NB305: Windows is not valid error code 0xc004f063

I have a Toshiba NB305 mini notebook pll3ac-00f014
When i got it, it was completely dead. no screen no post.
Did get a charge light when pluged in. Tested as meny parts as i could. Left motherboard no good. Got a reman mobo replaced it viola laptop now working.
Formated the hard drive reinstalled windows starter from microsoft media activated fine.
Didn't want to use factory image to much bloat ware.
So have had it running for a few weeks comes up your copy of windows is not valid with an error code 0xc004f063 "the software license service reports that the BIOS is missing a required license"
How do i work around this problem?
Thanks in advance for the help.

Hi
As far as I know this message appears because you installed an copy of Windows OS and the system was not activated properly.
You said that you installed a new Windows system using Microsoft disk.
So use the key belonging to this Windows system:
Try uninstalling and reinstalling the product key and check if it helps.
1) Click Start and type CMD in the start search box.
2) select Run as Administrator.
3) In the command shell type the following command and press Enter after each command.
slmgr upk
slmgr ipk (your product key)
4) Activate the copy again and check if it works.

Similar Messages

Windows 7 Genuine Validation Error Code 0x8004fe21

Windows appears to be activated. The button to change the license key does not appear. Please advise how to solve this issue. I receive the error message below:
Below is the diagnostic report.
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: 0x0
Windows Product Key: *****-*****-XXXXX-XXXXX-XXXXX
Windows Product Key Hash: yr8OHoeXhbT4dc6MxGYjdAStSPY=
Windows Product ID: 00371-OEM-8992671-00008
Windows Product ID Type: 2
Windows License Type: OEM SLP
Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {139C114B-F907-4C8A-BFB0-5ADAC1666327}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Professional
Architecture: 0x00000000
Build lab: 7601.win7sp1_ldr.130707-1535
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files\Internet Explorer\iexplore.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Allowed
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{139C114B-F907-4C8A-BFB0-5ADAC1666327}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.048</OS><Architecture>x32</Architecture><PKey>*****-*****-*****-*****-6P6GT</PKey><PID>00371-OEM-8992671-00008</PID><PIDType>2</PIDType><SID>S-1-5-21-920686674-82526402-3460005700</SID><SYSTEM><Manufacturer>Hewlett-Packard</Manufacturer><Model>HP
EliteBook 8460p</Model></SYSTEM><BIOS><Manufacturer>Hewlett-Packard</Manufacturer><Version>68SCF Ver. F.08</Version><SMBIOSVersion major="2" minor="6"/><Date>20110826000000.000000+000</Date></BIOS><HWID>50643707018400FE</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Eastern
Standard Time(GMT-05:00)</TimeZone><iJoin>1</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>HPQOEM</OEMID><OEMTableID>SLIC-MPC</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Professional edition
Description: Windows Operating System - Windows(R) 7, OEM_SLP channel
Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00178-926-700008-02-1033-7600.0000-1422012
Installation ID: 009345334236140841192620903534347110985265171254181132
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: 6P6GT
License Status: Licensed
Remaining Windows rearm count: 3
Trusted time: 12/9/2013 4:17:21 PM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0x00000000
HealthStatus: 0x0000000000000000
Event Time Stamp: 12:9:2013 16:02
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: OgAAAAEAAgABAAMAAAACAAAABQABAAEAeqgwqIaqKK3m4LY44PJ4hNqSYj34Z978ZjJqwrZGpFkucw==
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes
Windows marker version: 0x20001
OEMID and OEMTableID Consistent: yes
BIOS Information:
ACPI Table Name OEMID Value
OEMTableID Value
APIC HPQOEM
161E
FACP HPQOEM
161E
HPET HPQOEM
161E
MCFG HPQOEM
161E
TCPA HPQOEM
161E
SSDT HPQOEM
SataAhci
SSDT HPQOEM
SataAhci
SLIC HPQOEM
SLIC-MPC
SSDT HPQOEM
SataAhci
SSDT HPQOEM
SataAhci
ASF! HPQOEM
161E

Hi,
I am just writing to check the status of this thread. Was the information provided in previous
reply helpful to you? Do you have any further questions or concerns? Please feel free to let us know.
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

Backup Windows 7 not possible, error code 0x81000101

Backing up Windows 7 impossible, it stops at 7% and after a while a time out message will be shown with code 0x81000101. I tried everething as specified by cdobbs on earlier questions, no result. The external backup disk, usb connected, is 150 Gb, clean and formatted. Backing up mine laptop, (Windows XP ) no problem at all. To copy C to the backup drive will not succeed either due to open system files, e.g. hiberfile.sys, pagefile.sys, ntuer.date etc. Any solution ?

