NCS antenna and RF prediction problem

so...
we bought a bunch of cisco 3600 series aps with external antennas
went to http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps11983/data_sheet_c78-686782.html
followed the link 802.11n antennas
and choosed the right antenna for our purposes 5dbi omnidirectional 2.4Ghz only
the selection is AIR-ANT2506 3x AP
mounted the access points
connected to the wlc 5508
Then opened Ncs and created a new campus and a new map
positioned aps and...
result? the AIR-ANT2506 is not in the list so the only option is to chose "other"
and .... BAM
Ncs refuses to predict RF coverage cause the antenna is set to "other" and thus not compatible....
THIS IS BAD

Most likely TAC will tell you that your antenna is not supported in the 3600 since the AP requires dual band antennas and the 2506 is 2.4Ghz only.
I would suspect that the 2506 would be supported on a 3500 series access point in NCS since it does not use dual band RP-TNC. The use of that particular antenna with a 3600 seems very odd and possibly a poor choice for that AP. If that antenna is a requirement, RMA your 3600 and save some money and a headache with the 3500.
Sent from Cisco Technical Support iPhone App

Similar Messages

Problems with camera, wifi antenna and battery

where can i get help for my problem?

Hello omarcortes13,
Thanks for contributing to the Apple Support Communities.
It sounds like you are seeing issues with your iPhone 5 camera, wifi antenna and battery. I know it can be frustrating when hardware features are not behaving normally, and I have some resources that can help troubleshoot your iPhone.
You can find some very useful troubleshooting tips for the areas you mentioned at this link:
Get help with hardware features on your iPhone, iPad, and iPod touch - Apple Support
Camera
Camera isn't working or has undesired image quality
Wi-Fi and Bluetooth issues
Issues with Wi-Fi networks and connection
Wi-Fi or Bluetooth settings grayed our or dim
Battery or charging issues
Get help charging your iPhone, iPad, or iPod touch
These links should provide a helpful starting point for troubleshooting. If the links I've mentioned don't resolve the situation, the article above suggests contacting Apple Support for more help.
If you still have an issue with your device, contact Apple Support.
Sincerely,
Jeremy

TS1398 Hi I run the 6.0.2 patch and I stiil have the same problem, no wifi connection even if i change the wireless antenna and the security any ideas??

Hi I run the 6.0.2 patch and I stiil have the same problem, no wifi connection even if i change the wireless antenna and the security any ideas??

There are two steps to the update for an iPhone 5. First you run the patch then you update the iOS. Did you do both? And does iOS 6.0.2 show up in Settings > General > About > Version
The first thing apple will tell you to do if you bring them the phone is to reset the phone. Try that before going any further.
First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

CISCO AP with 2.4GHz antenna now having throughput problem

Hi all expert,
Current i'm having problem with my AP running with WLC. For example, 1 AP in a room with 30 users, they are having throughput/slow connection problem.
Just want to know, if we dun add another AP but instead add-in 5GHz antenna, will it improve the conectivity or it will be the same ?? If there is other solution that incur lower cost will be helpful as well..
Regards,
DericT

i'll need to test it out 1st .. definitely its older model AP with only FE .. Hopefully with 5Ghz antenna will solve the problem.
Mmmmmm ... Not it won't. You just might make it alot worst.
Think about it before throwing good money: 2.4Ghz is low speed but long range (check!). You have 30 clients all going to ONE AP over a FastEthernet connection (check!). Next, due to the overwhelming amount of client traffic resposes slow down (check!). Next you want to put all the clients into 5.0 Ghz radio but still on a FastEthernet link, which is HIGH speed but short range.
Still doesn't make sense?
Try this: Think of the situation as driving along a narrow, pot-holed riddled dirt road with your, say, VW Golf. Your intention is to run this strech at high speed while carrying the entire football team behind you. Your solution is to remove the VW Golf engine and stick the engine of a Caterpillar D10T under the hood/bonnet. (How the heck you'll be able to fit the monster in is a marvel of technology by itself!)

How do I Help Apple Care Stop Warring with Each Other and Fix the Problem with My iPhone that They Acknowledge Creating?

