NB305-02P Attempt to create recovery media damaged format of USB drive?

Twice now, I've tried to created a recovery record using 16 Gb USB drives. Different makes of drive, one I have been using previously on an XP computer, works fine there. In both cases, the attempt to create the recovery record resulted in a USB drive that was unusable. The Creator program calls for the re-format of the USB drive, that fails, and then the drive is indicated in Windows as having zero capacity, plus it cannot be re-formatted by any method I've tried so far.
What I'd like most, of course, is a way to repair the failed drives. Failing that is there a specific method I can use, with a new drive, to avoid this problem?
Thanks for any help!
Larry Van Wormer

Hi egrivel,
As stated above, there is no option to create optical recovery media. You can use a flash drive. 8G 16G I believe, but verify that when running the utility. Make sure "copy the recovery partition" is checked.
Methodology to create Recovery Media and reload a Lenovo system with Microsoft Windows 8 preload
Z.
[edit] 16G flash drive size.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Create Recovery Media Windows 8 without USB drive

Hi,
I recently bought a T530 with Windows 8 pre-installed. I want to create recovery disc(s). However, in the "Create a recovery media" wizard, I don't have the option of selecting DVDs if tick the option "Copy the recovery partition to the media". I have a bunch of DVDs lying around and I would like to use them. Not to mention that I don't intend to buy USB drive just for this purpose.
Any help is appreciated.
Thank you,
Solved!
Go to Solution.

Hi egrivel,
As stated above, there is no option to create optical recovery media. You can use a flash drive. 8G 16G I believe, but verify that when running the utility. Make sure "copy the recovery partition" is checked.
Methodology to create Recovery Media and reload a Lenovo system with Microsoft Windows 8 preload
Z.
[edit] 16G flash drive size.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Attempting to create recovery media on P500-ST6822 but fails

Just received my Satelite P500-ST6822 laptop with Windows 7 OS, and want to create recovery media before I start normal use.
While creating the system recovery media the process fails at the same location indicating -
"Diferences were found between the following files.
Source Path:
Z:\ZZImages\ZZImages\PREINSTS.SWM
Targe Path:
D:\ZZImages\ZZImages\PREINSTS.SWM
(Error Code 02016F-3C-00000000)"
Tried this twice, and both attempts fail at same location. Next message indicates failed to create recovery CD 1, and gives three choices, retry, next , and cancel. Have wasted two DVDs, would like to get past this so I can a complete set of recovery media. Any ideas on how to get around this failure?
Thanks in advance...
Solved!
Go to Solution.

You'll need to contact Toshiba Support about this and have them send you a working set of recovery disks as the files on your hard drive are corrupted. There's nothing you can do to change that on your end.
See this post on who to contact to order the disks and be sure to explain the problem you are having so they don't charge you for them.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Creating Recovery Media with Portable External Hard Drive

Is it possible to create recovery data with a portable external hard drive?

Hi,
i am also facing the same problem not able to create the recovery media in external hard disk. win 7 64 bit..
Please help there is an option to create recovery media in USB flash drive but its not recognising the usb even though its connected.
Mahesh

Satellite T230D fails to create recovery media

I have a Satellite T230D running Windows 7 Home Premium. When attempting to create recovery media using a USB drive, the process starts by advising that the USB drive will be formatted.
At this point it fails with the error code 040EAE-57-00000000. The USB drive is left in an unusable state and cannot be reformatted by Windows.
The HP USB Format utility does manage to reformat the USB drive.
Before starting to create the recovery media application I disabled virus control, the firewall and Internet access to ensure that nothing got in the way. I have tried this twice with the same result both times.

Hey mate,
Very interesting. I have the same model and I also created the USB recovery medium but at the end it was no problem for me. I also got an error message during creating the medium so I tried another USB stick. Before that I formatted the USB stick with default settings. So I started creating the recovery medium and this was done successfully with the second (other) USB stick so no problems at all.
I have used 8GB USB stick from CN Memory, model Spaceloop XL. What USB stick you are using?
By the way: I would recommend verifying the medium after creating (just mark this option in recovery media creator). That means the files on USB stick will be checked if they were copied properly or not. This could be important if your notebook doesnt start anymore.

