NB200 - Can't update BIOS, error 1072

I cannot upgrade to New Bios 1.90 for NB200, error 1072, someone could do it?
Thanks.

*resolved.*
After the first attempt, if not possible, then
Copy the Folder "WINPHLASH" FROM C:\Windows\Temp to es. Desktop and run Winphlash.exe from there.
Thanks.

Similar Messages

Can not update BIOS R830-14U

Notebok Satellite R830-14U (part ? PT32LE) with BIOS 2.70 & EC 1.10
after upgrade Intel Management Engine Interface v.7.1.52.1176 i can not update BIOS - error "This computer is not supported"
http://ru.computers.toshiba-europe.com/innovation/dodriverLanguage=42
The ME Interface provides thermal management for Intel Mainboards. The Intel Management Engine Interface (Intel ME Interface) is the interface between the Intel Management Engine firmware and the host. Drivers and applications on the host that wish to interact with Intel Management Engine through host interface would use the Intel ME Interface host windows driver.
Model: Tecra R850, Portege R830, Satellite Z830, Qosmio F750, Portege Z830, Satellite Pro S750, Tecra R840, Satellite R830, Satellite Pro R850, Satellite R850
Downgade Intel Management Engine Interface to 7.00.02.1164 and/or reinstall Value Update Pack (vap-2011-614162421.zip) does not solve the problem.
What else can I do to fix this problem?

The problem is solved in complete restoration of the image of the disaster

Tecra S11 - After HDD replacement I can't update BIOS

My Hard Disk in Tecra S11 died, and I have purchased a new SSD.
Everything work OK, but I can not update BIOS any more. Update utility show an error:
Error: Preparing to update was failed.
You have not given permission to execute the update.
What to do? Please help.

> Error: Preparing to update was failed.
> You have not given permission to execute the update.
Do you have Admin rights?
Sounds like the issue could be related to missing privileges which are needed to run a update.
You could enable the admin account following these steps:
Choose command prompt (the black box cmd)
In the box type net user administrator /active:yes
Then log out. Usually an additional user account should be visible Administrator.
Now log in using this account and try to execute the BIOS update.
Note: in many cases the VAP (value added package) is needed to run the update BIOS.
Be sure also, that package has been unzipped correctly before running the exe file.

I can't update itunes, error message comes up, can't update the older version of bonjour contact your technical support

I can't update itunes, error message comes up, can't update the older version of bonjour contact your technical support

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

How can i Update Bios of HP DC7800, I have old Bios version of 2007.

How can i Update Bios of HP DC7800, I have old Bios version of 2007.

To find your updates page start here- choose which DC 7800 you have, on next page choose OS- then you will land on driver/software page.
http://h10025.www1.hp.com/ewfrf/wc/pfinder?cc=us&lc=en&query=DC+7800&tool=s-002&dlc=en#Z7_LAI0GH40KG...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Hi can't update bios

I can't update bios on Lenovo 3000 n200 because when I boot from cd and I start procedure to update, the bios did not see my ac power and keep asking to connect that. What can I do???

Hi
Welcome To Lenovo Community
We are really sorry to hear about the issue you are facing,
Please try disconnecting all cable and battery from the unit , Now press the power button for 30-40 sec then release , perform this action 4 -5 times , Connect Battery & Ac adaptor . Now charge the battery fully.
Once battery is changed completely now try to update the Bios
Do give this a try and let us know
Hope This Helps
Cheers!!!
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español

