NCL 2.0 SP2 nautilus problem

Hello,
NCL 2.0 SP2 installed on SLED 11.
Everything works fine: i can login / browse trees and contexts.
But if i click after login in nautilus on "Novell-Services" two new windows are openend.
In the first window i can see my tree, but a double click shows me only an empty content.
In the second window i can see "All Connections" and "Available Connections" but both show me only my already connected servers (connected over Novell client login script).
With NCL 1.x "All Connections" showed me all my NetWare servers which SLP discovered.
Is this a bug or a new feature? How can i display an browse to all my NetWare servers?
Thank you in advance
Andreas

On Tue, 07 Jul 2009 12:08:08 +0000, Andreas Ebert wrote:
> does anybody also have this problem?
I see the same behavior. I've asked Novell if this is a bug or a change
in functionality in the latest client.
Joe Marton
Novell Knowledge Partner
SUSE Linux Enterprise 11 is ready for action.

Similar Messages

  • SP2 Installation Problem on Weblogic Server 6.1SP1

    hi,
    i encountered a problem installing sp2 to my second server.
    (Windows 2000 Advance Server with SP2, dual Xeon CPU, 3GB, 200GB.
    Weblogic Server 6.1 with SP1 installed at d:\bea) x 2
    installation file itself is valid. as installation at server 1 was successful. however,
    when installing at server 2:
    1) by double clicking on the exe - blank GUI popup appeared on screen without any
    usual text (first screen that reads: welcome - the installer will guide you....).
    all three buttons were there. click on the next buttons all the way would give a
    title 'installation complete' without any delay. sp2 was not installed.
    2) by running exe from console - GUI popup appeared normally. however, when prompted
    to select bea home, selecting the default folder at d:\bea and when clicking on next
    button, a popup would appear claiming that weblogic server home is not found at d:\bea.
    and process discontinued.
    the beahomelist is found at c:\bea, with content reading correctly as d:\bea;c:\bea;
    Previous SP1 installation on server 2 about 2 months back was successful.
    would appreciate for ur input. thanks a lot in advance.
    rgds, keigo

    I've exactly the same problem and will attempt to reinstall WebLogic 6.1
    with SP3 built-in ...
    "keigo" <[email protected]> wrote in message
    news:[email protected]..
    >
    update on the progress, spoke to a BEA staff from regional office and I aminformed
    that this problem was never encountered and am advised to perform freshre-installation
    with wlserver6.1 with sp2 built in.
    "keigo" <[email protected]> wrote:
    Hi Laurent,
    Thank you very much for ur reply.
    My Weblogic Server is installed in D:\bea. Just like the Server 1
    configuration.
    And I m choosing to install SP2 into this existing home.
    I am kind of worried by this as it is nearing production and I am running
    into this
    weird problem here.
    Thanks again.
    Rgds, keigo
    Laurent Goldsztejn <[email protected]> wrote:
    Hello Keigo,
    It seems that the problem comes when your server is installed in the
    directory where the beahomelist file is located. Am I correct when I
    assume that the installation fails when you install the service pack 2
    over the server installed in c:\bea?
    Thank you,
    Laurent Goldsztejn
    Developer Relations Engineer
    BEA Support

  • Nautilus problem - FTP transfers hang..

    Hay fellow Archors
    I need some input on a strange issue, what i cant resolve on my own..
    When i connect with Nautilus to an FTP server and tries to copy over a folder to my harddrive the following happens
    It counts "prepares" the tranfer and tell me that there are eg 28 Mb and 5000 files and then the transfering stops. The "file operation" window just hangs..
    I am running Gnome-Shell and i would like your input how to resolve OR debug this problem..
    I have read the wiki and asked google for help, så any ideas would be appiciated.
    jb
    Last edited by jobr (2011-08-08 20:05:44)

    Maybe this is the same problem as  described here https://bbs.archlinux.org/viewtopic.php?id=121191
    Apparently, it seems to be a bigger problem within the handling of ftp with gvfs.
    Actually I use FireFtp for transfering data to or from an ftp server.
    Bay teh way: at the moment, I test KDE 4.7 a little bit. With the Dolphin file manager, copying files via ftp seem to work without any problems.

  • Nautilus problem

    Hey all,
    I run fluxbox as my WM but I use nautilus for my file browser. It used to all work fine but I did a reinstall a while ago for no particular reason and I can't remember when it started but now after I boot nautilus will load once for each user and thats it. After that, nothing. I tried launching it from the console and got no errors just nothing happened but this time I got this, anyone know how I can fix it?
    [cam@sylvester ~]$ nautilus --no-desktop
    *** glibc detected *** nautilus: realloc(): invalid next size: 0x0827fb88 ***
    I don't really  want to use ROX, it doesn't turn me  on. If I could get nautilus fixed I'd be stoked. Yes I've tried reinstalling it, and the whole of gnome  but with no luck. After some experimenting as root it lasts quite a bit longer. I can open/close it maybe 10 times before it refuses to open again...
    Thanks for any ideas:)

    Maybe this is the same problem as  described here https://bbs.archlinux.org/viewtopic.php?id=121191
    Apparently, it seems to be a bigger problem within the handling of ftp with gvfs.
    Actually I use FireFtp for transfering data to or from an ftp server.
    Bay teh way: at the moment, I test KDE 4.7 a little bit. With the Dolphin file manager, copying files via ftp seem to work without any problems.

