Ncum InfoCub compression very slow
subj
2lis_03_bx has loaded and compressed (30000 rows, with marker update) without any problems
2lis_03_bf/um has loaded, but compression (11 mln rows, without marker update) not ended (take very long time)
But some time, compression (bf/bx), is processed ok (after delete all data from infocube, and loading again (bx/bf/um)) (but not always)
ver. BW - 3.5 17 patchlevel
please help mi!
Hi,
Are you having large amount of records for compression ie data volume is huge in your cube.
Try to delete index,load data, compress infoocube and generate index for them.
Try to refresh stsatistics of cube once a week atleast.
Follow compression of data at regular intervals like weekly or daily.
If you go for a month large amount of data combined during which you can try compression of 5 to 10 . Sometimes comprressing larger number of request may result in dump due to temporary space unavailable
Hope this helps for you.
Thanks,
Arun
Edited by: Arunkumar Ramasamy on Oct 27, 2009 12:50 AM
Similar Messages
-
After index creation infocube is very slow! (don't produce result)
Hello all,
I have the following problem, on a single cube ZWLPIANIF, after the index creation from manage of cube, the query on this cube is totally unusable because during a lot of time (it's necessary stop the execution) I whait over 30 minutes. When I delete the index the query work fine a little bit slow compared to another cube that have index.
ZWLPIANIF have 1,200,000 record loaded in FULL
from RSPC we made the following step:
deletion index
loading
creation index, the job of creation is completed successfully (in SM21 no log, in ST22 no dump, in SM37 is ok).
This is the details of our system SAP NetWeaver 2004s:
SAP_ABA 700 0016 SAPKA70016
SAP_BASIS 700 0016 SAPKB70016
ST-PI 2008_1_700 0000 -
PI_BASIS 2006_1_700 0006 SAPKIPYM06
SAP_BW 700 0018 SAPKW70018
FINBASIS 600 0013 SAPK-60013INFINBASIS
SEM-BW 600 0013 SAPKGS6013
BI_CONT 703 0011 SAPKIBIIQ1
ST-A/PI 01L_BCO700 0000 -
everyone have some ideas?
REGARDS
GianvitoHi,
You can analyse/debug the query through RSRT in execute+debug mode and please check wether the database optimiser chooses the right index that means wether statistics are updated or not.
You can do a reorganise of indexes as well.
Thank you,
Tilak -
MacBook Pro very slow to bring up homepage, programs won't open; likely related to failure to upgrade Java on Parallels, told that C disc low capacity, disc compression recommended was unsuccesful/failed. Rebooting, battery removal hasn't helped. Can't open Systems Preferences. Suggestions?
Linc, the resident dump guru, will probably be along in awhile and provide deeper insights, but here goes for now. I'm seeing an awful lot of warnings and messages from Chrome. Any chance you could lay off that browser for awhile and use Safari in the meanwhile? No red messages anywhere in the listing. Have you tried rebooting into Mountain Lion Recovery Mode to do a Repair Disk and Repair Disk Permissions? (Cause in spite of what your config tag says, the dump indicates you are running a ML kernel)
-
Peformance its very slow Report BI 7
Hi All,
Very Good Morning.........
Peformance it's very slow in Bex Report..... how to reactify the problem, please provide solutions ...
Please provide step-by-step.
If any possibel Enchancement of the report.
Advance thanks........
Bye,
Vijaay.Hi Vijay,
There is very much you can do about performance in the background (infocube level)
But, very littile you can do in the front end (query level)
to increase performance,
1) create indexes on the cube - creating indexes increase the readspeed of data.
Infocube manage -> performance tab -> create DB indexes*
2)Roll up of data to aggregates - If aggregates are build already, you can roll up the data else you can check the option to create aggregates
Infocube manage -> Rollup tab -> Execute.*
3)Compression - compression is a technique where you compress all the data in to a single request hence the over head of maintaining mulotiple requests get reduced subsequently increasing the query performance.
Infocube Manage -> collapse -> execute.
apart from the above, you also have the option to partition the cube. a little search on cube partition in SDN can give you the details.
Hope this helps,
Sri... -
Conversion of Characteristic Values to SIDs. Load Very slow
Hi Experts,
We have a slow load issue when loading from a Write-Optimized DSO into an InfoCube. 8 millon recs in 10 hours.
We check the start, end, and rules routines and every is ok but for all the package the load was very slow in the Conversion of Characteristic Values to SIDs.
Can any help me with this?
Thanks a lot,
AlejandroHi,
It is because the SIDs Generation upon Activation flag is unchecked at DSO level .
One recommendation will be to switch on the property of the DSO SIDs Generation upon Activation flag .
Are there any secondary indexes also in DSO ?
You can try deleting them also during loading the data from DSO to cube .
Also load your master data first and activate it before loading it to cube.
Thanks, -
Save Open dialog box opening very slow
I have windows 7 professional 64bit OS. whenever i try to open/save as dialog box it appears very slow, then it will say it is not responding then after 10-15sec it will come alive.
Need help!!!!!!Blair,
I followed your suggestions above....reset IE ...clean boot. Didn't solve the problem. (had trouble making that MSCONFIG window bigger !? <wink>)
Problem still exists. And to be clear, here is the problem(s) ...I believe they are all interrelated.
#1. I end the explorer.exe process and restart it. Run Explorer and start clicking folders in my FAVORITES. System hangs for about 10 seconds before it catches up.
Alternatly, after a explorer.exe restart, if I run explorer and start clicking down through folders from the C: drive, there is no hang. SUSPECT - some sort of file for favorites needs to be rebuilt?!
#2. Open MS Word. Type a few letters. Select File/Save. Most icons under Favorites are white. Trying clicking more than one, but system hangs for ten seconds until icons fill in.
#3. WINDOWS button, start typing in the search INTERNET....5-10 seconds before Internet Explorer (and other INT* things show up.! Usually this is instantaneous.
System Info:
Great machine and fast for over a year, and now this started FYI.
OS Name Microsoft Windows 7 Home Premium
Version 6.1.7601 Service Pack 1 Build 7601
Dell System XPS L321X
x64-based PC
Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz, 1601 Mhz, 2 Core(s), 4 Logical Processor(s)
4 gb Ram
256 SSD
ACTIONS TAKEN: (estimated 30 reboots today)
- Ensure all folders are GENERAL under properties
- Advanced Attributes - turned off "allow files on this drive to have contents indexed in addition to file properties"
- Checked Indexed location is C: drive/ User/ just my data areas....reindexed
- Tried reboot with Windows Search service disabled....no help. Turned back on.
- Tried MS Essentials off. Tried Firewall off
- Rebuilt ICONCACHE - was 8mb, now less 450kb
- Archived OUTLOOK down to a reasonable size (and had to do the manual compress to reduce the file size after)
- turned off some Windows visual effects.
- Turned off Dropbox from autostarting....this was before I tried the Clean Boot
- turned by ON (default) in Startup - though it has Unknown MFG and no details :~( , i found that it likely is needed for my 64 bit machine.
Any help would be appreciated.
Steve -
My macbook pro is running very slow and very very hot
hi everyone I have a 13 inch mid 2012 MacBook pro,
it is running very very slow and extremely hot, I downloaded a program called smc fan control and it is reading the internal temperature of my computer as 80 degrees Celsius. I was looking on the forums and saw that I should run an apple hardware test. which I have done and it is coming up with Error 4/MOT/4/40000002: EXHAUST-2003
what does this mean? is it something to do with my fan?
also there is a very strange clicking noise when I lift the mac up or if its on its side and sometimes it just randomly freezes, the computer does not respond and then it restarts.
what do I do?
please help!" the fan didn't seem congested with dust, at least not enough to cause any malfunction."
The lint and crap builds up in the heat exchanger radiator. It's the grilled thing at the output of the fan.
https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Unibody+Mid+2012+Fan+Replacemen t/10367
Look at step 6. It's that grilled thing at the top of the fan. If you remove the fan that radiator is probably clogged with lint. Brush it all away and if possible blow out the fan with compressed air. Make sure the fan turns freely and doesn't feel stiff.
http://s291.photobucket.com/user/spudnuty/media/13%20inch%20MacBook%20Core%202%2 05-2007%20dirty%20rainstrm/MacBookHeatsinkinlet.jpg.html?filters[user]=68196367& filters[recent]=1&sort=1&o=21
This isn't a MBP radiator but the problem will look like this. -
When i start my hot backup my database getting very slow
Hi,
I am using following commands for enabling hot backup
SQL>ALTER SYSTEM ARCHIVE LOG CURRENT;
SQL>ARCHIVE LOG LIST;
SQL >ALTER DABATBASE BEGIN BACKUP;
Database altered.
