NB200 - C000021A error and blue screen appears

Hi folks, I am having this following problem with my mothers notebook a Toshiba NB200-10g. Basically it's had a virus or a few viruses the last few days. Downloaded avg and malwarebytes hoping to solve it and it found problems but pop ups were still appearing and viruses being found.
Anyway today it will now upon starting go through to the windows boot up part then as it goes to where the login screen would be the screen flashes blue for the blink of an eye and the error message C000021a comes up about fatal system error and the computer shuts down and restarts x1000
I've read a bit about this problems and seems to be down to the fact winlogon.exe will be missing or corrupted by the virus. I have tried all different modes of starting safe mode,last known config etc. My major issue is I have no usb stick to load anything from and the notebook does not have a CD drive so my options are very limited. Next plan would have to be to take it to the shop tomorrow and get them to run a windows recovery program but the problem is I will end up having to lend her my laptop tonight. Is there anything I can do at all? Tried f2 and f12 to enter bios nothing much I can change. Tried f8 and all the different start up modes no joy. Have I any other options at all?
Thanks
Just to add, Pressing and holding 0 and then letting go when it switches on is meant to be how to get it to reset although it comes up HDD RECOVERY at the bottom of a blank page for about a second them XP tries to boot up again? Seems a bit strange.

Hi
Well, it seems you cannot do anything else as to reinstall the OS again.
Maybe the HDD recovery would still be available on the HDD. So try this HDD recovery.
Maybe this Toshiba HOWTo would be helpful:
http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=58
If the HDD recovery would not be available, then you could try to reinstall the Win XP using an Microsoft disk in connection with USB stick.
Here you can find more details how to create an bootable USB stick.
http://wiki.eeeuser.com/windowsxpusb
Good luck

Similar Messages

IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

If nothing else works, you might try this one. It has worked for many others ...
Use iTunes to do a reset to factory default condition. Always be sure to do your backups before fiddling with your iPad. You might do both the iCloud and the iTunes backup, just to be sure!
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414
Various issues from many different users have been solved by this. I've lost count on how many have been helped by this, so far. But, it doesn't mean EVERYONE will be helped, but I've seen a whole lot. You can only try and see ...
iPad 2 and iOS 8.0.2 Problems
For all iPad 2 owners, this is an important solution for you! These problems result from long-term use, continuous upgrades, corrupted files and various glitches that happen over this long term use. You just need to get your iPad 2 back to FACTORY FRESH CONDITION to start out clean!
Here's one person's solution which will help a lot of iPad 2 users!
keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
SOLVED: IOS 8 Issues on iPad 2:
I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
THE FIX: FIRST, be sure you have a current iCloud backup of your device. Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now! :-)
Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you.

ITunes 9.2 causes fatal error and "blue screen of death"

I installed Itunes 9.2 this morning and whenever I tried accessing this version of Itunes, my system hangs and showed me the infamous “blue screen of death”. I have tried uninstalling and reinstalling Itunes but nothing seems to work.
Anyone encountering this problem and is there any way to solve this? Thanks!

I was using v9.1.1.12 and could not synch my iphone with outlook although with other versions there was no problem so was keen to install the new version of iTunes yesterday (9.2.0.61). Installation went fine, iTunes opened up perfectly and read my music library and hey presto synched my phone with outlook. I was well pleased. Closed down itunes and went back to working A couple of hours later as my secretary had updated my calendar I plugged in my iphone and itunes started to open then.... disaster. The blue screen appeared.
I restarted again, and again and again and the same thing happens everytime iTunes was opened (independently or when plugging my iphone in). Tried 4 times.
I did a repair using itunes installer. No change stilled blue screened when opened. I then had the bright idea of uninstalling iTunes totally and reinstalling. No change - itunes begins to open then causes blue screen.
The next step I uninstalled itunes. Did a disk defrag and then thought I would reinstall version 9.1.1.12 and install the newer version over the top. But hey you have guessed it, the older version would not open because the library it was using had been created with a newer version i.e. v9.2.0.61 - nice one iTunes!!
So at the moment I have no iTunes at all so am stuffed. So, iTunes solves one problem but creates another. Do they ever check these things???
Help!!

