NCS 1.2 - Cannot configure OEAP AP - Error Mandetory : AP username, pass, enable

Hi all
Just wanted to ask if anyone else is getting this error message when trying to configure a OEAP600 AP in NCS 1.2.
Description:
When trying to configure a OEAP600 AP in NCS1.2, fx. setting a new AP Group Name, and pressing save, a error pops up telling me that: "AP username, password and enable password are mandatory". "Make the necessary corrections and try again".
These fields are not present on the OEAP600 configuration page ( for a reason :-) ).
I cannot find a known bug ID for this, so I just wanted to know if I was the only one experiencing this problem ?

Forgot to update this: The BugID is : CSCud33269

Similar Messages

I cannot download ADOBE Flash. The error message is FAILED from Firefox. The other error message is "CANNOT CONFIGURE APPLICATION." Any suggestions?

ADOBE 12.exe downloaded. FLASH will download but won't install. The error message is "CANNOT CONFIGURE
APPLICATION."

You can try to run the Flash installer as Administrator.
Latest Flash player versions here:
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html

Setup synchronize with address for Sage ACT! showed Runtime Error: Cannot configure the section.

Hello Blackberry Senbai...
As my problem showed as subject line. "When I setup synchronize with address book for Sage ACT! showed Runtime Error: Cannot configure the section."
Setup was stopped from this point.
my system info..
Desktop Manager version is 5.0 downloaded from Blackberry website.
ACT version is 2010.
OS: Window XP Pro with service pack 3
Thank you for your time to review my problem.

Hi and Welcome to the Forums!
Since the version of ACT that you state is not contained in the PIM compatibility matrix, I'm not sure that there is anything to be offerred...
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Time Capsule Error Code 6753 - Cannot Configure

I recently purchased a 2TB Time Capsule. The setup went fine, I didn't do anything radical, just let it start a network. The network wifi and ethernet both work fine, time machine backups work fine. Everything works fine.
The problem is that I cannot access the TC's configuration in Airport Utility now, unless I reset the TC. After a reset I can configure it, and then next time I try it cannot be read again (error code 6753).
Airport Utility can see the TC just fine, but clicking 'continue' or 'manual setup' results only in it sitting there for a while trying to read the device, and then saying there was an error.
Does anyone have any advice?

Are you connecting to the TC from your computer using an ethernet connection?
If not, connect an ethernet cable from your computer to one of the LAN <-> ports on the Time Capsule and try it again.
If you continue to have difficulties, you may need to do a Factory
Default Reset.
Power off the TC for 5-10 minutes
Hold in the reset button and keep holding it while you plug the power back in to the TC
Keep holding the reset button until you see the amber light begin to flash more quickly.
Then try to reconfigure the TC, again using the ethernet connection. Please post back on your results.
Message was edited by: Bob Timmons

OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PM

Hi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
 </default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
 <connection-properties>
 <properties>
 <property>
 <name>xADataSourceName</name>
 <value>jdbc/SOADataSource</value>
 </property>
 <property>
 <name>dataSourceName</name>
 <value></value>
 </property>
 <property>
 <name>platformClassName</name>
 <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
 </property>
 </properties>
 </connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
   at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adil

Do you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Configuration framework system error - the configurable won't be loaded

Hi, I have followed the tutorial on how to url=https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/kmc/Implementing%20Resource%20List%20Filters%20for%20Flexible%20UI%20Navigation/index.htm]Implement a Resource List Filters for Flexible UI Navigation[/url]
When uploading my par file into the portal, I get following error in the defaulttrace file, although the filter works :
[synchronizer_(config://install/cm/services/resourcelistfilter)_(source:config://import/install/data/cm/services/resourcelistfilter)] cannot load [(configurable: SimpleTbpResourceListFilter:ResourceListFilter)] : ConfigException: Configuration framework system error: "id consistency error on [SimpleTbpResourceListFilter != SimpleTBPResourceListFilter] : the configurable won't be loaded ! please, check file name..."
Seems like it's related to the configuration of the .co.xml file. Like in the tutorial I have created this file in location src.config - install - date - cm - services - resourcelistfilter (this folder had to be created manually, not generated by the RF wizard).
_simple_tbp_resource_list_filter.co.xml
<?xml version="1.0" encoding="UTF-8" ?>

