NCS Appliance Ver 1.1.1.24 VM High availability disk options

Hello,
I currently am running an NCS appliance running version 1.1.1.24. I am looking to set up a VM server as a redundant High Availability backup server. Per the config guides the VM server needs to be set up with identical physical specifications as the appliance. That means I will need to set a vm up with the following specs:
CPU: 2 x Intel Xeon Processor (2.4-GHz 12-MB Cache)
•Memory: 16-GB (1×2-GB, 2Rx8) PC3-10600 CL9 ECC DDR3
•Network Interface Cards: 2 x 10/100/1000 Gigabit
The config guide for the VM recommends that I start with a minimum 400Gb disk space. Does anyone have experience deploying a VM as a backup for an appliance? Does this sound correct?
Thanks,

Similar Messages

Cisco Prime NCS appliance & license

Hi all,
I'm looking for getting a Cisco prime NCS appliance (PRIME-NCS-APL-K9). I'm a little bit confused regarding to the license scheme:
1. Does the appliance has any license coming with it or we need to order the license separately?
2. If I have an WLC 5508 (license support 12 APs) & 12 3500 APs, then number of devices counted will be 1 (WLC) or 12 (APs) or 13 (WLC + APs) ?
Thanks for the help,

Cisco Prime Infrastructure for the first time you may access the lifecycle and assurance features using the built-in evaluation license that is available by default. The default evaluation license is valid for 60 days for 100 devices and 150 interfaces. You will need to purchase the base license and the corresponding feature license before the evaluation license expires. Cisco Prime Infrastructure 1.2 can be ordered using the standard Cisco® ordering tools at http://www.cisco.com/go/ordering. More information about getting the license files can be found in the Cisco Prime Infrastructure 1.2 Ordering and Licensing Guide

Rsync on NCS appliance

Hello
we used to run WCS as a software application on a Linux platform and saved all our daily Client Session reports on the disk and then used rsync to grab the details and process them off line.
We have recently bought an NCS appliance and do not seem to be able to get rsync to work and at the moment are using FTP to grab each individual file.
Is there a way to use rsync on an NCS appliance that anyone knows of?
thanks
Bryn

Change the state of logging..
You will probably have to apply and restart the TC to get it to start logging at debug level.
But this is already telling you something.
Dec 28 09:59:42
严重性：5
(WAN) link state is Up.
Dec 28 10:12:26
严重性：5
(WAN) link state is Up.
I do not have one message in the log for several days suggesting a drop of link..
Dec 28 10:06:47
严重性：5
AFP login OK from 刘一新@192.168.1.104.
Dec 28 10:12:27
严重性：5
AFP login OK from 刘一新@192.168.1.104.
Your login lasted 6min.. that is not right, unless you deliberately disconnected..
Although the TC hasn't given any indication of a drop it is telling you it is redoing the login.. for no good reason.
The drop in WAN particularly suggests something is going wrong.
Anyhow it gives you indication all is not well.
I would suggest you use another router and try using the TC bridged.
Or use the TC totally off the network with a separate ethernet connection to the computer you are copying files from.
Turn off ipv6 in the computer as that is also doing you no good.

NCS Appliance Installation Issue

Hi Everyone
Here is my situation:
My client has purchased the NCS appliance to manage WLC and other APs. However, after upgrading the IOS of WLC, the NCS appliance couldn't manage the WLC. So when we knew the NCS can directly upgrade to PI 1.3, we have done it successfully. That sounds greate and everything goes well. A few weeks ago, my client said that they couldn't use the PI. And then we found the drives(0 and 1) couldn't work and saw the bad status of them from appliance webios. So we claimed RMA from Cisco, then we downloaded the .ISO(NCS-APL-1.3.0.20-1-K9.iso) and burned into DVD(D9, 8.5G) to reinstall the OS. Then installing it, we got an error message as the below attachment. I have tried to burn the ISO into another DVD, it yet can't work. I made sure the the ISO is correct and entire, the process of buring DVD is also correct because I have used it to install the system on my PC. So is it necessary to find the old NCS appliance ISO file to burn and then upgrade to PI? If so, there is no more about physical iso link to donwload in Cisco website, just virtual ova files. Pls for you advices, thx in advance!

