NCM related config on the 3750x??

Hi,
I know this has come end of sale now. but there is an existing setup where some switches need to be added so the NCM can monitor them.
I have never worked on the NCM before so wasn't sure what needs to be done on the switches and/or on the NCM server to make that happen.
Is there a doc which explains that all?? I tried but couldnt find it.
thanks in advance!
regards,
mohit

The end user guide is on the NCM product support page and shows the steps for adding devices.
However you may need to have your NCM system updated to the IDU from March 2013. It looks like the 3750X support was added with that one per the compatibility table.

Similar Messages

Want to set mailto for google apps;tried editing the gecko...mailto.2.uritemplate as per instructions found on web; set 3 related config values to "true" as per instructions; does not work; tried javascript method without success

I want to set the mailto app for google apps gmail.
I tried editing the gecko...mailto.2.uritemplate as per instructions found on web (https://mail.google.com/a/MYDOMAIN/mail/?extsrc=mailto&url=%s.
Set 3 related config values to "true" as per instructions (network.protocol-handler.expose.mailto ; network.protocol-handler.warn-external.mailto ; AND, third, gecko.handlerService.allowRegisterFromDifferentHost.
Does not work, no Google Apps in the mailto app spot.
Tried javascript method in address bar without success:
javascript:window.navigator.registerProtocolHandler("mailto","https://mail.google.com/a/MYDOMAIN/mail/?extsrc=mailto&url=%s","Google Apps GMail")
Any light anyone can shed will be appreciated. Cheers, jlf

Great howto Steve! This further increased my understanding of the MVC patterns used by BC4J.
Some remarks:
[*]Select New Business Components...
This should be 'New Business Components Package', or you won't be able to add business components.
ename as "Name",
sal as "Salary"
from emp
where empno = ?That should be deptno.
[*]Select the EditEmpsInDepartment view objectThat should be EmpsInDepartment.
Greetings,
Ivo

Firefox will open 4 or 5 tabs fine, but then will not load any further websites after those first 4 or 5, or allow you to refresh one of those first tabs -- including about:config and the addon page

Firefox 5 worked fine. I installed Firefox 7, and when I ran it, tabs would just say "connecting to..." and hang. Restarting did not help. Websites open fine in IE and Chrome. Disabled all firewalls and antivirus, did not help. Uninstalled and reinstalled Firefox 5, everything worked fine again. This was using Vista 64-bit.
Upgraded to Windows 7, uninstalled Firefox 5, installed Firefox 7, had same problem. Uninstalled Firefox 7 completely (including the profile information, I saved that information in another folder), restarted computer, and installed Firefox 7 using a completely clean profile. Did not install any add-ons, checked to make sure all plug-ins were up-to-date, and updated plugins.
Now when I start Firefox, I can load 3 or 4 or 5 tabs fine -- after those first few tabs are open, I cannot open or refresh any other tabs -- including about:config and the add-on manager -- I have to restart Firefox. The hangup doesn't appear to be related to what websites I am attempting to open, but it looks like the number is the problem. I have run through all of the FAQ procedures, including changing the max number of network connections to 48, and the problem does not seem to go away.
As a side note, I had this same problem when I tried to go from version 5 to version 6 as well. Version 5 is the most recent version that worked on my system.

Can you try Aurora - download it from http://www.mozilla.org/en-US/firefox/channel/
And let us know how it works.

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

Errors in the high-level relational engine. The data source view does not contain a definition for the table or view. The Source property may not have been set.

Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
Thanks

Hi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support

I am trying to get the most speed out of the browser, instructions say to type about:config in the address bar and hit enter, I did this. It now says to rt. click, from the menu select "New" then "Integer", I cannot find "New", I need better directions.

when I typed in about:config in the address bar and hie enter, what appeared looked like a lot of files, pages of them, I didn't know where to right click from the menu select "New"

Which prefs to you want to change?
It is not recommended to change prefs in order to tweak some settings.<br />
Do you have specific problems?

Can I insert the name poperty of the RequestedByUser related object of the parent Change Request workitem in a review activity email notification template?

I am working on a SCSM change control workflow driven by email.
A lot of my work is based on the information found in this post:
http://blogs.technet.com/b/servicemanager/archive/2012/04/03/using-data-properties-from-the-parent-work-items-in-activity-email-templates.aspx#pi158453=4
This is an excellent post to which my Internet searches continually return. The workflow is about 90% complete.
My question is can I insert the properties of a related object of the parent workitem in a workflow email notification?
For example, I want to include the name property of the RequestedByUser related object of the parent workitem object in a review activity notification.