Can't update BIOS boot logo

Hi,
I've tried changing the BIOS boot logo of my Thinkpad E420, but a specific image isn't working, for some reason. I use the last "BIOS update utility", being 1.26, from here. No error shows up during the upgrade.
http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT037710
This is what I should do to change the BIOS Logo:
* NOTES ON CUSTOM START UP IMAGE                                    *
* THIS VERSION OF THE FLASH UPDATE PROGRAM GIVES THE OPTION OF      *
* REPLACING (OR ELIMINATING) THE DEFAULT "LENOVO" IMAGE THAT IS     *
* DISPLAYED DURING SYSTEM START UP.                                 *
* GUIDELINES FOR CUSTOM START UP IMAGE:                             *
* 1. THE IMAGE FILE SIZE IS LIMITED TO 30KB.                        *
* 2. RESOLUTION OF THE IMAGE SHOULD BE LESS THAN 640X480.           *
* 3. VALID FORMATS FOR THE IMAGE ARE AS FOLLOWS:                    *
*        BITMAP (.BMP) FILE FORMAT                                   *
*        JPEG (.JPG) FILE FORMAT                                     *
*        GIF (.GIF) FILE FORMAT                                      *
* STEPS TO ENABLE CUSTOM START UP IMAGE:                            *
* 1. PREPARE YOUR IMAGE AND COPY IT TO THE SAME PLACE WHERE         *
*     WINUPTP.EXE EXISTS.                                            *
* 2. RENAME THE IMAGE AS FOLLOWS.                                   *
*         BITMAP FILE --> LOGO.BMP                                   *
*         JPEG FILE --> LOGO.JPG                                     *
*         GIF FILE --> LOGO.GIF                                      *
* 3. RUN WINUPTP.EXE AND FOLLOW INSTRUCTIONS.                       *
* AFTER YOU UPDATE THE BIOS ON YOUR SYSTEM, YOUR LOGO WILL          *
* APPEAR ON THE STARTUP SCREEN.                                     *
Interestingly, this image work as it should:
https://www.dropbox.com/s/600u9o08a1ax1wp/LOGO_OLD.jpg
But this one don't:
https://www.dropbox.com/s/hrayfjslyv57o53/LOGO.JPG
I never get any error during the update, I click "YES" on the popup "Custom image was found, do you want to use it", but if I chose the second image, I get a black screen at the BIOS logo (Computer continue booting normally, and I can access the BIOS - but I have a black screen).
What's wrong with the second image? How is the second image different from the first one, that does work? I don't get it. :/
I can also succesfully restore the BIOS logo to the Default, if I delete LOGO.JPG from the update folder.
Thanks for the help.

Hi GameX,
the only difference that I can see immediately is something which caused me problems with a particular web publishing software once, took me ages to find the bug. Your second picture has JPG as the ending, the first jpg - maybe the utility is case sensitive on file endings??
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Can't Update BIOS of my MSI GTX580 Twin Frozr 2 OC....!!!! Help ASAP....!!!!

Hi guys from Greece....!!! I Have a major problem here and i need your help ASAP...!!!
I've purchased and a computer technician installed on my PC a brand new MSI GTX580 TwinFrozr 2 OC...!!
The problem is that my GTX580 has the old BIOS Version and i have to update it....!!! No matter how many times i tried to update it with Live update 5 it didn't work at all...!!! Live update 5 doesn't begin at all ..it always pops up an error message...!! Then i did a research in the forum and tried to update the BIOS with the Method of a USB stick Boot...... i did the exact things as needed but i just can't update it at all....!!! Will MSI release another Version of Live Update that it will work.???? Is there another way to update to the latest BIOS under Win7 .???? I have Win7 32-bit version....!!! Please help me, i'm freaked out ...!! I paid almost 500 Euro for this Card...!!!
Every advice/help will be welcomed....!!! Thanx for reading my topic...!!!

Quote from: STAM on 30-April-11, 01:52:11
I downloaded the rar that you attached , did what you told me to do ...i run GPU-Z and it shows that the BIOS version is the number 70.10.17.00.01 ,Is this the latest bios or is it the old one.????
This number will remain the same.
If you want to check current VBIOS version installed:
Get this: https://forum-en.msi.com/index.php?action=dlattach;topic=147603.0;attach=7931
extract it somewhere, then run info1 , and look for the last line and tell what it is

Installed successfully, but can't update. Error "Serial Number is not for qualifying product"

I installed Adobe Creative Suite Production Premium (CS5) on a new PC (Windows 8.1). Installation was successful. I uninstalled it on old PC and de-activated it. My problem is that I can't Update. Without Updates, I can't read newer Canon photos (so I can't use Bridge or PhotoShop). In doing the install the first time, I put in an incorrect Adobe product number (I think from Elements 8.0, which I purchased years ago). I have re-installed twice using the correct serial number, but same result: I can't Update the programs and get a "Serial Number is not for qualifying product" error.. Please help. Dave

update manually, http://www.adobe.com/downloads/updates/

Can't update BIOS?

Am I to understand that I simply cannot update my BIOS, on account of that I'm using WinXP with NTFS and don't know anyone with 98/ME? I really hope I'm missing something here, because that sucks. I shouldn't have to rely on "friends" with outdated operating systems in order to keep my BIOS up to date.
I also don't usually keep a floppy drive in my computer. I had to install one specifically to flash my BIOS. Can't this be automated by Windows yet? Sheesh. A little help here?