This error can occur if the Shadow Copy services are not running. The backup applications and System Restore depend on these services.
Perform the following.
Open Control Panel.
Click the Classic View in the Tasks pane.
Double click Administrative Tools.
Double click Services.
Scroll down and double click the Microsoft Software Shadow Copy Provider.
In the Startup Type menu, select Automatic.
Click the Start button.
Click Apply / OK.
Next, scroll down to the Volume Shadow Copy service and perform the same steps.
Exit everything and reboot the computer.
IF that doesn't work
Did your computer come with a Recovery Partition on the drive? (Check the computers documentation)
If it did, you cannot have any backup software or System Restore set to backup or monitor that drive.
Go to Control Panel.
Click on Classic View in the Task Pane.
Double click System.
Select Advanced System Settings in the Tasks Pane.
Click the System Protection Tab.
In the Available Disks section, make sure that the backup partition is not selected. If it is, remove the check mark.
After this is done or if this does not work, go to Start/All Programs/Accessories/System Tools and click on Disk Cleanup.
In the Options dialog, select 'Files from all users on this computer'. Click the C: system drive. When the scan is completed, click the 'More Options' Tab. In the 'System Restore and Shadow Copies' section, click the 'Cleanup' button. In the 'Are you sure......' popup, click Delete. Click OK.
Wait for the Disk Cleanup to complete.
Now, go back into Disk Cleanup and follow the same procedure for any other drives that appear in the drop down menu where you selected the C: drive the first time.
Exit everything and reboot the computer.
After the computer reboots, check System Restore again. If System Restore is still not working, go back into System Protection and turn off System Restore for all drives and reboot the computer again. This will delete all restore points on all drives.
After the reboot, go back and enable System Restore for the C: volume only. Create a new restore point for that drive.
Let me know the results.
MCSE, MCSA, MCDST
[If this post helps to resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer faster.]

I am getting an error message after 2 years saying my Windows 7 in not authentic, error code 7601.

I need baby steps to understand where to go and what to do. I can't figure out how to do a diagnostic report. Seems like Windows would have links to click and open? Do I type the information in the address bar or what? Then, how do
I submit the report or is it even necessary? I am frustrated and feel it isn't right for me to have to repurchase Windows 7 just to get it to be 'authentic'. It was authentic, is authentic, but somehow I must have downloaded or deleted something
that messed it all up.
I hope you can deal with my slow mentality. I had surgery two weeks ago and I'm not at my best, but even at my best I'm not very computer savy. Thank you so much.
Pam

Hi,
Apologize for the late reply.
Regarding Windows error code 7601, we need to change the product key or activate it from phone, we may follow the steps mentioned by
george1009 in this thread:
Windows 7 Build 7601 - Error Code 0xC004F063, a month after reinstall
Best regards
Michael Shao
TechNet Community Support

Crystal report for visual studio 2010 data source object is not valid error

Hello,
I receive an "data source object is not valid" error when I want to print one CR document after setting an ADODB.Recordset on SetDataSource method of my report.
On my developer station, this operation works without problem but on client station, I get this error.
The redistributable package for client is installed on client side (CRRuntime_32bit_13_0_1.msi).
Can someone help me?
Thank you.

Thank's for your answers
Dim rsPkLst As ADODB.Recordset = Nothing
Dim report As New crPickingList
' Fill ADODB.Recordset with SQL Statment
If rsPkLst.RecordCount > 0 Then
report.SetDataSource(rsPkLst) ' Error : The data source object is invalid
EndIf
This error appears during "report.SetDataSource(rsPkLst)" instruction.
ADODB drivers are already installed and my ADODB.Recordset is filled with good records.
This project is an updated project from Visual Studio 2003 to Visual studio 2010 and the old version was running fine.
Developer and client station runs under Windows XP SP3.
On developer side I install CRforVS_13_0_1 (BuildVersion=13.0.1.220.Cortez_CR4VS).
On client side I install CRRuntime_32bit_13_0_1.msi.
Both stations use Microsoft .Net Framework 4.
Move to ADO.NET is a solution but, for the moment, I do not have the time to change all applications from my company.
(I get this error from all application updated from VS 2003 to VS 2010 developed since 2005)
David.