Error and Blue screen with pc suite

Hello
Recently I am having a problem wid nokia pc suites. After putting the notebook on sleep or hibernation, when i resume windows, i get an error message saying rundll32 has stopped working. details of the error is as follow -
Problem signature:
Problem Event Name:   APPCRASH
Application Name:   rundll32.exe
Fault Module Name:   USER32.dll
Locale ID:   16393
Sometimes i get the blue screen randomly with the same error details.
The problem gets solved when I have uninstalled pc suite. I have tried with 2 different versions, 7_1_18_0 and   7_1_26_0
but i am having this issue with both the versions.
Details of my system are - Vista Home Premium, Service pack 1, 32 bit, 3 gb ram , intel core2 duo. Connectivity mode is cable and bluetooth

Hello
Recently I am having a problem wid nokia pc suites. After putting the notebook on sleep or hibernation, when i resume windows, i get an error message saying rundll32 has stopped working. details of the error is as follow -
Problem signature:
Problem Event Name:   APPCRASH
Application Name:   rundll32.exe
Fault Module Name:   USER32.dll
Locale ID:   16393
Sometimes i get the blue screen randomly with the same error details.
The problem gets solved when I have uninstalled pc suite. I have tried with 2 different versions, 7_1_18_0 and   7_1_26_0
but i am having this issue with both the versions.
Details of my system are - Vista Home Premium, Service pack 1, 32 bit, 3 gb ram , intel core2 duo. Connectivity mode is cable and bluetooth

Two PCIe-6537 read error and blue screen of death

Hi all
I am reading two PCIe-6537 at 20MHz sample rate acquiring all 32 lines each with externally supplied clock and external trigger.
When operating separately, no problem, but when two are read I get
a) on average of 25% of time error reading the data (time out error but happening before the actually time set by timeout, i.e. immediately after trigger) and
b) a blue screen of death after 1h or so of constant operation.
I have a feeling a) and b) are related and LV causes the system crash with so many errors. NI support seems to think otherwise.
I am using Dell Studio XPS 8100 and I have done all the firmware updates for the Chipsets etc. It has
not changed anything.
Changing single line to whole port reading does not change anything.
Any ideas what to try else?

Hello Pawel,
I have looked over the service request you mentioned about acquiring 2 PCIe-6537 at 20MHz sampling rate on all 32 lines. In order to narrow down this issue, I think it would be best to try only acquire from both cards without doing any triggerring etc. Also when performing this test, I would only want to acquire from 8 channels on both cards to see if this reproduces it. If this works, we can slowly add more elements to narrow down what the issue is and make us more effective to solve the problem.
I also wanted to ask if you have tried this setup on another machine and if it worked.
Along with this, have you tried to create two Digital Tasks in MAX and try to acquire for the same amount of time to see if the issue reoccurs here? This would tell us if this problem is connected to the driver/computer or LabVIEW.
Jim St
National Instruments
RF Product Support Engineer

Fatal error and blue screen using iTune 6.05.20 under Window XP pro

I just downloaded and upgraded my iTune to 6.05.20 and having serious problems which I can't even play a song for more than 5 sec. If I click PLAY, my computer will hang and display a quick blue screen(too quick I can't get the exact error)then restarts. I can't find the older version I had anywhere, so any help please.
Im using Creative Audigy2 ZS pro. never had a problem with iTune untill this version.

we can also try using the following technique to slow down that flash of a blue screen, to try to get some more information from it:
1) Open your system control panel (Start->Control Panels->System).
2) Select the "Advanced" tab.
3) Click the "Startup and Recover" section's "Settings" button
4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.
what text and numerical codes do you see? (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
here's a reference on the sorts of things i'm asking about:
Troubleshooting Windows Stop Messages
if the blue screen cites a specific file, also let us know what it's called. precise spelling and filename extension, please.

Hp g6 2122he getting display shaking and stak and blue screen appears

recently i change new hp g6 2122 motherboard because geting auto restart so then i change mother board
after mother board changed getting diskplay shaking then blue screen, correctly i fixed all things display cable and touchpad and speaker wire everything is correct but getting same problem and i changed ram and hard disk but same problem
any solution !!

Hi,
Honestly speaking there are a lot of possibilities for an issue of this magnitude to happen and it will be better if you can send the Notebook in for a Bench Repair to get all the issues take care of.
Please contact HP over the Phone/E-mail/Chat. If you are in the USA/Canada, please contact HP over the Phone at 1800-474-6836.
HP US Support: http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=uk&lc=en
HP Worldwide Support: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Please find more details for contacting HP from the link below:
http://www8.hp.com/us/en/contact-hp/contact.html
!------------------- Please click the KUDOS star on the left to say 'Thanks'. Please mark 'Accept as Solution' if it answers/solves your problem. Thank you-----------------------------------------------------------------!
I am an HP Employee.