SQL>SELECT FILE#,STATUS FROM V$BACKUP;
FILE# STATUS
1 ACTIVE
2 ACTIVE
3 ACTIVE
4 ACTIVE
and using cp -rp command to copy the file (backup copying speed good) but database performance very slow
How to improve performance ...
Regards
Vignesh CUwe Hesse wrote:
It is very likely that you experience slow performance with ALTER DATABASE BEGIN BACKUP , because until you do ALTER DATABASE END BACKUP , every modified block is additionally written into the online logfiles . Doesn't that happen only the first time the block is modified?
>
The command was introduced for split mirror backups, when this period is very short. Else ALTER TABLESPACE ... BEGIN/END BACKUP for every tablespace one at a time reduces the amount of additional redo during non-RMAN Hot Backup. There appear to be only 4 files. We don't know how big or sparse they are.
>
RMAN doesn't need that at all - much less redo - and also archive - generation then.
Furthermore, you can use BACKUP AS COMPRESSED BACKUPSET DATABASE to decrease the size of the backup even more - if space is an issue.
In short: Use RMAN :-)
Agree with that! Unless the copy is actually going to an NFS mount or something, where I would be concerned whether it is the type of NFS that Oracle likes. I'd also advise a current patch set, as the OP didn't tell us the exact version, and I have this nagging unfocused memory of some compression problems of the "oh, I can't recover" variety.
I'd like to see some evidence on I/O and cpu usage before giving advice. When I used to copy files like this, it would choke out everyone else. RMAN was a savior, but had to wait for local SAN upgrade. -
I have one SUN Server as oracle 9i server.
Server Model: T5220, 32 Virtual CPUs and 16G memory. I am very disappointe for its IO speed using internal disk. When I import data into DB server , it spend 16Hours. but it only spend 8 hours in SUN V480.
And then, I use command "gzip" to compress one file. I found it's also very slow. It spend 1 hours to gzip 10G size file. When it gzip, I check using iostat. The IO speed is only 3M/s.
What's wrong is it? How can I improve the IO speed?shula4 wrote:
I have one SUN Server as oracle 9i server.
Server Model: T5220, 32 Virtual CPUs and 16G memory. I am very disappointe for its IO speed using internal disk. When I import data into DB server , it spend 16Hours. but it only spend 8 hours in SUN V480.
And then, I use command "gzip" to compress one file. I found it's also very slow. It spend 1 hours to gzip 10G size file. When it gzip, I check using iostat. The IO speed is only 3M/s.
What's wrong is it? How can I improve the IO speed?Both commands (import into db server and gzip) are typical single-threaded tasks. CMT-based servers (e.g. T5220) doesn't perform very well in such
tasks. They were designed to perform very well with many, many tasks or jobs which can be parallelized. Use different tools in each case:
Import into DB
Try to paralleize it, e.g. since Oracle 10 you can use data pump (instead of import). Data pump is typical parallel processing.
gzip
Use pbzip2 which is parallel implementation of the bzip2. Example of its use:
[http://przemol.blogspot.com/2009/01/parallel-bzip-in-cmt-multicore.html|http://przemol.blogspot.com/2009/01/parallel-bzip-in-cmt-multicore.html] -
Application ADF load very slow
Dear all.
My team build a backup server for oracle portal and oracle center content version 11.1.1.6.
I restored UCM server normal, configuration and index.
But application load very slow, 2 minutes. In original server is 15 second.
I see log when i restore error in index. Indexing database too slow 4-5h.
I expdp normal with no error
Does anyone kind to help me to solve this? Thanks in advance for any help or suggestion.I use iSquint to compress the video. Have a look at this site to see my dv project that was 286mb original size, compressed down to 4.8mb. http://web.mac.com/lfairlie/iWeb/Site%204/Welcome.html
You can play with the size it compresses to quality wise as well.
Message was edited by: lynnie61 -
CS6 After Effects PNG export very slow - Not Multi-Threaded?
I am rendering an after effects project consisting of over 320,000 source frames of 4000x4000 resolution, outputting over 250,000 frames as PNG files.
Rendering is instant on our machines, all time is spent "compressing and writing" frames. It is taking forever.
We have several machines that are all windows 7, with 16 physical cores, 64GB ram, connected to a 4Gbit SAN.
I did some experimenting, tried using all 16 cores, or 8 cores, or disabled multi-frame rendering even. When this project is rendering my cpu usage is almost non existent,. maybe 1%-5% at times.
with 16 frames at a time being rendered it is averaging between 1 and 7 seconds per frame depending on the content of the frame.
Does Adobe have any plans to multi-thread the PNG exporter? or is there a faster 3rd party plugin out there i could use? It is very slow and doesn't tax the CPU's at all. Even on a single core it doesnt even use 100% cpu while its saving.
I even tried loading one of the frames into photoshop and simpy hit save as a PNG and it took almost 15 seconds to compress and save. I did it again without compression and it saved the 40MB raw file instantly.
That is terrible performance for machines like mine that are pretty much the fastest things out there.
Thanks!I appreciate your attempt for a workaround solution, however as you well know you can't render to a video file from multiple machines. we must output directly to individual frames, I setup 8 machines to work on this project, if we did not use compression then we would be writing over 300MB/sec of data which would not be good for our fibre network which unfortunatly is only 4Gbit. And it would be about 10TB of data total.
As for your workaround Im not sure we could gain speed with your method either way. spending the extra time to encode to a lossless format and then process again in AME sounds like it would take even more time, unless AME could create PNG files at some sort of ridiculous speed maxxing out every core at 100% or something to compress the PNG's. Out of curiosity I will throw some frames at AME and see how long it takes to compress and how much cpu it will use.
thanks -
Hi. Basically, my export has gone very slow. I will give what details I can, but the main thing here is that I am doing what I have always done, but suddenly it is going very slow. I export to MPEG2 DVD as that goes straight onto a DVD without further render in my Sony DVD maker program. Export in Premiere usually takes between 30 and 40 minutes. Latyest project is warning me of over 3 hours! I thought I would ask here before waiting and seeing if it still works okay in case there is an obvious answer. MPEG audio, multiplexer on, maximum mrender depth, CBR slider set to make a file that will be as large to preserve quality and still fit on a DVD (I go for around 4GB or just over) Stick to CBR as the estimated file size is more accurate than messing about with VBR sliders. Projects are standard definition, two video sources mixed (full DV) and separate sound source added and synchronised. I film stage plays with two cameras. Projects typically between one and a half and two and a half hours long. This project is actually at the lower end. No other obvious problems with the PC in general. Is it worth a system restore? It was fine for a project similar size rendered last week. I am asking befoire i try system restore as they are getting hard to do. They never seem to work unless I remove all my virus protection stuff! CAn I think of anything different about this project? Well, only that the venue I was filming in was not quite level, resulting in a bit of an angle that I corrected by tilting the film just a few degrees. (Only affecting the part of the picture that would be off the TV screen) just to make the stage look level. I often do this with a few shots from one of the cameras, but maybe not the whole film for both cameras like in this case. I even tried pressing enter and doing that render thingy before export. That did not help. Maybe that is just to get something better in the preview window. Normally it just takes around half an hour or just over. Media player can be a bit crackly and choppy playing the rendered movie, but then it is always fine on the DVD so I just put that down to windows media playing being a bit rubbish and not important in my case. Sorry if I have neglected to tell you anything important. I usually get told off for this on this forum, but I have tried to give you details about the settings I am using. The main thing is that I am only doing what I usually do. If I was exporting to a different format I might expect a different time. I can tell you that I got bored waiting and cancelled a few times before coming on here. A couple of times the screen went very white and said windows would close the problemn and notify me of any solution. Program closed but no useful information (I would not really have expected Windows to give me any!). Maybe someone here can? I suppose I had better wait for the three hours or more and at least see what comes out, but cant help being scared it will freeze at 37.34 percent and I will give up after waiting three weeks! But any suggestions would be helpful. Sorry not very tech-savvy so please keep it to plain English. Thanks in advance
Without knowing your computer specs, hard to comment on how long an export ought to take. However, you said yourself that you may have applied rotation to much of the video, and perhaps that is slowing things down from normal.
Please check that your hard drives are defragged and are not getting more than 70-80% full as performance can quickly degrade. I would turn OFF the "Max Bit Depth" and "Max Render Quality" if being used. Should not be needed for DV clips going to DVD. As for pre-rendering the timeline, not recommended. This just adds another layer of compression (quality loss) to the final render, IF you check "Use Previews" in the Export area. If not using Previews, then it is all getting re-rendered anyways, so just a waste of time and drive space really, unless playback is so terrible that you want to render a section to check the results before exporting.