How Do I Help Apple US & Apple Europe Stop Warring With Each Other And Fix The Problem They Created?
PROBLEM
Apple will not replace, as promised, the iPhone 5 (A1429 GSM model) that they gave me in London, UK, with an iPhone 5 (A1429 CDMA model).
BACKGROUND
My iPhone 5 (A1429 CDMA model) was purchased this year in September on an existing Verizon Wireless (VZW) line using an upgrade. The purchase took place in California and the product was picked up using Apple Personal Pickup through the Cerritos Apple Retail Store. I will refer to this phone at my "original" phone.
The original phone was taken into the Apple Store Regent Street in London, England, UK on November 15, 2012. The reason for this visit was that my original phone's camera would not focus.
The Apple Store Regent Street verified there was a hardware problem but was unable to replace the part.
The Apple Store Regent Street had me call the US AppleCare. At first they denied support, but then a supervisor, name can be provided upon request, approved the replacement of my original phone with an iPhone 5 (A1429 GSM model) as a temporary solution until I got back in the US. And approved that the GSM model would be replaced with a CDMA model when I came back to the US. I will refer to the GSM model as the "replacement". They gave me the case number --------.
The Apple Store Regent Street gave me the replacement and took the original. The first replacement did not work for reasons I do not understand. They switched out the replacement several times until they got one that worked on the T-Mobile nano SIM card that I had purchased in England, UK. Please refer to the repair IDs below to track the progression of phones given to me at the Apple Store Regent Street:
Repair ID ----------- (Nov 15)
Repair ID ----------- (Nov 16)
Repair ID ----------- (Nov 16)
The following case number was either created in the UK or France between November 15 to November 24. Case number -----------
On November 19, 2012, I went to France and purchased an Orange nano SIM card. The phone would not activate like the first two repair IDs above.
On November 24, 2012, I went to the Apple Store Les Quatre Temps. The Genius told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. They had me call the AppleCare UK.
My issue was escalated to a tier 2 UK AppleCare agent. His contact information can be provided upon request. He gave me the case number -----------.
The UK tier 2 agent became upset when he heard that I was calling from France and that the France Apple Store or France AppleCare were not helping me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault.
The UK tier 2 agent said he was working with engineers to resolve my problem and would call me back the next day on November 25, 2012.
While at the Apple Store Les Quatre Temps, a Genius switched the phone given to from repair ID ----------- with a new one that worked with the French nano SIM card.
Also, while at the Apple Store Les Quatre Temps, I initiated a call with AppleCare US to get assistance because it seems that AppleCare UK was more upset that France was not addressing the issue rather than helping me. I have email correspondance with the AppleCare US representative.
A Genius at the Apple Store Les Quatre Temps switched the replacement with a new GSM model that worked on the French SIM card but would not work if restored, received a software update, or had the SIM card changed. This is the same temporary solution I received from the Apple Store Regent Street in the UK.
By this point, I had spent between 12-14 hours in Apple Store or on the phone with an AppleCare representative.
Upon arriving in the US, I went to my local Apple Store Brea Mall to have the replacement switched with a CDMA model. They could not support me. He told me that my CDMA phone should not have been replaced with a GSM model in the UK and that this was clearly Apple's fault. My instructions were to call AppleCare US again.
My call with AppleCare US was escalated to a Senior Advisor, name can be provided upon request, and they gave me the case number -----------. After being on the phone with him for over an hour, his instructions were to call the Apple Store Regent Street and tell them to review my latest notes. They were to process a refund for a full retail priced iPhone 5 64BG black onto my credit card so that I could use that money to buy a new iPhone 5 64GB black at the Apple Store Brea Mall to reoslve the problem.
The Apple Store Regent Street did not process my refund. He, name can be provided upon request, told me that the AppleCare US did not do a good job reviewing my case, that they were incapable of getting to the bottom of it like they were, and instructed me to call AppleCare US and tell them to review this case number and this repair id. I asked if he read the notes from the AppleCare US Senior Advisor and he would not confirm nor deny. When I offered to give him the case number he accepted but it seemed like would do no good. Our call was disconnected. When I tried calling back the stores automated system was turned on and I could not get back through.
Now I have the full retail price of an iPhone 5 64GB black CDMA on my credit card and Apple will not process the refund as they said they would.
I've, at this point, spent between 14-16 hours at Apple Stores or on the phone with AppleCare representatives, and still do not have the problem resolved.
SOLUTION
AppleCare US and AppleCare Europe need to resolve their internal family issues without further impacting their customers.
Apple is to process a refund to my credit card for the cost of a full retail priced iPhone 5 64GB black.
DESIRED OUTCOMES
I have an iPhone 5 (A1429 CDMA model) that works in the US on VZW as it did before I received the replacement phone in the UK.
Apple covers the cost of the solution because I did not create the problem.
Apple resolves their internal issue without costing me more time, energy, or money.
This becomes a case study for AppleCare so that future customers are not impacted like I have been by their support system.
Does anyone have recommendations for me?
Thank you!
<Edited by Host>

