband is still not turning on. Everything worked normally under Windows XP so far.
Thank you for your help.

Hi nifer,
Thank you for your help. You are right about the sim card i have read this somewhere as well. The SIM card is inserted correctly, actually i have used the 3g connection in windows xp without problem many times. The issue came up when i installed windows 7.
The output to the log file when i have queried the bradband modem is the following:
ATQ0V1E0 - OK
AT+GMM - F3507g
AT+FCLASS=? - +FCLASS: (0)
AT#CLS=? - COMMAND NOT SUPPORTED
AT+GCI? - COMMAND NOT SUPPORTED
AT+GCI=? - COMMAND NOT SUPPORTED
ATI1 - R1D06
ATI2 - COMMAND NOT SUPPORTED
ATI3 - Ericsson
ATI4 - COMMAND NOT SUPPORTED
ATI5 - Configuration Settings on Channel 5
&C: 1
&D: 2
*EIAC: 1,1,"Ericsson"
*EIAC: 2,1,"PS Account 2"
- COMMAND NOT SUPPORTED
ATI6 - COMMAND NOT SUPPORTED
ATI7 - PC Card Configuration Profile
Product Type PCI Express Mini Card
Interfaces USB
I am also trying to send now the AT+CFUN=1 command to the com3 that the modem is assigned to enable it but i haven't figure out the way so far.

Similar Messages

Why not turn off restore windows?

I really don't like the restore windows feature. I want my computer to only open to the desktop. But one site I saw disabling it is "overkill" and suggests downloading a third party app that lets you at least select which app windows to open or not. What advantage am I missing out on by turning it off altogether?

What are you missing out on? It is one of the over 250 new features of the World's Most Advanced Operating System called Resume.
When choosing Restart, Sleep or Shutdown there is a checkbox you can uncheck to prevent the apps from launching.
Also in System Preferences > General there is a hard-to-find checkbox under "Number of recent items" you can turn off.
Also, you can hold the shift key to disable resume on a one time basis.
If you want to turn it off on a per app basis, (TextEdit is by example, replace TextEdit with the name of the app)
Launch Terminal and copy/paste this at the prompt...
defaults write com.apple.TextEdit NSQuitAlwaysKeepsWindows -bool false
Press return.
To turn off Resume globally...
chflags uchg ~/Library/"Saved Application State"
Press return
The reverse of the first one is to replace false with true.
The reverse of the second one is
chflags nouchg ~/Library/"Saved Application State"

Computer not turning off

I have a friends old Tiny brand computer with a Micro Star MS-6340 Ver 1.0 mainboard in it
For some reason the computer will not turn off after windows shuts down, also then computer turns on when the mains socket switch is pushed down and not when pressing the on/ off switch on the front of the case.
Thinking it may the wiring on the switch at fault i dissconected the case wires from the on/off switch and the mainboard but the computer still powers up when the main switch is turned on!!
Any help on this problem would be much appreciated. Thanks

Quote from: bluesBOY23 on 07-November-06, 06:06:06
also then computer turns on when the mains socket switch is pushed down and not when pressing the on/ off switch on the front of the case.
This line confused me, which part are you talking about?
In regards to the power up with the switch when the power switch is disconnected from the mainboard are you sure it is disconnected and you didn't disconnect something else?
As for the not shutting down this is probably a windows problem with the APCI. I usually resolve it with a reinstall of windows since it is usually due by the time this happens.

Dell XT2 Upgrade to Windows 8, Embedded WWAN Not Turned On

I've been working on a friend's computer, and upgraded her Tablet/Laptop Inspiron XT2 (originally with XP Media) to Windows 8 Pro. The laptop has an embedded (believe it's the 5600) WAN card for Verizon. I got the driver installed from Dell's website, yet Verizon's Broadband software (VZAccess) tells me it's not turned on. I've checked hardware switches, the fn+f4 (or whichever combo it was), looked in network connections, checked using Unknown Devices to detect, and still no avail. In device manager, the only unknown devices are the fingerprint reader and the touch screen, which makes me think the wwan card is properly installed, just not being detected by connection manager. Any ideas on how to proceed?

I've been working on a friend's computer, and upgraded her Tablet/Laptop Inspiron XT2 (originally with XP Media) to Windows 8 Pro. The laptop has an embedded (believe it's the 5600) WAN card for Verizon. I got the driver installed from Dell's website, yet Verizon's Broadband software (VZAccess) tells me it's not turned on. I've checked hardware switches, the fn+f4 (or whichever combo it was), looked in network connections, checked using Unknown Devices to detect, and still no avail. In device manager, the only unknown devices are the fingerprint reader and the touch screen, which makes me think the wwan card is properly installed, just not being detected by connection manager. Any ideas on how to proceed?