  • WLS 7.0 sp2 - Servlet Problems with SOAP messages

              I'm using Weblogic 7.0 SP2 and trying to create a Servlet to receive SOAP wrapped
              XML messages. I'm getting the following error. Is this a problem with WLS7.0sp2's
              support of JAXM? The System.out.println's indicate I have successfully received
              the incoming SOAP request and then successfully formatted the SOAP response, but
              upon returning saving the response it appears to blow up. Does anyone have any
              suggestions?
              I need to do the following in a servlet:
              - receive an incoming SOAP request with an embedded XML message
              - perform some processing
              - return a SOAP response with an embedded XML message
              Should I be using JAXM? Or can I do this same task easily with JAX-RPC?
              <Feb 24, 2004 4:10:42 PM AST> <Error> <HTTP> <101017> <[ServletContext(id=260434
              7,name=isd.war,context-path=)] Root cause of ServletException
              java.lang.Error: NYI
              at weblogic.webservice.core.soap.SOAPMessageImpl.saveRequired(SOAPMessag
              eImpl.java:360)
              at javax.xml.messaging.JAXMServlet.doPost(Unknown Source)
              at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
              at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
              at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
              (ServletStubImpl.java:1058)
              at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
              pl.java:401)
              at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
              pl.java:306)
              at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
              n.run(WebAppServletContext.java:5445)
              at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
              eManager.java:780)
              at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
              rvletContext.java:3105)
              at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
              pl.java:2588)
              at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
              at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
              >
              I've stripped the code down so that all it does is verifies the incoming SOAP/XML
              request and creates a hard-coded response... be gentle... I'm a novice at this
              import javax.xml.soap.*;
              import javax.servlet.*;
              import javax.servlet.http.*;
              // import javax.xml.transform.*;
              import java.util.*;
              import java.io.*;
              public class RegisterServlet extends HttpServlet
              static MessageFactory fac = null;
              static
              try
              fac = MessageFactory.newInstance();
              catch (Exception ex)
              ex.printStackTrace();
              public void init(ServletConfig servletConfig) throws ServletException
              super.init(servletConfig);
              public void doPost(HttpServletRequest req, HttpServletResponse resp) throws ServletException,
              IOException
              try
              System.out.println("** Note: doPost() Entering req = " + req);
              // Get all the headers from the HTTP request
              MimeHeaders headers = getHeaders(req);
              // Get the body of the HTTP request
              InputStream is = req.getInputStream();
              // Now internalize the contents of a HTTP request
              // and create a SOAPMessage
              SOAPMessage msg = fac.createMessage(headers, is);
              System.out.println("** Note: doPost() Step A");
              SOAPMessage reply = null;
              reply = onMessage(msg);
              System.out.println("** Note: doPost() Step B reply = " + reply);
              if (reply != null)
              * Need to call saveChanges because we're
              * going to use the MimeHeaders to set HTTP
              * response information. These MimeHeaders
              * are generated as part of the save.
              if (reply.saveRequired())
              System.out.println("** Note: doPost() Step C reply.saveRequired()");
              reply.saveChanges();
              resp.setStatus(HttpServletResponse.SC_OK);
              putHeaders(reply.getMimeHeaders(), resp);
              // Write out the message on the response stream
              OutputStream os = resp.getOutputStream();
              System.out.println("** Note: doPost() Step D os = " + os);
              reply.writeTo(os);
              os.flush();
              else
              resp.setStatus(HttpServletResponse.SC_NO_CONTENT);
              catch (Exception ex)
              throw new ServletException("** Error: SAAJ POST failed: " + ex.getMessage());
              static MimeHeaders getHeaders(HttpServletRequest req)
              Enumeration enum = req.getHeaderNames();
              MimeHeaders headers = new MimeHeaders();
              while (enum.hasMoreElements())
              String headerName = (String)enum.nextElement();
              String headerValue = req.getHeader(headerName);
              StringTokenizer values =
              new StringTokenizer(headerValue, ",");
              while (values.hasMoreTokens())
              headers.addHeader(headerName,
              values.nextToken().trim());
              return headers;
              static void putHeaders(MimeHeaders headers, HttpServletResponse res)
              Iterator it = headers.getAllHeaders();
              while (it.hasNext())
              MimeHeader header = (MimeHeader)it.next();
              String[] values = headers.getHeader(header.getName());
              if (values.length == 1)
              res.setHeader(header.getName(),
              header.getValue());
              else
              StringBuffer concat = new StringBuffer();
              int i = 0;
              while (i < values.length)
              if (i != 0)
              concat.append(',');
              concat.append(values[i++]);
              res.setHeader(header.getName(), concat.toString());
              // This is the application code for handling the message.
              public SOAPMessage onMessage(SOAPMessage message)
              SOAPMessage replymsg = null;
              try
              System.out.println("** Note: OnMessage() Entering msg = " + message);
              //Extract the ComputerPart element from request message and add to reply SOAP
              message.
              SOAPEnvelope reqse = message.getSOAPPart().getEnvelope();
              SOAPBody reqsb = reqse.getBody();
              //System.out.println("** Note: OnMessage() Step B");
              System.out.println("** Note: OnMessage () Step A Soap Request Message Body = "
              + reqsb);
              //Create a reply mesage from the msgFactory of JAXMServlet
              System.out.println("** Note: OnMessage () Step B");
              replymsg = fac.createMessage();
              SOAPPart sp = replymsg.getSOAPPart();
              SOAPEnvelope se = sp.getEnvelope();
              SOAPBody sb = se.getBody();
              System.out.println("** Note: OnMessage () Step C Soap Reply Before Message Body
              = " + sb);
              se.getBody().addBodyElement(se.createName("RegisterResponse")).addChildElement(se.createName("ErrorCode")).addTextNode("000");
              System.out.println("** Note: OnMessage () Step D Soap Reply After Message Body
              = " + sb);
              replymsg.saveChanges();
              System.out.println("** Note: OnMessage() Exiting replymsg = " + (replymsg));
              catch (Exception ex)
              ex.printStackTrace();
              return replymsg;
              