I notice you have MultiPlexing ON for the export - is that how the Sony DVD software wants it? Most authoring programs (like Encore) perform better with separate elements of audio and video, meaning the .wav and .m2v files. Reason being that the DVD program will usually be creating Dolby (AC3) audio for the final DVD, so if you feed it the raw elements, it can convert the .wav to .ac3 quickly, and will NOT need to transcode the video. If you Mux (combine) the audio and video, the audio has then been compressed to lossy MPEG audio, then the DVD software needs to separate the audio and video and re-encode them again in most cases. Not the best workflow. Unless your final DVD uses MPEG audio, but I'm not sure that is a legal part of the spec worldwide, is normally PCM or AC3 for player compatibility.
Not a big fan of anti-virus programs, have found many of the popular ones to really take over and bog down the system. Personally, I use and recommend the free solution of Microsoft Security Essentials. My computer, and those of my kids, have been virus-free the last couple of years since going to that solution, and I see no decrrease in performance and it runs in the background totally transparent to me.
Regards,
Jeff Pulera
Safe Harbor Computers -
My MacBook Pro is very slow booting up (1 minute plus) since I installed Mavericks. What can I do to speed up?
Hi John,
I posted the question. Here is my system log result:
Mar 3 11:29:52 localhost bootlog[0]: BOOT_TIME 1393864192 0
Mar 3 11:30:05 localhost syslogd[18]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Mar 3 11:30:05 localhost syslogd[18]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
Mar 3 11:30:05 localhost syslogd[18]: Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Mar 3 11:30:05 localhost syslogd[18]: Configuration Notice:
ASL Module "com.apple.bookstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Mar 3 11:30:05 localhost syslogd[18]: Configuration Notice:
ASL Module "com.apple.eventmonitor" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Mar 3 11:30:05 localhost syslogd[18]: Configuration Notice:
ASL Module "com.apple.install" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Mar 3 11:30:05 localhost syslogd[18]: Configuration Notice:
ASL Module "com.apple.iokit.power" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Mar 3 11:30:05 localhost syslogd[18]: Configuration Notice:
ASL Module "com.apple.mail" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Mar 3 11:30:05 localhost syslogd[18]: Configuration Notice:
ASL Module "com.apple.MessageTracer" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Mar 3 11:30:05 localhost syslogd[18]: Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Mar 3 11:30:05 localhost syslogd[18]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
Mar 3 11:30:05 --- last message repeated 6 times ---
Mar 3 11:30:05 localhost kernel[0]: Longterm timer threshold: 1000 ms
Mar 3 11:30:05 localhost kernel[0]: PMAP: PCID enabled
Mar 3 11:30:05 localhost kernel[0]: Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Mar 3 11:30:05 localhost kernel[0]: vm_page_bootstrap: 1983425 free pages and 97343 wired pages
Mar 3 11:30:05 localhost kernel[0]: kext submap [0xffffff7f807a6000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a6000]
Mar 3 11:30:05 localhost kernel[0]: zone leak detection enabled
Mar 3 11:30:05 localhost kernel[0]: "vm_compressor_mode" is 4
Mar 3 11:30:05 localhost kernel[0]: standard timeslicing quantum is 10000 us
Mar 3 11:30:05 localhost kernel[0]: standard background quantum is 2500 us
Mar 3 11:30:05 localhost kernel[0]: mig_table_max_displ = 74
Mar 3 11:30:05 localhost kernel[0]: TSC Deadline Timer supported and enabled
Mar 3 11:30:05 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
Mar 3 11:30:05 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
Mar 3 11:30:05 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
Mar 3 11:30:05 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
Mar 3 11:30:05 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
Mar 3 11:30:05 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
Mar 3 11:30:05 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
Mar 3 11:30:05 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
Mar 3 11:30:05 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Mar 3 11:30:05 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Mar 3 11:30:05 localhost kernel[0]: calling mpo_policy_init for Sandbox
Mar 3 11:30:05 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
Mar 3 11:30:05 localhost kernel[0]: calling mpo_policy_init for Quarantine
Mar 3 11:30:05 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
Mar 3 11:30:05 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Mar 3 11:30:05 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Mar 3 11:30:05 localhost kernel[0]: MAC Framework successfully initialized
Mar 3 11:30:05 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
Mar 3 11:30:05 localhost kernel[0]: AppleKeyStore starting (BUILT: Sep 19 2013 22:20:34)
Mar 3 11:30:05 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Mar 3 11:30:05 localhost kernel[0]: ACPI: sleep states S3 S4 S5
Mar 3 11:30:05 localhost kernel[0]: pci (build 20:00:24 Jan 16 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
Mar 3 11:30:05 localhost kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 6689
Mar 3 11:30:05 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 19:46:50 Jan 16 2014) initialization complete
Mar 3 11:29:54 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Mar 3 11:30:05 localhost kernel[0]: [ PCI configuration begin ]
Mar 3 11:30:05 localhost kernel[0]: console relocated to 0xf90010000
Mar 3 11:30:05 localhost kernel[0]: [ PCI configuration end, bridges 12, devices 18 ]
Mar 3 11:30:05 localhost kernel[0]: mcache: 8 CPU(s), 64 bytes CPU cache line size
Mar 3 11:29:54 localhost com.apple.launchd[1]: *** Shutdown logging is enabled. ***
Mar 3 11:30:05 localhost kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
Mar 3 11:30:05 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
Mar 3 11:30:05 localhost kernel[0]: rooting via boot-uuid from /chosen: 278FA782-15F5-3827-9A81-43DEB73FA45E
Mar 3 11:30:05 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Mar 3 11:30:05 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
Mar 3 11:30:05 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
Mar 3 11:30:05 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
Mar 3 11:30:05 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
Mar 3 11:30:05 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
Mar 3 11:30:05 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HTS545050B9A302 Media/IOGUIDPartitionScheme/Customer@2
Mar 3 11:30:05 localhost kernel[0]: BSD root: disk0s2, major 1, minor 2
Mar 3 11:30:05 localhost kernel[0]: BTCOEXIST off
Mar 3 11:30:05 localhost kernel[0]: BRCM tunables:
Mar 3 11:30:05 localhost kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128]
Mar 3 11:30:05 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 70cd60fffed498ea; max speed s800.
Mar 3 11:30:05 localhost kernel[0]: hfs: mounted Macintosh HD on device root_device
Mar 3 11:30:05 localhost kernel[0]: Thunderbolt Self-Reset Count = 0xedefbe00
Mar 3 11:30:05 localhost kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
Mar 3 11:30:13 localhost kernel[0]: VM Swap Subsystem is ON
Mar 3 11:30:14 localhost hidd[50]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
Mar 3 11:30:14 localhost hidd[50]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Mar 3 11:30:14 localhost com.apple.SecurityServer[15]: Session 100000 created
Mar 3 11:30:14 localhost distnoted[68]: # distnote server daemon absolute time: 22.597465450 civil time: Mon Mar 3 11:30:14 2014 pid: 68 uid: 0 root: yes
Mar 3 11:30:14 localhost distnoted[68]: assertion failed: 13C64: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
Mar 3 11:30:15 localhost kdc[48]: krb5_kdc_set_dbinfo: failed to create root node: /Local/Default
Mar 3 11:30:15 localhost com.apple.launchd[1] (com.apple.Kerberos.kdc[48]): Exited with code: 1
Mar 3 11:30:15 localhost com.apple.launchd[1] (com.apple.Kerberos.kdc): Throttling respawn: Will start in 6 seconds
Mar 3 11:30:15 localhost kernel[0]: AGC: 3.4.35, HW version=1.9.23, flags:0, features:20600
Mar 3 11:30:15 localhost kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
Mar 3 11:30:15 localhost kernel[0]: SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
Mar 3 11:30:15 localhost kernel[0]: SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
Mar 3 11:30:15 localhost kernel[0]: SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
Mar 3 11:30:15 localhost kernel[0]: SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
Mar 3 11:30:15 localhost kernel[0]: Previous Shutdown Cause: 5
Mar 3 11:30:15 localhost kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
Mar 3 11:30:15 localhost kernel[0]: IOBluetoothUSBDFU::probe
Mar 3 11:30:15 localhost kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0042
Mar 3 11:30:15 localhost kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xd000 ****
Mar 3 11:30:15 localhost kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xd000 ****
Mar 3 11:30:16 localhost com.apple.SecurityServer[15]: Entering service
Mar 3 11:30:16 localhost aosnotifyd[66]: aosnotifyd has been launched
Mar 3 11:30:16 localhost aosnotifyd[66]: assertion failed: 13C64: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
Mar 3 11:30:16 localhost awacsd[63]: Starting awacsd connectivity_executables-97 (Aug 24 2013 23:49:23)
Mar 3 11:30:16 localhost awacsd[63]: InnerStore CopyAllZones: no info in Dynamic Store
Mar 3 11:30:16 localhost UserEventAgent[11]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
Mar 3 11:30:16 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
Mar 3 11:30:16 localhost kernel[0]: IO80211Interface::efiNVRAMPublished():
Mar 3 11:30:16 localhost mDNSResponder[41]: mDNSResponder mDNSResponder-522.90.2 (Nov 3 2013 18:51:09) starting OSXVers 13
Mar 3 11:30:16 localhost com.apple.usbmuxd[23]: usbmuxd-327.4 on Feb 12 2014 at 14:54:33, running 64 bit
Mar 3 11:30:16 localhost systemkeychain[85]: done file: /var/run/systemkeychaincheck.done
Mar 3 11:30:16 localhost mDNSResponder[41]: D2D_IPC: Loaded
Mar 3 11:30:16 localhost mDNSResponder[41]: D2DInitialize succeeded
Mar 3 11:30:16 localhost mDNSResponder[41]: 4: Listening for incoming Unix Domain Socket client requests
Mar 3 11:30:16 localhost networkd[100]: networkd.100 built Aug 24 2013 22:08:46
Mar 3 11:30:16 localhost kernel[0]: Waiting for DSMOS...
