NB200 - How to enable WiFi on Windows 7?

Hey,
I've just bought a brand new Toshiba NB200 netbook (10-Z).
When finished with the needed Win XP install, I installed the Windows 7 RC1, but the wifi is not working. The Fn+F8 Combination would start the wifi adapter, but the led in the outer side of the netbook is not blinking or anything, and system says, first I have to turn on the wifi, but I simply Can't, because the combination isn't working. I installed all the drivers, but still don't work.
Sorry for the bad english, i'm Hungarian.
Thanks, B3N1

I installed seven directly, without even booting on the windows xp config shipped with the laptop
the wireless was off, there was no way to enable it, even after following all the advises before.
I had to reinstall XP on a second partition from the restore disc, and then the wireless was enabled, either on windows xp or seven... (but you could do the same thing from a standard xp install, you'll just have to install all the drivers)
Altough I cannot switch the wireless off with the fn+f8 combo (or i can go to the xp partition, switch it off, and go back to seven... lol)
I know seven was not officially supported and blah blah blah but it was really REALLY annoying, it was the first (and I hope the last) disappointment with the nb200. (PLL20C-00200C, canadian model)

Similar Messages

  • How to enable wifi

    how to enable wifi in my HP 15-ac044TU Notebook i am using windows 7 64 bit i press f12 but this is not eable to enable the wifi please let me know the process to enable the wifi

    Hit the F7 key (the one with a white aircraft on it...). This is a kind of turn on/off button for the wireless inteface.

  • How to enable WiFi transfer from Canon Legria HF M52 to iMac

    My iMac is a late 2012 model with Mountain Lion (v. 10.8.3).
    Recently I bought a Canon Legria HF M52 camcorder which is WiFi enabled, and is capable of transferring videos (AVCHD/MP4) wireless. The camera package included software for WiFi transfer on Windows PC, but not for Mac. However, still, according to the instruction manual, it should be possible to transfer files wireless to Mac using the Mac as a FTP server. Though, following the instruction manual, I`m still not being able to transfer files from my camera to my Mac.
    1. I know for a fact that the camera is correctly connected to the WiFi network, as I`ve managed to transfer files onto a friend´s Windows PC.
    2. Video files are easily transferred to Mac using the USB cable (but the CABLE is what I want to avoid), both AVCHD/MP4.
    3. Since Mountain Lion no longer has the option to enable/activate FTP server under "System Preferences/Sharing", I have enabled FTP via "Terminal" as described in this link; http://support.apple.com/kb/ht4704.
    4. Camera setup:
         - Use iMac IP address as "FTP server", 192.xxx.x.x (dynamic IP, so it is changed in camera setup if IP address is changed upon iMac reboot).
         - Port 21 (as dictated by the camera`s instruction manual).
         - Username / password as for the iMac admin account.
         - Destination folder; /User/Movies
    5. I have verified connectivity from MBA to iMac connecting via IP address / username and password.
    Still, when I try to transfer files from the camera, I get an error message while attempting to connect to the iMac; "An error occured during FTP communication. File transfer was not completed". Have made several attempts to reboot both iMac and camera.
    Any tips on how to enable my iMac to receive video files wireless?

    I guess those programs are intented for outgoing connections, not incoming connections?
    Well, anyways, I managed to solve the problem. Just summing up in case others meet the same problem:
    - Went to Apple Store and bought/installed "OS X Server".
    - Followed the install wizard for the OS X Server.
    - Under "FTP" in OS X Server, turned "On".
    - Under sys prefs/sharing; make sure "Sharing" is activated (which already had been done in my case).
    - Add folder, e.g. "Movies", and enable "read/write" for "everybody" (already done in my case).
    - Back to the OS X Server; changed share to "Movies".
    (you can change share options in OS X Server as well, the same way as under sys prefs.).
    - Now over to the Canon camcorder;
         - Use the IP address for the Mac as the FTP server. Port 21.
         - Set up username/password as for the Mac admin account (not sure if required though).
         - Target folder just set to "/" (files transferred directly to "Movies").
    With this setup, both AVCHD/MP4 movies were transferred easily to my mac.