    Michael,
    I got the same error on WLS8.1/Win2K professional and apache FOP (old version).
    After digging into the WLS code and FOP(old version). i found the conflict happens
    on
    the "org.xml.sax.parser" system property. In WLS code, they hard coded like the
    following when startup weblogic server:
    System.setProperty("org.xml.sax.parser", "weblogic.xml.jaxp.RegistryParser");
    But the FOP code try to use the "org.xml.sax.parser" system property to find the
    sax parser then conlict happens.
    Here is the response from BEA support :
    "I consulted with our developers regarding the question of whether we can change
    the hard-coded value for the java system property: org.xml.sax.parser by using
    a configuration parameter and I found that unfortunately there is no specific
    setting to change the value. As you had mentioned in your note the org.xml.sax.parser
    system property can be changed programmatically in your application code."
    I solve my problem by using newer apache FOP (it never use the system property:org.xml.sax.parser
    any more) and XML Registy for WLS8.1.
    Good luck.
    David Liu
    Point2 Technologies Inc.
    "p_michael" <[email protected]> wrote:
    >
    Help.
    When we migrated from WLS 6.1 to WLS 7.0 SP2 when encountered a problem
    with XML
    parsing that did not previously exist.
    We get the error "weblogic.xml.jaxp.RegistryParser is not a SAX driver".
    What does this mean? And, what should we do about it.
    p_michael

  • Web Logic 8.1 SP2 Plugin Problems

    Hi
    I have a problem with configuring the WebLogic 8.1 SP2 Plugin (libproxy.so) for
    IPlanet Web Server (Sun One Web Proxy Server SP3).
    Once I configure the plugin the web server instance fails to start with the following
    error message:
    "[13/Jul/2004:10:40:44] failure: regex error: repetition-operator operand invalid
    (regex: '^*/weblogic/*$')
    [13/Jul/2004:10:40:45] info: LdapCheckUp set to 30 seconds
    conf_init: line 25: dlopen of /usr/netscape/suitespot/lib/libproxy.so failed (ld.so.1:
    ./ns-proxy: fatal: relocation error: file /usr/netscape/suitespot/lib/libproxy.so:
    symbol _ex_keylock: referenced symbol not found)"
    My current environment setting for LD_LIBRARY_PATH includes the libC.so.5 which
    holds the definition of the exkeylock to no avail.
    I have added the following config for the plugin in the obj.conf file:
    Init fn="load-modules" funcs="wl_proxy,wl_init"\ shlib=/usr/netscape/suitespot/lib/libproxy.so
    Init fn="wl_init"
    <Object name="weblogic" ppath="*/weblogic/*">
    Service fn=wl_proxy WebLogicHost=XX.XX.XX.XX WebLogicPort=7001\ PathTrim="/weblogic"
    </Object>
    Any ideas what could be causing this problem??

    Hi
    I have a problem with configuring the WebLogic 8.1 SP2 Plugin (libproxy.so) for
    IPlanet Web Server (Sun One Web Proxy Server SP3).
    Once I configure the plugin the web server instance fails to start with the following
    error message:
    "[13/Jul/2004:10:40:44] failure: regex error: repetition-operator operand invalid
    (regex: '^*/weblogic/*$')
    [13/Jul/2004:10:40:45] info: LdapCheckUp set to 30 seconds
    conf_init: line 25: dlopen of /usr/netscape/suitespot/lib/libproxy.so failed (ld.so.1:
    ./ns-proxy: fatal: relocation error: file /usr/netscape/suitespot/lib/libproxy.so:
    symbol _ex_keylock: referenced symbol not found)"
    My current environment setting for LD_LIBRARY_PATH includes the libC.so.5 which
    holds the definition of the exkeylock to no avail.
    I have added the following config for the plugin in the obj.conf file:
    Init fn="load-modules" funcs="wl_proxy,wl_init"\ shlib=/usr/netscape/suitespot/lib/libproxy.so
    Init fn="wl_init"
    <Object name="weblogic" ppath="*/weblogic/*">
    Service fn=wl_proxy WebLogicHost=XX.XX.XX.XX WebLogicPort=7001\ PathTrim="/weblogic"
    </Object>
    Any ideas what could be causing this problem??