Thanks, but I've been on the phone with AppleCare US (where I am and live) and AppleCare UK. They continue bouncing me back and forth without helping resolve the problem.
Perhaps someones knows how to further escalate the issue at Apple?

Remote Control and Remote View Problem

Hi,
I work at a High School running Netware 6.0 SP5 and Zen works 4.01 ir7.
Remote Control and Remote View works great but I noticed one problem.
We have a logo of the school that is forced down on to the desktop when a
user logs in through group policies. This logo works perfect for the
desktop wall paper and loads every time a user logs in.
When I Remote Control or Remote View a computer the users desktop wall
paper turns from the logo being forced down through group policies to the
desktop to a blue desktop wall paper.
I would prefer the desktop wall paper staying the schools logo when I
Remote Control or Remote View because if the desktop wall paper changes to
the blue color I mentioned above when I Remote Control or Remote View the
users computer, they will know that someone is taking over their computer
which sometimes we dont want them knowing.
We have Windows 98SE computer running Novell Client 3.4 and we have some
computers running Windows XP Professional SP1 and Windows XP Professional
SP2 both running Novell Client 4.91 SP2.
The Remote Control and Remote View problem of the desktop wall paper
changing on the users computer occurs on all operating systems mentioned
above.
Is there a solution to my above problem? When Remote Controlling and
Remote Viewing someone's computer I don't want the desktop wall paper to
change.
Thanks!

Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

A720 and windows 8 problems

Im trying to setup the a720 with windows 8 and have this problems: When power off the computer have all time this BSOD : SESSION_HAS_VALID_POOL_ON_EXIT Touchscreen not work.
If I run the windows 8 install, just for test, the touch is working, the problem is after install.
External hard disk not working when connect to any USB port, and unplug result in a system freeze.
Here my mini dump for error SESSION_HAS_VALID_POOL_ON_EXIT, I have the i5 model too and this not happen on that model:
Crash Dump Analysis provided by OSR Open Systems Resources, Inc. (http://www.osr.com) Online Crash Dump Analysis Service See http://www.osronline.com for more information Windows 8 Kernel Version 9200 MP (8 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 9200.16384.amd64fre.win8_rtm.120725-1247 Machine Name: Kernel base = 0xfffff800`60081000 PsLoadedModuleList = 0xfffff800`6034ba60 Debug session time: Wed Nov 28 17:08:03.203 2012 (UTC - 5:00) System Uptime: 0 days 0:00:13.897 ******************************************************************************* * * * Bugcheck Analysis * * * *******************************************************************************
SESSION_HAS_VALID_POOL_ON_EXIT (ab) Caused by a session driver not freeing its pool allocations prior to a session unload. This indicates a bug in win32k.sys, atmfd.dll, rdpdd.dll or a video driver. Arguments: Arg1: 0000000000000001, session ID Arg2: 00000000000000f0, number of paged pool bytes that are leaking Arg3: 0000000000000000, number of nonpaged pool bytes that are leaking Arg4: 0000000000000001, total number of paged and nonpaged allocations that are leaking. nonpaged allocations are in the upper half of this word, paged allocations are in the lower half of this word.
Debugging Details: ------------------
TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0xAB
PROCESS_NAME: csrss.exe
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff80060680506 to fffff800600fc040
STACK_TEXT: fffff880`05d059b8 fffff800`60680506 : 00000000`000000ab 00000000`00000001 00000000`000000f0 00000000`00000000 : nt!KeBugCheckEx fffff880`05d059c0 fffff800`603e8bb5 : fffff880`04983b40 00000000`00000000 fffff880`04983000 ffffffff`ffffffe6 : nt! ?? ::NNGAKEGL::`string'+0x36216 fffff880`05d05a10 fffff800`604a48b6 : 00000000`00000372 fffff880`04983000 fffffa80`090203c0 fffffa80`08fc4540 : nt!MiDereferenceSessionFinal+0xf1 fffff880`05d05a80 fffff800`604abe68 : fffff8a0`00142b00 00000000`00000000 00000000`00000001 00000000`00000001 : nt!MmCleanProcessAddressSpace+0x2be fffff880`05d05af0 fffff800`604ac55e : fffffa80`00000000 00000002`00000001 00000000`00000000 fffff8a0`00d0b8f0 : nt!PspExitThread+0x668 fffff880`05d05c10 fffff800`600e1dd6 : fffff800`60377180 00000000`00000080 fffffa80`090203c0 fffffa80`08fc4540 : nt!PspTerminateThreadByPointer+0x4e fffff880`05d05c60 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP: nt! ?? ::NNGAKEGL::`string'+36216 fffff800`60680506 cc int 3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt! ?? ::NNGAKEGL::`string'+36216
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 5010ac4b
FAILURE_BUCKET_ID: X64_0xAB_nt!_??_::NNGAKEGL::_string_+36216
BUCKET_ID: X64_0xAB_nt!_??_::NNGAKEGL::_string_+36216
Followup: MachineOwner ---------