Dmp file and blue screen error Windows 7

Hi,
Just wondering if someone can tell me how to read the dmp file created after the blue screen appears ?
I have just recently upgraded my Toshiba P300 from Vista 64 bit to Windows 7 Home Prem 64 bit.
I dont know why Windows 7 keeps crashing and so far I have no idea of how to open the .dmp
file (I have zipped the dmp file and attahced below).
http://cid-7a99d6152c55359c.skydrive.live.com/self.aspx/.Public/minidump/022710-26223-01.zip
The message that I been given so far says :
Problem signature:
Problem Event Name:                        BlueScreen
OS Version:                                          6.1.7600.2.0.0.768.3
Locale ID:                                             3081
Additional information about the problem:
BCCode:                                               a
BCP1:                                                    FFFFF6FC40052000
BCP2:                                                    0000000000000002
BCP3:                                                    0000000000000000
BCP4:                                                    FFFFF80002E62322
OS Version:                                          6_1_7600
Service Pack:                                       0_0
Product:                                               768_1
Files that help describe the problem:
C:\Windows\Minidump\022710-26223-01.dmp
C:\Users\Caroline\AppData\Local\Temp\WER-125393-0.sysdata.xml

I have try step 1 and didnt boot up the window normaly...same thing happened
Window 7 is loading...then boom the screen failed and blue screen appear...
there is the latet crash report
Version=1
EventType=BlueScreen
EventTime=129810543666556864
ReportType=4
Consent=1
ReportIdentifier=9fb6a978-99f3-11e1-9b67-fa9a72be4846
IntegratorReportIdentifier=050912-14508-01
Response.type=4
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7601.2.1.0.256.1
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=3084
UI[2]=C:\Windows\system32\wer.dll
UI[3]=Windows has recovered from an unexpected shutdown
UI[4]=Windows can check online for a solution to the problem.
UI[5]=&Check for solution
UI[6]=&Check later
UI[7]=Cancel
UI[8]=Windows has recovered from an unexpected shutdown
UI[9]=A problem caused Windows to stop working correctly. Windows will notify you if a solution is available.
UI[10]=Close
Sec[0].Key=BCCode
Sec[0].Value=a
Sec[1].Key=BCP1
Sec[1].Value=0000000000000000
Sec[2].Key=BCP2
Sec[2].Value=0000000000000002
Sec[3].Key=BCP3
Sec[3].Value=0000000000000001
Sec[4].Key=BCP4
Sec[4].Value=FFFFF8000308BB7E
Sec[5].Key=OS Version
Sec[5].Value=6_1_7601
Sec[6].Key=Service Pack
Sec[6].Value=1_0
Sec[7].Key=Product
Sec[7].Value=256_1
File[0].CabName=050912-14508-01.dmp
File[0].Path=050912-14508-01.dmp
File[0].Flags=589826
File[0].Type=2
File[0].Original.Path=C:\Windows\Minidump\050912-14508-01.dmp
File[1].CabName=sysdata.xml
File[1].Path=WER-27253-0.sysdata.xml
File[1].Flags=589826
File[1].Type=5
File[1].Original.Path=C:\Users\Moz\AppData\Local\Temp\WER-27253-0.sysdata.xml
File[2].CabName=Report.cab
File[2].Path=Report.cab
File[2].Flags=196608
File[2].Type=7
File[2].Original.Path=Report.cab
FriendlyEventName=Shut down unexpectedly
ConsentKey=BlueScreen
AppName=Windows