<Configurable configclass="ResourceListFilter">
<property name="classname" value="z.imec.flexsort.filter.SimpleTBPResourceListFilter"/>
<property name="description" value="A sample implementation of a resource list filter. Filters out documents with TBP Valid From and Valid To properties."/>
<property name="alias" value="SimpleTBPResourceListFilter"/>
</Configurable>
configArchive.properties
# com.sap.portal.pdk.srv.config
ca.name=SimpleTBPResourceListFilter.prjconfig
ca.version=6.0.1.1
ca.creation.time=1708
ca.creation.date=20070425
ca.creation.user=Kevin Laevers
ca.creation.machine=unknown
ca.dependencies: bc.util.prjconfig, bc.sf.prjconfig, bc.sf.service.prjconfig, bc.rf.prjconfig
cma.name=SimpleTBPResourceListFilter.prjconfig
cma.version=6.0.1.1
cma.storage=sfs
cma.creation.time=1708
cma.creation.date=20070425
cma.creation.user=Kevin Laevers
cma.creation.machine=unknown
cma.dependencies: bc.util.prjconfig, bc.sf.prjconfig, bc.sf.service.prjconfig, bc.rf.prjconfig
Any idea on the message in the defaulttrace file?
Thanks :o)
Kevin

Hello,
Can you please explain what exactly the issue? I'd like to know any issues you are having with the video workflow.
Thanks,
Vish

PS CC: Camera Raw filter gives "cannot parse your files" error

Hi
I can open files fine in Photoshop CC, but if I try to use the Camera Raw filter, I get the "file format module cannot parse your files" error. This only happens with larger TIFFs, say 300 MB or so - 70 MB files work fine. I have a fast machine running Windows 7 with 12GB of RAM, so I would expect to have enough space, but maybe it isn't configured properly in PS preferences?
Thanks for any help,
Peter

siskin11 wrote:
Hi
I can open files fine in Photoshop CC, but if I try to use the Camera Raw filter, I get the "file format module cannot parse your files" error. This only happens with larger TIFFs, say 300 MB or so - 70 MB files work fine.
300MB Tiff seems like a large files size for a Tiff which leads me to believe its a layered Tiff. ACR does not have Layers support try opening the Tiff file in Photoshop not through ACR to see it there are layers. If there are target all of them and convert to a smart Object then try ACR as a filter. A smart object is a single layer in Photoshop.

Policy web agent configuration failed: NSPR error Configuration Failed!!!!

