NB505-N500 Won't Start After Installing New RAM

I just watched a YouTube video showing how to replace RAM in a Toshiba netbook, but now my computer won't start even after I put back in the original RAM. On the parts label, it shows D3. I bought Crucial CT25664BC1067 2GB 204-PIN PC3-8500 SODIMM DDR3 Memory Module. Can someone provide some guida...
Thank you.
Solved!
Go to Solution.

You may want to contact Crucial.
There's a lot of talk of incompatibility in the one-star reviews on Amazon, which are about 14% of the reviews.
- Peter

Similar Messages

  • MacBook Pro won't start after installing new hard drive and me

    I changed the hard drive and also upgraded the memory on a mid 2010 13 inch Mac and then used the disks that came with it to reinstall the OS that came on that disk. It worked fine and installed and then the screen came on to transfer from the time machine to the new hard drive so I said yes, and it seems to work fine but then when it finished it asked me for a password. I hadn't put a password on it so that was a surprise. I tried several things but it finally only had the option to restart and when I did that it seemed like it was starting with the apple symbol and the little gear but then it went to a Gray screen with the little gear, and then seems to freeze and then finally goes to the blue screen.  The disk to reinstall is still in the drive but I can't seem to get the install to start again. I've tried holding down the c key and starting, I've tried holding down the command plus the c key and nothing....just goes to the blue screen. Any ideas on how to fix this?
    Thanks

    Hi,
    Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
    Assuming that this is just a problem with the Recovery process, there is a straight forward work around if you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
    If you don't have access to a retail disc, you can create an installation disc yourself using another PC - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here.  These Images are clean and from a well-respected source, however there are only limited versions available.
    Windows-7 sp1-iso-official-32-bit-and-64-bit
    Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
    http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
    Any additional drivers you may need can be found Here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Mac Mini won't start after installing OS X 10.6.3

    My Mac Mini won't start after installing Mac OS X Snow Leopard 10.6.3. When I turn it on, the Apple logo appears and the initialization line starts to fill, but it suddenly stops. It does that again and stops at the same point, but this time it shuts down. What should I do?

    If you are coming from 10.5.8, hopefully you backed up your important data first. Your mini will need at minimum, 1 GB of RAM to install Snow Leopard and at least 5 GB of storage remaining on your boot drive.
    I treat 10.6.3 as a fresh, full install over a 10.5.8 system. That means I choose Disk Utility from the Installer's menu and repartition the boot drive as a single partition, Mac OS X Extended (Journaled) format, and use the GUID partition scheme from the options button. At this point, while still in Disk Utility, I would verify the drive under First Aid.
    Then I turn the installer loose, and reboot into a working 10.6.3 system, ready for the software updates that take the machine to 10.6.8.
    So, following the above guidelines, reinstall 10.6.3.

  • Safari won't start, after installing X Lion

    Safari won't start, after installing X Lion

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
    Step 1
    Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • Mac crashes regularly after installing new RAM

