NCS and 3500 with CleanAir - Not seeing data?

Question,
This is going to end up being really dumb, I can just feel it. So, we demo'd a 3500 with CleanAir before working with Cisco and purchasing a first batch. The demo worked as expected, just plugged it in and it went to town serving clients and reporting on it's channel in local mode, no problem. My first batch I have two AP's, 3502i's to be exact, plugged in and running on my 5508 with 7.0.98.0 code and and NCS Demo. The AP is up and serving in local mode, however NCS says
CleanAir Management Operation State
Down
I took a look at the WLC and it says:
CleanAir
Oper
Status DOWN
So, why.. and where do I put it UP.
BTW, this AP is connected to a 3750x stack, shouldn't be an issue there...

Look under the network setting in 802.11an and 802.11bgn. There is a CleanAir link... Make sure it is enabled there.
Thanks,
Scott Fella
Sent from my iPhone

Similar Messages

Hi, I've just downloaded the latest release 10.1.1 and now I do not see any more correctly my clips either in the canvas and in the timeline. Playing clips, they now appears with garbled images, completely unstables: I can not editing in these conditions!

Hi, I've just downloaded the latest release 10.1.1 and now I do not see any more correctly my clips either in the canvas and in the timeline. Playing clips, they now appears with garbled images, completely unstables: I can not editing in these conditions!
Anyone can help me?
Thank you, Claudio

Hi Russ, Thank you for your reply!
System Spec:
2x2.26 Ghz QUAD-CORE
12 GB RAM 1066 MHz DDR3
I've stored the library in HARD DISK which is installed inside my computer (1 TB capacity) and different from my hard disk in which I've installed all my applications (600 GB capacity).
I've installed FCP since 2001, bought FCP X in 2012: never had a problem. Yesterday I was editing my video of my last vacations (in California!) and I have updated FCP X, downloading FCP X 10.1.1: then the problem!
Strange is the fact that I've just tried to export a short project, I can see the final product quite well.
What is impossible is playing the clips within Final Cut: they are jumpimg, moving, presenting some frame in green or red ...
Everything all right in iMovie.
I've just checked the RAM: 9GB out of 12 GB is busy, could this be the problem?
Motion is very slow: for 20 sec of project, it takes minutes to play. And once again, if you finalize the projet and export it in Quicktime, you can see it correctly.
I do hope you may suggest something, I'm getting crazy!
Thank you in adavance
Claudio

I'm often having issues with clients not seeing or being able to open attachments, font formatting changes (on the pc end) and the inability to use HTML signatures to promote our company brand.

I'm often having issues with clients not seeing or being able to open attachments, font formatting changes (on the pc end) and the inability to use HTML signatures to promote our company brand.

I imagine your clients must be using Outlook, which is seriously broken when it comes to e-mail standards, especially HTML e-mail. You can work around the issues with Outlook by only sending plain-text e-mails and making sure that, in the Edit -> Attachments menu, the last two options are checked. Unfortunately, that means that HTML signatures are out.
If you need something with a fancy layout, either attach a PDF file to the e-mail or include a link to a website in the e-mail.

I can not see data in data viewer

Hi,
I use OWB 10g Relase 2. I have one table and I imported table metadata to OWB. I load data to table with pl/sql script, Now I do not see data in this table in data viewer. I see data in SQL*PLUS
I tried deploy table and run script to load again. Same problem.
I run mapping from this table. But target object is empty as well.
Thanks for advice
Jerry

my fail, I forgot commit transaction

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

I have just upgrade Itunes (10.6.3.25) and now I can not see my Ipad anymore. before the upgrade it was working fine. I already tried all suggestions from the support page, except re-installing Itunes. any suggestions?

SinluFrank wrote:
already tried all suggestions from the support page, except re-installing Itunes. any suggestions?
Yes. Reinstall iTunes. If that is the point at which you stopped trying the support suggestions then it makes sense to me, that you move on to the next suggestion and if reinstalling iTunes is the next suggestion, so be it.
However .... I too have issues that arise out of the blue with my iPad being recognized in iTunes and what I always do and it eventually works is to quit iTunes, restart my MacBook, and reboot my iPad.
Rebooting the iPad is the last thing that I do and only if I have no success with quitting iTunes and restarting the Mac. It may take a few tries to work, but if you are that dead set against reinstalling iTunes, then give it a try.

I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken. Please help!

I need help proving the date tag on a photo stored in my iPhoto is from the date it was sent to my iphone/date it was imported into iphoto - and that it is NOT the date the photo was actually taken. I recieved a photo via text on my iphone and then I synced my iphone to my macbook and now it is in iphoto. I already know that the date on the photo per the tag that shows up on it in iphoto is NOT the date the photo was actually taken. I need article or literature or something confirming the tag is from when it was sent to the iphone and/or when it was imported. I greatly appreciate some assistance!