I am having troubles to install agent Apache 2.2!!!!!
The libamapc22.so uses libstdc++.so.5....
so i have this error:
root@ped-02 bin# service httpd start
Starting httpd: httpd: Syntax error on line 995 of /etc/httpd/conf/httpd.conf: Syntax error on line 1 of /opt/web_agents/apache22_agent/Agent_006/config/dsame.conf: Cannot load n/opt/web_agents/apache22_agent/lib/libamapc22.so into server: libstdc++.so.5: cannot open shared object file: No such file or directory
In my OS is Installed the libstdc++.so.6
if I Install the libstdc++.so.5
I have this error:
[Wed Aug 20 15:50:35 2008] [notice] Digest: generating secret for digest authentication ...
[Wed Aug 20 15:50:35 2008] [notice] Digest: done
[Wed Aug 20 15:50:35 2008] [alert] Policy web agent configuration failed: NSPR error Configuration Failed
So I have installed NSPR and NSS but this error persists.
In log /opt/web_agents/apache22_agent/Agent_006/logs/debug/amAgent
===========
2008-08-20 16:16:36.152 Error 18271:b949c3d0 all: Connection::initialize() unable to initialize SSL libraries: NSS_Initialize returned -8128
2008-08-20 16:16:36.156 Error 18271:b949c3d0 all: initialization error: am_properties_load(com.sun.am.policy.agents.config.stopInInit) failed, error = NSPR error (12): exiting...
2008-08-20 16:16:36.156 Error 18271:b949c3d0 all: Process initialization failure:NSPR error
My configuration: ---- AMAgent.properties
com.sun.am.cookie.name = iPlanetDirectoryPro
com.sun.am.cookie.secure = false
com.sun.am.naming.url = http://accessmanager.coreo.network.ctbc:8080/opensso/namingservice
com.sun.am.policy.am.login.url = http://accessmanager.coreo.network.ctbc:8080/opensso/UI/Login
com.sun.am.policy.agents.config.local.log.file =/opt/web_agents/apache22_agent/Agent_006/logs/debug/amAgent
com.sun.am.policy.agents.config.local.log.rotate = false
com.sun.am.policy.agents.config.remote.log = amAuthLog.accessmanager.coreo.network.ctbc.80
com.sun.am.log.level =
com.sun.am.policy.am.username = amadmin
com.sun.am.policy.am.password = fhfeUCQselvAndSuo17Pww==
com.sun.am.sslcert.dir =
com.sun.am.certdb.prefix =
com.sun.am.trust_server_certs = true
com.sun.am.notification.enable = false
com.sun.am.notification.url=http://accessmaager.coreo.network.ctbc:80/UpdateAgentCacheServlet?shortcircuit=false
com.sun.am.policy.am.url_comparison.case_ignore = true
com.sun.am.policy.am.polling.interval=3
com.sun.am.sso.polling.period=3
com.sun.am.policy.am.userid.param=UserToken
com.sun.am.policy.agents.config.profile.attribute.fetch.mode=NONE
com.sun.am.policy.agents.config.profile.attribute.map=cn|common-name,ou|organizational-unit,o|organization,mail|email,employeenumber|employee-number,c|country
com.sun.am.policy.agents.config.session.attribute.fetch.mode=NONE
com.sun.am.policy.agents.config.session.attribute.map=
com.sun.am.policy.agents.config.response.attribute.fetch.mode=NONE
com.sun.am.policy.agents.config.response.attribute.map=
com.sun.am.load_balancer.enable = false
com.sun.am.policy.agents.config.version=2.2
com.sun.am.policy.agents.config.audit.accesstype = LOG_DENY
com.sun.am.policy.agents.config.agenturi.prefix = http://accessmanager.coreo.network.ctbc:80/amagent
com.sun.am.policy.agents.config.locale = en_US
com.sun.am.policy.agents.config.instance.name = unused
com.sun.am.policy.agents.config.do_sso_only = false
com.sun.am.policy.agents.config.accessdenied.url =
com.sun.am.policy.agents.config.fqdn.check.enable = true
com.sun.am.policy.agents.config.fqdn.default = accessmanager.coreo.network.ctbc
com.sun.am.policy.agents.config.fqdn.map =
com.sun.am.policy.agents.config.cookie.reset.enable=false
com.sun.am.policy.agents.config.cookie.reset.list=
com.sun.am.policy.agents.config.cookie.domain.list=
com.sun.am.policy.agents.config.anonymous_user=anonymous
com.sun.am.policy.agents.config.anonymous_user.enable=false
com.sun.am.policy.agents.config.notenforced_list = SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/UI/* SERVER_PROTO://SERVER_HOST:SERVER_PORTCONSOLE_DEPLOY_URI/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/login_images/* SERVER_PROTO://SERVER_HOST:SERVER_PORT/docs* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/namingservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/sessionservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/loggingservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/profileservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/policyservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/config* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/js/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/css/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/authservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLAwareServlet SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLSOAPReceiver SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLPOSTProfileServlet
com.sun.am.policy.agents.config.notenforced_list.invert = false
com.sun.am.policy.agents.config.notenforced_client_ip_list =
com.sun.am.policy.agents.config.postdata.preserve.enable = false
com.sun.am.policy.agents.config.postcache.entry.lifetime = 10
com.sun.am.policy.agents.config.client_ip_validation.enable = false
com.sun.am.policy.agents.config.profile.attribute.cookie.prefix = HTTP_
com.sun.am.policy.agents.config.profile.attribute.cookie.maxage = 300
com.sun.am.policy.agents.config.logout.url=
com.sun.am.policy.agents.config.logout.cookie.reset.list =
com.sun.am.policy.am.fetch_from_root_resource = true
com.sun.am.policy.agents.config.get_client_host_name = true
com.sun.am.policy.agents.config.convert_mbyte.enable = false
com.sun.am.policy.agents.config.ignore_path_info = false
com.sun.am.policy.agents.config.override_protocol =
com.sun.am.policy.agents.config.override_host =
com.sun.am.policy.agents.config.override_port =
com.sun.am.policy.agents.config.override_notification.url =
com.sun.am.policy.agents.config.connection_timeout =
com.sun.am.receive_timeout = 0
com.sun.am.connect_timeout = 0
com.sun.am.poll_primary_server = 5
com.sun.am.tcp_nodelay.enable = false
com.sun.am.policy.agents.config.encode_url_special_chars.enable = false
com.sun.am.policy.agents.config.iis.filter_priority = HIGH
com.sun.am.policy.agents.config.cdsso.enable=false
com.sun.am.policy.agents.config.cdcservlet.url = http://accessmanager.coreo.network.ctbc:8080/opensso/cdcservlet
Jonathan Costa Muniz.

