NB200 (PLL20E) - How to turn on wireless LAN?

Hi all,
Just received a NB200 PLL20E and the F8 Hotkey does not turn on the wireless LAN. I have tried updating the BIOS (was up to date) and the Atheros driver...still no luck.
Any thoughts?

Wlan antenna must be enabled in order to be able to establish the WLan connection!!!!
Read what previous users said: wireless communication can be enabled with the key combination FN+F8 and in BIOS.
Pressing the FN+F8 would enable following conditions:
Enable BT only
Enable WLan only
Enable 3G only (some models)
Enable all devices
Disable all devices
If Fn+F8 doesnt work then you should check the software which controls the FN buttons. The Toshiba Value Added Package includes the software which is needed to get the HotKeys (FnF8) to work.

Similar Messages

How to Turn off wireless synchronization in Curve 9360

Hello
I have a Blackberry 9360 and I do not know how to turn off the wireless sync. I tried to follow the instruction given in the desktop manager help but it didnt match with my device. Your help is much appreciated.
Sadiq

Sorry, my bad. the wireless syncronization settings for Contacts, Calendars, Tasks and Memos can be found in Organizer on the left panel of the Blackberry Desktop Software.
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

How to find the Wireless LAN adaptor on my Satellite L350-21U

Today I received a message through Toshiba Tempro that an update for the LAN driver is available for my laptop which has Windows7.
However there are some possibilities i.e. INTEL, ATHEROS or REALTEK.
How can I find which LAN driver is installed on my laptop.
Please note that I am not so familiar with computers.
A step by step instruction would be appreciated !

Your notebook have Intel WLAN card but if the WLAN works well don't change anything.

How to turn on both LAN and Wireless T430

I need both my LAN and wireless enabled at the same time. Can I turn them both on using Think Advantage? I believe our IT dept has uninstalled any ThinkAdvantage software. Which ThinkAdvantage software should I download and where do I turn both the wireless and the LAN on at? Thank you

Windows doesn't make it easy for you to have different processes access different networks simultaneously.
You can force it to prioritize one over another as so:https://answers.microsoft.com/en-us/windows/forum/windows_7-networking/wired-and-wireless-connection...
But it's all or nothing; you use either-or.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

How to turn off wireless when docked ?

We have lenovo thinkpads (T410,410, 420, x200,210,200,X1). How can I turn off the wiress nic when the laptops are docked ?

Set up an Access Connections profile with both WiFi and LAN devices in it and select "Best Available Network" mode.
Cheers,
Bill B.
I don't work for Lenovo

Satellite A660 wireless can't work: how to turn on wireless switch?

The new laptop's wireless just stopped working. When I press Fn+f8 it tells me: Wireless Communication is Disabled. Please Turn on The Wireless Communication Switch.
I tried to disable and enable wireless, update network adapter's driver(Broadcom 802.11n and Realtec PCie FE family controller), and load default setup in Bios but nothing worked. The wireless button on top panel is on, and when I press the button, a window called thoshiba button support pop up and says: the button you pressed has not been configured. But this happens to other laptops too (we have 8 same type laptops), only this one can't use wirless. What can I do now?
Message was edited by: Jenny_1

Hi
Please reinstall the Wlana driver and try again. (Don't update but uninstall the old driver, reboot the unit and install the new driver)
In most cases such Wlan troubles appears if the Wlan driver does not work correctly.
Since all other notebooks are ok, I think that this is a temporal issue in registry or something like that
PS: It can be possible that the FN buttons don't work corectly. THerefore you can reinstall the VAP (value added package) and Flash Card support Utility as well in order to reconfigure the FN buttons.
Greets

How to improve the wireless LAN coverage?