AppPath=C:\Windows\System32\WerFault.exe
ive also have got a AI SUITE II crash...
Version=1
EventType=APPCRASH
EventTime=129809041249476693
ReportType=2
Consent=1
UploadTime=129809041250516752
ReportIdentifier=ddea075d-9895-11e1-9a9f-eb38eba38a41
IntegratorReportIdentifier=ddea075c-9895-11e1-9a9f-eb38eba38a41
WOW64=1
Response.BucketId=2555721005
Response.BucketTable=1
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=AI Suite II.exe
Sig[1].Name=Application Version
Sig[1].Value=1.0.0.40
Sig[2].Name=Application Timestamp
Sig[2].Value=00000000
Sig[3].Name=Fault Module Name
Sig[3].Value=KERNELBASE.dll
Sig[4].Name=Fault Module Version
Sig[4].Value=6.1.7601.17651
Sig[5].Name=Fault Module Timestamp
Sig[5].Value=4e211319
Sig[6].Name=Exception Code
Sig[6].Value=0eedfade
Sig[7].Name=Exception Offset
Sig[7].Value=0000b9bc
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7601.2.1.0.256.1
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=3084
DynamicSig[22].Name=Additional Information 1
DynamicSig[22].Value=0a9e
DynamicSig[23].Name=Additional Information 2
DynamicSig[23].Value=0a9e372d3b4ad19135b953a78882e789
DynamicSig[24].Name=Additional Information 3
DynamicSig[24].Value=0a9e
DynamicSig[25].Name=Additional Information 4
DynamicSig[25].Value=0a9e372d3b4ad19135b953a78882e789
UI[2]=C:\Program Files (x86)\ASUS\AI Suite II\AI Suite II.exe
UI[3]=AI Suite II has stopped working
UI[4]=Windows can check online for a solution to the problem.
UI[5]=Check online for a solution and close the program
UI[6]=Check online for a solution later and close the program
UI[7]=Close the program
LoadedModule[0]=C:\Program Files (x86)\ASUS\AI Suite II\AI Suite II.exe
LoadedModule[1]=C:\Windows\SysWOW64\ntdll.dll
LoadedModule[2]=C:\Windows\syswow64\kernel32.dll
LoadedModule[3]=C:\Windows\syswow64\KERNELBASE.dll
LoadedModule[4]=C:\Windows\syswow64\WINTRUST.DLL
LoadedModule[5]=C:\Windows\syswow64\msvcrt.dll
LoadedModule[6]=C:\Windows\syswow64\CRYPT32.dll
LoadedModule[7]=C:\Windows\syswow64\MSASN1.dll
LoadedModule[8]=C:\Windows\syswow64\RPCRT4.dll
LoadedModule[9]=C:\Windows\syswow64\SspiCli.dll
LoadedModule[10]=C:\Windows\syswow64\CRYPTBASE.dll
LoadedModule[11]=C:\Windows\SysWOW64\sechost.dll
LoadedModule[12]=C:\Windows\syswow64\ADVAPI32.DLL
LoadedModule[13]=C:\Windows\system32\VERSION.DLL
LoadedModule[14]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.17514_none_ec83dffa859149af\COMCTL32.DLL
LoadedModule[15]=C:\Windows\syswow64\GDI32.dll
LoadedModule[16]=C:\Windows\syswow64\USER32.dll
LoadedModule[17]=C:\Windows\syswow64\LPK.dll
LoadedModule[18]=C:\Windows\syswow64\USP10.dll
LoadedModule[19]=C:\Windows\system32\MSIMG32.DLL
LoadedModule[20]=C:\Windows\syswow64\SHELL32.DLL
LoadedModule[21]=C:\Windows\syswow64\SHLWAPI.dll
LoadedModule[22]=C:\Windows\syswow64\OLE32.DLL
LoadedModule[23]=C:\Windows\syswow64\OLEAUT32.DLL
LoadedModule[24]=C:\Windows\system32\IMM32.DLL
LoadedModule[25]=C:\Windows\syswow64\MSCTF.dll
LoadedModule[26]=C:\Windows\system32\CRYPTSP.dll
LoadedModule[27]=C:\Windows\system32\rsaenh.dll
LoadedModule[28]=C:\Windows\syswow64\imagehlp.dll
LoadedModule[29]=C:\Windows\system32\ncrypt.dll
LoadedModule[30]=C:\Windows\system32\bcrypt.dll
LoadedModule[31]=C:\Windows\SysWOW64\bcryptprimitives.dll