Hi joncmuniz,
Are you managed to resolve this problem? I have the same.
In logs i have such information:
2008-10-08 16:48:02.471   Debug 23153:84d5368 all: Connection::initialize() calling NSS_Initialize() with directory = "" and prefix = ""
2008-10-08 16:48:02.471   Debug 23153:84d5368 all: Connection::initialize() Connection timeout wen receiving data = 0 milliseconds
2008-10-08 16:48:02.472   Error 23153:84d5368 all: Connection::initialize() unable to initialize SSL libraries: NSS_Initialize returned -8128
2008-10-08 16:48:02.475   Error 23153:84d5368 all: initialization error: am_properties_load(com.sun.am.policy.agents.config.stopInInit) failed, error = NSPRerror (12): exiting...
2008-10-08 16:48:02.475   Error 23153:84d5368 all: Process initialization failure:NSPR errorI think the problem is with certificates, but i can't point where.
Can you help?

Every time i try to update adobe shockwave i get a cannot configure messege

when i run the add - on manager check to see if your plug-ins are outdated --- it tells me i need to update adobe shockwave--- i go through the steps to download and it gives me an error Host cannot configure--- i have a gateway pc with windows 8 that will not update to windows 8.1 is there anything you can do to help?

Perform a clean installation of Flash Player as follows.
# From the following page, save the uninstaller somewhere handy, like the desktop.
#* [http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html#main_Download_the_Adobe_Flash_Player_uninstaller Uninstall Flash Player for Windows | Adobe Support]
# From the following page, save the installer for other browsers. If you also use Flash Player in Internet Explorer, also save the ActiveX version.
#* [http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#main-pars_text_4 Direct downloads of Flash Player for Windows | Adobe Support]
# Exit all applications.
# Run the uninstaller.
# In Windows Explorer, try to open the following folders. If they still exist, delete them manually.
#* <pre>C:\Windows\system32\Macromed\Flash\</pre>
#* <pre>C:\Windows\SysWOW64\Macromed\Flash\</pre>
#* <pre>%AppData%\Adobe\Flash Player\</pre>
#* <pre>%AppData%\Macromedia\Flash Player\</pre>
# Restart your computer.
# Run the installer for other browsers.
# Run the ActiveX installer if you downloaded it.