Mar 3 11:30:16 localhost UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
Mar 3 11:30:16 localhost digest-service[102]: label: default
Mar 3 11:30:16 localhost digest-service[102]: dbname: od:/Local/Default
Mar 3 11:30:16 localhost digest-service[102]: mkey_file: /var/db/krb5kdc/m-key
Mar 3 11:30:16 localhost digest-service[102]: acl_file: /var/db/krb5kdc/kadmind.acl
Mar 3 11:30:17 localhost kernel[0]: createVirtIf(): ifRole = 1
Mar 3 11:30:17 localhost kernel[0]: in func createVirtualInterface ifRole = 1
Mar 3 11:30:17 localhost airportd[67]: airportdProcessDLILEvent: en1 attached (down)
Mar 3 11:30:17 localhost kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1
Mar 3 11:30:17 localhost kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
Mar 3 11:30:17 localhost kernel[0]: Created virtif 0xffffff80194fd800 p2p0
Mar 3 11:30:17 localhost digest-service[102]: digest-request: uid=0
Mar 3 11:30:17 localhost mdmclient[42]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
Mar 3 11:30:18 localhost digest-service[102]: digest-request: netr probe 0
Mar 3 11:30:18 localhost digest-service[102]: digest-request: init request
Mar 3 11:30:18 localhost digest-service[102]: digest-request: init return domain: BUILTIN server: LOCALHOST indomain was: <NULL>
Mar 3 11:30:18 localhost kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
Mar 3 11:30:18 localhost kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
Mar 3 11:30:18 localhost airportd[67]: _handleLinkEvent: WiFi is not powered. Resetting state variables.
Mar 3 11:30:18 localhost locationd[46]: Incorrect NSStringEncoding value 0x8000100 detected. Assuming NSASCIIStringEncoding. Will stop this compatiblity mapping behavior in the near future.
Mar 3 11:30:18 localhost locationd[46]: NBB-Could not get UDID for stable refill timing, falling back on random
Mar 3 11:30:18 localhost apsd[65]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
Mar 3 11:30:18 localhost locationd[46]: Location icon should now be in state 'Inactive'
Mar 3 11:30:19 localhost configd[17]: dhcp_arp_router: en1 SSID unavailable
Mar 3 11:30:19 localhost com.apple.launchd[1] (com.apple.Kerberos.kdc): Throttling respawn: Will start in 2 seconds
Mar 3 11:30:19 localhost configd[17]: network changed: DNS*
Mar 3 11:30:19 imac-3.local configd[17]: setting hostname to "walters-imac-3.local"
Mar 3 11:30:20 imac-3 kernel[0]: en1: 802.11d country code set to 'US'.
Mar 3 11:30:20 imac-3 kernel[0]: 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
Mar 3 11:30:20 imac-3.local mDNSResponder[41]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F9624801F60 imac-3.local. (Addr) that's already in the list
Mar 3 11:30:20-imac-3.local mDNSResponder[41]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F96248023F0 1.0.0.127.in-addr.arpa. (PTR) that's already in the list
Mar 3 11:30:20-imac-3.local mDNSResponder[41]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F9625005960-imac-3.local. (AAAA) that's already in the list
Mar 3 11:30:20-imac-3.local mDNSResponder[41]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F9625005DF0 E.0.C.D.9.0.E.F.F.F.7.4.8.F.2.E.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
Mar 3 11:30:20-imac-3 com.apple.launchd[1] (com.apple.Kerberos.kdc): Throttling respawn: Will start in 1 seconds
Mar 3 11:30:21 --- last message repeated 1 time ---
Mar 3 11:30:21-imac-3.local kdc[117]: label: default
Mar 3 11:30:21-imac-3.local kdc[117]: dbname: od:/Local/Default
Mar 3 11:30:21-imac-3.local kdc[117]: mkey_file: /var/db/krb5kdc/m-key
Mar 3 11:30:21-imac-3.local kdc[117]: acl_file: /var/db/krb5kdc/kadmind.acl
Mar 3 11:30:21-imac-3.local kdc[117]: KDC started
Mar 3 11:30:21-imac-3 kernel[0]: init
Mar 3 11:30:21-imac-3 kernel[0]: probe
Mar 3 11:30:21-imac-3 kernel[0]: start
Mar 3 11:30:21-imac-3 kernel[0]: DSMOS has arrived
Mar 3 11:30:21-imac-3 kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xd000
Mar 3 11:30:21-imac-3 kernel[0]: [IOBluetoothHCIController][start] -- completed
Mar 3 11:30:21-imac-3.local loginwindow[44]: Login Window Application Started
Mar 3 11:30:21-imac-3 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Mar 3 11:30:21-imac-3 kernel[0]: **** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0x2740 -- 0x7800 -- 0xd000 ****
Mar 3 11:30:21-imac-3.local WindowServer[119]: Server is starting up
Mar 3 11:30:21-imac-3.local blued[61]: hostControllerOnline - Number of Paired devices = 0, List of Paired devices = (null)
Mar 3 11:30:21-imac-3.local mds[40]: (Normal) FMW: FMW 0 0
Mar 3 11:30:21-imac-3.local mds[40]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
Mar 3 11:30:21 --- last message repeated 2 times ---
Mar 3 11:30:21-imac-3 kernel[0]: [AGPM Controller] build GPUDict by Vendor1002Device6760
Mar 3 11:30:21-imac-3 kernel[0]: en3: promiscuous mode enable succeeded
Mar 3 11:30:21-imac-3.local WindowServer[119]: Session 256 retained (2 references)
Mar 3 11:30:21-imac-3.local WindowServer[119]: Session 256 released (1 references)
Mar 3 11:30:21-imac-3.local WindowServer[119]: Session 256 retained (2 references)
Mar 3 11:30:22-imac-3.local WindowServer[119]: init_page_flip: page flip mode is on
Mar 3 11:30:22-imac-3 kernel[0]: MacAuthEvent en1 Auth result for: 68:7f:74:95:b3:73 MAC AUTH succeeded
Mar 3 11:30:22-imac-3 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
Mar 3 11:30:22-imac-3 kernel[0]: AirPort: Link Up on en1
Mar 3 11:30:22-imac-3 kernel[0]: en1: BSSID changed to 68:7f:74:95:b3:73
Mar 3 11:30:22-imac-3 kernel[0]: AirPort: RSN handshake complete on en1
Mar 3 11:30:22 -imac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
Mar 3 11:30:24-imac-3.local WindowServer[119]: Found 39 modes for display 0x00000000 [30, 9]
Mar 3 11:30:24-imac-3.local WindowServer[119]: Found 1 modes for display 0x00000000 [1, 0]
Mar 3 11:30:24 --- last message repeated 2 times ---
Mar 3 11:30:24-imac-3.local WindowServer[119]: mux_initialize: Mode is dynamic
Mar 3 11:30:24-imac-3.local WindowServer[119]: Found 39 modes for display 0x00000000 [30, 9]
Mar 3 11:30:24-imac-3.local WindowServer[119]: Found 1 modes for display 0x00000000 [1, 0]
Mar 3 11:30:24 --- last message repeated 1 time ---
Mar 3 11:30:24-imac-3.local WindowServer[119]: WSMachineUsesNewStyleMirroring: false