Cannot Create Recovery Media - USB

Hi, I have a Toshiba P875, Windows 8. Tried creating recovery media on a brand new Transcend 16GB USB 3.0 flash drive. I get the error code 'Format failed! (Error Code: 040E87-0A-000000000) What could be the issue? Couldn't find any answer on the forum. Disabled Anti-virus but still did not help. Any help will be appreciated. Thanks, Anand
Solved!
Go to Solution.

Here’s how I got my Toshiba to create recovery media on a USB drive that gave the following message:
'Format failed!
It appears that Recovery Media Creator recognizes some USB drives as having two partitions even though one only shows up under windows. I tried 2 different USB drives the first was a Team Group 16G USB 3.0 thumb drive and the second was a Kingston Datatraveler 16g 3.0 USB thumb drive. Recover Media Creator work flawlessly with the Kingston drive and gave me the error with the Team Group drive. I tried formatting the drive with windows which didn’t help. I downloaded HP USB Disk Storage Format Tool located on the cnet website and formatted the Team Group drive (run as administrator). After that it also worked flawlessly. So my advice to anyone who gets the “Format failed” message with Recovery Media Creator is either try using a different thumb drive or download HP’s format tool and let it format the USB drive.
http://download.cnet.com/HP-USB-Disk-Storage-Format-Tool/3000-2094_4-10974082.html

Re: Unable to create recovery media flash drives

I recently purchased a new Toshiba netboo NB305-N440BL and upgraded to Windows 7 Home Premium. Using the "Create Recovery Media" wizard, as suggested, I attempted to create the recovery media on two flash drives. The flash drives were brand new and had never been formatted.
When inserted the "wizard" program stated that the Flash drives needed to be formatted, but when I asked that they be formatted, the program said that there was an error and they could not be formatted. I then formatted the drives using Windows Explorer Disk Management, reinserted the drives and received the same "...needs to be formatted, but wouldn't format ..."message. I also received "error code 040E2D-00-00000000".
I Googled this error message and found two others who had the same problem with their Toshiba net books when they attempted to create the back up material. There were no responses to their requests for help.Is there another approach to making the back ups?
Thank you

I finally gave up and returned the computer to tech service at Fry's where I bought it.They found that the OS did not recognize the flash drives at any of the USB ports, so they exchanged the computer for a new one ( I was still within the 15 days after purchase for a return) and the new computer works perfectly, Thanks for all the suggestions.

Cannot Create Recovery Media in Windows 7 Pro for x120e

You can have only one copy of the Microsoft Windows operation system. The Product Recovery Media Creator will exit now.
HI all. First, I have read "Creating Recovery Media in Windows 7" at http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-74040.
I get this message when attempting:
You can have only one copy of the Microsoft Windows operation system. The Product Recovery Media Creator will exit now.
What happened is that I blindly copied the recovery files to a USB and just copied to a folder on my desktop XP machine. So now my X120e is saying, sorry, you can't do that again. You already did it blockhead!
So how the heck do I undo this so I can create appropriate recovery media? System restore rollback? Registry key editing? Here are the files on my XP, I have no idea if I create Windows 7 pro recovery files from these.
Thanks all for any suggestions or known fixes,
chadnc
Root folder files & folders:
winRE.wim
usb.tag
Folder\factoryrecovery
Folder\Boot
Inside of Folder\factoryrecovery
sdrivebackup2.wim
cdrivebackup.swm
cdrivebackup2.swm
cdrivebackup3.swm
cdrivebackup4.swm
bcdinfo
RECOVERY
service_done
Inside of Folder\Boot
24 subfolders, starting with cs-CZ
BCD
boot.sdi
memtest
tag