Cannot configure Airport Express

I've set up my Airport Express as a wireless client, the computer recognizes it (it shows up on Airport Utility), but I cannot configure it...everytime I try it says an error occured when trying to communicate, and that's it. All I want to do is play music wirelessly, but I can't select wireless speakers from iTunes...I've already tried a hard and factory reset, no dice...any idea out there?

Solved my own problem, I guess. Updating the Airport Express Firmware to version 6.3 solved the problem: http://www.apple.com/support/downloads/airportexpressfirmwareupdate63formacosx.h tml
The unfortunate thing is that there was nothing via Airport Utility or Apple Software Update that told me it was necessary to do so. The only reason I discovered this as the problem was trying to connect to the Airport Express using Rogue Amoeba's Airfoil. It diagnosed the problem immediately and sent me to the proper URL to download the firmware update...
Message was edited by: BK BIg Fish

Cannot configure parameter FORMULA_FILE_NO in task /CPMB/IOBJ_SOURCE_MD_CON

Hi
When I am trying load data from Bi infoobject to BPC dimension following error I am getting.
"Cannot configure parameter FORMULA_FILE_NO in task /CPMB/IOBJ_SOURCE_MD_CONVERT"
Can any body give me suggestion to resolve this issue
Mahi

Hi
Here I have taken small exmaple
I have taken city and country . country is attribute of city. I my transformation file id=id, city=0city, country=0country. No conversion file. I have validated transformation file successfully. I hve created data manager package. here I hve selected process chain i.e iobj_masterdata_load . I have not changed dynamic script. when running the package I am geting the above error
thanks in advance
mahi

Cannot configure mod_ose

I use Oracle 9i on Win2k, but I cannot configure oracle servlet engine to work with apache web server.
my mod_ose looks like
LoadModule ose_module E:\oracle\ora81\Apache/modose/bin/orajipa9i.dll
<IfModule mod_ose.c>
AuroraService inst1_http
AuroraWorkersPerProcess 50
# Context for VPATH /
<Location /errors/internal >
SetHandler aurora-server
</Location>
<Location /index.jsp >
SetHandler aurora-server
</Location>
</IfModule>
but when I invoke page http://localhost/index.jsp, apache looks for it at
<APACHE_HOME>\apache\htdocs\index.jsp, as if it were static page.
What could go wrong?

I tried mod_ose under Windows NT 4.0 and
got it running with and without MTS configuration.
You should use port number 1521 (not 5521) because the module tries to connect your server via SQL*NET.
Also you have to establish a net8 endpoint (via addendpoint) in the session shell to make your service available for incoming SQL*NET connections.
Reiner
<BLOCKQUOTE>quote:<HR>Originally posted by Tristan Glenwright ([email protected]):
I have Oracle 8.1.7 installed on Solaris 7 / Sparc.
I'm trying to get mod_ose to work with the Apache server that is installed with 8.1.7. I configured the init.ora and tnsnames.ora as outlined in Section 5.2 of the 8.1.7 Java Virtual Machine, EJB/Corba and Oracle Servlet Engine README for a non MTS enabled database. In this configuration when I try to access any of the paths in the mod__ose.conf file, I get an Error page that the service is temporarily unavailable. I've bounced apache and the database multiple times.
The tnsnames.ora entry in the README file has PORT=5521. Is this just an example? If I use the port that the database dynamically assigns to the mts dispatcher (from V$DISPATCHER) then mod_ose establishes a connection, but always returns a 404 error.
Please help.<HR></BLOCKQUOTE>
null

Cannot configure my AirPort Express (1st generation) anymore. Am using AirPort Utility 5.4.2 Setup Assistant. What do I do wrong?