Mar 3 11:30:24-imac-3.local WindowServer[119]: Display 0x042728c2: GL mask 0x5; bounds (0, 0)[1440 x 900], 39 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca3, S/N 0, Unit 2, Rotation 0
UUID 0xe2d0b55c862d4b0eba07e1bd2579493f
Mar 3 11:30:24-imac-3.local WindowServer[119]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[3840 x 2160], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
Mar 3 11:30:24-imac-3.local WindowServer[119]: Display 0x003f0040: GL mask 0x10; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
Mar 3 11:30:24-imac-3.local WindowServer[119]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
Mar 3 11:30:24-imac-3.local WindowServer[119]: WSSetWindowTransform: Singular matrix
Mar 3 11:30:24 --- last message repeated 1 time ---
Mar 3 11:30:24-imac-3.local WindowServer[119]: Display 0x042728c2: GL mask 0x5; bounds (0, 0)[1440 x 900], 39 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca3, S/N 0, Unit 2, Rotation 0
UUID 0xe2d0b55c862d4b0eba07e1bd2579493f
Mar 3 11:30:24-imac-3.local WindowServer[119]: Display 0x003f003d: GL mask 0x2; bounds (2464, 0)[1 x 1], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
Mar 3 11:30:24-imac-3.local WindowServer[119]: Display 0x003f0040: GL mask 0x10; bounds (2465, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
Mar 3 11:30:24 walters-imac-3.local WindowServer[119]: Display 0x003f003f: GL mask 0x8; bounds (2466, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
Mar 3 11:30:24-imac-3.local WindowServer[119]: CGXPerformInitialDisplayConfiguration
Mar 3 11:30:24-imac-3.local WindowServer[119]: Display 0x042728c2: Unit 2; Alias(2, 0x5); Vendor 0x610 Model 0x9ca3 S/N 0 Dimensions 13.03 x 8.15; online enabled built-in, Bounds (0,0)[1440 x 900], Rotation 0, Resolution 1
Mar 3 11:30:24-imac-3.local WindowServer[119]: Display 0x003f003d: Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2464,0)[1 x 1], Rotation 0, Resolution 1
Mar 3 11:30:24-imac-3.local WindowServer[119]: Display 0x003f0040: Unit 4; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2465,0)[1 x 1], Rotation 0, Resolution 1
Mar 3 11:30:24-imac-3.local WindowServer[119]: Display 0x003f003f: Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2466,0)[1 x 1], Rotation 0, Resolution 1
Mar 3 11:30:24-imac-3.local WindowServer[119]: CGXMuxBoot: Boot normal
Mar 3 11:30:24-imac-3.local WindowServer[119]: GLCompositor: GL renderer id 0x01024301, GL mask 0x00000003, accelerator 0x00004d2b, unit 0, caps QEX|MIPMAP, vram 451 MB
Mar 3 11:30:24-imac-3.local WindowServer[119]: GLCompositor: GL renderer id 0x01024301, GL mask 0x00000003, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
Mar 3 11:30:24-imac-3.local WindowServer[119]: GLCompositor: GL renderer id 0x01021b07, GL mask 0x0000001c, accelerator 0x000048c3, unit 2, caps QEX|MIPMAP, vram 256 MB
Mar 3 11:30:24-imac-3.local WindowServer[119]: GLCompositor: GL renderer id 0x01021b07, GL mask 0x0000001c, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
Mar 3 11:30:24-imac-3.local WindowServer[119]: GLCompositor enabled for tile size [256 x 256]
Mar 3 11:30:24-imac-3.local WindowServer[119]: CGXGLInitMipMap: mip map mode is on
Mar 3 11:30:25-imac-3.local loginwindow[44]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
Mar 3 11:30:25-imac-3 kernel[0]: nspace-handler-set-snapshot-time: 1393864227
Mar 3 11:30:25-imac-3.local com.apple.mtmd[39]: Set snapshot time: 2014-03-03 11:30:27 -0500 (current time: 2014-03-03 11:30:25 -0500)
Mar 3 11:30:25-imac-3.local WindowServer[119]: Display 0x042728c2: Unit 2; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
Mar 3 11:30:25-imac-3.local launchctl[138]: com.apple.findmymacmessenger: Already loaded
Mar 3 11:30:25-imac-3.local com.apple.SecurityServer[15]: Session 100005 created
Mar 3 11:30:25-imac-3.local UserEventAgent[140]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
Mar 3 11:30:25-imac-3.local loginwindow[44]: Setting the initial value of the magsave brightness level 1
Mar 3 11:30:25-imac-3.local loginwindow[44]: Login Window Started Security Agent
Mar 3 11:30:26-imac-3.local UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'MyWireless' making interface primary (protected network)
Mar 3 11:30:26-imac-3.local configd[17]: network changed: DNS* Proxy
Mar 3 11:30:26-imac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
Mar 3 11:30:26-imac-3.local UserEventAgent[11]: Captive: en1: Probing 'MyWireless'
Mar 3 11:30:26-imac-3.local WindowServer[119]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
Mar 3 11:30:26-imac-3.local WindowServer[119]: Received display connect changed for display 0x42728c2
Mar 3 11:30:26-imac-3.local WindowServer[119]: Found 15 modes for display 0x042728c2 [10, 5]
Mar 3 11:30:26-imac-3.local WindowServer[119]: CGXMuxAcknowledge: Posting glitchless acknowledge
Mar 3 11:30:26-imac-3.local WindowServer[119]: Received display connect changed for display 0x42728c2
Mar 3 11:30:26-imac-3.local WindowServer[119]: Found 1 modes for display 0x042728c2 [1, 0]
Mar 3 11:30:26-imac-3.local WindowServer[119]: Received display connect changed for display 0x3f003f
Mar 3 11:30:26-imac-3.local WindowServer[119]: Found 1 modes for display 0x003f003f [1, 0]
Mar 3 11:30:26-imac-3.local WindowServer[119]: Received display connect changed for display 0x3f0040
Mar 3 11:30:26-imac-3.local WindowServer[119]: Found 1 modes for display 0x003f0040 [1, 0]
Mar 3 11:30:27-imac-3.local configd[17]: network changed: v4(en1!:192.168.1.100) DNS+ Proxy+ SMB
Mar 3 11:30:27-imac-3.local WindowServer[119]: _CGXGLDisplayContextForDisplayDevice: acquired display context (0x7fd409d063f0) - enabling OpenGL
Mar 3 11:30:28-imac-3.local mtmfs[38]: mount succeeded for /Volumes/MobileBackups
Mar 3 11:30:28-imac-3.local mds[40]: (Normal) Volume: volume:0x7fae1a823000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/MobileBackups
Mar 3 11:30:28-imac-3.local mds[40]: (Normal) Volume: volume:0x7fae1a823000 ********** Created snapshot backup index
Mar 3 11:30:28-imac-3.local WindowServer[119]: Display 0x042728c2: Unit 2; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
Mar 3 11:30:28-imac-3.local airportd[67]: _doAutoJoin: Already associated to “MyWireless”. Bailing on auto-join.