LoadedModule[32]=C:\Program Files (x86)\ASUS\AI Suite II\AsMultiLang.dll
LoadedModule[33]=C:\Windows\system32\WINSPOOL.DRV
LoadedModule[34]=C:\Program Files (x86)\ASUS\AI Suite II\ImageHelper.dll
LoadedModule[35]=C:\Windows\WinSxS\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.7601.17514_none_72d18a4386696c80\gdiplus.dll
LoadedModule[36]=C:\Windows\system32\USERENV.dll
LoadedModule[37]=C:\Windows\system32\profapi.dll
LoadedModule[38]=C:\Windows\system32\GPAPI.dll
LoadedModule[39]=C:\Windows\system32\cryptnet.dll
LoadedModule[40]=C:\Windows\syswow64\WLDAP32.dll
LoadedModule[41]=C:\Windows\system32\SensApi.dll
LoadedModule[42]=C:\Windows\system32\Cabinet.dll
LoadedModule[43]=C:\Windows\system32\DEVRTL.dll
LoadedModule[44]=C:\Windows\system32\WindowsCodecs.dll
LoadedModule[45]=C:\Windows\system32\WINHTTP.dll
LoadedModule[46]=C:\Windows\system32\webio.dll
LoadedModule[47]=C:\Windows\syswow64\WS2_32.dll
LoadedModule[48]=C:\Windows\syswow64\NSI.dll
LoadedModule[49]=C:\Windows\system32\credssp.dll
LoadedModule[50]=C:\Windows\syswow64\mswsock.dll
LoadedModule[51]=\\.\globalroot\systemroot\syswow64\mswsock.dll
LoadedModule[52]=C:\Windows\syswow64\WININET.dll
LoadedModule[53]=C:\Windows\syswow64\Normaliz.dll
LoadedModule[54]=C:\Windows\syswow64\iertutil.dll
LoadedModule[55]=C:\Windows\syswow64\urlmon.dll
LoadedModule[56]=C:\Windows\system32\Secur32.dll
LoadedModule[57]=C:\Windows\System32\wshtcpip.dll
LoadedModule[58]=C:\Windows\System32\wship6.dll
LoadedModule[59]=C:\Windows\system32\IPHLPAPI.DLL
LoadedModule[60]=C:\Windows\system32\WINNSI.DLL
LoadedModule[61]=C:\Windows\system32\dhcpcsvc6.DLL
LoadedModule[62]=C:\Windows\system32\dhcpcsvc.DLL
LoadedModule[63]=C:\Windows\syswow64\CFGMGR32.dll
LoadedModule[64]=C:\Windows\system32\uxtheme.dll
LoadedModule[65]=C:\Windows\system32\DNSAPI.dll
LoadedModule[66]=C:\Program Files (x86)\Bonjour\mdnsNSP.dll
LoadedModule[67]=C:\Windows\system32\rasadhlp.dll
LoadedModule[68]=C:\Windows\System32\fwpuclnt.dll
LoadedModule[69]=C:\Program Files (x86)\ASUS\AI Suite II\AssistFunc.dll
LoadedModule[70]=C:\Windows\system32\PROPSYS.dll
LoadedModule[71]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2\comctl32.dll
LoadedModule[72]=C:\Windows\system32\apphelp.dll
LoadedModule[73]=C:\Windows\syswow64\CLBCatQ.DLL
LoadedModule[74]=C:\Windows\system32\wpdshext.dll
LoadedModule[75]=C:\Windows\system32\WINMM.dll
LoadedModule[76]=C:\Windows\System32\shdocvw.dll
LoadedModule[77]=C:\Windows\SysWOW64\ieframe.dll
LoadedModule[78]=C:\Windows\syswow64\PSAPI.DLL
LoadedModule[79]=C:\Windows\SysWOW64\OLEACC.dll
LoadedModule[80]=C:\Windows\syswow64\SETUPAPI.dll
LoadedModule[81]=C:\Windows\syswow64\DEVOBJ.dll
LoadedModule[82]=C:\Windows\system32\ntmarta.dll
LoadedModule[83]=C:\Program Files (x86)\ASUS\AI Suite II\pngio.dll
LoadedModule[84]=C:\Program Files (x86)\ASUS\AI Suite II\AsAcpi.dll
LoadedModule[85]=C:\Program Files (x86)\ASUS\AI Suite II\asacpiEx.dll
LoadedModule[86]=C:\Windows\system32\RpcRtRemote.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
State[1].Key=DataRequest
State[1].Value=Bucket=-1739246291/nBucketTable=1/nResponse=1/n
FriendlyEventName=Stopped working
ConsentKey=APPCRASH
AppName=AI Suite II
AppPath=C:\Program Files (x86)\ASUS\AI Suite II\AI Suite II.exe