I cannot configure my AirPort Express (1st generation) as base Station anymore. I had to reset it because I lost my password.
I first tried my IPads (IOS 6). These returned the message: Your AirPort Express cannot be configured with this software. Go to apple.com/nl/support/airport for more information.
As it is an old one, I have downloaded the eldest available AirPort Utility I could find on the Apple site (AirPort utility 5.4.2) to my computer. I ran the AirPort Setup Assistant wireless and the assistant found my AirPort named " Apple Network XXXXX". (I notes that the Assistant also returned the message: If this is not the AirPort Extreme you want to set up ...)
I clicked <NEXT>
After trying to connect to Network, I received the message: Cannot connect to network or there are no AirPort base stations on the network.
To be sure I retried running the Assistant after connecting the computer and the AirPort using an ethernet cable. The error message was the same.
What do I do wrong?
Am I using the wrong Utility software? If so, which version do I have to download and from where?
Is a first generation AirPort anyhow compatible wth 4the generation IPads or shoud I just buy a new AirPort.
I hope someone can help me...

Ok, thanks for clarifying that for me. You are correct. Your iOS devices will NOT be able to administer the 802.11g base stations because the version of the AirPort Utility that they use is incompatible.
For Windows XP, AirPort Utility for Windows v5.5.3 should work. However, v5.4.2 that you have should work as well.
Your XP computer needs to connect to the AirPort's wireless network BEFORE you can access the AirPort with the AirPort Utility. You may want to try connecting your computer directly to the AirPort using an Ethernet cable.