Mar 3 11:30:28-imac-3.local SecurityAgent[146]: This is the first run
Mar 3 11:30:28-imac-3.local SecurityAgent[146]: MacBuddy was run = 0
Mar 3 11:30:29-imac-3.local WindowServer[119]: Display 0x042728c2: Unit 2; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
Mar 3 11:30:29-imac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
Mar 3 11:30:32-imac-3.local ntpd[110]: proto: precision = 1.000 usec
Mar 3 11:30:34-imac-3.local awacsd[63]: Exiting
Mar 3 11:30:55-imac-3 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key B0PS (kSMCKeyNotFound)
Mar 3 11:30:55-imac-3 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key B0OS (kSMCKeyNotFound)
Mar 3 11:31:11-imac-3 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xd000 ****
Mar 3 11:31:57-imac-3.local distnoted[170]: # distnote server agent absolute time: 122.781746823 civil time: Mon Mar 3 11:31:57 2014 pid: 170 uid: 89 root: no
Mar 3 11:34:19-imac-3.local mds[40]: (Normal) Volume: volume:0x7fae20860000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/firmwaresyncd.Or8ufk
Mar 3 11:40:25-imac-3.local WindowServer[119]: device_generate_desktop_screenshot: authw 0x0(0), shield 0x0(0)
Mar 3 11:40:25-imac-3.local WindowServer[119]: device_generate_lock_screen_screenshot: authw 0x0(0), shield 0x0(0)
Mar 3 11:41:39-imac-3 kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
Mar 3 11:41:40-imac-3 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xd000 ****
Mar 3 11:41:40-imac-3.local ntpd[110]: ntpd: wake time set -0.413667 s
Mar 3 11:41:41-imac-3 kernel[0]: hibernate image path: /var/vm/sleepimage
Mar 3 11:41:41-imac-3 kernel[0]: efi pagecount 43
Mar 3 11:41:41-imac-3 kernel[0]: hibernate_page_list_setall(preflight 1) start 0xffffff80d811f000, 0xffffff80d815f000
Mar 3 11:41:42-imac-3 kernel[0]: hibernate_page_list_setall time: 187 ms
Mar 3 11:41:42-imac-3 kernel[0]: pages 541993, wire 209488, act 62351, inact 295, cleaned 0 spec 19, zf 1951, throt 0, compr 0, xpmapped 0
Mar 3 11:41:42-imac-3 kernel[0]: could discard act 7524 inact 6013 purgeable 14318 spec 240034 cleaned 0
Mar 3 11:41:42-imac-3 kernel[0]: hibernate_page_list_setall preflight pageCount 274104 est comp 50 setfile 594876320 min 4294967296
Mar 3 11:41:42-imac-3 kernel[0]: AppleThunderboltHAL::earlyWake - complete - took 0 milliseconds
Mar 3 11:41:42-imac-3 kernel[0]: [0x2acc82c000, 0x32000000]
Mar 3 11:41:42-imac-3 kernel[0]: [0x2b6490e000, 0x19000000]
Mar 3 11:41:42-imac-3 kernel[0]: [0x2bc48e8000, 0x32000000]
Mar 3 11:41:42-imac-3 kernel[0]: [0x2c6481f000, 0x40000000]
Mar 3 11:41:42-imac-3 kernel[0]: [0x2ca481f000, 0xb000000]
Mar 3 11:41:42-imac-3 kernel[0]: [0x2d3481d000, 0x19000000]
Mar 3 11:41:42-imac-3 kernel[0]: [0x2d84934000, 0x1f000000]
Mar 3 11:41:42-imac-3 kernel[0]: [0x0, 0x0]
Mar 3 11:41:42-imac-3 kernel[0]: kern_open_file_for_direct_io(0) took 21 ms
Mar 3 11:41:42-imac-3 kernel[0]: Opened file /var/vm/sleepimage, size 4294967296, partition base 0x0, maxio 2000000 ssd 0
Mar 3 11:41:42-imac-3 kernel[0]: hibernate image major 1, minor 0, blocksize 4096, pollers 5
Mar 3 11:41:42-imac-3 kernel[0]: hibernate_alloc_pages act 84193, inact 8261, anon 2381, throt 0, spec 240053, wire 229621, wireinit 97343
Mar 3 11:41:42-imac-3 kernel[0]: hibernate_setup(0) took 13 ms
Mar 3 11:41:42-imac-3 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xd000 ****
Mar 3 11:41:42-imac-3 kernel[0]: Thunderbolt Self-Reset Count = 0xedefbe00
Mar 3 11:41:47-imac-3 kernel[0]: hibernate_page_list_setall(preflight 0) start 0xffffff80d811f000, 0xffffff80d815f000
Mar 3 11:41:47-imac-3 kernel[0]: hibernate_page_list_setall time: 379 ms
Mar 3 11:41:47-imac-3 kernel[0]: pages 540297, wire 207784, act 62356, inact 297, cleaned 0 spec 19, zf 1951, throt 0, compr 0, xpmapped 14199
Mar 3 11:41:47-imac-3 kernel[0]: could discard act 7524 inact 6013 purgeable 14318 spec 240035 cleaned 0
Mar 3 11:41:47-imac-3 kernel[0]: hibernate_page_list_setall found pageCount 272407
Mar 3 11:41:47-imac-3 kernel[0]: IOHibernatePollerOpen, ml_get_interrupts_enabled 0
Mar 3 11:41:47-imac-3 kernel[0]: IOHibernatePollerOpen(0)
Mar 3 11:41:47-imac-3 kernel[0]: encryptStart 14060
Mar 3 11:41:47-imac-3 kernel[0]: bitmap_size 0x3f5a0, previewSize 0x4f6798, writing 270854 pages @ 0x549d98
Mar 3 11:41:47-imac-3 kernel[0]: encryptEnd 538ae00
Mar 3 11:41:47-imac-3 kernel[0]: image1Size 0x9264000, encryptStart1 0x14060, End1 0x538ae00
Mar 3 11:41:47-imac-3 kernel[0]: encryptStart 9264000
Mar 3 11:41:47-imac-3 kernel[0]: encryptEnd 10cc8600
Mar 3 11:41:47-imac-3 kernel[0]: PMStats: Hibernate write took 3848 ms
Mar 3 11:41:47-imac-3 kernel[0]: all time: 3848 ms, comp bytes: 1109782528 time: 693 ms 1525 Mb/s, crypt bytes: 215856032 time: 425 ms 483 Mb/s,
Mar 3 11:41:47-imac-3 kernel[0]: image 281841664 (6%), uncompressed 1109782528 (270943), compressed 274692368 (24%), sum1 1a7db691, sum2 5851d8ce
Mar 3 11:41:47-imac-3 kernel[0]: zeroPageCount 119992, wiredPagesEncrypted 142036, wiredPagesClear 64284, dirtyPagesEncrypted 64623
Mar 3 11:41:47-imac-3 kernel[0]: hibernate_write_image done(0)
Mar 3 11:41:47-imac-3 kernel[0]: sleep
Mar 3 11:41:47-imac-3 kernel[0]: Wake reason: EC.PowerButton PWRB (User)
Mar 3 11:45:01-imac-3 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
Mar 3 11:45:01-imac-3 kernel[0]: Previous Sleep Cause: 5
Mar 3 11:45:01-imac-3 kernel[0]: AppleThunderboltHAL::earlyWake - complete - took 1 milliseconds
Mar 3 11:45:01-imac-3 kernel[0]: Thunderbolt Self-Reset Count = 0xedefbe00
Mar 3 11:45:01-imac-3 kernel[0]: TBT W (1): 0 [x]
Mar 3 11:45:01-imac-3 kernel[0]: wlEvent: en1 en1 Link DOWN virtIf = 0
Mar 3 11:45:01-imac-3 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
Mar 3 11:45:01-imac-3 kernel[0]: en1: 802.11d country code set to 'X0'.
Mar 3 11:45:01-imac-3 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
Mar 3 11:45:01-imac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Inactive
Mar 3 11:45:01-imac-3.local configd[17]: network changed: v4(en1-:192.168.1.100) DNS- Proxy-
Mar 3 11:45:01-imac-3.local netbiosd[153]: network_reachability_changed : network is not reachable, netbiosd is shutting down
Mar 3 11:45:01-imac-3 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Resume -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xd000 ****
Mar 3 11:45:01-imac-3.local WindowServer[119]: CGXDisplayDidWakeNotification [713009376958]: posting kCGSDisplayDidWake
Mar 3 11:45:01-imac-3.local WindowServer[119]: handle_will_sleep_auth_and_shield_windows: NULL shield_window (lock state: 3)
Mar 3 11:45:09-imac-3 kernel[0]: en1: 802.11d country code set to 'SG'.
Mar 3 11:45:09-imac-3 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 149 153 157 161 165
Mar 3 11:45:10-imac-3 kernel[0]: MacAuthEvent en1 Auth result for: 68:7f:74:95:b3:73 MAC AUTH succeeded
Mar 3 11:45:10-imac-3 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
Mar 3 11:45:10-imac-3 kernel[0]: AirPort: Link Up on en1
Mar 3 11:45:10-imac-3 kernel[0]: en1: BSSID changed to 68:7f:74:95:b3:73
Mar 3 11:45:10-imac-3 kernel[0]: AirPort: RSN handshake complete on en1
Mar 3 11:45:10-imac-3 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
Mar 3 11:45:11-imac-3.local UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'MyWireless' making interface primary (cache indicates network not captive)
Mar 3 11:45:11-imac-3.local configd[17]: network changed: DNS* Proxy
Mar 3 11:45:11-imac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
Mar 3 11:45:11-imac-3.local UserEventAgent[11]: Captive: en1: Not probing 'MyWireless' (cache indicates not captive)
Mar 3 11:45:11-imac-3.local UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
Mar 3 11:45:11-imac-3.local configd[17]: network changed: v4(en1!:192.168.1.100) DNS+ Proxy+ SMB
Mar 3 11:45:17-imac-3.local SecurityAgent[146]: User info context values set for kathleen1
Mar 3 11:45:18-imac-3.local loginwindow[44]: Login Window - Returned from Security Agent
Mar 3 11:45:18-imac-3.local loginwindow[44]: USER_PROCESS: 44 console
Mar 3 11:45:18-imac-3.local airportd[67]: _doAutoJoin: Already associated to “MyWireless”. Bailing on auto-join.