Blue screen appears on startup and at shutdown

A few months ago, I bought a macbook pro and it was doing fine. But recently, every time it starts, a blue screen appears for a split second then it goes to log- in. Then, every time I shutdown, it will also show up for a split second then shutdown. It doesn't affect the computer but I'm just wondering how to stop it.

I couldn't rember what time it started so, I shut down my computer and the blue screen appereed at 8:39:28. But went I turned it on, the blue screen did not show. So, I turnned it of and on again and no blue screen. I did it several times and now the blue screen isn't showing. But I will post the test that showed in the concel during 8:39, when it powered of blue, to the time I powed it on, when the blue screen did not show. If you need more, I will try to give it to you. I'll post again if it shows up again. Also I should edit out ethernet address too right?
Here's what its says:
8:38:07 PM kernel: I0Surface: buffer allocation size is zero
8:38:47 PM kernel: I0Surface: buffer allocation size is zero
8:39:28 PM mds: (Error) Server: ==== XPC handleXPCMessage XPC_ERROR_CONNECTION_INVALID
8:39:28 PM com.apple.launched.peruser.501: (com.apple.talagent.[236]) Exited: Killed: 9
2/19/12 8:39:28.145 PM
com.apple.launchd.peruser.501
([0x0-0x18018].com.apple.iTunesHelper[284]) Exited: Killed: 9
2/19/12 8:39:28.145 PM
com.apple.launchd.peruser.501
([0x0-0x13013].com.apple.AppleSpell[260]) Exited: Killed: 9
2/19/12 8:39:28.147 PM
com.apple.launchd.peruser.501
(com.apple.mdworker.pool.0[452]) Exited: Terminated: 15
2/19/12 8:39:28.203 PM
loginwindow
DEAD_PROCESS: 36 console
2/19/12 8:39:28.467 PM
shutdown
halt by ___________:
2/19/12 8:39:28.467 PM
shutdown
SHUTDOWN_TIME: 1329701968 466888
2/19/12 8:39:54.000 PM
bootlog
BOOT_TIME 1329701994 0
2/19/12 8:40:06.000 PM
kernel
PMAP: PCID enabled
2/19/12 8:40:06.000 PM
kernel
Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
2/19/12 8:40:06.000 PM
kernel
vm_page_bootstrap: 986092 free pages and 54292 wired pages
2/19/12 8:40:06.000 PM
kernel
kext submap [0xffffff7f8072f000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072f000]
2/19/12 8:40:06.000 PM
kernel
zone leak detection enabled
2/19/12 8:40:06.000 PM
kernel
standard timeslicing quantum is 10000 us
2/19/12 8:40:06.000 PM
kernel
mig_table_max_displ = 73
2/19/12 8:40:06.000 PM
kernel
TSC Deadline Timer supported and enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
2/19/12 8:40:06.000 PM
kernel
calling mpo_policy_init for TMSafetyNet
2/19/12 8:40:06.000 PM
kernel
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
2/19/12 8:40:06.000 PM
kernel
calling mpo_policy_init for Sandbox
2/19/12 8:40:06.000 PM
kernel
Security policy loaded: Seatbelt sandbox policy (Sandbox)
2/19/12 8:40:06.000 PM
kernel
calling mpo_policy_init for Quarantine
2/19/12 8:40:06.000 PM
kernel
Security policy loaded: Quarantine policy (Quarantine)
2/19/12 8:40:06.000 PM
kernel
Copyright (c) 1982, 1986, 1989, 1991, 1993
2/19/12 8:40:06.000 PM
kernel
The Regents of the University of California. All rights reserved.
2/19/12 8:40:06.000 PM
kernel
MAC Framework successfully initialized

TS1541 a blue screen appears after a gray screen with the logo and the spinning gear

start up problem...a blue screen appears after the gray screen and the spinning gear

Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk. You could have some directory corruption. Let us know what errors Disk Repair reports and if DU was able to repair them. This could just be a start in repairs and you may need a better utility to finish the job.
Then Repair Permissions.
No need to report any Permissions errors........we all get them.
 DALE

When i try to open a web page, a blue screen appears and it is telling me " safari cannot open the page because i am not connected to the internet. i have an iphone, no problem and a laptop with connection - no problem - not sure what the trouble is.

when i try to open a web page, a blue screen appears - message says - sarfari cannot open the page because it is not connected to the internet. i have an iphone - no proble and a laptop - no problem as well.
what is wrong?

