NCSM and Kiosk mode for DTU's

I downloaded and installed the Sunray 4u2 server software and it indicates that it can set DTU's in Kiosk mode now, not just per smartcard. This would be a good feature in our environment, since we use NSCM. However, I can't find a way to set a single DTU in to a Kiosk mode this without putting all of them in it. I would like one to display the window login via the connector all of the time. Any ideas or can someone point me to some good directions? Thanks!

I have figured out our problem. After we loaded the patches and rebooted the utpolicy changed to disable NSCM. We noticed then when we hit shift-pause and instead of disconnecting it just cut over to the screensaver. When I re-enabled non-smart card mobility with the ./utpolicy -M the DTU's that we had set to go into Kiosk mode (full screen windows) no longer worked, they had the gnome login. When I reran the ./utpolicy without the -M to disable NSCM the Kiosk mode for specific DTU's starting working again.
My conclusion is that NSCM and Kiosk mode by specific DTU's is incompatible.
Can someone at Sun confirm this?

Similar Messages

My iMac suddenly no longer connects to wifi network when in KIOSK (username) mode, and only connects when as ADMINISTRATOR mode. Its strange because the iMac has been working fine in KIOSK mode for over a year until 2 days ago.

My iMac suddenly no longer connects to wifi network when in KIOSK (username) mode, and only connects when as ADMINISTRATOR mode. Its strange because the iMac has been working fine in KIOSK mode for over a year until 2 days ago.

One of the memory cards was indeed faulty, and the other completely fine
Thanks very much for all your help!
Although there is one little thing that I've noticed. The iMac works properly, but I tried to software update to see if that may help my Minecraft sound issue (as I still don't think only having 2GB instead of 4GB would cause such a problem) but the software update application won't work. Running the "Software Update" from the apple menu on the toolbar gains no response, nothing happens. If I run the software update from system preferences, the application icon appears for a second, then disappears (as in the blank app. icon, the blank canvas with the pencil, pen and ruler in the bottom right corner). It does this every time I try to run it. It did work when the computer was crashing, but this started when on one of the occasions I ran the app. while it was crashing. Since this occured during the crashes, and still occurs now, I'm wondering did something simlar happen minecraft, as it's sound disappeared during the crashes and is still gone now.
However, the computer is now working again without crashes, which is the main thing, thanks for helping me fix the issue
Edit: I would mark the topic as solved, but I'm unsure if this would lock the topic or something simlar, so I'd rather leave it open for any ideas regarding the software update and Minecraft issues I'm having

Kiosk Mode for a few of WinRT App

Hi,
Please move this thread to appropriate section if required as I don't know which section to place.
Current Kiosk Mode for Win8.1 Tablet run only one WinRT App. My client wants to put a few WinRT app into Kiosk Mode. Please kindly extend your help on this matter.
Thanks

Hi,
First, I have to say that So far your only option to create a Windows Kiosk where your users and customers could interact with a
single application without the risk of compromising the system was to use Windows Embedded.
If you want to control usage of several apps for an account, I recommend you try the Family safety feature.
Family Safety helps you set limits on your child's PC time, as well as the websites, apps, and games they can use (and when).
Set up Family Safety
http://windows.microsoft.com/en-us/windows/set-up-family-safety#set-up-family-safety=windows-8
Thanks for your understanding.
Kate Li
TechNet Community Support

In preview all is good...burning dvd the music cuts out 2 times in 4 songs...i have turned off all other programs, sleep and energy mode for battery...multiple tries... same result ...help

IDVD - in preview all is good...burning dvd the music cuts out 2 times in 4 songs...i have turned off all other programs, sleep and energy mode for battery...multiple tries... same result ...help

Hi
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an audio-CD .aiff
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provocing it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
176x144
480x360
640x480
720x540 960x540
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies—except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format—that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

Parallel and multiplexed modes for SCXI...

I am having difficulty understanding how the Parallel and Multiplexed modes for SCXI modules work. I've been trying to find one comprehensive document but have been unsuccessful. Can you please help considering the following configurations:
Single chassis, single module
Single chassis, multiple modules
Multi-chassis, single module on each (I don't know when that would ever be used, but nevertheless...)
Multi-chassis, multiple modules
Also I would appreciate it if you could mention when the DAQ device's onboard multiplexer is used, when the SCXI chassis/module/bus' multiplexer (I don't know where exactly the SCXI-based multiplexing occurs) is used, and when both are used.
Thank you.

