NB305-105 - Battery empty after few days

Hi,
I have a Toshiba NB305-105 (2 Gb Ram - 250 GB HDD) with Windows 7 (64) Ultimate. My battery (6 cells) has a long life about 6 hours but I don't manage why when switch-on the day after the PC the battery is discharged. I verify that PC is right switch-off and not in hibernate/stand-by but after some days the battery is complete empty.
Someone has had the same problems?
Thank for any help.
Regards

Hey,
After few days the battery shouldnt be empty but it will lose a little bit power, thats normal behavior on all notebooks. Normally up to 5-10% is normal each night/day.
In your case I would check the BIOS. There you should find options like Wake up on LAN, Wake up on Keyboard and USB Sleep & Charge. Disable all these options because they are consuming power while notebook is turned off.
I did the same after this it lose just 2-4% so its very good! :)

Similar Messages

My Mac Book Pro 13 inch shuts down when I insert some usb on port. It will be dead for few days (no power, can't charge as well, no restarting) and after few days it will work? Any one facing same issue and any solutions please...

My Mac Book Pro 13 inch shuts down when I insert some usb on port. It will be dead for few days (no power, can't charge as well, no restarting) and after few days it will work? Any one facing same issue and any solutions please...

Hi ohmghimire,
Thanks for visiting Apple Support Communities.
If you're seeing unexpected behavior when using USB devices, try resetting the SMC on your MacBook Pro:
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find the article with these steps here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
If you still see this behavior after resetting the SMC, or your computer won't turn on, try the steps in this article next:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
Best Regards,
Jeremy

Photoshop Lag on Windows 8 after few days after installation

Hi all guys. I need your help if anybody can help me. When I install Photoshop everything is working perfectly but after few days Photoshop starts lagging. If I unninstall it and install it again there is not any lag and It's working good but after few days the lag is back. I'm confused really because on Windows 7 there is not that lag (Just on Windows 8). I'm using Photoshop in my job pretty much and this problem confuse me.

Everything is slowing down. If I make selection it takes effect after 3-4 seconds, if I'm using brush it takes effects after 3-4 seconds too. Whole Photoshop is lagging.

I have purchased IPhone 5S in Florida Mall when I was traveling to US.I bought this phone in unlocked condition. (Pl find attached Invoice copy).I started my phone when I came back in India. After few days (4-5 days) it started giving blue dump regularly.

Dear All,
I have purchased IPhone 5S in Florida Mall when I was traveling to US from India.I bought this phone in unlocked condition. I started my phone when I came back in India. After few days (4-5 days) it started giving blue dump regularly. Then I have contacted Authorized service centre (Maple) in India (Maharashtra – New Mumbai) and then Maple checked with Apple and Apple said this phone is not under International Warranty. But when I purchased this phone form Apple Florida Mall ,I have been told by Zach McKenzie (Sales Person) that it has an international warranty and u can approach to any authorized centre in India for any issues. And that’s the reason I have bought this phone.
But now I am in big trouble so tell me how can u help me in this regards.

Note this is a user forum hosted by Apple. You aren't talking to Apple here just other users.
Note that the iPhone warranty is NOT international and never has been. Your iPhone must be serviced in the country of purchase.
https://www.apple.com/legal/warranty/

I was using 3G in my iPad 3, after few days the 3G icon dispeared and instead E icon appeared and my internet is working slow with this E

i was using 3G in my iPad 3, after few days the 3G icon disappeared and instead E icon appeared and my net is very slow with this E icon

Did you Check in settings - cellular data that 3G is enabled? Menus could be named slightly different since I use iOS 6.

High memory utilization after few days - ciscoworks LMS 4.0.1

Hello,
I have the problem that our ciscoworks server gets out of memory after few days. The memory utilization is always getting higher an higher (above 95%). Sometimes it is only after 3 days and sometimes it is after 1 week. So it happens not regulary. Has anyone an idea what could be the problem? I have made an screenshot from the services which use a lot of memory. And at this time the memory utilization is getting higher and higher again....I think there is a problem with tomcat or dbsrv10.exe, there are also a lot of cwjava.exe running.
Kindly regards
David Mayer

Hello,
I have the same problem. First time I've tried to upgrade memory from 8gb to 16gb but I am still experiencing same issues (Memory is running on 98%). I'm not sure exactly what process it is causing this issue, because when I've checked all proccesses from all users running on this server and count them there is no 15 gb at all. My guess is the same for tomcat server which is responsible for RME collector, or correct me if I'm wrong.
Do you have any idea what can cause this problem.
I've tried to upgrade then to Cisco works Prime lan management 4.1, but server went with same issues.
Thanks a lot