Hi all,
We are using Cisco 1200 access point in our small retail shops and use some wireless heldheld devices to connect the wireless network. Since the shops are inside the shopping plaza, there are many other wireless access point which interference our wireless clients. The access point were installed in the middle of the shop, sometimes, our client walked to the shop entrance (< 10m from the access point), the wireless network was disconnected and it may try to connect the other unknown access point. I tried to change the frequent but it doen't help. We are using a pair of 2.2dBi Dipole Anntenna wit the AP and mount in on the wall (~ 1m above the ground). Is there any suggestions to improve the coverage? Is there any improvement if I use a more powerful anntenna (e.g. 6.5 dBi Wall Mount anntenna)?
Thanks,
Dovelet

Dovelet,
I was going to suggest upgrading your AP to 802.11a but you are probably using Symbol handhelds and they don't support 802.11a yet (for that matter I don't think there is a handheld that supports 802.11a yet).
Use a computer and scan the airwaves to see what APs are out there and what frequency they are on. Configure your AP to a different channel either 1,6 or 11 (that no one else is on).
Put two 6 dBi Patch Wall Mount Antennnas 3 to 4 feet apart on one wall, part # AIR-ANT2460P-R. If you have a long narrow store the patch antennas will be your best bet, They have a narrow beam and you will get less multipath distortion from the radio waves bouncing off your walls. You can also get an Antenna mount kit, part # AIR-ACC2662 to help better aim your patch antennas.
If you have a square or circular store place two omnidirectional antennas in the center of the store, use a high grade low loss cable like part # AIR-CAB100ULL-R. Or for that matter put your current AP high in the center of the store. Run Cat5e cable to it and use a Power Injector to provide power to your AP over the cat5e. You can also add the high gain omnidirctional antennas (2 of them) to this configuration without needing the low loss cable.
These are powerful antennas and you don't want your signal going into the store across the way from you. So take a laptop or your hand held walk across the way to the front of the store and see what kind of signal you get. Reduce the power setting of your AP so the signal doesn't bleed into the store across the way from you and if you use omnidirectional antennas into stores on either side of you.
Make sure you mount the antennas high 8 to 10 feet. I assume you have your Encryption set,SSID broadcast disabled and your handhelds configured to only connect to your APs SSID.
Hope this helps.
Robert

How To use a wireless in Satellite L305-S5968

I just recently purchased a Toshiba Satellite L305-S5968 and I've never used or been able to set up a wireless PC.
How exactly can I use this PC to be wireless so I can login for free at the local library.
My wireless network card is this one: Realtek RTL8187B Wireless 802.11g 54Mbps USB 2.0 Network Adapter.
I have the LAN working just fine but I'm afraid that the library does not have LAN plugins there.
What all do I need and what do I need to do to make this work.
I need step by step instructions on this please do not post vague answers.
I'm not a PC idiot, but I have never set this up before so this is new for me.
EDIT: Sorry I realize this may help...
I'm running Windows XP SP2 on here I believe.
I have my own disk i installed it with. I'll also be installing the wireless driver becasue apparently its missing as well.
Thanks

Hi,
Im a little bit confused about your posting. What you want to know exactly?
I mean you can WLAN instead of LAN without problems. Its the same just without cable. You have only to check the TCP/IP settings on your computer that is also depending on the router and type in the right password from the router Thats all!
Furthermore I have founded an interesting document:
[How to use a Wireless LAN Access Area for easy connection with Toshiba ConfigFree?|http://aps2.toshiba-tro.de/kb0/HTD9202JI0000R01.htm]

Turning off Wireless on N8

I got my N8 3days ago. For now I'm very pleased with it and it works really nice and smooth.
Now, my problem is that I don't know how to turn off wireless network, and I mean turn it off completely. I tried everything that crossed my mind by I just can't turn it of. I go to Connections and turn it of, but it starts by itself automatically few seconds later (and I am talking about my home wireless network as well as wireless network in my office). Problem with this is that it drains battery during the time when I actually don't need to use internet at all.
So is there any way that wireless network can be stopped and then resumed when needed ?
I would be really grateful if anyone can help me with that issue.
If I've helped you in any way, a click on the White Star to the left would always be appreciated.
Solved!
Go to Solution.

Symbian_fan wrote:
Ok this is the issue. It is a bug in mail app. Mail apps just over rides the settings in your connections settings. The solution is Go to mail - settings - Your account - Synchronization - set fetch frequency for everyday. Then re start your phone. Some times your phone still connects to WiFi but this time when you turn it off in connections it will turn off forever. You may need to do it again and again some times because as i said it is a bug in mail app. ( I assume that the widgets are set to offline mode, and ovi sync settings is auto sync off they may also cause the connection)
It is simply a bug, if i turn off my WiFi in connections that should override all the individual app settings and gain the priority, but there are some apps like mail which gains the priority over the system settings. Hope it will be solved in the next firmware.
I have the same settings from the beggining and the wireless keeps connecting with a specific wireless access point, i have ten access points in my list and this happens only when im in the range of this access point.
My settings are
Mail App Synch: All Days unchecked, 20:00-20:05, None
Widgets in offline mode
No apps set in online mode
WLAN scanning turned off
The problem occured suddelny after adding that access point which is a common Thomson TG585v7 and it's hapening only with that acess point, it's very annoying because i have to change the security settings (like wpa key) to make it go in offline mode. I read in forums that others have also the same problem and the only solution is to move the AP, delete ot change settings.