  • How to enable hibernation in Windows Server 2008 R2

    Hi 
    I am using Windows Server 2008 R2. I want to enable hibernation on server 2008 R2. I have checked the feature in power options but it dose not show any option for sleep & hibernation. I have tried to enable from command prompt by using powercfg -h on
    but getting error message that this feature is not supported by firmware. I have updated the firmware but still getting same error.
    Also checked with powercfg /energy & getting given below errors.
    Platform Power Management Capabilities:System firmware (BIOS) does not support S3.
    The hardware in this computer does not support the S3 sleep state.
    Platform Power Management Capabilities:System firmware (BIOS) does not support S4 (Hibernate).
    The hardware in this computer does not support the S4 (Hibernate) state.
    Platform Power Management Capabilities:PCI Express Active-State Power Management (ASPM) Disabled
    PCI Express Active-State Power Management (ASPM) has been disabled due to a known incompatibility
    with the hardware in this computer.
    Can anyone suggest me how can I enable hibernation on windows server 2008 R2 64 bit.
    Thanks.

    Hello,
    I hate to suggest the obvious, but i'd say your hardware does not support sleep or hibernate.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • How to Enable sleep/standby (windows 7) T61

    How to enable sleep/standby mode on a windows 7 32bit lenovo t61 -  7665?
    Background info:
    I just formatted my Lenovo t61 - 7665 because I had alot of problems with hibernation and sleep mode.Now I really don't want to update if I dont have to but I need to update something to make sleep mode work?
    Does anyoe know what driver or software to install to make sleep standby mode work. Hibernation works great
    Thanks

    Just look into that thread
    It might help you.
    My home-forum: http://www.thinkpad-forum.de
    Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
    My ThinkPad-Collection

  • How to enable wifi in G50-70 on Ubuntu 14.04

    Hi,
    I dont see any key to enable wifi in my laptop.
    Please help me to enable it.
    I am using Ubuntu 14.04.2 LTS - 64 bit.
    # lspci -vvnn | grep -A 9 Network
    02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter [10ec:b723]
        Subsystem: Lenovo Device [17aa:b736]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 10
        Region 0: I/O ports at 3000 [size=256]
        Region 2: Memory at c0400000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [40] Power Management version 3
            Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    Can anyone have idea how to enable it and it will work smootly.

    Hit the F7 key (the one with a white aircraft on it...). This is a kind of turn on/off button for the wireless inteface.

  • Satellite A660-11M - How to enable WiFi?

    Hi. I have a Satellite A660-11M with key features
    -Genuine Windows 7 Home Premium 64-bit (pre-installed, Toshiba-HDD recovery)
    -Intel Core i7-720QM Processor
    Wifi:
    Compliancy : Wi-Fi
    Network Support : 802.11b/g/n
    Manufacturer : Broadcom
    Wireless Technology : Wireless LAN
    Manufacturer : Broadcom
    Wireless Technology : Bluetooth 2.1 + EDR
    It has been working fine but after the children were using the machine and shut it down I cannot see the Router using the wifi.
    I tried the hardware switch on the media strip between the keyboard and the screen and none of the buttons respond; I suspect this may be the issue.
    Fn F8 brings up the wifi fn display but clicking on it will not enable it. Trouble shooting informs me to "Turn on Wireless Capability" but as stated above, the media strip appears to be inactive. I can connect normally using the cable to the router.
    I tried a System Restore but that didn't help.
    So although I have a sinking feeling I am missing something obvious, any thoughts before I start reloading wifi driver and resetting BIOS? If that is the recommended approach, what driver controls the media strip
    Many thanks for any help.