Error accessing file template file not found (error code 2)

We have 3 admins that work on the website so we use the Check In/ Check Out feature of DW. We all have DW CS6.
When I update the template I have no problem (I work on a mac). However, if one of the other admins (Windows) tries he gets the following message: Error accessing file template file "C:\filepath\filename.dwt": file not found (error code 2).
I looked at this thread: Re: Dreamweaver Template not updating pages error code 2? but the only solution offered there is to change the template tag from <!-- InstanceBegin... to <!-- TemplateBegin... If this is the solution, how do you do this?
When I go to the url of the template http://www.christophorushouse.com.au/Templates/chrv-main-template.dwt it says it's been (re)moved or renamed, but then I have a feeling you can't view/access a template this way. All pages of the website feed of this template.
Any help would be appreciated.
Thanks

We have 3 admins that work on the website so we use the Check In/ Check Out feature of DW. We all have DW CS6.
When I update the template I have no problem (I work on a mac). However, if one of the other admins (Windows) tries he gets the following message: Error accessing file template file "C:\filepath\filename.dwt": file not found (error code 2).
I looked at this thread: Re: Dreamweaver Template not updating pages error code 2? but the only solution offered there is to change the template tag from <!-- InstanceBegin... to <!-- TemplateBegin... If this is the solution, how do you do this?
When I go to the url of the template http://www.christophorushouse.com.au/Templates/chrv-main-template.dwt it says it's been (re)moved or renamed, but then I have a feeling you can't view/access a template this way. All pages of the website feed of this template.
Any help would be appreciated.
Thanks

After installing the most recent iTunes update/version iTunes will no longer run on my PC. I receive a window with the Microsoft error code R6034

After installing the most recent iTunes update/version iTunes will no longer run on my PC (Windows 7). I receive multiple error windows with the Microsoft error code R6034. Microsoft's Help site states that this error occurs when a driver attempts to access the C++ library without a "Manifest". I do not know what a manifest is, but apparently any attempt to directly access the C++ library is not permitted. The site instructs the viewer to contact the application developer.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Activation error: Printer not activated, error code 20

I have had my officejet 4215 all-in-one printer well over a year and it has connected and printed whatever I wanted. Yesterday when I wanted to print an email it would not and the following box popped up: Activation error: Printer not activated, error code 20. Then the next box that popped up said: Printer Error An unknown error occurred while printing.
If I copy the email over to a Microsoft Windows page, then i can print it fine.
Any idea how to fix this so I can print email's like I used to?
Rey

What operating system? What email program are you trying to print from?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Installer - all day I get Server not responding Error code 207

Trying to install CC Desktop - all day I get Server not responding Error code 207. Is this an internet performance issue or a real issue with the server?

Hi,
Thanks for the suggestion Romit. I believe the reported error code was installer app code rather than Windows error code.
I have now had my broadband installed so have retried this install again, rather than on original public wifi. I'm pleased to say that it has all installed very well. I'm therefore pretty sure that it was an internet performance issue.
Hope this helps anyone in the future.

My ITunes will not work error code 2503

window XP cannot uninstall ITunes. ITunes will not operate. error code 2503

Hello, bearbassman.
Thank you for visiting Apple Support Communities.
Here are the steps I would recommend going through when receiving this error.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Jason H.

When I try to print from web page I get "printer not activated - error code 30", but I can copy text into Word document & printer works.

I am unable to print anything from an internet web page. I continually get "printer not activated, error code- 30" followed by "An unknown error occurred while printing". I can copy the material from the web page, place into a Word document and then print. This just started yesterday and I have no idea why. Would appreciate your advice!

See this:
[http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page]

When I try to print from web page I get "printer not activated - error code 30", printer works on Internet Explorer

When I try to print from web page I get a dialogue box "Printer not activated - error code 30" followed by a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a Word document, I can print a copy. This issue just started this week; I have not encountered this problem prior to this week. Please advise.

What does that error message say?
See this: http://kb.mozillazine.org/Problems_printing_web_pages

I have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

i have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

Try putting it into "Disk Mode" http://docs.info.apple.com/article.html?artnum=93651
Then with it in this mode connect it to the PC and try to run the latest iPod updater to do a restore and update software if you have the option. the latest iPod updater is 2006-03-23 and can be downloaded here http://www.apple.com/ipod/download/

Printer will not work: error code 0xc19a0022

Printer will not work: error code 0xc19a0022

Hello citizenED,
Welcome to the HP Forums.
I see that you are getting the error code " 0xc19a0022 " .
I do have a few steps that we can try.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error ...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HT4623 I can not get connected to App Store , download or update any apps, EVEN I DID RESET ALL SETTING , STILL I RECIEVE A MESSAGE says: YOUR REQUEST IS NOT PROCESSED ,ERROR COD: 109 !! WHAT DOSE IT MEAN? HOW CAN I SOLVE THE PROBLEM??

I can not get connected to AppStore , DOWNLOAD OR UPDATE ANY OF MY APPS , WHEN I GO FOR INSTALLING , THE MESSAGE SAYS: YOIR REQUEST IS NOT PROCESSED , ERROR CODE, 1009!!! HOW CAN I SOLVE THIS PROBLEM??

Try contacting the iTunes support staff, they do the app store also, at: http://www.apple.com/emea/support/itunes/contact.html

NB305: Windows is not valid error code 0xc004f063

Similar Messages

Maybe you are looking for