Turning off wireless adapter

How do I turn the wireless adapter on and off on my Envy H8-1414? It would seem like that should be in a product user maunal but no such manual came with the computer.
Thank you.

Hi:
Below is the link to the support page for your PC.
http://h10025.www1.hp.com/ewfrf/wc/product?product=5296859&lc=en&cc=us&dlc=en&task=&lang=en&cc=us
There is a manuals link on the right side of the page.
I didn't read through all of the manuals, but I didn't see any info on how to turn the wireless adapter on or off.
Normally there is a tiny button on the front of the case which turns the wireless on or off.

Integrate wire & wireless LAN

how to Integrate wire & wireless LAN in cisco 1812 router

Hi Jayesh,
have a good start here:
http://www.cisco.com/en/US/products/ps5853/products_configuration_guide_chapter09186a0080458278.html
Best reagrds,
Frank

How to replace the certificate of Cisco 2106 wireless LAN controller for CAPWAP ?

I have interested in CAPWAP feature and I download the open capwap project to make Access Controller (AC) and Wireless Terminal Point (WTP). I had built the AC which used PC and WTP which used Atheros AP. The CAPWAP feature work well when I enabled the CAPWAP that used my own AC and WTP. When I got the Cisco 2106 wireless LAN controller (Cisco WLC), I configured the Cisco WLC to instead my own AC but I got the authorize fail in Cisco WLC side. It seem the Cisco WLC could not recognize the CAPWAP message which sent form my own WTP. I think this issue just need to synchronize the certificate between Cisco WLC and WTP.So I need to replace the Cisco WLC's certificate manually. Does anyone know how to replace the certificate manually with Cisco WLC ?
Best Regards,
Alan

Unfortunately this Support Community is for Cisco Small Business & Small Business Pro product offerings. The WLC2106 is a traditional Cisco product. You can find this type of support on the Cisco NetPro Forum for all traditional Cisco products.
Best Regards,
Glenn

To sync WIRED, need to turn off WIRELESS feature on BB. HOW?

The Desktop Mgr says to turn off the WIRELESS feature on my Curve 8310 in order to sync with my home laptop. On the BB, where is this nonwireless/wireless feature? I'm trying to sync thru the USB port with a cable. Previously this Curve was synched wirelessly to an employer's computer at a job I no longer have.
Solved!
Go to Solution.

Well you can do one of 2 things:
Go into the database (Calendar, Address Book, etc), hit the menu button, choose Options. From there you can turn the Wireless Synchronization Off. You can leave the settings to Off for each database that you want to synchronize with.
You can follow these steps to remove the IT policy from your phone. This will remove any polices that may still be in effect on your device when it was connected to your company's BES. Doing so will take those wireless synchronization lines off of your phone. http://www.blackberryfaq.com/index.php/Remove_IT_Policy
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

How to fix '2x2 11b/g/n Wireless LAN M.2 Adapter disabled'

T440, Win 7,
cannot connect to internet and in device manager th message says:
2x2 11b/g/n Wireless LAN M.2 Adapter disabled, and wonder anyone can help.
it happend several times since I bought it 3 month ago.
thanks!

i did each time (total more than 20 times), but did not work.
the thing is that, i can see local connection icon, but not wireless icon. so i guess the problem is here, and wonder if you can teach me to generate one.

How do I turn OFF wireless for HP d110 printer

I'd rather it just go through my USB since my wireless is shaky at best.
There does not appear to be an 'OFF' option when you use the printer's menu for wireless.
Please help!
Thanks,

Also, you could turn the wireless off using the Network menu on the front panel of the printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

NB200 (PLL20E) - How to turn on wireless LAN?

Similar Messages

Maybe you are looking for