  • BOBJ Edge BI 3.1 SP2 - installation Problem

    Hello everybody,
    after installation of BOBJ Edge BI 3.1 SP2 (Windows Server) for Server Components the BO Central Management Console is not working. The logon is not possible. There comes the error message:
    HTTP Status 404 - /PartnerPlatformService/service/app/logo
    type Status report
    message /PartnerPlatformService/service/app/logon.do
    description The reguested resource
    (/PartnerPlatformService/service/app/logon.do) is not available.
    the Option: "Automatically Re-Deploy Web Applications?" was activated while installinf the SP2
    What shold I do to get access to CMC?
    Thanks in advance for any help!
    regards,
    Agi

    Hi Stratos,
    Yes to both questions.
    Tomcat 5.5.20, SAP INT KIT 3.1
    We already have a BO System 3.1 with FP1.2 running. There was no problem with the FP1.2  (except the duration of the install process)
    Now we install SP2 directly on top of another EDGE 3.1 system but as you can see the web apps doesnu2019t work
    Is there someone out there using EDGE 3.1 SP2 already?
    Any respond will be greatly appreciated
    Regards
    Agi

  • SB Live with XP Pro (SP2) causes problems with no sou

    Ok, my computer rs relativley "old". It's a gateway from about... 2000, with a Pentium IV, .3 Ghrz, NVIDIA GeForce2 MX/MX 400 video card, and I'm not sure exactly what sound card it is, I think it's SB Li've! 24-bit... or whatever came standard with these gateways from back then. Now, for some reason, after I reformatted my comp and put XP pro with SP2 on there, SB Li've doesn't work. It worked fine on XP pro without SP2 (except for the devldr32.exe thing, but I fixed that). I put the CD in, say to install it fully, then a message comes up saying that there is no CD... after auto-playing off of it! So I hit continue and the message popped right back up, so I hit cancel and it continued with the installation. I chose to restart the comp now, and I heard the sound of windows logging off, so I assumed it was working. But then when it came back on, my taskbar wouldn't some up all of the way and there was no sound. I right-clicked on the taskbar and chose to view quick launch and it popped up, but I couldn't adjust the length of the quicklaunch section, even when i unlocked it, the right border thing wasn't there. It is very irritating and I couldn't find any drivers that would help this. Anyone know what's wrong? I would e-mail for support, but I highly doubt the warranty is still good. I would be EXTREMELY thankful for anyone who could even lead me in the right direction. Thank you.

    And, you can be certain it's not a Li've! 24-bit. They didn't make them back then! It's either a Li've! 5. (probable) or a Li've! 4. (unlikely if the computer was really manufactured in 2000).
    You can try removing anything that was possibly added by your using the cd, then letting XP install its nati've driver for it. I would download DriverCleaner from driverheaven.net. If there's nothing in Add/Remove Programs (as there probably isn't if your attempt to install the cd version of the driver (provided by Gateway?) failed before finishing), then go into device manager and remove anything related to the card and reboot to Safe Mode and run DriverCleaner. Delete the Creative Folder in Program Files that your cd probably made. Reboot and let XP install its driver. Reboot again.
    That's probably the best your going to get if Gateway didn't update the Creative software for SP2. You could attempt to install the Li've Uni-Pack stuff from the download section here, but it might or might not work on the OEM card you have. If the software on your Gateway/Creative cd had problems then your probably going to just be able to use the nati've Windows XP driver. You will still be able to adjust your settings with the Windows audio controls, but won't be able to use Creative software.
    You would need to contact Gateway to see if they really don't have a package for this. Did you check their website for updates for your model?

  • Exchange 2010 SP2: Different problems with E_ACCESSDENIED on exchange servers

    Hello All,
    I'm observing a strange problem in an AD 2008 R2 / Exchange 2010 SP2 environment:
    When creating a DAG and adding 1 or more servers to the DAG, the following error occurs:
    Summary: 2 item(s). 0 succeeded, 2 failed.
    Elapsed time: 00:00:05
    <MAILBOX SERVER 1> Failed
    Error:
    Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
    Exchange Management Shell command attempted:
    Add-DatabaseAvailabilityGroupServer -MailboxServer '<MAILBOX SERVER 1>' -Identity '<NAME DAG>'
    Elapsed Time: 00:00:02
    <MAILBOX SERVER 2> Failed
    Error:
    Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
    Exchange Management Shell command attempted:
    Add-DatabaseAvailabilityGroupServer -MailboxServer '<MAILBOX SERVER 2>' -Identity '<NAME DAG>'
    Elapsed Time: 00:00:02
    There are no logs created on the Mailservers, so I have no more detailed information. Where to start with troubleshooting this issue?
    Edit: BTW I already checked the local admin membership of the "Exchange Trusted Subsystem" domain group.
    Also commands like get-owavirtualdirectory give the Access Denied error (except on the CAS servers themselves).
    You know you're an engineer when you have no life and can prove it mathematically