Do not flash your bios from a floppy diskette. it will fail. If you will
do a search of people who have done this they all have problems flashing from
a 3 1/2 disk. Flash from hard drive or cd rom as stated in flash procedures for
you mobo. Finally if there really is not a problem with your bios and hardware their is not good reason to update bios. If its not broke don't fix it!!!!!!!!
865PE Neo2-FIS2R Bios 1.3
P4 2.80C & Zalman CNPS7000A- ALCU
2 Crucial 256MB DDR PC3200 (1 Channel A & 1 Channel B)
ATI ALL-IN-WONDER® RADEON™ 7500 64MB
Maxtor 120 GIG DiamondMax Plus 8MB SATA
MSI CD-R/RW 52-M
MSI DVD DR4
Antec Sonata 380 PSU 2 120mm fans
Windows XP with current SP and updates
H T enabled
USR 56K internal modem
Logitech Cordless Access Duo\ keyboard & mouse
ViewSonic VX900 19" real cool

IPad 1 Can't Update (Unkown Error (1))

I've been trying to update my original iPad WiFi+3G. It will go through the process, installing the firmware, then verifying. I get the message that it can't update the device, with "unknown error (1)." It is presently stuck in restore mode.
Things I have tried:
Downloading the update directly from apple
Rebooting my MacBook
Repairing permissions on MacBook
Differnet USB ports
Differnt cablles
DFU Mode
I have an appointment with the Genius Bar Saturday morning (since they aren't taking any for tomorrow). Is there any other suggestions as to what I might try? What does this error mean?
Have I bricked my iPad? If so, how can that be resolved with Apple?

You can try this round about method. First, download the iOS 5.1 upgrade directly from the Apple servers;
http://appldnld.apple.com/iOS5/041-1536.20120307.XvCtw/iPad1,1_5.1_9B176_Restore .ipsw
Then, use these instructions to apply the upgrade to your iPad;
iOS upgrade direct download
After you have downloaded the update, attach your iPad to your computer, open iTunes and select your iPad in the devices list. Press & hold the Option key on a Mac or the Shift key on a Windows PC and click the Check for Update button. Browse to where you downloaded the update and Choose it. iTunes will handle the rest.

Qosmio G30 PQG31E - No XP 32 drivers? Can't update BIOS?

As usual, got a laptop but no recovery CD's :(
Got XP 32 installed (my Microsoft contract doesn't provide MCE) but lots of drivers missing. Toshiba driver page only has all drivers for XP MCE, XP 32 only has BIOS update, Bluetooth, HD-DVD firmwares, virtual sound and WI-FI drivers!
So I tought "Vista on it", but as I checked compatibility within XP with Vista DVD I got a "need to update BIOS" (still has 1.40 - 2006/03/10)!
My problem is that BIOS update always returns "This computer is not supported"! Laptop only has one account, so it's not permissions issue, maybe because lots of drivers are missing? Should I update BIOS in safe mode?
What now? Am I stuck with a Qosmio brick? Without LAN controllers to say the least I can't get nothing done! Will XP MCE drivers work on XP 32?
Any thoughts?

Friend of mine has Qosmio g30-189 (PQG31E) and WLAn card is Intel.
THIS must be the right driver.
Have you tried to install it in the past?

Satellite Pro L10: Can't update BIOS

Hello, I've tried (three times) to update my BIOS using the Windows version, however each time I try, it fails and sends a report to Microsoft - does anyone know what the problem is and how to fix it?

Hi
Firstly you have to know that if you use wrong BIOS or wrong BIOS update procedure you can damage the notebook (motherboard)
I have checked the Toshiba page and it seems that at this time the news BIOS release is from 25/04/06 - version 2.6
Please check this BIOS FAQ document:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS&FID=TRO0000000b07
There you will find how to update the BIOS.
According to this document you have to use the traditional BIOS update (BIOS Upgrade Procedure 2).

T431s - Can't update BIOS - WINUPTP.exe "Error code = 183"

Tried to update the BIOS on a new T431s. Downloaded the latest BIOS flash utility from Lenovo's support site, everything extracts fine, but once the flash utility starts and attempts to flash the BIOS it gets an error and re-attempts it (3 times), before giving me an error message: "Failed to Microcode update. The utility process has not completed.".
Looking at the log file shows an "Error code = 183" after each attempt.
The existing BIOS is ver. 1.04, and version I'm trying to update to is 1.06.
The ISO image for the BIOS update seems like a nogo since this machine doesn't have an optical disc drive. Unless there's some way to copy the [BOOT] partition on the iso to a USB drive.
Solved!
Go to Solution.

hi all
thanks for posting. Was reading through this thread and to be honest I'm not sure why you're receiving the error message when updating the BIOS. I will have to consult the team first to see if anything went wrong. In the mean time could you try updating the BIOS downloading the BIOS from the link below to see if you still face the same error message.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/ghuj02us.exe
Do post back your results.
regards