Thank you for your reply. I have confirmed my template is using a projection that includes the parent workitem and requested by user. Where I am having trouble is the notification template syntax used to call the properties of the related
object of the parent workitem. The picker in the GUI won't show that related object, so I have no example to follow. I hope this reply makes sense!

Why is com.sun.config.ConfigureListener the frist one to be executed when T

In JSF1.1 guessNumber demo
The web.xml does not define a ServletContextListener.
why is com.sun.config.ConfigureListener the frist one to be executed when Tomcat begins running?
web.xml:
<!DOCTYPE web-app PUBLIC
"-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<display-name>JavaServer Faces Guess Number Sample Application</display-name>
<description>
JavaServer Faces Guess Number Sample Application
</description>
<context-param>
<param-name>javax.faces.STATE_SAVING_METHOD</param-name>
<param-value>client</param-value>
</context-param>
<context-param>
<param-name>com.sun.faces.validateXml</param-name>
<param-value>true</param-value>
<description>
Set this flag to true if you want the JavaServer Faces
Reference Implementation to validate the XML in your
faces-config.xml resources against the DTD. Default
value is false.
</description>
</context-param>
<context-param>
<param-name>com.sun.faces.verifyObjects</param-name>
<param-value>true</param-value>
<description>
Set this flag to true if you want the JavaServer Faces
Reference Implementation to verify that all of the application
objects you have configured (components, converters,
renderers, and validators) can be successfully created.
Default value is false.
</description>
</context-param>

<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup> 1 </load-on-startup>
</servlet>

<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>/guess/*</url-pattern>
</servlet-mapping>
<security-constraint>

<display-name>Restrict access to JSP pages</display-name>
<web-resource-collection>
<web-resource-name>
Restrict access to JSP pages
</web-resource-name>
<url-pattern>/greeting.jsp</url-pattern>
<url-pattern>/response.jsp</url-pattern>
</web-resource-collection>
<auth-constraint>
<description>
With no roles defined, no access granted
</description>
</auth-constraint>
</security-constraint>
</web-app>
com.sun.config.ConfigureListener is the frist one to be executed when Tomcat begins running?
why?
Thread: main
<init>() : 98, com.sun.faces.application.ApplicationAssociate, ApplicationAssociate.java
<init>() : 98, com.sun.faces.application.ApplicationImpl, ApplicationImpl.java
getApplication() : 74, com.sun.faces.application.ApplicationFactoryImpl, ApplicationFactoryImpl.java
application() : 384, com.sun.faces.config.ConfigureListener, ConfigureListener.java
configure() : 427, com.sun.faces.config.ConfigureListener, ConfigureListener.java
configure() : 402, com.sun.faces.config.ConfigureListener, ConfigureListener.java
contextInitialized() : 332, com.sun.faces.config.ConfigureListener, ConfigureListener.java
listenerStart() : 3669, org.apache.catalina.core.StandardContext, StandardContext.java
start() : 4104, org.apache.catalina.core.StandardContext, StandardContext.java
start() : 1012, org.apache.catalina.core.ContainerBase, ContainerBase.java
start() : 718, org.apache.catalina.core.StandardHost, StandardHost.java
start() : 1012, org.apache.catalina.core.ContainerBase, ContainerBase.java
start() : 442, org.apache.catalina.core.StandardEngine, StandardEngine.java
start() : 450, org.apache.catalina.core.StandardService, StandardService.java
start() : 683, org.apache.catalina.core.StandardServer, StandardServer.java
start() : 537, org.apache.catalina.startup.Catalina, Catalina.java
invoke0() : -1, sun.reflect.NativeMethodAccessorImpl, NativeMethodAccessorImpl.java
invoke() : 39, sun.reflect.NativeMethodAccessorImpl, NativeMethodAccessorImpl.java
invoke() : 25, sun.reflect.DelegatingMethodAccessorImpl, DelegatingMethodAccessorImpl.java
invoke() : 585, java.lang.reflect.Method, Method.java
start() : 271, org.apache.catalina.startup.Bootstrap, Bootstrap.java
main() : 409, org.apache.catalina.startup.Bootstrap, Bootstrap.java

why is com.sun.config.ConfigureListener the frist one to be executed when Tomcat begins running(no config in web.xml)?