Cannot retrieve teplate structure: Error creating PDF

Hi,
I've installed a Composite Form as the start of a process, and when I go to Administration and try to generate the PDF file I get the following error:
Cannot retrieve teplate structure: Error creating PDF
When I go to the log, I get this trace:
Error creating PDF
com.sap.caf.eu.gp.base.exception.EngineException: Error creating PDF
at com.sap.caf.eu.gp.model.forms.adapter.FormAdapterMediator.createInstanceDocument(FormAdapterMediator.java:462)
at com.sap.caf.eu.gp.model.forms.preproc.FormPreprocessor.instanciateTemplate(FormPreprocessor.java:1982)
at com.sap.caf.eu.gp.model.forms.preproc.FormPreprocessor.createImpersonalizedFormInstance(FormPreprocessor.java:1170)
at com.sap.caf.eu.gp.ui.admin.uforms.UnpersonalizedFormsManager.createNewForm(UnpersonalizedFormsManager.java:888)
at com.sap.caf.eu.gp.ui.admin.uforms.UnpersonalizedFormsManager.createForm(UnpersonalizedFormsManager.java:457)
at com.sap.caf.eu.gp.ui.admin.uforms.wdp.InternalUnpersonalizedFormsManager.createForm(InternalUnpersonalizedFormsManager.java:190)
at com.sap.caf.eu.gp.ui.admin.uforms.CreateUForm.onActionOK(CreateUForm.java:243)
at com.sap.caf.eu.gp.ui.admin.uforms.wdp.InternalCreateUForm.wdInvokeEventHandler(InternalCreateUForm.java:156)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:131)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:72)
at com.sap.tc.webdynpro.clientserver.phases.ProcessingEventPhase.doHandleActionEvent(ProcessingEventPhase.java:156)
at com.sap.tc.webdynpro.clientserver.phases.ProcessingEventPhase.execute(ProcessingEventPhase.java:91)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequestPartly(WindowPhaseModel.java:161)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doProcessRequest(WindowPhaseModel.java:109)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:96)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:469)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:52)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doExecute(ClientApplication.java:1395)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doProcessing(ClientApplication.java:1215)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToApplicationDoProcessing(AbstractExecutionContextDispatcher.java:158)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForAppProcessing.doService(DispatchHandlerForAppProcessing.java:35)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:116)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:93)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToApplicationDoProcessing(ExecutionContextDispatcher.java:114)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:81)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:506)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:526)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doApplicationProcessingStandalone(ApplicationSession.java:457)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:248)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:699)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:231)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:230)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToRequestManager(AbstractExecutionContextDispatcher.java:205)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForRequestManager.doService(DispatchHandlerForRequestManager.java:38)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:116)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:93)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToRequestManager(ExecutionContextDispatcher.java:140)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:93)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:105)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doPost(AbstractDispatcherServlet.java:61)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:309)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
Caused by: com.sap.caf.eu.gp.model.forms.exceptions.AdapterException: Error creating PDF
at com.sap.caf.eu.gp.model.forms.exceptionhandling.ExceptionHandler.throwAdapterException(ExceptionHandler.java:851)
at com.sap.caf.eu.gp.model.forms.adapter.pdf.AdobeDSFormAdapter.createInstanceDocuments(AdobeDSFormAdapter.java:180)
at com.sap.caf.eu.gp.model.forms.adapter.pdf.AdobeAdapter.createInstanceDocument(AdobeAdapter.java:204)
at com.sap.caf.eu.gp.model.forms.adapter.FormAdapterMediator.createInstanceDocument(FormAdapterMediator.java:456)
... 70 more
Caused by: com.sap.tc.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: PDFDocument Processor failed to process RenderRequest...
at com.sap.tc.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:55)
at com.sap.tc.adobe.pdfdocument.base.core.PDFDocumentCreationContext.execute(PDFDocumentCreationContext.java:136)
at com.sap.tc.adobe.pdfdocument.impl.PDFCreationContextImpl.execute(PDFCreationContextImpl.java:90)
at com.sap.caf.eu.gp.model.forms.adapter.pdf.AdobeDSFormAdapter.createInstanceDocuments(AdobeDSFormAdapter.java:152)
... 72 more
Caused by: com.sap.tc.adobe.pdfobject.core.PDFObjectRuntimeException: Logical Target ConfigPort_Document not mapped to a physical system.
at com.sap.tc.adobe.pdfobject.core.PDFObjectDII.invoke(PDFObjectDII.java:349)
at com.sap.tc.adobe.pdfobject.core.PDFObjectDII.doSoapCall(PDFObjectDII.java:81)
at com.sap.tc.adobe.pdfobject.core.PDFObject.render(PDFObject.java:3610)
at com.sap.tc.adobe.pdfdocument.base.core.PDFDocumentRenderHandler.handle(PDFDocumentRenderHandler.java:152)
at com.sap.tc.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:52)
... 75 more
Caused by: com.sap.engine.services.webservices.espbase.discovery.TargetNotMappedException: Logical Target ConfigPort_Document not mapped to a physical system.
at com.sap.esi.esp.service.server.query.discovery.DestinationsHelperImpl.getDSTTemplateForSystem(DestinationsHelperImpl.java:894)
at com.sap.esi.esp.service.server.query.discovery.DestinationsHelperImpl.getWSDLUrl(DestinationsHelperImpl.java:397)
at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.getWSDLUrl(GenericServiceFactory.java:222)
at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService_NewInstance(GenericServiceFactory.java:187)
at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:175)
at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:160)
at com.sap.tc.adobe.pdfobject.core.PDFObjectDII.invoke(PDFObjectDII.java:278)
... 79 more

The address is http://<host>:<port>/inspection.wsil
It need not be localhost. Any address that's visible to the WAS where you are configuring should work. Make sure to provide the user account and password configured for ADS on the security settings of the destination.
One other thing I forgot to ask - did you do all the steps requried to configure ADS with CE? If not, please send me your email address and I'll send you the doc.
Thanks!
Rao

NCS 1.2 - Cannot configure OEAP AP - Error Mandetory : AP username, pass, enable

Similar Messages

Maybe you are looking for