    Thanks for all your assistance... Got it sorted:
    For anyone else with this model, *it was a hardware fault.*
    You need to undo one of the screws on the underside of the laptop (I undid them all 8o() and gently lift up the keyboard fascia from the top (directly above the function buttons). Under here you will find a small ribbon cable from the media panel to the motherboard... this had come undone.
    Reconnected, rebooted, job's a good'un.
    Genuinely impressed with how supportive this forum is... in Arnie's immortal words: I'll be back!
    SD

  • How To Enable AHCI For Windows 7?

    I'm trying to get my Samsung 840 Evo SSD to enable AHCI, but have been reading and it appears to be more difficult than a few simple changes. I have an Early 2011 15" Macbook Pro. How do I get AHCI enabled for Windows 7?
    Thank you in advance.

    Thank you for the link. I'm still not sure what needs to be done. I made the changes in 'regedit' like the forum stated, but am still having issues. I will post screenshots below that are showing up. More assistance would be greatly appreciated.

  • How to enable hibernate in windows 7 x86

    Hi
    hibernate feature is not enabled on my system.
    "hibernat after" and "Allow Hybrid Sleep" does not exist in the below directory:
    Power Options>Sleep
    I when typed "powercfg /hibernate on" OR "powercfg -h on" in administrator CMD, Show below message:
    Hibernation failed with the following error: The request is not supported.
    The following items are preventing hibernation on this system.
    An internal system component has disabled hibernation.
    I when typed "Shutdown /h" OR "Shutdown -h" in administrator CMD, Show below message:
    Hibernation is not enabled on this system. You must enable hibernation in order
    to use the -h option.
    hiberfil.sys file does not exist in root windows drive.
    Please Help me
    Thanks

    Hi,
    you cannot use hibernation if booting from VHD also you will need hardware that support the required standards (modern hardware does) and have up-to-date drivers
    you could force hibernation to on by setting key HKEY_LOCAL_MACHINE\SYSTEM\CurrentCongtrolSet\Control\Power\HibernateEnabled to 1
    MCP/MCSA/MCTS/MCITP

  • How to enable javascript in windows server 2008 R2 enterprise ?

    Hi all,
    Hope doing well,
    sir i am using windows server 2008 R2 enterprise operating system.
    i am running my web application in localhost. it's working fine.
    but i have used timer using javascript and some javascript function that is not working in this application.
    i googled many thing and i got one solution that is http://njbblog.blogspot.in/2010/02/issue-windows-server-2008-javascript.html
    i went through this link and i have done the solution but in my another system has the same configuration and same thing i am doing there but it's not
    enabled javascript and my application is not working.
    plz help me. it's urgent
    waiting for reply.
    thanks in advance.
    vicky Bangalore

    Hi Vicky,
    Please make sure that the Javascript is enabled on you IE.
    To do this, please go to Control Panel->Internet
    Options, click on security tab,
    click on customer level button. Please scroll
    down to Scripting, underScripting
    of Java applets, click enable.
    OR
    Please try to start the Internet Explorer with option "Run as Administrator" to see whether it works.
    Regards,
    Rafic
    If you found this post helpful, please give it a "Helpful" vote.
    If it answered your question, remember to mark it as an "Answer".
    This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

  • How to enable flash in windows 8

    Adobe website says Firefox is installed. Works under Internet Explorer. But Firefox Options Plugins does not show either Flash or Shock. Trying an install bombs out with an error that it can't find entry point in a Windows system file. How do I get Firefox to see that Flash is already in Windows 8?

    Adobe has different installers for IE and Firefox, because IE takes an ActiveX control and Firefox takes a plugin. You might need the second installer if you have never run it before.
    http://get.adobe.com/flashplayer/
    Visit using Firefox and make sure to uncheck any unwanted extras.
    After the installer downloads, you will need to run it. If that's where the problem is, you can try the "offline" installer that doesn't need to connect back to Adobe for more files and see whether that works better:
    https://www.adobe.com/products/flashplayer/distribution3.html
    Choose one of the downloads for "Plugin-based browsers".
    Any luck?