    My laptop crashes at least once a day ever since installing new RAM. It seems to be triggered by quitting programs, usually Firefox, Logic or Spotify. There was nothing else connected to the Mac that brought about the latest crash but I do use an Mbox 2 on a regular basis.
    Below is the last crash report and also the RAM profile. It's Kingston brand if that means anything.
    *_Crash Report:_*
    Interval Since Last Panic Report: 55868 sec
    Panics Since Last Report: 1
    Anonymous UUID: AEEF5666-4C4E-4FC1-AC7A-5A500F952BF9
    Sat Jan 22 00:00:25 2011
    panic(cpu 1 caller 0x2aab55): Kernel trap at 0x8b042474, type 14=page fault, registers:
    CR0: 0x8001003b, CR2: 0x8b042474, CR3: 0x00100000, CR4: 0x00000660
    EAX: 0x09947100, EBX: 0x09ad4a00, ECX: 0xe15f0000, EDX: 0x0a133800
    CR2: 0x8b042474, EBP: 0x5294bb68, ESI: 0x08bd7f40, EDI: 0x0085f838
    EFL: 0x00010246, EIP: 0x8b042474, CS: 0x00000008, DS: 0x03450010
    Error code: 0x00000010
    Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
    0x5294b968 : 0x21b50c (0x5d42fc 0x5294b99c 0x223974 0x0)
    0x5294b9b8 : 0x2aab55 (0x59616c 0x8b042474 0xe 0x596336)
    0x5294ba98 : 0x2a09a8 (0x5294bab0 0x246 0x5294bb68 0x8b042474)
    0x5294baa8 : 0x8b042474 (0xe 0x48 0x52940010 0x230010)
    0x5294bb68 : 0x1854f8f (0x9ad4a00 0x0 0x5294bbf8 0x60)
    0x5294bb88 : 0x4ff5ae (0x9ad4b00 0x85f838 0x1 0x0)
    0x5294bba8 : 0x50f6e0 (0x9ad4b00 0x85f838 0x5294bbd8 0x4ff931)
    0x5294bbd8 : 0x50f854 (0x8bd7f40 0x0 0x1 0x0)
    0x5294bbf8 : 0x4ff5ae (0x8bd7f40 0x0 0x1 0x1)
    0x5294bc18 : 0x4ff5c9 (0x8bd7f40 0x0 0x5294bc48 0x4ff5ae)
    0x5294bc38 : 0x531e12 (0x8bd7f40 0xffff 0x8bd4f84 0x4ff5c9)
    0x5294bc58 : 0x531e45 (0x8bd4f80 0x246 0x5294bc98 0xb18e540)
    0x5294bc78 : 0x4ff5ae (0x8bd4f80 0x0 0x1 0x1e)
    0x5294bc98 : 0x4ff5c9 (0x8bd4f80 0x0 0x5294bce8 0x0)
    0x5294bcb8 : 0x2844eb (0x8bd4f80 0xb18e540 0x1e 0x5294bce8)
    0x5294bd08 : 0x21d8d1 (0xa088398 0xb2555a0 0x997aa24 0x1)
    0x5294bd48 : 0x210a3a (0xa088300 0x12 0x5294bda8 0x20f45c)
    0x5294bda8 : 0x21dda0 (0xa088300 0x10000 0x0 0x2107c2)
    0x5294bdd8 : 0x23f567 (0x5294bdfc 0x24 0xa4289e4 0x0)
    0x5294be28 : 0x214f6f (0xb18e540 0x1 0x1 0x221bb4)
    0x5294be78 : 0x215581 (0x7fc7420 0x33303 0x43dfe330 0x8f1e1f4)
    0x5294beb8 : 0x22c521 (0x7fc7420 0xc971640 0x5294bf08 0x47a0f3)
    0x5294bf08 : 0x47ab28 (0x8f1e1f4 0x0 0x0 0x2ea2)
    0x5294bf58 : 0x47ab56 (0x8f20000 0x0 0xc971684 0x0)
    0x5294bf78 : 0x4f0f7d (0x8f20000 0xc971640 0xc971684 0x0)
    0x5294bfc8 : 0x2a0ef8 (0xa1916c0 0x1 0x10 0xa194964)
    Kernel Extensions in backtrace (with dependencies):
    com.digidesign.mbox2.driver(8.0.0f1)@0x184e000->0x1871fff
    dependency: com.apple.iokit.IOAudioFamily(1.7.9fc4)@0x90c000
    dependency: com.apple.iokit.IOUSBFamily(4.1.7)@0x1232000
    dependency: com.apple.driver.AppleUSBMergeNub(4.1.5)@0x1292000
    dependency: com.apple.kext.OSvKernDSPLib(1.3)@0x908000