Ok, the problem is generated by NVIDIA VIDEO DRIVER!
Honesty I cant understand why LENOVO not choose for this machines a ivibridge CPU with HD4000 VIDEO, performance is similar, and Intel VIDEOS GPU, have 0 troubles, ATI AND NVIDIA always are very problematic.
Anyway the solution is simple:
1 Turn OFF windows update, or change to selective install.
This prevent win update install NVIDIA driver in automatic way.
2 Uninstall NVIDIA driver sand NVIDIA related stuff.
3 Restart the machine, NOT POWER OFF, just restart.
4 Now go to SYSTEM PROPERTIES > HARDWARE > DEVICE MANAGER
INSIDE DISPLAY ADPATER NOW SELECT DISABLE THE DEFAULT VGA DRIVER, NOR UNINSTALL CHOOSE DISABLE!
NOW RESTART.
After restart now touchscreen work correctly, and next time you power off the machine, not have that ugly error all time.
This not is a final solution is just a workaround until LENOVO/NVIDIA provide a final fix for this.

My 2009 macbookpro has begun running very slowly, apps freeze and pages hang ... i've run EtreCheck and there are problems but don't know how to sort

my 2009 macbookpro has begun running very slowly, apps freeze and pages hang ... i've run EtreCheck and there are problems but don't know how to sort ... ran CleanMyMac and freed up about 30GB of space but didn't help ... ran AdwareMedic so that's been sorted but the other issues that came up on the EtreCheck I need help with however i can't figure out how to paste the results on this page