    Hi Frank,
    The DAG is not yet populated. When inserting the first server(s) in the freshly created DAG, the error appeared.
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\Scripts>Get-DatabaseAvailabilityGroup
    Name             Member Servers                                     
    Operational Servers
    IICT-DAG-002     {}
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\Scripts>Get-DatabaseAvailabilityGroup IICT-DAG-002 -Status | fl
    RunspaceId                             : cc985264-fa89-48f8-8aba-c1b0c89eb097
    Name                                   : IICT-DAG-002
    Servers                                : {}
    WitnessServer                          : iict-srvp00-011.insourceict.local
    WitnessDirectory                       : C:\IICT-DAG-002
    AlternateWitnessServer                 :
    AlternateWitnessDirectory              :
    NetworkCompression                     : InterSubnetOnly
    NetworkEncryption                      : InterSubnetOnly
    DatacenterActivationMode               : Off
    StoppedMailboxServers                  : {}
    StartedMailboxServers                  : {}
    DatabaseAvailabilityGroupIpv4Addresses : {10.100.0.54}
    DatabaseAvailabilityGroupIpAddresses   : {10.100.0.54}
    AllowCrossSiteRpcClientAccess          : False
    OperationalServers                     :
    PrimaryActiveManager                   :
    ServersInMaintenance                   :
    ThirdPartyReplication                  : Disabled
    ReplicationPort                        : 0
    NetworkNames                           : {}
    WitnessShareInUse                      :
    AdminDisplayName                       :
    ExchangeVersion                        : 0.10 (14.0.100.0)
    DistinguishedName                      : CN=IICT-DAG-002,CN=Database Availability Groups,CN=Exchange Administrative Gro
                                             up (FYDIBOHF23SPDLT),CN=Administrative
    Groups,CN=InsourceICT,CN=Microsoft Exch
                                             ange,CN=Services,CN=Configuration,DC=insourceict,DC=local
    Identity                               : IICT-DAG-002
    Guid                                   : 71d5d869-03ac-4f8a-8de7-fc15bc6a0ae1
    ObjectCategory                         : insourceict.local/Configuration/Schema/ms-Exch-MDB-Availability-Group
    ObjectClass                            : {top, msExchMDBAvailabilityGroup}
    WhenChanged                            : 8-6-2012 14:35:59
    WhenCreated                            : 8-6-2012 13:35:21
    WhenChangedUTC                         : 8-6-2012 12:35:59
    WhenCreatedUTC                         : 8-6-2012 11:35:21
    OrganizationId                         :
    OriginatingServer                      : IICT-SRV003.insourceict.local
    IsValid                                : True
    You know you're an engineer when you have no life and can prove it mathematically

  • Weblogic 8.1 SP2 + Sybase: Problem with Insufficient Procedure Cache Memory

    Hi all,
    Our Weblogic server(8.1, SP2) encountered a problem this week.
    It connects to Sybase.
    For a particular database query (which involves temporary tables), the DB seems to have run out of "Procedure Cache memory". And as a result, has thrown an exception.
    What is a bit wierd is that, the Weblogic, slowly, seems to have exhausted all its DB resources, and all the subsequent database queries (even the simple ones) have failed due to some error or the other.
    The weblogic required a re-start for it to acquire back its DB resources.
    Has somebody faced a similar problem before, please?
    On reading the Release Notes for WLS: 8.1, I see that the Service Packs SP4, SP5 seem to have a few bug fixes related to memory leaks (especially, in case a Prepared statement failed).
    [Related CRs are CR233948, CR179600, CR183190].
    Does this mean that an Upgrade to 8.1: SP5 or maybe even SP6 help, please?
    Would welcome any kind of advice/suggestions.
    Thanks you!!!!
    Rhishi.