  • How To Enable NAT in Windows 2003 Server to wireless connection mobile or computer

    Situation: I am an administrator of company . I’m getting my internet services through a
    DSL connection. I’m using Microsoft technologies; hence, my server is Windows 2003 Server. I want to distribute internet(wireless) to all the computers or mobiles through the main server by routing and remote access
    Main server is 192.168.1.10
    Default gateway(ip of router linksys) is 192.168.1.1
    How can i do that and which setting i will use
    please help me

    Hi,
    So you don’t have a NAT device and want to use windows server 2003 RAS role as a NAT?
    Windows server 2003 could work as NAT.
    How to configure Network Address Translation in Windows Server 2003
    http://support.microsoft.com/kb/816581
    But I’m a bit curious with your gateway. I guess windows server 2003 connect to internet via your default gateway. If so ICS is another solution:
    How To Set Up Internet Connection Sharing in Windows Server 2003
    http://support.microsoft.com/kb/324286
    At last, buy a wireless router could be a better solution.
    Hope this helps.

  • Dell Vostro 1400 - How to enable wifi?

    I ran this (my wifi chipset is Broadcom, anyway) :
    ifconfig wlan0 up
    And the output was:
    SIOCSIFFLAGS: No such file or directory
    So I followed the guide on this page, and stuck at this part:
    FATAL: Module wl not found
    Any idea?

    Did you download the broadcom driver module from http://aur.archlinux.org/packages.php?ID=19514 ?
    Perhaps this could help with that process: https://wiki.archlinux.org/index.php/AUR
    Last edited by 3]) (2010-11-25 22:32:01)

  • How can I install new windows on NB200-10z without a CD drive?

    Hi,
    I have a mini laptop "Toshiba nb200-10z" and it doesnt startup anymore.
    I would like to do a recovery, but it also doesnt work.
    I know there is a shortcut like press the 0 button when the laptop is starting up.
    With this shortcut you can start the recovery to reset the software.
    But when I press the 0 button it gives me an error.
    So I think the recovery drive/partition is lost.
    How can I install new windows on this minilaptop without a CD drive?

    I have found a much easier way to install Windows 7 from a USB Flash drive. Unlike other methods where you have to write complicated commands, this method can be completed even by those who have very little computer background.
    The whole process takes only two steps, run UNetbootin, load the Windows 7 ISO file, and finally restart your computer.
    Before you begin, you will require the following:
    USB Flash Drive (4GB minimum)
    Windows 7 ISO Image file
    UNetbootin
    Note: If UNetbootin doesnt work, try out the Microsofts official tool called Windows 7 USB/DVD Tool.
    Now insert the USB drive, run UNetbootin, and select Disk Image as ISO. Browse your local drive for Windows 7 ISO that you downloaded and click Open. Now Select Type as USB and choose the drive. Once done, it will look like a bit similar to the screenshot shown below.
    Click OK and it will begin extracting all installation files to the USB drive. The whole process will take some time (10-15 minutes), so have patience.
    Once the installation is complete, reboot your computer. Now while your system is starting up press the appropriate button (usually F1, F2, F12, ESC, Backspace, or Escape) to bring up Bios Boot Menu.
    Change the startup order to boot USB by default, usually you will have to press F6 to move the selected USB device on top. Once done, save changes and restart the system.
    +Message was edited: link has been removed+

  • How to - enable - multi touch - in windows 7 ultimate - for my G560 touchpad

         I and my friend have the lenovo G560 laptops. I am running windows 7 ultimate and my friend is running ubuntu 11.04 OS in our laptops.
    In Ubuntu: The multi touch is enabled by default for the laptop touch-pad. For vertical scrolling, we can use two fingers to navigate.
    In Windows 7 Ultimate: I don't know how to enable this multi-touch feature.
    Your help is very much appreciated.
    Thanks in advance.

    control panel > hardware and sound > mouse > mouse properties > device settings > settings ( if you have synaptic mouse )
    if you don't synaptic, check the mouse properties to enable/disable the features you'd like to.

Maybe you are looking for