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x948000
    dependency: com.apple.driver.AppleUSBComposite(3.9.0)@0x1266000
    BSD process name corresponding to current thread: Spotify
    Mac OS version:
    10H574
    Kernel version:
    Darwin Kernel Version 10.5.0: Fri Nov 5 23:20:39 PDT 2010; root:xnu-1504.9.17~1/RELEASE_I386
    System model name: MacBook7,1 (Mac-F22C89C8)
    System uptime in nanoseconds: 10016535514139
    unloaded kexts:
    com.apple.driver.AppleMCP89RootPortPM 1.11 (addr 0x11cd000, size 0x20480) - last unloaded 250987080117
    loaded kexts:
    com.digidesign.mbox2.driver 8.0.0f1 - last loaded 49888220612
    com.rogueamoeba.hermes 2.0.2
    com.paceap.kext.pacesupport.snowleopard 5.7.2
    com.Cycling74.driver.Soundflower 1.5.1
    tc.tctechnologies.driver.PaeFireStudio 8028
    com.digidesign.iokit.DigiIO 8.0.0f1
    com.digidesign.iokit.DigiDal 8.0.0f1
    com.apple.driver.AppleHWSensor 1.9.3d0
    com.apple.filesystems.autofs 2.1.0
    com.apple.driver.AGPM 100.12.19
    com.apple.driver.AppleMikeyHIDDriver 1.2.0
    com.apple.driver.AppleMikeyDriver 1.9.9f12
    com.apple.driver.AudioAUUC 1.13
    com.apple.driver.AppleUpstreamUserClient 3.4.5
    com.apple.driver.AppleMCCSControl 1.0.17
    com.apple.driver.SMCMotionSensor 3.0.0d4
    com.apple.driver.AppleHDA 1.9.9f12
    com.apple.DontSteal_Mac_OSX 7.0.0
    com.apple.driver.AudioIPCDriver 1.1.6
    com.apple.driver.AppleIntelPenrynProfile 17
    com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
    com.apple.driver.AppleLPC 1.4.12
    com.apple.driver.AppleBacklight 170.0.34
    com.apple.GeForce 6.2.4
    com.apple.driver.AppleUSBTCButtons 200.3.2
    com.apple.driver.AppleUSBTCKeyboard 200.3.2
    com.apple.iokit.SCSITaskUserClient 2.6.5
    com.apple.BootCache 31
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.iokit.IOAHCIBlockStorage 1.6.3
    com.apple.driver.AppleHPET 1.5
    com.apple.driver.AirPortBrcm43224 426.36.1
    com.apple.driver.AppleAHCIPort 2.1.5
    com.apple.driver.AppleUSBHub 4.1.7
    com.apple.nvenet 2.0.15
    com.apple.driver.AppleUSBEHCI 4.1.7
    com.apple.driver.AppleUSBOHCI 4.1.5
    com.apple.driver.AppleSmartBatteryManager 160.0.0
    com.apple.driver.AppleEFINVRAM 1.4.0
    com.apple.driver.AppleRTC 1.3.1
    com.apple.driver.AppleACPIButtons 1.3.5
    com.apple.driver.AppleSMBIOS 1.6
    com.apple.driver.AppleACPIEC 1.3.5
    com.apple.driver.AppleAPIC 1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
    com.apple.security.sandbox 1
    com.apple.security.quarantine 0
    com.apple.nke.applicationfirewall 2.1.11
    com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
    com.apple.driver.AppleProfileReadCounterAction 17
    com.apple.driver.AppleProfileTimestampAction 10
    com.apple.driver.AppleProfileThreadInfoAction 14
    com.apple.driver.AppleProfileRegisterStateAction 10
    com.apple.driver.AppleProfileKEventAction 10
    com.apple.driver.AppleProfileCallstackAction 20