Ipod 4g 32G not turning on, not charging (on multiple cords, both comp and wall, 4 20min), not being detected by Itunes or Windows 7 64bit OS, will not reset, tried taking it out of "DFU", NO DMG, Itunes up2date, All I'm getting is a blank black scrn

Ipod Touch 4th generation 32G not turning on, not charging.
I have used multiple cords on both computer USB and wall USB converters. I let it sit there for over 20 min with each attempt.
It is not being detected by Itunes or my Windows 7 64bit OS. I have tried all 4 of my USB ports (both USB 2.0 and 3.0), with 3 different chargers.
Holding home and power button will not reset.
Tried taking it out of "DFU" mode but Itunes won't detect it, I didn't think that would work anyway.
NO DAMAGE, I have been very careful with it, aside from a few minor scratches. (that you can't even see unless the light reflects them)
My Itunes is up to date, as is my OS.
All I'm getting is a blank black screen. It has been working fine on this computer before. I have no idea what could have happened. I'm at my wits end here.

See if you missed anything here:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

IPod Nano 7th gen not turning on but recognized by iTunes and Windows

My two-month old 7th gen iPod Nano is not turning on. I've reset and restored it using both Windows (My Computer) and iTunes and have downloaded the and installed the latest version of iTunes. It was working fine and now just will not turn on. It is being recognized by Windows as a removable disc and by iTunes as an iPod that I can sync data onto.
I've tried the 'hold the power button for 5 seconds' trick to try to manually reset it, as well as other variations with pressing down on the power and menu keys simultaneously. The iPod is new, ordered online and the nearest Apple Store is over 2 hours away from where I live.
Please help?

Hello, M.Ram.
Thank you for visiting Apple Support Communities.
I understand that the screen on your iPod nano is black, but is recognized by iTunes. Take a look at the troubleshooting article below as it may provide some troubleshooting steps that may help. However, if the issue persists, see the section labeled Issue not resolved.
iPod nano (7th generation): Hardware troubleshooting
-Jason H.

I set up Keychain and do not have access to the telephone I gave. Now I can no longer connect my ipad to my windows computer. I can not turn off Keychain...it is awaiting authorization from the SMS on the telephone I do not have access to.

I set up Keychain and do not have access to the telephone I gave. Now I can no longer connect my ipad to my windows computer, itunes does not automatically open when I plug in the USB. I can not turn off Keychain in my ipad since authorization is pending awaiting the code sent by SMS, which I can not get. Can someone advise how to get rid of Keychain. Should I cancel my icloud account?

I appreciate your help.
Have reset the ipad, but that changed nothing. I can not turn off Keychain, iit remains "pending approval". Probably, the only thing to do is to close my icloud account...which I hate to do since there is a lot of data saved there. But, I am unable to back the ipad up on my Windows 8 computer because itunes no longer opens when the ipad is attached.
Oh well...computers are computers and it is impossible to cover 100% of the situations.
Keychain iss not the best app for someone who lives in 3 different countries.
Thanks

I clicked all the buttons in the file sharing window and now my iMac will not turn on.

I really goofed. I clicked all the buttons in the file sharing window (Screen sharing;File Sharing...Remote Login; Remote Management...Internet sharing) but I did not write down the IP address and now the computer will not turn on at all. Is there a way to roll back my stupidity and get this thing to turn on again?

There's only one thing you can do: make an appointment with Apple genius at the Apple retail store for a out of warranty replacement.

WINDOWS 8 SCREEN SAVER NOT TURNING ON

I have a TouchSmart with Windows 8 and the screen saver will not turn on. Will work in preview but will not function. Have tried all available screen savers and applied all with no luck. Any ideas out there?

It was a long shot --
It does seem that if you want to splay a picture on the screen after a certain time, then you should be able to do so.
It might be the same as letting the screen "rest" in darkness, saving the screen, making the world a better place, all of that:
The computer should work the way you expect when the feature is offered to work a certain way.
Just some ideas...
All the settings for your "Screen Saver" should be set to just less than any "dimming" or "display off" settings
Have you tried setting the Screen Saver to "None" and seeing if the screen can at least go to "dark" after the set time? That would be something - it would tell you that the mechanism is working.
Related to Above:
Try setting Background to None, set the time to say a minute less than the time you let the display dim/go-off, Reboot the computer to make sure the setting is "in place", and then test.
Have you tried using one of your own pictures? If you do not have one, try downloading a picture from a location you trust - say from NASA if you are interested in "Things that are Star-Stuff"
The issue may be related to screen resolution vs. the resolution of the photo or "saver" you are trying to use. There may be some sort of conflict. This goes back to choosing either a different screen resolution or a different photo.
Do you have an extra monitor attached? There may be a resolution conflict with the extra monitor if you have "extended view" set and the two resolutions are not compatible in some bizarre fashion. Even if there is no conflict; if you do have an extra monitor attached, try turning if off and see if it makes a difference.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
See a Post that is useful, makes you smile, or that teaches you something you did not know?
Your HP Experts are here to help.
Click the Kudos Star to say Thanks for the Help.
When a fix / workaround is successful:
Click this Post "Accept as Solution" to make it easier for others to find the Solution.
Year of the Dragon 2012 Year of the Snake 2013
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Kind Regards,
Dragon-Fur