What OS did you deploy to the T450s?

NCS Licensing in High Availability

We are transitioning from a single WCS to NCS, and are looking at high-availability and the costs associated with it. How does the licensing work if you want a NCS high availability environment? If you have a 10,000 device license on your primary, do you have to buy an additional 10,000 license for the secondary as well? Or are they pooled?

A single license is necessary for a given HA cluster - please note the answer in this thread.

Teaming or Port-channel support on NCS appliance

Hi, we have purchased one NCS PRIME-NCS-APL-K9 appliance. We are looking at connecting this box to two more swicthes configured in HSRP for the VLAN on which this box will be place. Can i configure active/stand-by teaming of both the ethernet ports available on this box.
If its possible, can you share with the relevant link on the Cisco website for the same.
Thanks in advance!

Have you gotten an answer to this question from any other source? Trying to find the same answer for a client.
Scott

NCS Prime Ver 1.0.2.29

Hi All,
Does anyone have any idea is this is a bug or not? I am trying to access Monitor>Clients and Users on NCS.
The error message received is There was an error while parsing and rendering the content. (Tried to register widget with id==clientTable_xwtTableGlobalToolbar_settingsMenu but that id is already registered)
Thanks in advance for your reply Jason

There's a new bug out there,
CSCui77571 PI: Chrome upgrade to Version 29.0.1547.57 m causes error
that's behind this. From the Release Note of the bug
"Symptom: "There was an error while parsing and rendering the content. (Object # has no method 'getAttribute')" errors in Jobs Dashboard, Configure > Access Points > Choose AP, Clients and Users and the inability to change from Lifecycle to Classic View. Device work center can also throw the error: "There was an error while parsing and rendering the content. (Tried to register widget with id==dGroupOS but that id is already registered)"
Conditions: Upgrading Chrome to Version 29.0.1547.57 m
Workaround: Firefox seems to work."
Work is being done on a patch, should be available in the next couple of days.

NCS appliance upgrade 1.1.1.24 - 1.3

Tyring to upgrade NCS as below and it fails with the error "% One or more required RPM's not found in the bundle"
/admin# application upgrade PI-upgrade-bundle-1.3.0.20.tar.gz FTP
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
Stage 1 of 7: Transferring file ...
-- complete.
Stage 2 of 7: Unpacking file ...
-- complete.
% One or more required RPM's not found in the bundle
Version information of installed applications
Cisco Prime Network Control System
Version : 1.1.1.24
Any help would be appreciated
Brendan

kindly check the following link for the reference (Prime upgrade)
https://supportforums.cisco.com/docs/DOC-36703
http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/2.0/release/notes/cpi_rn.pdf

Is a 64-bit Linux RDBMS appliance on a Windows 7 64 bit host available?

I have Cloudera Hadoop running with no issues. All I have are 32-bit Oracle Linux environments. It appears I need a 64-bit Oracle environment to install the connector because it has to have Hadoop installed atop of it.
It there a 64-bit Oracle Linux virtual box or VM appliance for a Windows 7 64 host that I can use for testing? Even better, one that has the HADOOP connector and SQL Loader already installed?
Rob

We are planning a VM that will have 64 bit Linux with single node Hadoop, connectors and a database. I will post a note when it is available.
Meanwhile, it is straightforward to have a 64 bit Oracle Database install and then add the Hadoop client that one of the connectors needs. The connectors documentation points to instructions for installing the Hadoop client.