TS1292 itunes says my itunes card "has not been properly activated" when i enter the code. this is not the "invalid" message related to entering the code improperly.

itunes says my itunes card "has not been properly activated" when i enter the code. this is not the "invalid" message related to entering the code improperly.

Are you able to go back to the store that you bought it from and ask them to activate it properly ? If not then you will need to try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

How to fetch the relational data from the xml file registered in xdb

Hi,
I have to register the xml file into the xdb repository and i have to fetch the data of the xml file as relational structure through the select statement .
i used the below query to register the xml file in xdb.
DECLARE
v_return BOOLEAN;
BEGIN
v_return := DBMS_XDB.CREATERESOURCE(
abspath => '/public/demo/xml/db_objects.xml',
data => BFILENAME('XML_DIR', 'db_objects.xml')
COMMIT;
END;
Now i have to fetch the values in the xml file as relational data .
whether it is possible ?
can any one help me.
Regards,
suresh.

When you transform your XMLdata to a xmltype you can do something like this for example:
select
extractvalue(value(p),'/XMLRecord/Session_Id') session_id,
extractvalue(value(p),'/XMLRecord/StatementId') StatementId,
extractvalue(value(p),'/XMLRecord/EntryId') EntryId
from
table(xmlsequence(extract(xmltype('
<XMLdemo>
<FormatModifiers><FormatModifier>UTFEncoding</FormatModifier></FormatModifiers>
<XMLRecord>
<Session_Id>117715</Session_Id>
<StatementId>6</StatementId>
<EntryId>1</EntryId>
</XMLRecord>
</XMLdemo>
'),'/XMLdemo/*'))) p
where extractvalue(value(p),'/XMLRecord/Session_Id') is not null;
For this sample I've put a readable XML in plain text and convert it to xmltype so you can run it on your own database.

How do I make document relative links for the site?

How do I make document
relative links for the site -
<img src="../images/foo.gif"... (for example)?

> How do I make document
> relative links for the site -
look in the bottom of the "browse to file" dialog box.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Del related and order related billing on the same order - timing problem

Hi,
In our repair process we need to bill out the loaner part (we put the money on the loaner line that gets shipped and create a delivery related billing document) as well as repaired material when that comes in, goes through the repair and gets shipped back to the customer. In billing the repair itself the money goes onto a special order related line (repQuo check box on the main repair line in the sales order entry).
The problem is that the billing due list shows the order related line due for billing after it is created. We are not supposed to bill the line until the repair is completed. The invoice actually never gets created, the log is output with the error stating that it cannot invoice before the repair is completed, but it still shows in VF04. If I put the order on bill block and filter out blocked orders in VF04, then I can't bill the delivery related loaner parts.
Any suggestions how to make VF04 not show the order related line until the repair is completed?
Thank you,
Sergiy

Check Billing Relevance of your I Cats(VOV7) and maintain them as per your requirement.
As that indicates what the basis for billing should be.
A: Delivery-related billing document - Billing is based on the outbound delivery. Billing status is only updated in the outbound delivery.
B: Relevant for order-related billing - status according to order quantity - Billing is based on the sales document. The requested delivery quantity determines the billing status.
C: Relevant for order-related billing - status according to target quantity - Billing is based on the sales document. The target quantity determines the billing status.
F: Order-related billing doc - status according to invoice quantity - Relevant for order-related billing documents based on the invoice receipt quantity (third-party business transaction). The system transfers the order into the billing due list only after the vendor invoice has been received and processed in the purchasing department. After the receipt of each invoice, a customer invoice is created for the quantity that appears on the vendor invoice. The order has status "Billed" until the next vendor invoice is received. Item category TAS (Third party item) is set up with billing relevance "F" in the standard system. This process can also be related to the quantity of goods receipt. You can make the control setting as to whether the invoice receipt quantity or the goods receipt quantity should be relevant for billing in the copy control for billing on the item level in the billing quantity field. (In Customizing, choose Sales and Distribution -> Billing -> Billing documents -> Maintain Copying Control for Billing Documents -> Copying Control: Delivery to Billing Document -> Item, then select an item category.)
G: Order-related billing of the delivery quantity - The order is relevant for billing. More specifically, the cumulative delivery quantity that was already delivered is relevant for billing. You can use this category to bill for multiple partial deliveries at once.
H: Delivery-related billing - no zero quantities - You can use this category to avoid items with a value of zero being included in the billing document.
K: Delivery-related invoices for partial quantity - You can use this indicator if you want to select both items and partial quantities for billing.
Hope this can assist you in understanding.
Thanks & Regards
JP