    Rhishikesh Anandamoorthy wrote:
    Hi Joe,
    Thanks a lot for your reply.
    I should have mentioned in my previous post that the DBA had indeed recommended
    an increase to the Sybase's Procedure Cache Memory size. (We have a separate
    DBA team out here, and I do not have DBA access to my database).
    But I am a bit apprehensive on two counts:
    1. From the DB logs, I see that the query which seems to have failed is something
    which is fired day in and day out (though this involves the usage of temporary tables,
    which might have filled up the Cache). I should also add that the "DB statistics" was
    also being run (automatically) about the same time when the query failed. But again,
    the "DB statistics" is run everyday. So, cant see much of a problem here.Nevertheless, it is an internal DBMS issue.
    2. The CR179600 and CR183190 of the Weblogic Release Notes suggests that: "Under
    certain statement failure conditions, cached statements are leaked without being
    closed, which can lead to DBMS resource problems."
    So, I am just wondering if this is indeed the actual cause. If so, it might mean
    that there is a chance, though slight, that the problem might re-occur.
    There seems to be a fix for this in SP5.I certainly advocate upgrading to 81sp6, but that issue had to do with Oracle,
    which retains DBMS 'cursors' for each open prepared statement. This will have
    no effect on a Sybase DBMS.
    I can certainly upgrade to SP6. But, the application seems to have been pretty
    stable with SP2 for the past 4 years.
    I understand that an upgrade to SP6 may not be such a big change. But, it would
    still be a change.
    And the webapp which the server supports is very critical to our customer
    [which webapp is not? :-) ], and a server-restart again for this issue would
    certainly not be acceptable.
    So, would want to be doubly sure, if an upgrade is indeed the right way out.
    Thank you!!!
    Rhishi.In that case, I would stay comfortable with SP2 if you like. In my professional
    opinion, at this time, it is a purely DBMS-side issue, based on the current
    evidence. Note that the same WLS was fine for these same previous years. The
    problem may have to do with a gradual or recent change in the load or size of
    the DBMS.
    Joe Weinstein at BEA Systems ( nee [email protected] 1988-1996 )

  • I have xp sp1; i went to FoxFire b/c i cannot up date to sp2. (comp problem). now i can't update to FireFox 13 b/c it requires sp2. now what?

    i cannot update my windows sp1 b/c of unrelated comp issues. its just not compatible with my comp. so i tried FoxFire...a few of my friends recommended it. i have been using it now for awhile and i like it a lot. i don't even use IE anymore. the new update for FoxFire (13) required me to have sp2 in my comp! well....i can't!!!! so now what??????????? will i not be able to get FoxFire in the near future?
    come on.....this is just great!!!!!!!!!!!! ya know all of us are not so lucky as to have everything perfect in our lives and comp.....i can't be the only one out here with this problem....can't you include us too???????????? please can someone from FoxFire get back to me and tell me what to expect if i keep just FoxFire 12?
    ''[Personal information removed by moderator. Please read [[Forum and chat rules and guidelines]], thanks.]''

    Firefox 12 will not delete itself from your computer, at least I don't think it will, so you will have it for a while. Make sure to turn off automatic updating.
    Regarding your hard drive, I wonder whether a tool like Partition Master could swap things around successfully? I've never used it for anything drastic, so maybe ask around on some forums for guidance. http://www.partition-tool.com/personal.htm

  • MSI K8N Neo2-FX - WinXP-sp2 USB problem

    HI!
    Two weeks ago I Bought this mainboard, and I can't install the Usb2 driver.
    I have Windows XP with service pack 2, and it doesn't recognize the Usb ports as Usb2.
    On the driver disc which were provided with the mainboard there were a driver, but only for the English version of WinXP-sp1.
    My question is: Where can I get the drivers I need, or what did I wrong?
    I downloaded all the stuff from this homepage, but these doesn't contain the %!!/@^ Usb drivers                 
    Pleeeeeeeese help!

    Well, the problem is still on.
    1) I read carefully the Instruction manual, and it says that there is no mistake, I REALLY have usb 2.0 ports. (8 pieces to be precise)
    2) In the BIOS I didn't find that option you mentioned.
      There are three options related to the Usb:
      a) Onchip Usb (enabled/disabled)
      b) USB kb/storeage support (enabled/disabled)
      c) USB Mouse support (enabled/disabled)
    I tried all the possible combination, but when i connect my pendrive to the computer it says (I don't know what the english Windows say, but I try to translate): This device is capable work faster, if you attach it to an USB2.0 port. (instead of saying "High speed USB Device is connected to a slower port", which appaers when using USB1.1 ports on an other comp.)
    What can you suggest????
    (I have sp2 with latest drivers possible)

  • Crystal Reports 2008 sp2 PrinterDuplex problem

    All,
    I'm working on a .NET 3.5 application (upgrade from 2.0) with Crystal Reports in it.
    Since we just upgraded the code from 2.0 to 3.5, I thought it would be intresting to also upgrade from Crystal Reports 2005 to Crystal Reports 2008.
    This transition worked flawlessly, except for 1 thing which I can not wrap my head around: I am unable to change the PrinterDuplex in the report.PrinterSettings since the upgrade !!
    report.PrintOptions.PrinterDuplex = CrystalDecisions.Shared.PrinterDuplex.Horizontal; // does not work anymore
    Message: COMException: {"Invalid index. (Exception from HRESULT: 0x8002000B (DISP_E_BADINDEX))"}
    Source: "CrystalDecisions.ReportAppServer.Controllers"
    Stacktrace: "   at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.ModifyPrintOptions
    (PrintOptions newVal)\r\n   at CrystalDecisions.CrystalReports.Engine.PrintOptions.set_PrinterDuplex
    (PrinterDuplex value)\r\n   at Gui.Reporting.ReportPrinter.PrintOnly (ReportInfo info, IList`1 paramValues, Int32 nCopies) in C:
    data\ \tcm_1.0
    Generation
    TCM
    src
    Gui
    Reporting
    ReportPrinter.cs:line 91"
    Anybody here who had the same problem or knows where I could find an answer or what I'm doing wrong ?
    cheers and thanks in advance,
    Andy