    com.apple.driver.AppleSMBusController 1.0.8d0
    com.apple.driver.DspFuncLib 1.9.9f12
    com.apple.iokit.IOFireWireFamily 4.2.6
    com.apple.iokit.IOSurface 74.2
    com.apple.iokit.IOBluetoothSerialManager 2.3.8f7
    com.apple.iokit.IOSerialFamily 10.0.3
    com.apple.iokit.IOAudioFamily 1.7.9fc4
    com.apple.kext.OSvKernDSPLib 1.3
    com.apple.driver.AppleHDAController 1.9.9f12
    com.apple.iokit.IOHDAFamily 1.9.9f12
    com.apple.driver.AppleSMBusPCI 1.0.8d0
    com.apple.iokit.AppleProfileFamily 41
    com.apple.driver.AppleSMC 3.1.0d3
    com.apple.driver.IOPlatformPluginFamily 4.5.0d5
    com.apple.nvidia.nv50hal 6.2.4
    com.apple.NVDAResman 6.2.4
    com.apple.iokit.IONDRVSupport 2.2
    com.apple.iokit.IOGraphicsFamily 2.2
    com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.8f7
    com.apple.driver.AppleUSBBluetoothHCIController 2.3.8f7
    com.apple.iokit.IOBluetoothFamily 2.3.8f7
    com.apple.driver.AppleUSBMultitouch 206.6
    com.apple.iokit.IOUSBHIDDriver 4.1.5
    com.apple.driver.AppleUSBMergeNub 4.1.5
    com.apple.driver.AppleUSBComposite 3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
    com.apple.iokit.IOBDStorageFamily 1.6
    com.apple.iokit.IODVDStorageFamily 1.6
    com.apple.iokit.IOCDStorageFamily 1.6
    com.apple.driver.XsanFilter 402.1
    com.apple.iokit.IOAHCISerialATAPI 1.2.5
    com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
    com.apple.iokit.IO80211Family 312
    com.apple.iokit.IOAHCIFamily 2.0.4
    com.apple.iokit.IOUSBUserClient 4.1.5
    com.apple.iokit.IONetworkingFamily 1.10
    com.apple.driver.NVSMU 2.2.7
    com.apple.iokit.IOUSBFamily 4.1.7
    com.apple.driver.AppleEFIRuntime 1.4.0
    com.apple.iokit.IOHIDFamily 1.6.5
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 6
    com.apple.driver.DiskImages 289
    com.apple.iokit.IOStorageFamily 1.6.2
    com.apple.driver.AppleACPIPlatform 1.3.5
    com.apple.iokit.IOPCIFamily 2.6
    com.apple.iokit.IOACPIFamily 1.3.0
    Model: MacBook7,1, BootROM MB71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.60f5
    Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.10.131.36.1)
    Bluetooth: Version 2.3.8f7, 2 service, 12 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: TOSHIBA MK2555GSXF, 232.89 GB
    Serial ATA Device: MATSHITADVD-R UJ-898
    USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8218, 0x06630000
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0237, 0x06300000
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24600000
    *_Memory Profile_*
    Memory Slots:
    ECC: Disabled
    BANK 0/DIMM0:
    Size: 2 GB
    Type: DDR3
    Speed: 1067 MHz
    Status: OK
    Manufacturer: 0x0000
    Part Number: 0x000000000000000000000000000000000000
    Serial Number: 0x00000000
    BANK 1/DIMM0:
    Size: 2 GB
    Type: DDR3
    Speed: 1067 MHz
    Status: OK
    Manufacturer: 0x0000
    Part Number: 0x000000000000000000000000000000000000
    Serial Number: 0x00000000