Hi chadnc
Have a look at the first bit of the post by The_Solutor in this thread :Making a usb stick with the Lenovo recovery partition bootable maybe that will help.
Like many things Microsoft, the "you can only burn recovery media once" limitation just inconveniences the honest users, but doesn't slow down the bad guys. Oh well....
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Can't Find Create Recovery Media Feature on T500 (XP downgrade from Vista)

Laptop is a T500 (2082-RF1), with XP Pro (sticker on bottom says Vista).
I cannot find any option to create recovery discs.
There is no Recovery option in ThinkVantage.
Doing a search for "recovery" finds only 3 files in PC Doctor folder. None of them are launch files that I can recognize so I dare not attempt them.
How do I access (or install) the Create Recovery Media function?
Solved!
Go to Solution.

Okay, for anybody else this could help...
Go to Control Panel...
Click the Levono's System health and Diagnostics icon
and follow the flow of instructions... you'll be led to download the Rescue and Recovery.
Now, why lenovo didn't include this with all new laptops, or make it easier to find (on the start-up screen, through ThinkVantage, etc) makes you wonder.

Creating Recovery Media using USB Flash Drive for Windows 8.1

I followed all the instructions to create a USB Flash Drive Recovery Media (insert 16 GB USB Flash Drive or >) and it said it will be created now (after I clicked on Create), however the next screen said to insert > 7.5 GB flash drive, then it said it was cancelled. I was attempting to use a San Disk Flash Drive and I am wondering if it is because it has some time of application on it. I was under the understanding that it would just "delete/erase" this (format it) and then create it, but it wouldn't. Any suggestions?

In Windows 8, one can create a "recovery drive" (called a System Repair Disc in Windows 7) that does not contain the recovery partition. (When you install Windows 8 yourself, there is no recovery partition.) It contains just the recovery environment.
Create a USB recovery drive [edited to repair the link]
Not sure what Shirley did, because it shouldn't take even that much space.
-Jerry

Create Recovery Media crashes on Windows 7 SP1 and Rescue and Recovery 4.51.0045.00

I installed Rescue and Recovery 4.51.0045.00 right after a fresh installation of Windows 7 Home Premium SP1 (Build 7601 64 bit) on my Thinkpad Edge 11. After hitting "Advanced Rescue and Recovery" and then "Create Rescue Media" I get a "Create Recover Media has stopped working" error with the problem Signature:
Problem Event Name: APPCRASH
Application Name: RRMedia.exe
Application Version: 4.51.27.0
Application Timestamp: 513d7dbd
Fault Module Name: RRMedia.exe
Fault Module Version: 4.51.27.0
Fault Module Timestamp: 513d7dbd
Exception Code: c0000005
Exception Offset: 00004451
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 3d61
Additional Information 2: 3d617f89c03aec75ed4c33477fb666c5
Additional Information 3: 62ba
Additional Information 4: 62ba33999ddd637bc95b614e6779b3ea
Uninstalling and then reinstalling Rescue and Recovery doesn't work - I still get the same error when trying to create recovery media.
Any tips would be greatly appreciated.

Hi Customer,
We have below workaround for fixing your issue, would you please try and feedback result to me?Thanks.
delete the below registrykey :
"spilock"="1382411866.78"
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Lenovo\spi\RNR Boot Media]
"spilock"="1382411866.78"

Create Recovery Media low disk space on C error

Hey everyone,
When I tried to create a recovery disc on my X301 Windows 7 to free up the partition, I got an error saying "No enough temporary disk space in C drive, Create Recovery Media will exit now." How much space do I need to free up on my C drive? I only have about 7.5 gb free on my 64gb SSD.
Thanks for your help!

You'll want at least 10 GB free before doing anything. As is, you can look at your recovery partition to see exactly how much you'll need, but Windows will always block off extra for some reason.