    Just did a quick test on it. Works for me fine. Using CR 2008 SP 2.
    If you do not have SP 2, it is available from here:
    https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
    Ludek

  • BEA WLS 6.1 SP2: Deploy problems (JDBCConnectionPool/JDBCTxDataSource)

    Hello anybody,
    learnt XA being necessary if more than one sql command in transaction, so I changed
    my entries to the following:
    <JDBCConnectionPool
    DriverName="oracle.jdbc.xa.client.OracleXADataSource"
    Name="OracleDB"
    Password="{3DES}iKOCmvzSc6g="
    Properties="user=osv"
    Targets="osvServer"
    TestConnectionsOnReserve="false"
    URL="jdbc:oracle:thin:@pegnitz:1526:ora1"/>
    <JDBCTxDataSource
    JNDIName="JNDINameOracleOSV-DB"
    Name="OracleDataSource"
    PoolName="OracleDB"
    Targets="osvServer"/>
    We set up on a database ORACLE 8.3.2.
    Now, with the non-XA-driver there was no deployment problem, but now I receive the
    following error message on the server output:
    Unable to deploy EJB: CourseDateEJB from osv.jar:
    The Container-Managed Persistence Entity EJB failed while creating its SQL Type Map.
    The error was:
    XA error: XAER_RMERR : A resource manager error has occured in the transaction branch
    start() failed on resource 'OracleDB' Unexpected error during start for XAResource
    'OracleDB': null
         at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:1019)
         at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:30)
         at weblogic.j2ee.Application.deploy(Application.java:247)
         at weblogic.j2ee.J2EEService.deployApplication(J2EEService.java:185)
         at weblogic.management.mbeans.custom.Application.setLocalDeployed(Application.java:362)
         at weblogic.management.mbeans.custom.Application.setDeployed(Application.java:296)
         at java.lang.reflect.Method.invoke(Native Method)
         at weblogic.management.internal.DynamicMBeanImpl.invokeSetter(DynamicMBeanImpl.java:1388)
         at weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:881)
         at weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:847)
         at weblogic.management.internal.ConfigurationMBeanImpl.setAttribute(ConfigurationMBeanImpl.java:295)
         at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1356)
         at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1331)
         at weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:392)
         at weblogic.management.internal.ConfigurationMBeanImpl.setAttribute(ConfigurationMBeanImpl.java:298)
         at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1356)
         at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1331)
         at weblogic.management.internal.RemoteMBeanServerImpl_WLSkel.invoke(Unknown Source)
         at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
         at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
         at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    Many thanks if s.b. could help me.
    Klaus