    It's almost impossible to trace back the panic report to a specific cause, but it's highly suspicious that you started experiencing problems after installing new RAM.
    It's also strange that your RAM has no stated VendorID, Part Number or Serial Number.
    I would return this memory poste haste.
    Alternatively, if the DIMMs are from Kingston's ValueRAM range, just dump them in the garbage because that's where they belong. While you're there, look for any other RAM that someone else has thrown away - chances are its ValueRAM, too (hint: I have never seen a single ValueRAM DIMM work in any of my systems, so I avoid them like the plague - shame, since Kingston used to have such a good reputation).

  • Laptop freezes after installing new ram card.

    Hi,
    i recently upgraded my ram card on my toshiba c650d laptop. after installing the ram card the laptop began to freeze while in the desktop and then it could be resumed when Alt+Ctrl+Del was pressed.
    and the laptop wouldn't wake from the sleep mode.... 
    please help me this is urgent...as for im leaving my home country for studies.
    thanks for the help in advance
    Malith Ratnayake.

    Hello Malith Ratnayake,
    After changing the old RAM by the new one, this issue occurs?
    If the issue doesn’t occur when you change back to use old ram, I think it is the RAM hardware issue.
    Please contact the hardware manufacturer for better support.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • 4 hrs later - Computer shut down after installing new RAM (mid 2007 Imac)

    Mid 2007 imac and I installed new Ram. It worked for 4 hrs then the Imac shutdown. The pressed power button but no power. Unplugged and replugged the power cord and 3 beeps sounded. I am wondering if it worked for 4 hrs or so, then why did it would it fail 4 hrs later?
    I am running the correct ram because in system profiler under memory - it said that everything was ok.
    Any ideas?

    or maybe the back tray wasn't tight enough?
    I re-installed it now and so far so good.... I pressed tight and in an upwards motion. We'll see what happens

  • DeskJet 5550 won't print after installing new black ink cartridge.

    I recently got a new Dell computer with Windows Vista 64-bit OS.  Printer was working fine until I replaced the black ink cartridge.  It printed out the check page like normal after installing the cartridge but will not print anything else now.  Not even a test page.  I tried pulling the cartridge out and putting it back in.  Tried unplugging the plugs on the back of the printer and plugging back in.  Tried turning the printer off and back on.  Also tried restarting the computer.  I downloaded the HP Print Diagnostic Report and it could not find any problems.  Could there be a problem with the ink cartridge itself?
    This question was solved.
    View Solution.

    Well first I went and bought another black ink cartridge to rule out the cartridge being the problem.  That was not it.  So then I unplugged the printer and cleaned it thoroughly and plugged it back in.  Still didn't work.  So I went into the properties on my printer and started messing with the settings.  FINALLY I FIXED IT!  I clicked on the Advanced Tab and then clicked on Print Processor.  I then changed it to WinPrint and retried the Print Test Page on the General Tab and it worked!  Woo Hoo!

  • PowerMac G4 (FW 800) Won't Start After Installing Airport Extreme Card!

    After installing an Airport Extreme Card in my G4 FW 800, the computer will not Chime or Start Up; shortly thereafter, the Fan begins to Run erratically.
    Without the Airport Card installed, the CPU runs normal, with the exception of the clock needing to be reset.
    Any help is Greatly Appreciated! -Nico

    Hey Tom, thanks for the response. I have tried holding Command-Option-R-P down (resetting the PRAM) at startup with no avail. I have also pressed the PMU button with and without the Airport Card installed. Still no luck. I am pretty stumped. I ran a hardware check on the machine, and it has come back successful without the card.
    The previous owner installed an extra internal HD and some memory. I have since installed a new PCI graphics card. Do you think these have anything to do with it?

  • Windows 7 won't start after installing graphic driver

    hi guys
    i have a probook 4530s (i5) laptop and recently i encountered a problem with graphics.
    after installing a fresh copy of windows 7 x64, i installed lates  driver for graphics (sp55947) but after a reset, windows won't pass the first "starting windows" page unless i go to bios setting and uncheck "switchable graphics" option,
    but after that i dont have the radeon 6490m in my device manager anymore. i also tried the latest update for bios but no success with the problem..
    i hope you can help me..

    @M3is4M 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Won't boot after installing new video card

    Hello, I have a H8-1284 desktop computer, and a few days ago the video card went. So i bought a Geforce GTX 650 video card, and after installing the card and starting the comp, it just hangs at the HP logo splash screen. So I put an older geforce 8800, and it boots no problem. When I try the new Geforce GTX 650 card, same thing, just hangs at splash screen.  I checked the bios and there doent seem to be anything there that wouild help. My power supply is 460 w, and the new card only needs 400 w, any and all help will be greatly appreciated
    This question was solved.
    View Solution.