Mar 3 11:45:18-imac-3 kernel[0]: AppleKeyStore:Sending lock change 0
Mar 3 11:45:18 --- last message repeated 1 time ---
Mar 3 11:45:18-imac-3 com.apple.launchd.peruser.503[185]: Background: Aqua: Registering new GUI session.
Mar 3 11:45:18-imac-3 com.apple.launchd.peruser.503[185] (com.apple.EscrowSecurityAlert): Unknown key: seatbelt-profiles
Mar 3 11:45:18-imac-3 com.apple.launchd.peruser.503[185] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Mar 3 11:45:18-imac-3.local launchctl[187]: com.apple.pluginkit.pkd: Already loaded
Mar 3 11:45:18-imac-3.local launchctl[187]: com.apple.sbd: Already loaded
Mar 3 11:45:18-imac-3.local distnoted[189]: # distnote server agent absolute time: 730.554072877 civil time: Mon Mar 3 11:45:18 2014 pid: 189 uid: 503 root: no
Mar 3 11:45:21-imac-3.local sharingd[209]: Starting Up...
Mar 3 11:45:21-imac-3.local WindowServer[119]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
Mar 3 11:45:21-imac-3.local WindowServer[119]: Display 0x042728c2: Unit 2; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
Mar 3 11:45:21-imac-3.local UserEventAgent[188]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelDevice.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelSharedUserClient.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDSIVideoContext.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class Gen6DVDContext.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelDevice.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelSharedUserClient.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMain.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMedia.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextVEBox.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOHIDParamUserClient.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOSurfaceRootUserClient.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.AirPlayXPCHelper.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.blued.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.blued.
Mar 3 11:45:21-imac-3.local com.apple.audio.DriverHelper[201]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
Mar 3 11:45:22-imac-3.local SystemUIServer[196]: Cannot find executable for CFBundle 0x7fb8e3a30740 </System/Library/CoreServices/Menu Extras/Clock.menu> (not loaded)
Mar 3 11:45:22-imac-3.local SystemUIServer[196]: Cannot find executable for CFBundle 0x7fb8e3a31e40 </System/Library/CoreServices/Menu Extras/Battery.menu> (not loaded)
Mar 3 11:45:22-imac-3.local SystemUIServer[196]: Cannot find executable for CFBundle 0x7fb8e3a32510 </System/Library/CoreServices/Menu Extras/Volume.menu> (not loaded)
Mar 3 11:45:22-imac-3.local KiesAgent[240]: KiesAgent started, 7
Mar 3 11:45:22-imac-3.local WiFiKeychainProxy[220]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineCreate: created...
Mar 3 11:45:22-imac-3.local WiFiKeychainProxy[220]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
Mar 3 11:45:23-imac-3.local com.apple.IconServicesAgent[243]: IconServicesAgent launched.
Mar 3 11:45:23-imac-3.local WindowServer[119]: disable_update_timeout: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
Mar 3 11:45:23-imac-3.local WindowServer[119]: common_reenable_update: UI updates were finally reenabled by application "SystemUIServer" after 1.06 seconds (server forcibly re-enabled them after 1.00 seconds)
Mar 3 11:45:23-imac-3.local com.apple.SecurityServer[15]: Session 100008 created
Mar 3 11:45:23-imac-3 accountsd[246]: assertion failed: 13C64: liblaunch.dylib + 25164 [38D1AB2C-A476-385F-8EA8-7AB604CA1F89]: 0x25
Mar 3 11:45:23-imac-3.local SystemUIServer[196]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Mar 3 11:45:23-imac-3.local SystemUIServer[196]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Mar 3 11:45:23-imac-3.local KiesAgent[240]: checkAutoStart (null)
Mar 3 11:45:24-imac-3.local com.apple.SecurityServer[15]: Session 100011 created
Mar 3 11:45:25-imac-3.local apsd[219]: Unrecognized leaf certificate
Mar 3 11:45:26-imac-3.local com.apple.time[188]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
Mar 3 11:45:28 --- last message repeated 1 time ---
Mar 3 11:45:28-imac-3.local secd[242]: __EnsureFreshParameters_block_invoke_2 SOSCloudKeychainSynchronizeAndWait: The operation couldn’t be completed. (SyncedDefaults error 1025 - Remote error : No valid account for KVS)
Mar 3 11:45:28-imac-3.local secd[242]: __talkWithKVS_block_invoke callback error: The operation couldn’t be completed. (SyncedDefaults error 1025 - Remote error : No valid account for KVS)
Mar 3 11:45:30-imac-3.local secd[242]: SecErrorGetOSStatus unknown error domain: com.apple.security.sos.error for error: The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
Mar 3 11:45:30-imac-3.local secd[242]: securityd_xpc_dictionary_handler WiFiKeychainProx[220] DeviceInCircle The operation couldn’t be completed. (com.apple.security.sos.error error 2 - Public Key not available - failed to register before call)
Mar 3 11:45:38-imac-3.local imagent[228]: [Warning] Services all disappeared, removing all dependent devices
Mar 3 11:45:39 walters-imac-3.local parentalcontrolsd[266]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
Mar 3 11:45:41-imac-3.local imagent[228]: [Warning] Creating empty account: PlaceholderAccount for service: IMDService (iMessage)
Mar 3 11:45:42 --- last message repeated 1 time ---
Mar 3 11:45:42-imac-3.local soagent[222]: [Warning] Services all disappeared, removing all dependent devices
Mar 3 11:45:42-imac-3.local soagent[222]: No active accounts, killing soagent in 10 seconds
Mar 3 11:45:44 --- last message repeated 1 time ---
Mar 3 11:45:44-imac-3.local Microsoft Entourage[268]: OTAtomicAdd32 is deprecated and will be removed soon. Please stop using it.
Mar 3 11:45:48-imac-3.local sandboxd[264] ([263]): storeagent(263) deny file-read-data /Users/1/Library/Preferences/com.apple.WebFoundation.plist
Mar 3 11:45:48 walters-imac-3.local usernoted[217]: Connection does not have the proper entitlement (com.apple.private.notificationcenter-system) to connect to the system notification center. All communication will be denied. center com.apple.storeagent
Mar 3 11:45:48-imac-3.local usernoted[217]: Connection does not have the proper entitlement (com.apple.developer.notificationcenter-identifiers) to connect on behalf of com.apple.appstore. All communication will be denied.
Mar 3 11:45:49-imac-3.local bookstoreagent[275]: DownloadManifest: Error moving legacy manifest - Error Domain=NSCocoaErrorDomain Code=513 "“manifest.plist” couldn’t be moved because you don’t have permission to access “com.apple.iBooksX”." UserInfo=0x7faa48d13f40 {NSSourceFilePathErrorKey=/Users/1/Library/Application Support/AppStore/manifest.plist, NSUserStringVariant=(
Move
), NSDestinationFilePath=/var/folders/st/k9plffx91lzbwlv6f3db2n2m0000gq/C/com.appl e.iBooksX/manifest.plist, NSFilePath=/Users/1/Library/Application Support/AppStore/manifest.plist, NSUnderlyingError=0x7faa48d13240 "The operation couldn’t be completed. Operation not permitted"}
Mar 3 11:45:49-imac-3.local bookstoreagent[275]: DownloadManifest: Error removing legacy download location - Error Domain=NSCocoaErrorDomain Code=513 "“AppStore” couldn’t be removed because you don’t have permission to access it." UserInfo=0x7faa4a9041c0 {NSFilePath=/Users/kathleen1/Library/Application Support/AppStore, NSUserStringVariant=(
Remove
), NSUnderlyingError=0x7faa4a904050 "The operation couldn’t be completed. Operation not permitted"}
Mar 3 11:45:49-imac-3.local sandboxd[264] ([275]): bookstoreagent(275) deny file-write-unlink /Users/kathleen1/Library/Application Support/AppStore/manifest.plist
Mar 3 11:45:49 --- last message repeated 1 time ---
Mar 3 11:45:49-imac-3.local sandboxd[264] ([275]): bookstoreagent(275) deny file-write-unlink /Users/kathleen1/Library/Application Support/AppStore
Mar 3 11:45:50-imac-3.local sandboxd[264] ([275]): bookstoreagent(275) deny file-read-data /Users/1/Library/Application Support/AppStore
Mar 3 11:45:50-imac-3.local sandboxd[264] ([275]): bookstoreagent(275) deny file-read-data /Users/kathleen1/Library/Preferences/com.apple.WebFoundation.plist
Mar 3 11:45:51-imac-3.local Microsoft Database Daemon[277]: OTAtomicAdd32 is deprecated and will be removed soon. Please stop using it.