thanks thomas ... here it comes
EtreCheck version: 2.1.5 (108)
Report generated December 29, 2014 at 5:03:07 PM GMT
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
    MacBook Pro (17-inch, Early 2009) (Verified)
    MacBook Pro - model: MacBookPro5,2
    1 2.66 GHz Intel Core 2 Duo CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1067 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1067 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    NVIDIA GeForce 9400M - VRAM: 256 MB
        Color LCD 1920 x 1200
    NVIDIA GeForce 9600M GT - VRAM: 512 MB
System Software: ℹ️
    OS X 10.9.5 (13F34) - Uptime: 0:5:36
Disk Information: ℹ️
    FUJITSU MHZ2320BH FFS G1 disk0 : (320.07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        [redacted]'s world too (disk0s2) / : 319.21 GB (30.39 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    MATSHITADVD-R   UJ-868
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple Inc. iPhone
    Logitech USB Receiver
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple, Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
Configuration files: ℹ️
    /etc/hosts - Count: 29 - Corrupt!
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Application Support/Roxio
    [not loaded]    com.roxio.TDIXController (1.7) [Support]
        /System/Library/Extensions
    [not loaded]    com.kensington.mouseworks.iokit.KensingtonMouseDriver (3.0) [Support]
        /System/Library/Extensions/KensingtonMouseDriver.kext/Contents/PlugIns
    [not loaded]    com.kensington.mouseworks.driver.ADBID32Mouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.ADBID32MouseX1 (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.ADBID4Mouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.ADBID4MouseX1 (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.KMWBluetoothHIDMouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.KMWBluetoothOldHIDMouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.KMWUSBHIDMouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.USBMouseX1 (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.VirtualMouse (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.driver.VirtualMouseX1 (3.0) [Support]
    [not loaded]    com.kensington.mouseworks.iokit.KensingtonMouseDriverX1 (3.0) [Support]
Startup Items: ℹ️
    AdobeVersionCueCS2: Path: /Library/StartupItems/AdobeVersionCueCS2
    Firewall: Path: /Library/StartupItems/Firewall
    RetroRun: Path: /Library/StartupItems/RetroRun
    Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Support]
    [loaded]    com.adobe.CS4ServiceManager.plist [Support]
    [loaded]    com.adobe.CS5ServiceManager.plist [Support]
    [invalid?]    com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Support]
    [invalid?]    com.adobe.SwitchBoard.plist [Support]
    [loaded]    com.adobe.versioncueCS3.plist [Support]
    [loaded]    com.adobe.versioncueCS4.plist [Support]
    [running]    com.atomicbird.macaroni.launchd.plist [Support]
    [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Support]
    [invalid?]    com.oracle.java.Helper-Tool.plist [Support]
    [loaded]    com.prosofteng.DriveGenius.locum.plist [Support]
    [loaded]    com.skype.skypeinstaller.plist [Support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Support]
    [loaded]    com.adobe.ARM.[...].plist [Support]
    [loaded]    com.adobe.ARM.[...].plist [Support]
    [loaded]    com.google.keystone.agent.plist [Support]
    [loaded]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
    [loaded]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
    [loaded]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
    [running]    com.prosofteng.DGMonitor.plist [Support]
    [running]    ws.agile.1PasswordAgent.plist [Support]
User Login Items: ℹ️
    CNQL1210_ButtonManager    ApplicationHidden (/Library/CFMSupport/CNQL1210_ButtonManager.app)
    System Events    ApplicationHidden (/System/Library/CoreServices/System Events.app)
    Mail    Application (/Applications/Mail.app)
    Firefox    Application (/Applications/Firefox.app)
    AdobeResourceSynchronizer    ApplicationHidden (/Applications/Adobe Reader 9/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Calendar    Application (/Applications/Calendar.app)
    Skype    Application (/Applications/Skype.app)
    Dropbox    Application (/Applications/Dropbox.app)
    AdobeResourceSynchronizer    ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    MouseWorks Background    Application (/Library/Application Support/Kensington/MouseWorks.prefPane/Contents/Resources/Support/MouseWorks Background.app)
Internet Plug-ins: ℹ️
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
    Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
    EPPEX Plugin: Version: 3.0.0.0 [Support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
    ContentUploaderPlugin: Version: 1.2 [Support]
    iPhotoPhotocast: Version: 7.0
    RealPlayer Plugin: Version: Unknown [Support]
    PDEPrint: Version: 2.0 [Support]
    DirectorShockwave: Version: 11.5.2r602 [Support]
    PDF Browser Plugin: Version: 2.4.2 - SDK 10.2 [Support]
    FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
    QuickTime Plugin: Version: 7.7.3
    CANONiMAGEGATEWAYDL: Version: 3.0.0.2 [Support]
    DivXBrowserPlugin: Version: 1.3 [Support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
    Google Earth Web Plug-in: Version: 6.0 [Support]
    Default Browser: Version: 537 - SDK 10.9
    Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Support]
    JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
    OfficeLiveBrowserPlugin: Version: 12.3.6 [Support]
User internet Plug-ins: ℹ️
    QuickTime Plugin: Version: 6.5.1
    fbplugin_1_0_0: Version: Unknown [Support]
Safari Extensions: ℹ️
    Ultimate [Installed]
3rd Party Preference Panes: ℹ️
    ASM [Support]
    DivX [Support]
    Flash Player [Support]
    Flip4Mac WMV [Support]
    Macaroni [Support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Destinations:
        G-DRIVE Mini [Local]
        Total size: 999.86 GB
        Total number of backups: 7
        Oldest backup: 2014-07-09 00:13:07 +0000
        Last backup: 2014-12-10 22:18:57 +0000
        Size of backup disk: Excellent
            Backup size 999.86 GB > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
         6%    WindowServer
         3%    firefox
         1%    mds_stores
         0%    mdworker
         0%    Skype
Top Processes by Memory: ℹ️
    348 MB    firefox
    137 MB    Skype
    122 MB    mds_stores
    120 MB    com.apple.IconServicesAgent
    73 MB    Dropbox
Virtual Memory Information: ℹ️
    1.26 GB    Free RAM
    1.74 GB    Active RAM
    477 MB    Inactive RAM
    543 MB    Wired RAM
    503 MB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Dec 29, 2014, 04:58:09 PM    Self test - passed
    Dec 29, 2014, 10:58:04 AM    /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105804_[redacted].hang
    Dec 29, 2014, 10:54:33 AM    /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105433_[redacted].hang
    Dec 29, 2014, 10:52:33 AM    /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105233_[redacted].hang
    Dec 29, 2014, 10:50:24 AM    /Library/Logs/DiagnosticReports/Keychain Access_2014-12-29-105024_[redacted].hang
    Dec 29, 2014, 10:50:24 AM    /Library/Logs/DiagnosticReports/Skype_2014-12-29-105024_[redacted].hang