    Hi,
    Most PCI-E 3.0 cards are backwards compatible with PCI-E 2.0 slots.  However, in order to get PCI-E version 3 you need to be using an Ivy Bridge processor.  Review these specifications for a typical NVIDIA GTX 650.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Pages won't open after installing new HD

    I have a 2009 intel iMac running Snow Leopard (10.6.8).  After installing a new hard drive, the OS, and all my programs, none of the iWork 09 programs (Pages, Numbers, Keynote) will open.  (All other programs work fine.)  For example, when I click on the Pages icon, it says "Pages could not open because of a problem... Click Report to see more detailed information and send a report to Apple."  When I click on Report, it says:
    Process:    
    Pages [5683]
    Path:       
    /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
    Identifier: 
    com.apple.iWork.Pages
    Version:    
    Build Info: 
    Pages-7270000~9
    Code Type:  
    X86 (Native)
    Parent Process:  launchd [5264]
    Date/Time:  
    2012-12-10 06:52:01.480 +0000
    OS Version: 
    Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Sleep/Wake UUID: CF45A385-A5A1-495A-ABD4-5FA08FD560A5
    Interval Since Last Report:     
    600344 sec
    Crashes Since Last Report:      
    14
    Per-App Crashes Since Last Report:   9
    Anonymous UUID:                 
    39E2D0B7-95B8-433E-A50B-8070BC9FF2F9
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: @rpath/Inventor.framework/Versions/C/Inventor
      Referenced from: /Library/Application Support/iWork '09/Frameworks/SFCompatibility.framework/Versions/A/SFCompatibility
      Reason: image not found
    Binary Images:
    0x8fe00000 - 0x8fe4163b  dyld 132.1 (???) <4CDE4F04-0DD6-224E-ACE5-3C06E169A801> /usr/lib/dyld
    Model: iMac9,1, BootROM IM91.008D.B08, 2 processors, Intel Core 2 Duo, 2.66 GHz, 4 GB, SMC 1.37f3
    Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: WDC WD1002FAEX-00Z3A0, 931.51 GB
    Serial ATA Device: OPTIARC DVD RW AD-5670S
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8502, 0x24400000 / 3
    USB Device: Keyboard Hub, 0x05ac  (Apple Inc.), 0x1005, 0x24300000 / 2
    USB Device: Apple Optical USB Mouse, 0x05ac  (Apple Inc.), 0x0304, 0x24310000 / 5
    USB Device: Apple Keyboard, 0x05ac  (Apple Inc.), 0x021d, 0x24320000 / 4
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x04500000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8215, 0x06110000 / 3
    FireWire Device: FreeAgent FW, Seagate, Up to 800 Mb/sec
    I tried reinstalling iWork, but it has no impact.  How can I fix this?  Thanks.

    OK, I did this, and Pages still doesn't open.  This time the report says:
    Process:    
    Pages [135]
    Path:       
    /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
    Identifier: 
    com.apple.iWork.Pages
    Version:    
    Build Info: 
    Pages-8290000~1
    Code Type:  
    X86 (Native)
    Parent Process:  launchd [100]
    Date/Time:  
    2012-12-11 07:05:42.513 +0000
    OS Version: 
    Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:     
    632994 sec
    Crashes Since Last Report:      
    16
    Per-App Crashes Since Last Report:   11
    Anonymous UUID:                 
    39E2D0B7-95B8-433E-A50B-8070BC9FF2F9
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: @rpath/Inventor.framework/Versions/C/Inventor
      Referenced from: /Library/Application Support/iWork '09/Frameworks/SFCompatibility.framework/Versions/A/SFCompatibility
      Reason: image not found
    Binary Images:
    0x8fe00000 - 0x8fe4163b  dyld 132.1 (???) <4CDE4F04-0DD6-224E-ACE5-3C06E169A801> /usr/lib/dyld
    Model: iMac9,1, BootROM IM91.008D.B08, 2 processors, Intel Core 2 Duo, 2.66 GHz, 4 GB, SMC 1.37f3
    Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 0 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: WDC WD1002FAEX-00Z3A0, 931.51 GB
    Serial ATA Device: OPTIARC DVD RW AD-5670S
    USB Device: Built-in iSight, 0x05ac  (Apple Inc.), 0x8502, 0x24400000 / 3
    USB Device: Keyboard Hub, 0x05ac  (Apple Inc.), 0x1005, 0x24300000 / 2
    USB Device: Apple Optical USB Mouse, 0x05ac  (Apple Inc.), 0x0304, 0x24310000 / 5
    USB Device: Apple Keyboard, 0x05ac  (Apple Inc.), 0x021d, 0x24320000 / 4
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8215, 0x06110000 / 4
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x04500000 / 2
    FireWire Device: FreeAgent FW, Seagate, Up to 800 Mb/sec