    Hi Klaus,
    if you want to implement a global transaction over two different JDBC Resource Managers
    (update on both + 2PC) they have to be both XA compliant.
    Or you could have only one of them XA compliant(i.e: one 8.1.6 or higher Oracle instance):
    for the other one (i.e.: one 7.3.2 Oracle instance) you could use a non XA-driver
    and configuring a TXDataSource with "enable two-phase commit" = true (but only one
    non-XA JDBC driver at a time can participate in a distributed transaction).
    Well, XA transactions are not a pre-requisite for EJB: you could use simple "local"
    transactions or distributed transactions without XA drivers as well (using a single
    resource manager).
    But if you want to update multiple resource managers in the same transaction using
    EJBs, this is a "global" transaction, and WL server fully supports it.
    But the partecipants must be XA compliant to be able to "talk" to WL coordinator.
    Sergi
    Sergi
    "Klaus Dirlewanger" <[email protected]> wrote:
    >
    Hi Sergi, hello world,
    thanks a lot for this message. So the conclusion is that I hava no chance
    at all
    to use this oracle version (7.3.2) with BEA WLS (or more common EJB), cause
    a prerequisite
    for EJB are XA-transactions.
    Is this conclusion correct.
    Many thanks again
    Klaus
    "Sergi Vaz" <[email protected]> wrote:
    Hi Klaus,
    distributed transaction (XA) features require version
    Oracle8i release 8.1.6 or later of the Oracle server.
    Sergi
    "Klaus Dirlewanger" <[email protected]> wrote:
    Hi Sergi,
    1.) sorry, that was a typing error with the oracle version, I meant 7.3.2.
    2.) I didn´t use a special driver but that that was delivered with thewls
    server
    in the package "weblogic.jar".
    Could I enable you helping me with this information?
    Best wishes
    Klaus
    "Sergi Vaz" <[email protected]> wrote:
    Hi Klaus,
    which
    1) Oracle server version (I don't think it's a 8.3.2.)
    2) Oracle JDBC driver version
    are you you using ?
    Sergi
    "Klaus Dirlewanger" <[email protected]> wrote:
    Hello anybody,
    learnt XA being necessary if more than one sql command in transaction,so
    I changed
    my entries to the following:
    <JDBCConnectionPool
    DriverName="oracle.jdbc.xa.client.OracleXADataSource"
    Name="OracleDB"
    Password="{3DES}iKOCmvzSc6g="
    Properties="user=osv"
    Targets="osvServer"
    TestConnectionsOnReserve="false"
    URL="jdbc:oracle:thin:@pegnitz:1526:ora1"/>
    <JDBCTxDataSource
    JNDIName="JNDINameOracleOSV-DB"
    Name="OracleDataSource"
    PoolName="OracleDB"
    Targets="osvServer"/>
    We set up on a database ORACLE 8.3.2.
    Now, with the non-XA-driver there was no deployment problem, but now
    I
    receive
    the
    following error message on the server output:
    Unable to deploy EJB: CourseDateEJB from osv.jar:
    The Container-Managed Persistence Entity EJB failed while creating itsSQL
    Type Map.
    The error was:
    XA error: XAER_RMERR : A resource manager error has occured in the transaction
    branch
    start() failed on resource 'OracleDB' Unexpected error during start
    for
    XAResource
    'OracleDB': null
         at weblogic.ejb20.deployer.Deployer.deploy(Deployer.java:1019)
         at weblogic.j2ee.EJBComponent.deploy(EJBComponent.java:30)
         at weblogic.j2ee.Application.deploy(Application.java:247)
         at weblogic.j2ee.J2EEService.deployApplication(J2EEService.java:185)
         at weblogic.management.mbeans.custom.Application.setLocalDeployed(Application.java:362)
         at weblogic.management.mbeans.custom.Application.setDeployed(Application.java:296)
         at java.lang.reflect.Method.invoke(Native Method)
         at weblogic.management.internal.DynamicMBeanImpl.invokeSetter(DynamicMBeanImpl.java:1388)
         at weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:881)
         at weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:847)
         at weblogic.management.internal.ConfigurationMBeanImpl.setAttribute(ConfigurationMBeanImpl.java:295)
         at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1356)
         at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1331)
         at weblogic.management.internal.ConfigurationMBeanImpl.updateConfigMBeans(ConfigurationMBeanImpl.java:392)
         at weblogic.management.internal.ConfigurationMBeanImpl.setAttribute(ConfigurationMBeanImpl.java:298)
         at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1356)
         at com.sun.management.jmx.MBeanServerImpl.setAttribute(MBeanServerImpl.java:1331)
         at weblogic.management.internal.RemoteMBeanServerImpl_WLSkel.invoke(Unknown
    Source)
         at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:298)
         at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:267)
         at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:22)
         at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
         at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    Many thanks if s.b. could help me.
    Klaus

  • Hyper-V VM Windows Server 2003 R2 SP2 Network Problems

    Hi Guys,
    I am trying to setup a new VM in my lab (I am using windows 8.1 in my host)  with Windows Server 2003 R2 SP2. I already installed the integration services in that VM, the network adapter is ok (Hyper-V network adapter). Well, everything it seems to be
    ok, but my W2K3 Machine keeps getting 169.xxx ip. My host is wireless , the virtual switch is ok, since I have other 4 VM (W2K8, W2K8R2, W2012, W2012R2) working fine with that switch and having access to the internet, just this VM with W2K3 is not working. 
    Do you guys can help ?
    Thanks

    Please check the properties of your NIC adapter in W2K3 if the Client for Microsoft Network is installed.
    And also try to compare the network setting for other VMs NICs in Hyper-V to find the deference.
    I would create new VM and install clean W2K3 for testing.
    If you found this post helpful, please give it a "Helpful" vote. If it answered your question, remember to mark it as an "Answer". This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY
    suggestion in a test environment before implementing!

Maybe you are looking for

  • Suggestion for a possible iphone with slide out keyboard.

    I dont really know if there is a suggestion forum but i thought it would be neat if apple designed a iphone with a physical keyboard for those people who love to text. Apple could even run a internet pole to see what there customers would think i mea

  • Connecting Macbook Pro to Dell1704FPT

    Hi- I have a brand new Macbook Pro I'm trying to connect to a Dell1704FPT monitor.  I'm using a Mini DisplayPort to VGA adapter.  When I plug the adapter in, my Macbook recognizes the monitor but the monitor doesn't recognize my Mac.  The monitor has

  • Attach external documents to SAP

    Hi we are planning to attach external documents to purchase order in ME22N screen. & every month 10gb files I would like to know the below points do we have any limitation for attachment? what potential risks are involved using this functionality? Wi

  • Manual Check Deposit

    I have done with all settings of Bank Accounting; Created House Bank Created Check Deposit Account Crated Account Symbols and assigned GL accounts Created Keys and defined Posting Rules Created and Assigned Business Transactions Defined Variant for M

  • How can i send emails from forms

    I need to be able to send emails from forms 6.(assuming the pc is running Outlook) What is the best way of doing this? Would OLE or DDE control of Outlook be the easiest method? If anyone has done this please let me know.