Here. Hi I buy pack but the problem is you already purchased in-app purchased but it hasn't been downloaded pls fix it for me and I buy before 15 days pack 19,99 and 4,99 and the same problem in game world strike

Hi I buy pack but the problem is you already purchased in-app purchased but it hasn't been downloaded pls fix it for me and I buy before 15 days pack 19,99 and 4,99 and the same problem want or were can I fit it pls

The e-mail for World Strike support is: [email protected]
You need to contact them with your questions.

PHP and MySQL Connection problem

I am trying to make a PHP MySQL on a remote server connection in Dreamwesaver CS3.
When I enter the information (host, user, password, etc.) and hit TEST, I get the following error message.
"Access Denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured."
I know the user, password, etc. work, as I can access the MySQL database with other software.
I checked with my host and they say there are no permission problems on their end.
I have checked the settings on the Test Server page in Site Setup and everything looks correct and works there.
I have not seen this particular problem described in other forum postings (although there are a LOT of postings on this topic!).
Any help would be appreciated.

I thought my testing server was the remote server and is always on as far as I know. I don't know how to turn it on or off.
Is there some other testing server that I should be aware of?
Frank
Date: Wed, 3 Jun 2009 15:43:02 -0600
From: [email protected]
To: [email protected]
Subject: PHP and MySQL Connection problem
I know you are using remote, but is your testing server on? if not turn that on and see if that does it. it just happened to me working on remote server and could not get mysql conn to work, until I turn on my testing (developer server), then I was able to connect to mysql and the tables that I created in phpmyadmin remotly was downloaded.
>

Many syncing and e-mail problems.

Hi folks, lots of syncing and e-mail problems here:
Syncing: My phone won't sync iCal (it tells me my phone is disconnected), my safari bookmarks or my email accounts. I've been through the threads here, tried resetting iSync, tried deleting calendars and resetting to 10 days instead of 30 -- still no luck. For e-mail, initially iTunes saw the e-mail accounts but did not sync theml. I tried the one-time advance settings and now it's not even seeing the accounts and still not syncing them. and for Safari, no luck with the bookmarks at all even thought the check-box is checked.
Also, the iPhone won't receive e-mail from any of my POP accounts, even the one I set by hand (because none of the settings synced.) I used the same settings that I have on my desktop, but no luck. I use RoadRunner, so I know I can't send off it. But I went to the genius bar today and they told me to just leave the SMTP server field blank and I should be able to receive, but all I get on wi-fi and edge is a message that says, "Cannot Get Mail, the connection to the server "pop-xxxxxx etc" failed." even on my home netowrk, with five bars, it can't seem to connect. (btw, it does seem to be working properly on my .Mac account, but I don't use that account for most of my correspondence.)
As far as the sync problems, the genius bar told me to reinstall iTunes, which I did with the new update that just came out this evening. Still no luck.
any thoughts? bum phone? some setting I'm not catching? any help would be appreciated.
Dave
Quad G5 Mac OS X (10.4.2)

You will find the iPhone will freak out over any kind of perceived data corruption. Calendars seem to the worst for this (windows or mac)
Test in a new user and try sending info in each direction. If it works - then your phone works fine.
Other users have reported having to basically copy the contents of their calendars into a sticky or text edit window. delete the calendars and create brand new ones. they then just transfer the data back.

Hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem

hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem, is this a bug?
thanks for any reply.
Rosone

It is not a bug, you might be using IE in Windows server 2012 and and browser might be restricting your site actions to respond properly.
Check this in a different browser or access site in a differ OS.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.

I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me

I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me

I'm going to guess videos buffer for a while also...
Two possibilities, one is you should close apps on the iPad, the other is your internet speed is not able to handle the demands of a high speed device.
To close apps: Double click home button, swipe up to close the apps.
To solve internet problem, contact your provider. Basic internet is not enough for video games and movies. Your router may be old and slow.

I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or atleast maintain the charg over longer periods of time? I have a dc adapter. thanks

I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or at least maintain the charge over longer periods of time? I have a dc adapter. thanks

You should be able to use the battery if you get a car type charger which recharges mobile devices.
The full size iPads use a 10-12W charger, whereas the mini uses a 5W charger. Many car chargers only supply 5W. But at 5W, the car charger should give you some extra time on your iPad. It would be best to use a 10-12W car charger.
 Cheers, Tom

Acrobat Pro 6 Average Daily Production and Math.round problem

Acrobat Pro 6 Average Daily Production and Math.round problem
(Production.0) (154) (whole units) . (Production.1) (90) (fractional) / (divided by) 31 (days) results in (Average.0) (4)(whole units) . (Average.1) (10) (fractional) using :Math.round.� Noticed that 154 (whole units) . 85 through 99 (fractional) also show 4.10. (without Math.round : 5.00)
Method:
�Production.0� (whole units) . �Production .1� (fractional) / Days = (Average Daily Production) (�Average.0� (whole units) . (Average.1) (fractional)
� Production.0 (value not calculated)�, � Production 1 (calculated) (event.value = util.printx("0099", (event.value)).substr(-2,2); � �Average.0 (value not calculate)�, and �Average.1 has following calculation:
var punits = this.getField("Production.0");
var pfrac = this.getField("Production.1");
var average = 0.0;
average = (punits.value + pfrac.value / 100) / this.getField("Days").value;
this.getField("Average.0").value = average - average % 1;
this.getField("Average.1").value = util.printx("0099", Math.round((average % 1 * 100))).substr(-2,2);
�Math.round� appears to be a problem. Also, could you explain the purpose of �0099� . Anyway, why would 154.85 through 154.90 divided by 31 give 4,10. Also, their must be a better way, to find the average daily production. All you have to do is divided the production (whole. fractional) by the days, and display the average daily production as (whole. fractional). Any suggestions??

There are a many loose ends in your question.
First, I have never seen before a variable type called 'var'. Is it a java primitive or a class?
Next, I cannot seem to find any class that has the printx method.
When it comes to substr(-2,2), I get confused. First, I thought that it was a method of the String class, but I only got as far as substring(beginIndex, endIndex).
If you really must break the production and average into pieces, try this:
float average = (punits + pfrac/100) / days;
int avg_units = (int)average;
int avg_frac = (int)( (average - avg_units) * 100 );My guess is that util.printx("0099", x) formats x having two optional digits and two mandatory digits, showing 0-99 as 00-99, but allows to show numbers with three and four digits.
154.85/31 = 4,9951612903225806451612903225806
154.99/31= 4,9996774193548387096774193548387
If you round the fraction of theese numbers multiplied by 100 ( = 99.51.. and 99.968...) you get 100, and this will be the output of printx. My guess for "4.10" is that substr(-2,2) returns the two first characters of the string, because the start index should not be zero. (According to java docs, substring throws an exception on a negative index, so what kind of class are you really using ??????)

NCS antenna and RF prediction problem

Similar Messages

Maybe you are looking for