  • HAL won't start after install on DL585 G2

    I ran a v40z for years and recently had SRSS 5.2 on S11 running just fine. This past week I replaced the v40z with a DL585 G2 and reinstalled S11 and SRSS 5.2. Everything went well except now HAL won't start failing with, I suspect, a timeout after several minutes. Using truss it is clear that devfsadm is going too slow. If I keep restarting HAL and devfsadm over and over, eventually it will start.
    Is there any way to troubleshoot this further?
    Many thanks,
    Marty

    Thanks for the reply.
    I am now kicking myself because I thought I had made a copy of the truss output, but I have not. After 2 hours of tinkering, the machine is finally up and I am hesitant to mess with it any more.
    The truss of devfsadm showed threads of devfsadmd stalling for about 60 seconds over and over again performing an ioctl against a devinfo file. I also wonder if this is related to the following message seen over and over in /var/adm/messages:
    Mar 4 10:05:21 dl585 devfsadmd[595]: [ID 511948 daemon.error] di_init failed for /pci@0,0/pci10de,5c@9/pci103c,3305@4,4/device@1/mouse: No such device or address
    There is some mouse that devfsadm thinks it has but then it can't find it. For what it's worth, there is no mouse plugged into the console. Further, I have disabled ILO via boot ROM and disabled all USB via BIOS.
    Suggestions?
    Thanks again,
    Marty

  • G4 won't start after install?

    Hello, just upgraded my G4 from 10.4.9 to leopard. Installation was successful, but after boot computer won't start. It shuts down right after gray screen shows. Now I started from leopard installation disk and fixed permissions. But that won't work. When I trie to start up from my HD it shuts still down right aftergray screens appeares. My comp spec: G4, 1,4GHz, 2gb ram, geforce2 video.
    Ideas?

    This appears to be another G4 bricking incident. There are plenty of these occurrences on these boards. You must boot from disk (hold "c" during re-start - wait until you see the spinning disc then release the "c" key). Choose disk utility, erase your disk and reinstall from scratch using the same hold "c" method. It's not a pretty solution, but plenty of us have had to figure this out the hard way. Welcome to Leopard.

  • SIA Won't Start After Installing BO XI 3.1 Service Pack 2

    Hi
        We have Business Objects XI 3.1 on Windows 2003 Server after installing Service Pack 2 that took about 7 hours and finish without problems when we try to connect with infoview appear the following message:
    Error: Server mixco15:6400 not found or server may be down (FWM 01003) null
    I check in CMC and SIA appears to be UP but when i try manage servers and put the administrator password i get the following message:
    Unable to log on: Could not connect to server mixco15:6400. Please check that the server name is correct, and the server is running.
    We restart the server several times and the server continues down also stop and start the Service Intelligence Agent and nothing happens do you know if this SP has any problem o what can I do in order to solve this everything was fine after installing SP2.
    Thanks

    the same error..
    in the event viewer nothing about cms.
    but in ccm;
    there is a apache service.
    there is no sia..
    (the installion is xi 3.1 sp3 full)
    windows services: boe120(mysql) >> started..
    any suggestion?

Maybe you are looking for