I have 2 iphone 3gs so i plugged 1 of them into my laptop and i downloaded i tunes everything was ok i downloaded songs so after few days i got the other i phone and i did the same thing but every thing (pictures,contacts)of the1 phone was restored to2

i have 2 iphone 3gs so i plugged 1 of them into my laptop and i downloaded i tunes everything was ok i downloaded songs so after few days i got the other i phone and i did the same thing but every thing (pictures,contacts)of the1 phone was restored to the second i phone and all the pictures of the 2 phone had gone and it only had pictures and contacts of the 1 phone anybody plz help i am in egypt and there is noo apple stores in egypt so plz help

plzzzzz help quick

TS1470 hi i have an iphone 4s i did an update to ios 7 , after few days i got message to update it againe to 7.0.2 but i got a message to connect my iphone to the itune.and in my computer i got a message the iphone could not be restored error occurred 29

hi i have an iphone 4s i did an update to ios 7 , after few days i got message to update it againe to 7.0.2 but i got a message to connect my iphone to the itune.and in my computer i got a message the iphone could not be restored error occurred 29

l3az wrote:
... got a message the iphone could not be restored error occurred 29
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart

Hi, I recently updated my IOS to 7.1.1. After few days the camera apps is missing. I'm not able to find camera anywhere in my mobile. Please help me to get it back. thanks

Hi, I recently updated my IOS to 7.1.1. After few days the camera apps is missing. I'm not able to find camera anywhere in my mobile. Please help me to get it back. thanks

Hello there, Kumarlmk.
The following Featured Discussion deals with the issue you seem to be describing and provides some workable solutions:
The Camera app is suddenly missing from...: Apple Support Communities
https://discussions.apple.com/thread/5284736
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

C3750 Unable to ssh after few days!

Hi all,
If anyone could help me please, I'm having a problem with my switch, it seems that I'm losing the ablity to ssh to the switch after few days but if I reload it I can ssh into it again with no problem! At first I thought it was something wrong with my configuration so I've reconfugred the ssh, username, domain name and cleaned the rsa keys and regenrated new new ones.
My switch version is:
Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9NPE-M), Version 15.0(1)SE3, RELEASE SOFTWARE (fc1)

Thank you guys for the reply,
This is what I get when I try to ssh:
ssh [email protected]
[email protected]'s password:
Permission denied, please try again.
And Leo Laohoo, you guessed it right! it's look like a memory leaks, this is the output for "sh log":
*Mar 5 17:19:57.579: %AAA-3-ACCT_LOW_MEM_UID_FAIL: AAA unable to create UID for incoming calls due to insufficient processor memory
*Mar 5 17:19:58.385: %AAA-3-ACCT_LOW_MEM_UID_FAIL: AAA unable to create UID for incoming calls due to insufficient processor memory
*Mar 5 17:19:59.005: %AAA-3-ACCT_LOW_MEM_UID_FAIL: AAA unable to create UID for incoming calls due to insufficient processor memory
*Mar 6 23:22:38.979: %PARSER-5-CFGLOG_LOGGEDCMD: User:console logged command:!exec: enable
cs08#
Do you guys think of any work around other than down/upgrade the software? cuase the biggest issue now is, it's one of 9 switches that all run the same ISO version and all of them are on new production data center, and honestly I've had other weird issue with other switches too!

Battery empty after long inactivity

Dear fellow users, I have observed strange battery behavior with my Twist. I do not mean anything related to the battery life when computer is on, but when I shut the computer down. When I leave it off couple of days and then restart it, the battery capacity (how much it is charged) seems be at the same level, when I powered the computer off. But it happened to me twice already that I shut down the computer (no sleep, there would be a blinking light visible) and did not use it for several weeks. When I restarted Twist after several weeks of being off, the battery was completely empty (e.g., at 4% or 5% when it was originally at 50% or 99%). As the battery behaves normally when computer is running, I am wondering what a cause could be? Is there some software setting influencing power states (e.g., sleep / deep sleep / complete shut down)? Any other ideas? Thank you. Best, Pavel

UPDATE (new info): it happened again, but now more specifically. 1) Two weeks ago, I used twist on battery, turned it off with 50% battery remaining, and was not able to use it for more than a week (busy at work) --> battery level almost did not change after this, BUT 2) Two days ago, I used Twist connected to the power net (electricity), the battery was full at the end, then I turned Twist off ... only to find out that after 2 days (!) of no use the capacity of the battery was at 70% level. Any idea what is going on? I do not think there is a problem with the battery itself, but Twist "does something" sometimes...