Yoga 13 doesn't have an option to create recovery media in onekey recovery

Hi All,
I am prepping a new Lenovo Yoga 13 for a user. I want to create recovery DVD(s) for the new system with the OneKey Recovery software. When I open the application there is no option to create media. There are only a backup option and a restore option. I called tech support and they advised if I attach a DVD drive the option to create media will appear. I did this but no luck..... I am attaching first a picture of what I see when I open One Key Recovery
And secondly to show that I do have a usb DVD connected here is a picture of the DVD attached with a blank DVD inside it.
I have downloaded the lastest update to the One Key Utility and am running version: 8.0.0.1519. Can anyone give any insight as to why the create recovery media isn't there for me?.....
Solved!
Go to Solution.

I found the answer to my own question. Essentially in version 8 there is no way to create recovery media with this utility. I came across the following link which I am going to try:
http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT076024

Why only once for create recovery media???

When I created recovery discs for my laptop using HP Recovery Manager, I got the message:
You can only create recovery media once for your system. So ensure that you keep it in a safe place
why only once?? what is the problem with creating the same discs again?
what is the difference when creating the recovery discs with the Backup and Restore utils in Windows 7? is it also once only? what is the difference between discs created with Windows 7 versus HP Recovery Manager?

I believe it is due to MS license agreement that only 1 set is allowed. You can of course use a CD/DVD burning program to copy the set you made.
The Recovery set you burn restores the laptop back to factory shipped state. Recovery made with Win 7 utility is an image of the hdd that includes added programs, data ,photos,etc.You also need to burn the System repair disc to use with the backup. You can use it as often as you like.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

ThinkPad Twist s230u and ThinkPad x201 Tablet Creating Recovery Media

Hi Lenovo Customer Support,
ThinkPad s230u( model number: 3347CTO) - Window 8 Pro.
Before I start using my Laptop, I want to create a Recovery Media as is shown when installed with all partitions. Meaning if I format all contents of Laptop I want a recovery Media brings back computer as I go it in the first place include all partitions. By default there are five hidden partition and one ntfs.
What is the procedure how to Create a Recovery Media? I heard only Flash Recovery exist for Window 8.
Also I have Window 8 Pro but when I tried this link procedure http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Create-Win-8-recovery-media-in-ThinkPad-Thi... I saw only Window 8 option and even then it reboot and did not work.
Also I did Flash Recovery and Took Faster with USB 3.0 Flash around 10 min around 16GB Space
Is it possible to do CD Recovery too ?
ThinkPad x201 Tablet(Model Number: 30933PG) - Wundow 7 Pro
Can you do Flash Recovery Media and CD Recovery Media under Window 7 Pro Enviro.
If you upgrade Hard drive to 1T and RAM to 16 G RAM , Can you Still do the Recovery Media?
What is the Procedure to successfully create Recovery Media.
Thanks.
saad

Reasons am asking this questions:
Sometime you test your computer doing a lot of things learning new technologies etc and suddenly you decide ok I want to take it back to factory state. Until now, most Thinkpad laptop does not come with recovery media. So how can I assure that my Recovery Media includes everything I used to have when I first receive unit.
I want to learn how to do that by myself by learning from the experts.
Until now what I know as follow:
ThinkPad x201:
I tried recovery media 3 DVD only with original hard drive works. I did not try Flash and not sure there is option yet.
If I upgrade unit with 1T hard drive and 16G Ram, How can I do Recovery Media?
ThinkPad Twist s230u:
I tried Flash and followed procedure on link in previous post. I took me less than 15 min to recovery whole. The question is does this process recover all the parts that is included when I receive unit.
I was unable to do recovery since I am not sure when in the Flash and during process showed to choose operating system was only Window 8 option not Window 8 Pro which came with unit.
I was able to do reset within system took longer and worked.
Is the recovery part build-in in the hardware or software partition? Is it included in the recovery Flash with all partitions?
Thank You. Awaiting for anyone to reply.
saad

NB305-02P Attempt to create recovery media damaged format of USB drive?

Similar Messages

Maybe you are looking for