These links should help you
http://digital.ni.com/public.nsf/websearch/cc4aa48bbff92ba586256522004eb7e3?OpenDocument
http://digital.ni.com/public.nsf/allkb/E3D3723E9D05AB4986256AA9005B5572
http://digital.ni.com/public.nsf/allkb/86C493E0768EBCFE86256FD4006BCD52
http://digital.ni.com/manuals.nsf/websearch/c195895e8c9cae3d8625691f004db285
Regards,
Dev

Kiosk Mode for a Museum Exhibit

I am helping to put together a museum exhibit and need some help with getting my Surface Pro 2 into Kiosk mode. The hope is that I will be able to have a flocking tutorial on the surface pro 2 and have visitors be able to manipulate the tutorial and view
it on the tablet. However, I need to make sure that the visitor cannot navigate away from the screen. Currently, the tutorial is on an 'executable JAR file" and it's working great. My question is, how can I prevent the visitor from using the tablet for
any other reason other than the flocking tutorial on the file? It's not a matter of just restricting access but entirely blocking access to the desktop, app, internet, everything. The museum doesn't have the staff to make sure that the tablet is always
opened to the file. I need to make sure that the screen never leaves the file. When I use the family settings and restricting access, it will prevent the user from being able to use an app, or search the internet, but it will have a screen that says access
is blocked. I need to make sure that the security screen that states that the access is blocked doesn't even come up. In other words,
I need to make sure that the only thing the tablet can be used for is this tutorial. I would like to be able to use the tablet normally after the exhibit is taken down.
I don't know much about programming. I have been trying to work with the tech reps at Microsoft but no one has been able to help me and they suggested that I try this forum.
Please help! I need to get this figured out this week because we are installing the exhibit next week.
Thanks!

Hi Daniela,
Have you tried the following;
http://blogs.msdn.com/b/hyperyash/archive/2013/10/25/enable-kiosk-mode-in-windows-8-1.aspx
Try this and give me a heads up if you need any further assistance
With compliments Alexander Solaat Rødland SURFACE 2 Pro 256gb

How to print Individual mode and Collective Mode for Goods Receipt

Hi Friends,
Right now I am working on Smartforms on MIGO transaction.
My Client requirement is that all items that have been received should be printed on one form in
Collective mode.More specifically in the transaction MIGO only the items checked OK should print on
the form. It Should also allow the user to print Items in Individul mode.
Could anybody please specify on what basis( fileds ), I will be able to segregate the items.
how can I write the select stament so that when the user selects collective mode and accordingly
should print. same for individual mode.
Kindly help me.
Regards,
Xavier.P

In MIGO tcode you strcture like GOHEAD-XNAPR and GOHEAD-WEVER
if you check GOHEAD-XNAPR = X and select GOHEAD-WEVER Individual mode and Collective mode.....

IE and "kiosk mode"

I'm trying to deploy my Forms60 application on the Web using Netscape in "kiosk mode" (i.e. disabling the toolbar, address and links).
I need to do same with IE: particularly I need to prevent the user from re-enabling the toolbar und using the "bak" button.
Any help would be greatly appreciate.
Thanks in advence.

Hi,
Based on my research,it seems that we cannot display two different pages using IE on two screens at a time.
Maybe we can try to use 3rd party applications.
Regards,
Kelvin hsu
TechNet Community Support

WEC7 and Kiosk Mode - performance

Hi everyone
Does anyone know the benefits regarding memory and performance from running in Kiosk Mode compared to Windows Shell on WEC7?
Is there much to be gained?
Regards
Terry

Performance is not the reason to run Kiosk mode. Not running the shell will free up a little RAM and burn a few less CPU cycles, but that is minor.
Run in Kiosk mode because:
You don't want the desktop to show, ever
You don't want users to accidentally get to the desktop
You don't want users to maliciously get to the desktop
You want to be fully in control of the user experience
Bruce Eitman (eMVP) Senior Engineer Bruce.Eitman AT Eurotech DOT com My BLOG http://geekswithblogs.net/bruceeitman Eurotech Inc. www.Eurotech.com

Kiosk mode for Flash movies?

I know Flash usually optimizes projects to be as compact and
web-friendly as possible. But I only deal with kiosk type projects
that play from a local hard drive with a really beefy host systems
(quad core, 4GB RAM, 500GB HD, Nvidia 8800). Is there a setting
where I can tell my SWFs to eat up gobs of memory and CPU cycles to
ensure the smoothest playback and performance?