MS-6561 (745 ultra) - can't update BIOS

Hope someone can shed some light on this problem for me.
Am trying to resurrect a PC with a 745 ultra mainboard (Athlon XP 1800+ Tbred A) and 640MB PC2100 RAM (2 x 512 + 128)
Have stripped the system down to the bare bones....only DVD-RW, graphics card and PCI USB cards attached
Clean installed XP Pro with no issues and updated to SP3 and all other essential updates
Increased FSB from 100 to 133MHz in BIOS, as others have reported on here
Had a number of BSOD crashes with "Page Fault in Non-paged Area" as the stated error, so i tested the RAM using Memtest. Each individual stick passed at least 7 passes.
Decided that i should check the BIOS as i've had problems in the past that ultimately were solved by simply updating the BIOS
Try as i might, i cannot get a BIOS update to run using the USB key flashing tool kindly provided on this forum. The BIOS update file from the MSI site is an EXE file, rather than RAR or ZIP, so I extracted the new BIOS file (A6561SMS.170) and pointed the flashing tool at that. Each time i try i get the error message that the file is "Everythink But" a BIOS file
Interestingly, the forum flashing tool and PC Wizard both list the current BIOS as "AMI v 07.00T 04/02/01", whereas the POST screen has it as "A6561SMS V1.4 070502"
Any ideas?
Oh, the other thing i'm concerned about is the quality of the PSU. It looks like a pretty cheap one:
J-L-T 350W CB (PFC)
3.3V/20A 5V/30A (185Wmax) 12V/15A -5V/0.5A -12V/0.8A (9.6Wmax) +5VSB/2A
Comments on that would be appreciated too
Thanks in advance
MarkW.

Quote
Decided that i should check the BIOS as i've had problems in the past that ultimately were solved by simply updating the BIOS
Try as i might, i cannot get a BIOS update to run using the USB key flashing tool kindly provided on this forum. The BIOS update file from the MSI site is an EXE file, rather than RAR or ZIP, so I extracted the new BIOS file (A6561SMS.170) and pointed the flashing tool at that. Each time i try i get the error message that the file is "Everythink But" a BIOS file
That's correct mode 1 can works with .rar or .zip only.
Quote
I was hoping that someone might be able to comment on the fact that the currently installed BIOS appears to be different depending on where you look at it - either AMI 07.00T or A6561SMS v1.4. Is this not unusual?
Quote
Interestingly, the forum flashing tool and PC Wizard both list the current BIOS as "AMI v 07.00T 04/02/01", whereas the POST screen has it as "A6561SMS V1.4 070502"
Any ideas?
That's suppose to be, ignore it. CPU-Z will tell you the same.
SMBIOS info is different than post screen information typical for ancient mainboards.
Quote
I was actually selecting Option 2 with the flashing tool, Stu. The problem is that the tool tells me that the file that i extracted (A6561SMS.170) from the BIOS archive (EXE) file on the MSI Support site
http://eu.msi.com/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=274
is not a valid BIOS file. The same happens if I try other older BIOS updates. Is there a known issue using the tool for older boards & BIOS?
Quote
The problem is that the tool tells me that the file that i extracted (A6561SMS.170) from the BIOS archive (EXE) file on the MSI Support site
That's correct Mode 1 expect BIOS archive file[.zip or .rar] and not BIOS file itself, Tool's verification failed and Tool advice to use Mode 2 instead.
Quote
i extracted (A6561SMS.170) from the BIOS archive (EXE) file on the MSI Support site
http://eu.msi.com/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=274
is not a valid BIOS file. The same happens if I try other older BIOS updates. Is there a known issue using the tool for older boards & BIOS?
Mode 2 Tools verification failed because the BIOS file doesn't match with co-respond flasher and Tool rejected it.
Your ancient board is not supported by Mode 2, because else it will apply the wrong flasher,
to prevent that Tool make verification checking to make sure pointed BIOS file will meet the necessary criteria
I've attached the latest BIOS for your board to meet the Tool's criteria, use Mode 1.
Note: DO NOT FLASH your BIOS if BIOS update is not really need.
DO NOT FLASH if you have stability problems!! That will end with dead board, if something your PC hang/lockup/reboot during BIOS flashing process and you will end with dead mainboard.
Read this topic 1st!! ==> https://forum-en.msi.com/index.php?topic=103441.0

NB200 - Can't update BIOS, error 1072

Similar Messages

Maybe you are looking for