All I am trying to do is find something on a forum board or article etc stating that the the date showing in iphoto could be the date it was imported or synced or sent to me and not the actual date taken.
The date on the photo could be anything because you can edit the date with iPhoto or any of 100 apps, free and paid for. So, the date on the photo will prove nothing, I'm afraid.
Regards
TD

Canvio 3TB doing a clicking noise and my pc can not see it any more

My Toshiba HDWC130EK3J1 Stor.E Canvio 3TB doing a clicking noise and my pc can not see it any more.
i am very worried as i have all my familys videos and photos on it for 20 years back in time.
please can somebody help me how to get the stuff out from the hard drive.
Warm regards Birken

Try these suggestions:
How To: Fix USB Problems in Windows 8, Windows 7, and Windows Vista
Unfortunately, if the drive has failed, there isn't going to be an easy way to retrieve the data. It's possible that a data recovery service could help.
- Peter

I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.

I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.

Did you try to change the location in Settings/iTunes & AppStore/AppleID -> view Apple ID, log in ->Country/Region -> India?

Trying to install MS Office 2011 for Mac SP 2 on my Macbook Air (Lion 10.7.3). I have to close Microsoft Database Daemon and SyncServicesAgent but can not see how to do so. I have closed all applications. Can anyone help? Many thanks

Trying to install MS Office 2011 for Mac SP 2 (14.2.0) on my Macbook Air (Lion 10.7.3). I have to close Microsoft Database Daemon and SyncServicesAgent but can not see how to do so. I have closed all applications. Can anyone help? Many thanks

Thanks Kurt! I had tried all that and had tried closing both programmes from the application monitor, but SyncServices Agent refused to close. I tried closing Launchd which is their mother application, but that just caused the screen go go blank. In the end the two programmes let themselves be closed next time I tried the installation process so all was well. Thanks for your help!

I updated to iTunes 10.7 and now iTunes does not see my iPod Touch. It says the Apple Mobile Device USB Driver cannot be installed.

I updated to iTunes 10.7 and now iTunes does not see my iPod touch. After the update I got a message that the Apple Mobile Device USB Driver could not be installed. I have uninstalled and reinstalled iTunes 3 times, but still cannot fix the problem. I have followed the suggested fixes in Apple Support. Any suggestions? Thanks!

Try the actions here for that driver.
iOS: Device not recognized in iTunes for Windows
I would first do this:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

I upgraded to mountain lion and now iMovie dose not see my Canon XHA1 . Can anyone help?

I upgraded to mountain lion and now iMovie dose not see my Canon XHA1 . Can anyone help?

I upgraded from the app store. It is actually quite awhile ago so I do not remember how. I think I used a thumbdrive to create some type of file. No I do not have any backups. My iLife CD is nowhere to be found because this is a very old macbook pro that I've had for a couple years.
Thanks for taking the time to help

Downloaded ios8 to ipad mini and know I do not see my camera icon

DDownloaded ios8 to iPad mini and now i do not see my camera icon

It should be on the top row. If not go to settings> general> restrictions> camera and make sure the button is green.

I am connected to time capsule via wi-fi but air port says not connected and disk utility does not see it

I am connected to time capsule via wi-fi but air port says not connected and disk utility does not see it. I had it connected via ethernet and it still did not see it. Then i disconncectd it from ethernet and did the Wi-fi connection and am able to post this message but air port still does not see it.

Disk Utility will not "see" the Time Capsule, so no need to waste any more time on that issue.
but air port still does not see it.
Not sure what you mean by "air port" here.

I downloaded lightroom mobile...used it for a day and now i can not see any photos... and there is a message that trial days are 0 ...although i have a cloud subsriptiom, i downloaded lightroom mobile...used it for a day and now i can not see any photos..

i downloaded lightroom mobile...used it for a day and now i can not see any photos... and there is a message that trial days are 0 but i have a paid creative cloud sub

Click the arrow in the Identity Plate and be sure that you are signed in. If you are try going to Help and register.

Upgrades to ilife 08 and now I can not see my old albums or photos

Upgrades to ilife 08 and now I can not see my old albums or photos

DO you have any more information? Like did you lose your glasses, turn the monitor off or are you trying to look for the photos via the finder?
If the latter is the case, The basic answer is to export them to a desktop folder and access them from there
for a complete discussion see TD's post here -- http://discussions.apple.com/thread.jspa?threadID=1199193&tstart=15
If it is one of the previous or another one, tell us more about what the problem is -- PLEASE!
Larry Nebel

NCS and 3500 with CleanAir - Not seeing data?

Similar Messages

Maybe you are looking for