Trash Folder gets emptied every few days

Every few days the Deleted folder gets emptied and I can't find any way to stop it. It makes it very difficult when I'm expecting a delivery or need to remember log in info etc.
I used to use Window Live Mail and the Google Inbox app on my phone and have it set up to access my mail as IMAP so I could check my mail where ever I was and that worked but when I noticed my mail vanishing I stopped using one then the other to try and figure out if one or the other was causing the problem. I'm currently only accessing my mail via the web page and it still vanishes. Sometimes after a few days and sometimes after a few hours. I've checked the options and there's no "Empty deleted folder" option that I can find.
I'm still on BT Yahgoo mail even though I was swapped once then that got reverted.

If you want to keep it, why put it in the trash folder? Would it not be better to either leave it in the incoming folder or move it to another folder that you could make for the purpose of keeping emails.
See link about Trash Folder
http://bt.custhelp.com/app/answers/detail/a_id/45794/~/bt-mail%3A-deleting-email-messages-and-managi...

U330 Touch - battery empty after sleep

Hi,
Since the new firmware update the machine is actually working fine, but my problem is the following. Even if my battery is fully charged and i leave it a night in sleep mode every morning the battery is empty!
Intel smart connect shouldn't allow it to wake up from 9 pm to 9 am, but still... You have any ideas what I could change??
Thank you already for any answer!

UPDATE (new info): it happened again, but now more specifically. 1) Two weeks ago, I used twist on battery, turned it off with 50% battery remaining, and was not able to use it for more than a week (busy at work) --> battery level almost did not change after this, BUT 2) Two days ago, I used Twist connected to the power net (electricity), the battery was full at the end, then I turned Twist off ... only to find out that after 2 days (!) of no use the capacity of the battery was at 70% level. Any idea what is going on? I do not think there is a problem with the battery itself, but Twist "does something" sometimes...

Toshiba WT310 in hibernation mode: battery discharges within few days

As the title says if fully charged and left in hibernation mode the battery discharges within a few days.
I thought it might have been due to "connected mode" but it isn't supported anyway.
Any ideas?

Well unsurprisingly not as easy as that after all.
I rang the number gave them the ID# for my support call, let him read through, explained again what I'd done to try and resolve. Asked him what we do next.
"I'll just go and ask my colleague"
So according to his colleague losing 10% power overnight when switched off is apparently as expected for a laptop/tablet.
I begged to differ and pointed out that according to the manual the battery should last 70 days when the Tablet is shutdown. Bit of a difference between 10 weeks and just over 1 week I said.
We then had to find that page in the manual to make sure I wasn't lying, I wasn't.
Still didn't mean there was a problem apparently, so I send it back and it's NFF I get charged 60+
So I said OK you send in writing that the manual is inaccurate and amend the manual and I'll accept that.
Can't do that...
Well then what next?
Escalated to the next level of support! Though I did have to assure them I was switching it off and not putting it into sleep by accident (the flashing light is the give away there) and that whilst I was waiting I would test it using "shutdown /p".
me "Shutdown -p sure if you like"
him "no /p!" didn't bother explaining it worked either way.
By the way I manage an IT Support Dept we do Hardware, Software and Network support, 10% power drain in 24 hours when shut down for a Laptop is not an expected thing. Not unless the battery is stuffed rather than FAIR as mine apparently is.
The story continues...

After HP support replaced Motherboard, the window 2008 r was running okay after few days I got a Black Screen stating windows is not genuine

After HP replaced the motherboard, and few days later I got a black desktop and windows not genuine afterwards. Any suggestion what I should do. I tried to use Microsoft support website on the server, and it will not let me proceed to any of their site.
The browser display security certification invalid. Any help would be appreciated.
Kind Regards

Have you tried re-activating your copy of Windows? Eg, either using the prompt that appears or going into My Computer properties and checking the activation status at the bottom of the page?
From memory, when you activate a copy of Windows it makes a note of the currently installed hardware (spec, serial numbers etc) so you can't just copy all the files onto another machine and use it there. My guess is that the setup has changed enough for
it to no longer recognise it as the same machine (though I thought it normally takes a few elements changing to trigger that reaction), and so thinks it's no longer genuine. Getting Windows to activate again may work, otherwise you'll probably need to phone
Microsoft to get them to sort it out and allow it to activate again.

NB305-105 - Battery empty after few days

Similar Messages

Maybe you are looking for