NCS Prime 2.1 Percentage of Licenses used on WLC2504

Is there an exportable report that can be run on NCS Prime Infra 2.1 that will provide an AP count percentage of licenses used for each controller?
Attached is a screen shot of a visual of what I want in an exportable excel file for WLCs.

Thank you, however, I need to export information that will tell me the percentage of licenses used of the total by each WLC.
I have many hundreds of WLCs and need a spreadsheet that will tell me how many licenses each individual WLC has and what percentage each WLC is using of their total.

Similar Messages

NCS Prime 1.0 Eval License

I'm trying to get/install the 10 device eval license on a new NCS Prime 1.0 virtual appliance. I downloaded what I thought was the the right eval license but get this error when installing.
udi of file does not match the system
All I can find in the licensing guide is is this:
Cisco Prime NCS Evaluation Licenses
Cisco Prime NCS can be used in a lab or in an evaluation setting with the following license: NCS-10-DEMO. This provides an evaluation license for 10 devices, for a duration of 30 days. If you need a custom device count or duration, please contact your Cisco representative.
Can someone point me in the right direction?
--Patrick

I got it up and running this way :
1. Downloaded the NCS-VA-1.0.1.4-small.ova from cisco.com
2. Got it up and running on VmWare, run the guided setup..
3. Logged into the Gui
4. In the "License Center" you can see "product id" and "serial number" of the virtual appliance.
5. Used the "product id" and "serial number" to request a demo license on : cisco.com/go/license - "Demo and Evaluation Licenses" - NCS Demo 1.0 -
6. Download it and add it in license center
Now you have a 100 device license for 30 days
Carsten

Recomended report to identify inactive Netuser accounts on NCS prime 1.3

hi
i have two 5508 running 7.4 being monitored by NCS prime 1.3
Using local net users created origionally on the wlc but now from prime.
we are looking for a report that will show inactive users to assist with housekeeping.
rgds
Graham

Hi,
You can get the pur grp description by the table T024.
In SAP the release will be effected by relese code, which will not be assigned to the user.But however you can find who released from the table CDHDR by providing the transaction code in the field ME52N.
Regards,

NCS Prime prompting for login and password after re-imaging from dvd

Dear All,
I did a re-imaging on NCS prime after which I'm getting the below error
Please help me as to what could be the reason for this error...
Please type 'setup' to configure the appliance
localhost.localdomain login: Setup
Password:
Regards,
Waseq Mohammed

Re-imaging was not successful try this process:
Restoring the NCS Database
If you are restoring the NCS database in a high availability environment, see the "Restoring the NCS Database in a High Availability Environment" section. To restore the NCS database from a backup file. follow these steps:
Step 1 To view all local repository backups, use the below command:
show repository backup_repo
Note If possible, stop all NCS user interfaces to stabilize the database.
Step 2 Manually shutdown the platform as root.
Step 3 Using the CLI, perform one of the following:
•Restore the appliance and application backup by entering the following command:
restore testbackup-yymmdd-xxxx.tar.gpg repository backup_repo
•Restore only the application backup by entering the following command:
restore testbackup-yymmdd-xxxx.tar.gpg repository backup_repo application NCS
Step 4 Click Yes if a message appears indicating that NCS is running and needs to be shut down.
Note If the restore process shuts down NCS, a restart is attempted after a successful restore. The appliance will then restart and you will have to again login and restart the dbserver, and the platform manually as root (make sure you do not start with dbclean, else you will loose your recently restored data).
The CLI displays messages indicating that the NCS database is being restored.

How can we generate our FTP license using TrueLicense software ?

Hi friends,
I am Jaymin Shah from India.
Currently I am developing an J2EE application for office use. Now I want to commercialize that application.
So, I look around the web and found TrueLicense as a good Licensing software available for Java.. It is in Java so its a free source.
I am OK with generating regular license using privateKeyStore and publicKeyStore. and can validate my application using that.
But, when I try to built a FTP(Free Trial Period) license with it, it is not helping me. I want to give 15 days free trial to customers when delivered CD to them. And after that I want to deliver regular license to them for use the application.
Can anybody help me in setting the FTP in license in my application ?
Thanks in advance.

Jaymin wrote:
Thanks JoachimSauer for ur reply.You're welcome, but please avoid this kind of SMS-appreviations ("ur" instead of "your"), they make you look as if you don't care and therefore result in less useful replies.
First thing is - I am new to this forum (infact for any forum.) so by mistake i post it in this section. But i cant find any section for that. Thats why i put it in a simple New to java section.I didn't mean to post it to another section of this forum, but to another forum and/or mailing list altogether. This forum is not for support on third-party libraries, but for core Java questions.
Second. - team is working on that TrueLicense project. But there is less help available on web for that TrueLicense.The [TrueLicense homepage|https://truelicense.dev.java.net/] has a link to some [mailing lists|https://truelicense.dev.java.net/servlets/ProjectMailingListList]. That's probably the correct place to ask your questions.
Third - TrueLicense Library Collection (TLC) is totally free source.It is open source and free software ("free source" is not a commonly used term). But the fact has nothing to do with it being written in Java. I just told you that Java software doesn't necessarily need to be free software.
So, please read about FTP in that and give me reply regarding that.No way! You want us to learn about TrueLicense just to help you? That's unlikely. Go somewhere where people already know that software and ask your questions there!