There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.0 r32
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

Nah - that's just the normal boot process.
Clinton

HT4177 My mackbook pro suddenly freezed and when I swiched off and on again, a grey screen appeared with an apple logo then a loading circle underneath, and after a few hours, a blue screen appeared. What shall I do with this?

My mackbook pro suddenly freezed and when I swiched off and on again, a grey screen appeared with an apple logo then a loading circle underneath, and after a few hours, a blue screen appeared. What shall I do with this?

What operating system version, and do you have any backups of your data off the machine? TimeMachine? Option Key bootable clones? Storage? DVD's?
A reinstall of the operating system may be in order as a last resort, so if any of these steps on these links get you into the machine, make sure to backup your personal data (Music, Pictures, Documents, Movies) off the machine to a non-encrypted powered external drive regular storage drive (not TimeMachine as it might be corrupted too) and disconnect as soon as possible.
Good Luck and report back all what you tried.
Also report what change occured before this tragedy happened, was there a Software Update? A EFI firmware update? Etc.
https://support.apple.com/kb/TS3148
more:
https://support.apple.com/kb/TS2570
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8963.html
To boot off the 10.6 install disk, hold c or option key while the disk is in the machine.
To boot into 10.7 Recvoery mode, hold the command and r keys down while booting.
To use Safe mode, hold down the Shift Key while booting.
Other assistance
https://support.apple.com/kb/HT3964
https://support.apple.com/kb/HT1379
https://support.apple.com/kb/ht1782
https://support.apple.com/kb/HT1564

Blue screen appears

I've bought my S10e in April 2009. it worked properly until a month ago when i was browsing, this blue screen appears suddenly and Windows (XP SP3, home edition) restarts. It happens too fast that i cannot read the message. after logging in this message rises: the system has recovered from a serious error.... and i send the issue to Microsoft. I use Google Chrome as browser. I think when i'm online using WiFi, it happens. I uninstalled chrome but it happened again with Firefox when it tried to open a web page reporting the problem to Microsoft.
I used the check disk tool in Windows but didn't help. I've two drives, Windows run on C: capacity=30 GB, free space=4 GB.
I've run CCleaner to optimize registry before these blue screens.
I also have Kaspersky Internet security installed on my netbook. it works fine.
I've got all Microsoft updates.
Is it the problem of bios? or what?
please help me because i'm very dependent on my S10e.
Thanks

Hi and welcome,
... if that happen again.. look in system event log file...there could be a hint whats going wrong..
How to view and manage event logs in Event Viewer in Windows XP
on the first look ...your free space 4GB ... .. due huge temp data near full .. keep an eye of this ...
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Sometimes Blue screen appears on Satellite M70

Hi there
I must express my overwhelming frustration with my satellite M70 laptop as I have it for more than a year now(warranty expired) and almost from the get go it had a problem in wich a blue screen appeared and the pc reboots...from the error report it is a problem with the graphics card and/or display driver.
I did take it to my local retailer for repair but the problem still remains(gone there 3 TIMES! each time waiting for more than a month for repair!and they did send it to toshiba service...)... as the problem doesnt happen *all the time* it seems they just didnt notice or something :(.
I did update all the drivers but it had no effect on the problem...
So now what?? Do I send it to repair and they finally replace the graphics card...but I pay??!!
This is all very upsetting for me as you might imagine...
And know its worse...it seems to be happening more and more...and many times the computer wont reboot after the bluescreen...it just stays black.
Now almost every time i turn it on it wont boot...the fan will just work for a few seconds and thats it.
Im almost certain the graphics card is defective...can I replace it at home? Argh this just feels wrong, the computer had this problem almost from the start and I sent it for repair...they just did not fix it...I shouldnt have to pay to fix it as I sent it for repair 3 times while it still had the warranty...
Please reply I'm desesperate and have no idea what to do

Hi Andrej and thanks for the reply
But the thing is I have already done that countless times...and the problem is still there...same old same old :(
I have tried seemingly everything...thats why I say its gotta be hardware :S
Having this in mind Id like to know if there is anything I can do(concerning hardware) without resorting to Toshiba service
Keep in mind that Im pretty sure it is the graphics card that is faulty(I dont know if its onboard or not)
Also sometimes when I turn it on the graphics on my pc go weird like an abstract painting or something lol...thats another reason to think its the graphics card.
So anyone can help me?
Thanks in advance for your replies :D

NB200 - C000021A error and blue screen appears

Similar Messages

Maybe you are looking for