It is also advisable to turn off, somehow, using ActionScript
the "video smoothing" feature of the Flash Plugin, since it may
result in huge frame-dropping of the movie, during full-screen
playback.
The need to remove this feature is raised, if you use
"hardware scaling". "Hardware scaling" works fast with "video
smoothing" enabled and plays-back the video without frame-dropping.
"Video smoothing" is the main reason why most of the Flash
Video players cannot play-back smoothly HD content.
Also make sure that the video plays-back in the original
dimensions of the video and not scaled to any other dimensions (eg,
don't scale a 4:3 video to 16:9 or to "fit to screen").
Also, the resize factor of the video in full-screen mode
should be an integer, absolutely dividable by 4:3 or 16:9 or
whatever the original scale of the video is, so the video in
full-screen is not stretched to a different scale factor (eg scaled
to 4.1 : 3), even by 1-2 pixels. This will be like doing real-tme
video editing and it also results in frame-dropping.
I know this info from our company's Flash Developer, so this
is as far as my knowledge goes; I am unable to provide any other
accurate technical information or code you may use. I am also
making it clear that this info may or may not be 100% accurate, as
I am not proficient in Flash and I may have not understood right
some info passed to me by our Developer. You may use this info to
make your own research on the matter.

Bridge and Client Mode for dual radio 3502

I want to use my dual radio 3502e AP to service clients on the 2.4 MHz and do a point to point bridge on the 5 GHz. Is that possible?

Hi,
3500 series AP's are technically only supported in lightweight (controller based) mode.
7.0.116.0 allows 3500's (as well as most other models) to operate in mesh mode. This would be a better alternative.
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_0_116_0.html#wp673954
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080b1c101.shtml

Color space and preview mode for mobile devices?

I want to create artwork that will be exported directly for mobile devices such as Androids and also that will be imported into Flash to create interactive content.
1. Is sRGB the best workspace for mobile devices?
2. I can use view > pixel preview to see what artwork will look like in a browser, though what about for a mobile device such as an Android?
Thanks.

anyone on this one?
Thanks.

Creating autostart DVD in kiosk mode?

I need to create a DVD or video file that will run in kiosk mode for an exhibit we have up. Since I've never done this before I have a few questions.
1. The video has already been created by our local cable TV folks and they said they can save it in any format we need. My first question is: what formats will work best?
2. It looks like just using the autostart feature in iDVD will allow me to create the DVD that will run automatically. Do I need to do anything to make it loop continuously?
3. One last question that might be beyond this forum: Is there a way (script, etc.) that we can start up the computer daily and have it shut down automatically, and begin running the DVD automatically? We'll be disconnecting the keyboard and mouse so that folks can't mess with the computer.
Thanks in advance for your advice/ideas.
Patrick

Hi
1. StreamingDV .DV or QuickTime full quality and as .mov
2. Don't know if this can be done.
I would in iDVD import movie into Autostart box (in box view - upper left most box)
then Select Looping.
I guess that a normal TV & DVD set-top player might autostart when mains returns.
But You have to try out first to be sure.
Yours Bengt W

Display window task bar on web page opened in kiosk mode.

I am using IE8 in Window 7.
I open a certain web page in kiosk mode (call IE browser with -k option, a full screen without window frame). How can the window task bar be displayed at the bottom of the web page while the web page is in kiosk mode?
Thank you for advice.

Hi,
If you are using kiosk mode for a public access terminal, then you use the default Guest user account and use GPO to limit their access to other applications that are installed at the machine level.
How the web browser opens links from other programs is set in Internet Options.
I don't think your EULA's cover Word or Outlook on public access computers.
Allowing the public to access the windows shell is asking for trouble.... putty and your networks mud.
Firstly you should update the machine with the latest Windows updates and IE11. And download the admx files and use GPEdit applied to the Guest account to lock down the machine for that user account.(including the shell)
Websearch: creating kiosk applications for IE Group Policy
Questions regarding Internet Explorer 8, 9 and 10 and Internet Explorer 11 for the IT Pro Audience. Topics covered are: Installation, Deployment, Configuration, Security, Group Policy, Management questions. If you are a consumer looking for answers or to
raise a question, it's highly recommended you head on over to http://answers.microsoft.com/en-us
Rob^_^

Sun Ray Kiosk Mode Timeout Settings

For the Kiosk mode I see two different places for timeout settings. I have copied them in below. My issue is that I am seeing a lot of Login Greeter/Idle Sessions and I think the first "Timeout" setting should be set lower, but I don't want to disconnect good sessions.
One here in the admin gui under "Advanced" and "kiosk mode"
Session:
Sun Ray Connector for Windows OS
Timeout:
24000 seconds
Under that is a place for "Arguments"
where I see:
-t 3600

I recreated the kiosk user accounts (utconfig -k) and the problem has been resolved. Thanks to those who sent comments.

NCSM and Kiosk mode for DTU's

Similar Messages

Maybe you are looking for