NCS High Availability, Database does not sync

Hi All, i have a setup with NCS 1.1 in a HA Environment. The initial Syncing tooks Place. Since then i added Templates, Maps and so on. Now i tested Failover. The Server comes up, logging in possible. Controllers and AP are available, but no Configuration Template or Campus or Map. As the NCS Config Guide promised, syncing should be done automatically. Is there a way to check the synchronisation or have i something forgotten to deploy? Any Hint or Experience?
TiA, Michael

Mike:
I don't think that templates are being copied! as per the guide:
The following files are copied over from the primary to the secondary NCS:•DB password file•all auto provisioning startup config files•all domain maps•all history reports which are generated by scheduled report tasks
Reference: http://www.cisco.com/en/US/docs/wireless/ncs/1.0/configuration/guide/admin.html#wp1178663

LMS Ver 4.0.1 unable to set error count options

I have a recent new install of Cisco Works and all is working fine. My issue is with a feature that doesn't seem to be present. When I create a report to ccheck on sys logs the report returns all sys log whether they are repetitive or not. Is there a way to have a same sys log error come back with a number of ocurences?
the feature doesn't show up when I create a custom report?
thanks Yvon

Thanks Gaganjeet! I was hoping for a report that would give me for example env-mon syslog and the number of occurences but if this is the only way I will have to live with it.
appreciate the response.
Yvon

Ver 1.2/1X-4X discs will not record in DVD recorder. Ver 1.1/2X were Ok. Cn new disks be fmt to wk?

Is there a way to reformat the 4X disks to work on older DVD recorders still working?

Is there a way to reformat the 4X disks to work on older DVD recorders still working?

Prime infrastructure 1.3 / 2.0 - LMS 4.2 and NCS PI coexist on one physical appliance?

I would like to purchase the physical appliance the serves both LMS/NCS. Is this possible on the NCS appliance running 1.3 or is this only available on a 2.0 appliance. If so any documentation supporting this would be appreciated..
Sent from Cisco Technical Support iPad App

You can't run two systems on an appliance. An appliance allows only one OS to run at a given time. PI and LMS need to be ran on a separate VM'swhich can be on the same VM host, but are individual virtual machines.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Server 2012 RS Multiple RDS Collections equals only one application from one collection at a time

Hello all!
We have a 2012 R2 RDS "farm" configured like this:
2 RD Web Access servers (load balanced behind KEMP appliances)
2 RD Connection Brokers in a High Availability configuration
8 RD Session Host servers (no VDI) in 2 different collections
I've noticed that if I have rights / visibility to different applications in both collections I can only run one of the applications at a time. For instance:
Collection A has application 1
COllection B has application 2
What i'm experienceing now is that if i have rights to app 1 and app 2 i can only use one at a time. If i attemp to run app 2 while i have app 1 open I get this message:
"Windows cannot start the RemoteApp program. The following RemoteApp program is not in the list of authorized programs: app 1"
Maybe my thinking is incorrect and you cannot cross boundries from one collection to the other. Maybe i need one collection with all my host and segregate applications via AD permissions. Any thoughts?

Hi,
Please make sure the client PC has mstsc.exe 6.3.9600 (RDP 8.1) or later.
From your description it sounds as though it is attempting to connect to the wrong collection when you launch the RemoteApp for the second collection. This can be caused by older client version and/or your load balancing configuration. You should
load balance the initial connections to the broker, but not use a load balancer for the connections to the RDSH servers, unless you have a specific need to. The RD Connection Brokers will handle the load balancing for the RDSH servers.
Thanks.
-TP

Cisco Prime LMS appliance Compatibilty with Cisco Prime NCS

Hi,
Is it possible if we can install Cisco Prime LMS 4.2 in the appliance which is inbuilt with Cisco Prime NCS .
We have PILMS42-1.5K-U license available with us.
Rgds,
Kamal

One can install either LMS 4.2 or NCS on the a physical (software on PRIME-NCS-APL-K9 hardware) or virtual appliance (software installed on customer-provided VM).
The two products (NCS and LMS) cannot coexist on a given appliance instance. This is due to change in the future as LMS and NCS merge under the Cisco Prime Infrastructure 2.0 release but for now they are distinct and separate products with a common approach and similar look and feel but requiring separate servers, whether physical or virtual.
Please refer to the ordering and licensing guide here.

NCS Appliance Ver 1.1.1.24 VM High availability disk options

Similar Messages

Maybe you are looking for