Download Adobe License Server Tools? I want to manage the licenses using the in-house server

From this ticket https://forums.adobe.com/message/1329254#1329254, Am I able to download Adobe License Server Tools? I want to manage the licenses using the in-house server
Thanks.

Hi Carol,
Please check the given guide for in-house licensing tool;
http://www.adobe.com/uk/elicensing/licensemanagement/alm/pdfs/server_tools_user_guide.pdf
Let us know in case you require more detail regarding your query.
Regards,
Sarika Behal

Cisco NCS Prime - Possible Database Issue?!

Hello;
I appear to have problems with our NCS Prime database, I am running NCS in HA environment and over the last few months been running on the secondary server and collecting reports fine.
After failing back I have noticed that no data appears when I run reports on have a "flat-line" on all reports which gather data such as Client Traffic, once I failed back again to run on the secondary server in an attempt to gather some data the same problem occurs. I do however seem to have a small peak in data last night for 4 hours but this then dropped off.
Is there any way to see if I have lost the historical data?
Thanks
John

Issues I have seen is from upgrading. Have you upgraded to PI 1.3 or was PI 1.3 a greasy install? Also they might have some commands that they will have you issue or they will issue, but it's better for them to give you those than telling you what to issue because you don't want to loose everything.
Sent from Cisco Technical Support iPhone App

How to Re-Install Cisco NCS Prime in vmware appliance?

I'm attempting to do an Eval on NCS to see if it's worth pursuing this year or wait until next budget year and I'm having quite a bit of trouble, which is pushing me towards the "this sucks" category. My initial setup of NCS Prime went by with out a hitch until the NCS service tried to start and threw what looked like and Oracle DB error. Not being able to figure out how to re-install from the vmware appliance it's self, I had to kill the appliance and redo. This time, after asking me the typical and simple question of ip address and etc, it hung on trying to complete the setup of the app and ate up 16gig on my vmware box. Now, I realize that there is a maintenance release available as of last Friday, but my question is, instead of having to redo the enter appliance, how can I force the appliance to attempt a re-installation of NCS so that hopefully I can get to the point where I just do the maintenance upgrade? I would figure there would have be some way to re-install NCS in the vmware appliance with out re-installing the entire appliance in a support scenerio correct?
-Raun

If you mount the DVD image for the Vmware appliance so that it boots "on the dvd", you would have the option to reimage. No need to "recreate" the whole setup then.
Normally once it's installed, the upgrades don't require to re-image but you seem to be having troubles. The problem with Vmware installation is that it's hard to evaluate if the problem comes from the NCS or from the vm setup itself.

Plz help me about my Iphone 5s battary life is so bad without using in the night keep on after 6 hours morning when i open battary % lose 60 percentage with out using

Plz help me about my Iphone 5s battary life is so bad without using in the night keep on after 6 hours morning when i open battary % lose 60 percentage with out using plz help me..

Maximize iPhone Battery (iOS7):
1) Turn off Airdrop: Control Center >AirDrop > Off
2) Limit background app refresh. Turn it off for applications such as Google/Facebook.Settings > General > Background App Refresh
3) Turn off automatic updates: Settings > iTunes & App Store > Updates and Apps (off)
4) Unneccessary Location Services: Settings > Privacy > Location Services > System Services > Off (uncheck as needed)
5) Turn off Paralax: Settings > General > Accessibility > Reduce Motion
6) Siri, and her 'raise to speak.' Turn it off: Settings > General > Siri > Raise to Speak
7) Exclude items from Spotlight search as needed: Settings > General > Spotlight Search
8) Remove unneccessary notifications: Settings > Notification Center > None (per app basis)
9) Make sure auto-brightness is on, or reduce the brightness to 25% or less if desired.Settings > Wallpapers & Brightness
10) Use Still backgrounds only: Settings > Wallpapers & Brightness> Choose Wallpaper
11) Fetch email instead of "Push": Settings > Mail, Contacts, Calendar > Fetch New Data >Push(off) & Fetch every 15 minutes
12) Disable LTE if needed: Settings > Cellular > Enable 4G/LTE (OFF)
13) Reduce Autolock: Settings > General > Auto-Lock > 1 Minute
14) Disable Vibrations with Ring: Settings > Sounds > Vibrate on Ring (off)
15) Close Applications regularly: Double Tap Home Button > Swipe up on App to close

NCS Prime Wireless Management

Hello,
We have recently purchased Cisco NCS Prime for our Cisco Wireless project. Before installation we need to confirm that NCS
prime will be compatible with ESXi v5.0, as the release notes refer to
ESXi v4.0 and v4.1 only.
http://www.cisco.com/en/US/customer/docs/wireless/ncs/1.0/release/notes/
NCS_RN1.0.1.html
Many thanks
Jonathan.