When tryed to run diagnostic test windows blacked out then blue screen ipad will not turn on now

when I ran a diaganostic test windows blacked out and then the "blue screen of death"........and now my ipad will not turn on ......has anyone had this problem ?...if so...what now

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Can not turn on wireless after Windows vista install driver issue?

Hi all,
Not sure if this is the right place for the post, if not I apologies in advance.
I have a Compaq Presario C700 (C730EM) on which the hard drive died on me, I brought a new one and installed Windows vista premium from disk (not a backup / recovery disk).
All seems fine however I can not turn on the wireless, the C700 has a wireless button on the top left hard side (which has a red LED when not on). Normally you push this and it turns on (turns LED Blue) but nothing!
I have commented wired and updated windows etc. and have tired to find wireless driver which I guess I’m missing? Not sure if it’s wireless driver missing or a keyboard driver?
After installing a few drivers which I thought where right no joy!
Can anyone help?
Cheers
P
This question was solved.
View Solution.

You're very welcome!
A beer sounds great!

Upgrade to Windows 10 by using my notebook as a tablet does not turn the screen

I realized that after doing my upgrade to Windows 10 by using my notebook as a tablet does not turn the screen (al realizar mi actualizacion a windows 10 mi laptop ya no gira la pantalla en modo tableta... y es 360 grados.. como lo resuelvo??? gracias!!!

i have the same problem with my envy x2 13 j002dx. tried reinstalling drivers and windows 10. the auto rotate button is there but doesnt do anything when i toggle it

Ipod will not turn on, itunes will not open, window says ipod is in recovery mode and needsto be restored

ipod will not turn on, itunes will not open, window pops up says ipod is in recovery mode and needs to be restored. what do i do now?

You restore the iPod via iTunes. Don't plug the iPod in. Open up iTunes and then plug it in and then try restoring, if it fails to restore a few times, keep trying. I do it on a daily basis, you're using an Apple product, remember...
EDIT: Do it from another computer if all else fails.

T420 windows 8.1 Manage Bluetooth devices will not turn on

I have a T40 that I upgraded from windows 7 to windows 8, and recently to windows 8.1, blue tooth device act flaxy and when I go to "Manage Bluetooth devices". I have a bluetooth logictech v470 mouse which works most of the time and a bluetooth headset Hype (HY-91)
I have 2 issues:
1. can not turn on the slider to turn bluetooth on easily. - I finally get it turned on after awhile by double clicking, waiting, or just luck, not sure why it just does not just go on.
2. I have trouble with my Bluetooth headset device the second time I connect no matter what I do unless I reboot or re-pair the headset it will work.
I thought it could it be related to two bluetooth devices, but I powered down the mouse. I thought skype was causing an issue, but I quit it and made sure it was not running in the background.
I did find if I turned off the internal speakers and internal mic only then the headset works properly.
Any ideas?

Well my problem is now solved, both devices are bricked, Apple Store replaced both devices today, After talking with my daughter had the iPad mini was charging and it updated iOS8.1.3 and then bricked, tried all the things you suggested with both devices. Yes, I agree about not letting my devices die, this was the first time my phone had died in 5 months but I firmly believe iOS 8.1.3 was the cause of both devices demise. Apple checked both devices and promptly replaced both in about 30 minutes. I hope this is not the way Apple is planning on continuing with software updates. I have 10 apple devices and have been a strong supporter of their company, but these kind of half done updates are the reason I removed all Microsoft products from our household 7 years ago!

Preparing to configure windows please do not turn off windows server 2008 r2

Preparing to configure windows
Please do not turn of your computer.
We see this skin a long time (3 Hours) but server not start. If we remove LAN cable on the server then the server automatic run but exchange server all services not run automatic and user can't connect to the Exchange 2010 SP3.
Md. Ramin Hossain

Hi,
This problem occurs when the Windows Modules Installer Service was stuck during stopping or starting.
Checkou the below link for article on similar problem,
http://www.petenetlive.com/KB/Article/0000657.htm
Regards,
Gopi
JiJi
Technologies

NB200 broadband not turning on in Windows 7

Similar Messages

Maybe you are looking for