Retieve the related childern to the selected Tree Node

Hello all,
From here i got the folowing code,it helps me to retrieve the whole record which is related to the selected node in
WHEN-TREE-NODE-SELECTED Trigger :
declare
     rank   number := 0;
begin
     rank :=
     ftree.get_tree_node_property('TREE_BLOCK_TEST.TREE13',
         :system.trigger_node, ftree.node_depth);
          if rank >= 1 then
                   GO_BLOCK ('INSP_EQUIPMENT_TYPE');
                  set_block_property ('INSP_EQUIPMENT_TYPE', default_where,
                        'EQUIPMENT_TYPE_D='||ftree.get_tree_node_property('TREE_BLOCK_TEST.TREE13',
                           :system.trigger_node, ftree.node_value));
                                    Execute_Query(No_ValiDATE);
          end if;
          end; What i want to do is to retieve not only the current record for the selected node but aslo the related childern in the tree to this node.
Could anyboady help me pls. ?!
Regards,
Abdetu..

Hi Tony,
what i am trying to do is to display all childern related to the parent 's node selected from the tree that's works fine..
But i want to display the related datablock selected to the child itself the following can't do that can u help me doing it pls...!
DECLARE
     rank number := 0;
     HTREE$ ITEM := Find_Item('TREE_BLOCK_TEST.TREE13');
BEGIN
IF :SYSTEM.TRIGGER_NODE_SELECTED = 'TRUE' THEN
     rank :=     ftree.get_tree_node_property
     ('TREE_BLOCK_TEST.TREE13',:system.trigger_node, ftree.node_depth);
     if rank = 1 then
     set_block_property ('INSP_EQUIPMENT_TYPE', default_where
          , 'parent_id='||ftree.get_tree_node_property('TREE_BLOCK_TEST.TREE13',
          :system.trigger_node, ftree.node_value));
                    GO_BLOCK ('INSP_EQUIPMENT_TYPE');
                    Execute_Query(No_ValiDATE);
     elsif rank > 1 then
          set_block_property ('INSP_EQUIPMENT_TYPE', default_where
          ,'EQUIPMENT_TYPE_D='||ftree.get_tree_node_property('TREE_BLOCK_TEST.TREE13',
          :system.trigger_node, ftree.node_value));
     else
     :INSP_EQUIPMENT_TYPE.EQUIPMENT_TYPE :=
FTREE.GET_TREE_NODE_PROPERTY(HTREE$, :SYSTEM.TRIGGER_NODE, FTREE.NODE_LABEL);
     END IF;
     END IF;
     END;

Where to find company related details in the transaction Me42

I am reteriving the address like this Use table EKKO find the Bukrs field,use this field to find the adrnr field from the table ADRC. From adrc reterieve the values.
Where do i find the company related details in the transaction Me42

Hi,
In Tcode: ME42, enter the request for quotation number (RFQ) and press enter. System will take you to 'Item Overview' screen. From menu select 'Header' -- 'Details' or press F6. Then the system will take you to 'Header screen' there you can see the 'company code' after RFQ number field.
Or
Directly from Tcode: ME42, enter the request for quotation number,then from menu select 'Header' -- details. Here you can have the company code field.
The data for company here too will get updated in table and field EKKO-BUKRS.
Hope this helps.
Thanks,
Viswanath

Related BAPIs for the Infotypes

Dear Friends ,
I have got an issue to post the following details to external system Can anyone please provide me the related BAPIs for the following Infotypes.
Infotype 02 - Personel details
Infotype 06 - Adress details
Infotype 09 - Bank details
Infotype 33 - Statistics
Infotype 21 - Family details
Infotype 08 - Basic Pay
Infotype 28 - Internal Medical Service
Infotype 22 - Education details
Regards,
Gopi.

Hi,
System can work even if target system not always online. The IDoc will be created and sendingcontinue once the system has coneected to other system
System can work that target system always online and active then only it interacts both system use bapi. It will be disadvantage of bapi
The tabe TBDBA stores the relavant message type, IDOC type, OUtbound function module,inbound module that are generated as part of the ALE BAPI interface for a particular Business object method
Edited by: sekharch on Jan 9, 2011 4:17 PM

NCM related config on the 3750x??

Similar Messages

Maybe you are looking for