Hi Chris,
1. No.
2. There is a symptom of the following bug:
CSCtw52442 NCS: Lobby Ambassador user can access the home page.
Installing Chrome frame plugin for IE browser in NCS is a requirement as documented in the release notes. This caveat is to address the issue where lobby ambassador users are getting access to the NCS home page to which they have no privileges for. For your IE users, install chrome frame plugin which should take care of it.
Ram.

Can InDesign tell me the percentage of color used on a document?

I have a client on a fixed budget who wants a booklet with some pages in color. I use a printer who charges fluctuate based on the amount of color coverage. Can Adobe InDesign tell me the percentage of color used on a document?

I'm used to seeing digital printers charge based on color vs. black per page, but never by coverage, but then you used to be able to buy software instead of renting it, so times change.
It's pretty common for files with Black ink only to really have some color on them -- printers marks, for example, or they go through a profile conversion and print as rich black.

NCS Prime 1.3 Controller Audit Status Mismatch

When performing an audit from NCS Prime 1.3 on our 5508 controllers (500 lic) we are getting mismatch messages from many of our 3602i AP's that say the following...
(Type)Configuration Name Audit Status Attribute Prime Infrastructure Value Controller Value
(AP APname, Interface) 802.11a/n Mismatch Spectrum Intelligence true false
These AP's are not configured as Spectrum Intelligence on the controllers, rather as local. It seems that NCS believes that they are supposed to be SI. We have refreshed the config from controller many times but this does not change.
The 5508's run v.7.2.111.3
Is there a change I can make on NCS or otherwise to make this mismatch go away? Is this a bug? It is not causing any problems (that we can see) but as most would rather not have these mismatches.
Much Thanks!

Well when you do an audit, you specify what templates you want to audit the WLC's against. So take a look at when you perform an audit as to what tempted you have chosen. This could of been an old template and needs to be removed.
Sent from Cisco Technical Support iPhone App

How to tell whether a license used to install SQL Server is MSDN license or Volume license?

I want to check license used to install SQL Server is MSDN license or Volume license for SQL Servers which are at least SQL Server 2008 on Windows 2008 R2. Is there any script/command/tool that I can run on Windows or SQL Server to find such
information?

Hello,
This is a community forum for technical questions & issues.
For question regarding pricing / licensing please contact a Microsoft sales partner or licensing expert.
Call (1-800-426-9400), Monday through Friday, 6:00 AM to 6:00 PM PST to speak directly to Microsoft licensing specialist.
http://www.microsoft.com/en-us/server-cloud/products/sql-server/buy.aspx
T-SQL Articles
T-SQL e-book by TechNet Wiki Community
T-SQL blog

NCS Prime Wireless

Hi
I am running a NCS Prime Wireless 1.1.24 ... and i have the following questions/problems..
1. Can we change the Font Size on the printout of the guest data generatet via NCS??
2. If i login simultan with two same usernames (lobby ambassador) i see a different Homepage ..
With firefox it works as designed, if i login via IE9 with the same username simultan i get the starthomepage of the NCS without the config buttons...
Anybody the same problems ??
Thanks Chris

Hi Chris,
1. No.
2. There is a symptom of the following bug:
CSCtw52442 NCS: Lobby Ambassador user can access the home page.
Installing Chrome frame plugin for IE browser in NCS is a requirement as documented in the release notes. This caveat is to address the issue where lobby ambassador users are getting access to the NCS home page to which they have no privileges for. For your IE users, install chrome frame plugin which should take care of it.
Ram.

Unable to Push the Config Frm NCS prime to CIsco WIreless Lan Controller

Hi Guys,
We have an issue with NCS prime, in our Network.
We run NCS prime 1.3 and Around 10 Wireless Lan Controllers (5508 & 4404) Models.
We are trying to Push a ACL Config Template from NCS to Wireless lan Controllers.
This ACL is already created before in WLCs, now we created the templates in NCS with few rules added and planning to push Configs from NCS template.
We are receiving errors SNMP operation to device failed. I am pretty sure it is not an SNMP issue.
Any inputs on this is much appreciated

Hi Scott.
I
I tried deleting the ACL from Controller totally and tried pushing it. it was not working neither
Raised a case with Cisco. They asked for few trace logs from NCS , told will check and get back to me.
IS there any more inputs, you can provide, which i can try to test it?
Regards
Safwan

NCS Prime 2.1 Percentage of Licenses used on WLC2504

Similar Messages

Maybe you are looking for