Mar 3 11:45:52-imac-3.local Microsoft Entourage[268]: OTInetGetInterfaceInfo is unimplemented and will be removed soon. Please stop using it.
Mar 3 11:45:52-imac-3.local soagent[222]: Killing soagent.
Mar 3 11:45:52-imac-3.local NotificationCenter[225]: SOHelperCenter main connection interrupted
Mar 3 11:45:52-imac-3.local com.apple.dock.extra[252]: SOHelperCenter main connection interrupted
Mar 3 11:45:52-imac-3.local imagent[228]: [Warning] Denying xpc connection, task does not have entitlement: com.apple.private.icfcallserver (soagent:222)
Mar 3 11:45:56 --- last message repeated 1 time ---
Mar 3 11:45:56-imac-3.local iTunes[271]: ApplePushService: APSConnection being used without a delegate queue
Mar 3 11:46:00-imac-3 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xd000 ****
Mar 3 11:46:00-imac-3.local Microsoft Entourage[268]: OTAtomicAdd8 is deprecated and will be removed soon. Please stop using it.
Mar 3 11:46:00-imac-3.local Microsoft Entourage[268]: OTCompareAndSwap8 is deprecated and will be removed soon. Please stop using it.
Mar 3 11:46:00-imac-3.local Microsoft Database Daemon[277]: OTAtomicAdd8 is deprecated and will be removed soon. Please stop using it.
Mar 3 11:46:00-imac-3.local Microsoft Database Daemon[277]: OTCompareAndSwap8 is deprecated and will be removed soon. Please stop using it.
Mar 3 11:46:01-imac-3.local Microsoft Entourage[268]: The function `CGSFlushWindow' is obsolete and will be removed in an upcoming update. Unfortunately, this application, or a library it uses, is using this obsolete function, and is thereby contributing to an overall degradation of system performance. Please use `CGSFlushWindowContentRegion' instead.
Mar 3 11:46:04-imac-3.local Microsoft Entourage[268]: OTCompareAndSwap32 is deprecated and will be removed soon. Please stop using it.
Mar 3 11:46:12-imac-3.local Microsoft Sync Services[283]: [0x17142e0] |ISyncManager|Warning| Sync Server is disabled.
Mar 3 11:49:58-imac-3.local Console[301]: setPresentationOptions called with NSApplicationPresentationFullScreen when there is no visible fullscreen window; this call will be ignored. -
Hello!
We are testing OWB+Disco+DB 10g to use in purchase department for analysis
DB 10.2.0
Disco 10.1.2
OWB 10.2.0.1
We have a ROLAP dimension with aprox 305000 elements designed in OWB and published to CWM2. Dimension PRODUCTS has 1 standard Hierarchy with
-17 elem. on first level
-150 elem. on second
-1000 elem. on third
-2500 elem. on fourth
-300000 elem. on fifth (articles level)
Table which is bound to that dimension is indexed on each surrogate and business key + HASH partitioned by DIMENSION_KEY PK.
We connect with Disco PLUS OLAP to this DB and find out that it is very slow on dimension ROLLUP. It takes up to 12 seconds to get 27 rows.
Performance monitoring is unable to collect exact statements in Enterprise manager but showed a heavy User IO, so we enabled OLAP logging using
alter system set sql_trace = true scope = spfile;
alter system set "_olap_continuous_trace_file" = true scope= spfile;
and collected SQL statements from UDUMP
it is quite big statements so there is no need to post it here but it executes exactly 12 second and retrieve correct rows from dimension.
We analyzed explain plan and find out that in fact it does not use indexes built on our dimension table. It uses FULL TABLE SCANS for ROLLUP clause which results in 1000 cost and 150000 cardinality and 12 seconds result of 27 rows.
Is it possible to solve this question? We would like to use Disco PLUS OLAP for analysis...
Thank you in advance
Regards,
Kirill BoykoFirst thank you for you answer! :)
Using MOLAP is more a DWH desing question
We are actually using MOLAP right now on 9.2.0.6. We using it for sales, financial and inflation analysis. We have four AW today
1. Detailed sales down to article/month (10Gb). We afraid of doing article/day on 9.2.0.6 because it will be 100Gb in size.
2. Fast summarized sales down to family/day (3Gb)
3. Detailed inflation down to article month (10Gb)
4. Fast financial data analysis account/month (2Gb). This is just migrated OFA.
What comes up after 1 year usage:
1/ AW 1 and 3 are not used like AW. No complex formulas or lag analysis. They are used just to see summaries by article for different periods/stores.
Conclusion: It means we store 10Gb for nothing because we MUST store them first in Relational tables after staging to populate AW. Plus we have problems with sparsity and loading time.
2/ AW 2 (which are just agregated part of AW 1 but daily) and AW 4 are quite used. There are a lot of formulas and lag analysis requests an them.
Conclusion: Better to stay with them. They are pretty useful. We do not have sparsity problem here and loading time is pretty good.
Now we would like to migrate on 10g and implement fast article/day analysis. We would like to improve
- storage
- loading and browsing speed
- logic, so decided to:
1. Migrate AW 1 to ROLAP for faster loading and less space consumed (no sparsity)
2. Stay with MOLAP on AW 2 and 4 and populate AW 2 from ROLAP
3. Migrate AW 3 to ROLAP for faster loading and less space consumed (no sparsity)
I prepaired a test environment and stuck with PRODUCT dimension ROLLUP :)
If you think that 10g compression and parttioning in MOLAP can give outstanding performance - OK, I will try. But again I suppose it is better to store sales tables in relational format and use AW only for ANALYSIS (lags and complex formulas), because it consumes space. -
Very slow rederting of PDF files
Keynote rendering of pdf gives amazing quality. However with a PDF which contains scientific data and many line objects it can be very very slow. For example a file which is 500KB can take 11 sec to render.
Exporting from Illustrator to tiff or PSD (150 dpi) usually result in noticable quality reduction, and also takes all the advantage of being able to presernt PDF in the first place.
Is there any simple workaround?
Thanks
Mickey
PB alu 1.67 Mac OS X (10.4.7)It seems that there a difference between the PDF rendering engine of keynote (which I suspect is the same one of preview) and the one of Adobe. The same PDF could be compressed to a very small file and open in a snap in Acrobat. But for preview it took few second to render. After cutting bits in an out I found the problematic object and remade it. This sloved the problem.
As a side effect I found out that by using Show package content, you can find the pasted PDF and edit it directly with Illustrator, without having to cut and paste or save and insert.
Maybe you are looking for
-
I have an iMac, and have a Verizon DSL account (3 email addresses). Recently, my Mac Mail keeps requesting the passwords on my accounts every few minutes, and will not allow me to send messages using Mac Mail (the message says that the outgoing serve
-
[solved] Laptop HDMI to *TV* not working
Update: I was about to post regarding have problems connecting my new Dell Laptop to my TV but I've managed to solve the issue by using a different HDMI cable! Why the original HDMI cable works with my old laptop but not the new one and why Dell supp
-
Encrypted Time Machine Backup on a Network Drive?
Hi I have a server (Mac Mini) in my LAN that I'd like the various Macs to be able to use it as the backup location, but I'd like the backups to be stored in an encrypted state. Any way I can do that? If not with the standard OS X options, perhaps wit
-
Bonjour doesn't recognize printer
I have a Vista 64bit machine with a Brother DCP 7020 printer connected via USB. I've installed Bonjour for Windows and it doesn't show the printer. My MBP can see the printer across the Airport network but cannot print. Any ideas why Bonjour isn't sh
-
Tax Form - W2 - MMREF - Field - T101
Hi , We are trying out the new W2 - MMREF Form for Connecticut. And we need to enter the State Employer Account Number in the RS record in location 248 - 267. The corresponding field in V_T51T3 is mapped to "T101" How can we set the value of "T101