NDF vs. DF when loading in material
I recently loaded footage from a Panasonic mini-DV tape with my Sony TRV 70 camera (copied from DVD) into FCP 5. The footage comes in as drop frame and I want *non-drop frame*. How can capture that footage correctly with my camcorder? My understanding was that these consumer cameras default to non-drop frame when recording.
Drop and non-drop does not matter for source footage. What matters is the timeline setting and how that corresponds to the tape you are mastering too.... and one step futher to the broadcast network that will be airing the tape. DF and NDF can both go on the same timeline. Whatever a source tape is (DF, NDF) can't be changed. And if you modify the timecode once captured you can never recapture it again should you need to.
Similar Messages
-
Error when loading a flat file
Hello,
I am trying to load a flat file into our BW for the first time. I keep getting the error:
Error 1 when loading external data
Message no. RSAR234
I have search SDN and looked at the OSS notes and have tried several suggestions, but I still cannot get the file to load. We are currently on version 3.5.
My transfer structure and flat file do match.
My transfer structure for IO_MAT_ATTR has a transfer method of PSA and is laid out as follows:
IO_MAT Material Number IO_MAT
IO_MATNM Material Name IO_MATNM
IO_MAT is: CHAR 15
IO_MATNM is: CHAR 30
My flat file is saved as a CSV and is as follows:
MATONE,TEA
MATTWO,COFFEE
My file is saved on my local PC and is not open when I try to load it. When I attempt to preview the file in my infopackage, I get the same error there as well.
Any suggestions would be greatly appreciated.
Thanks
CharlaHi Charla,
Error 1 means that the system is unable to access the file. Make sure that the path is correct and also check if the data separator is correctly defined in the "external tab" of the infopackage.
I guess the settings in the "external tab" of the infopackage have some issues.
Bye
Dinesh -
How to only update existing records when loading master data ?
Hello experts, I need your lights one more time.
Here is my need :
I have created an infoobject (IO) which is a very simple version of 0material, let's call it Znewmat --> Znewmat has material type and trademark as attributes, those two fields are available in 2 different datasources :
- 0MATERIAL_ATTR for material type (field MTART)
- 0MAT_SALES_ATTR for trademark (field MVGR2)
When loading my new IO from 0MATERIAL_ATTR I use a filter (at DTP level) to get only a few material types (I get something like 1000 records),
here is my issue : when I load from 0MAT_SALES_ATTR the field "material type" is not available to keep the same filter as for 0MATERIAL_ATTR and existing records are updated with the trademark, but I also get 5000 records I don't need, and my master data is "polluated" with useless lines.
*and my question : is there a way while performing the second loading to ONLY UPDATE EXISTING RECORDS AND NOT ADD ANY
NEW RECORDS ? (i didn't find anything in main options of my DTP)*
(I'd like to avoid the solution to update the 0MAT_SALES_ATTR datasource to add the missing field)
Thanks in advance for any help, points will be distributed.
Guillaume P.
Still no idea ?in the start routine of transformation from 0MAT_SALES_ATTR to znewmat do the following:
select materials from /BIC/PZNEWMAT into i_mat
for all entries in source_package where material eq source_package-material.
loop at source_package.
p_ind = sy-tabix.
read table i_mat with key material = source_package-material.
if sy-subrc ne 0.
delete i_mat index p_ind.
endif.
this way you'll only update records that have previously been loaded by 0MATERIAL_ATTR DS
loading sequence:
first load ZNEWMAT from 0MATERIAL_ATTR. then activate ZNEWMAT. then load 0MAT_SALES_ATTR to ZNEWMAT.
M. -
Inspection at vendor site while loading the material?
Hi All,
How we can enable the inspection while loading the material i.e at vendor's site, how we can enable the inspection while unloading the material at customer site.
That is I exactly require an inspection set up to record the values after PO & before GR and after PGI in sales. How do i enable the same/
regards,
Sanjanaafter PO & before GR
1. make qm procurement active
2. set a control key with delivery release, 01 inspection type active
3. create q info record qi01 for that material , plant , vendor- in inspection control tab enter01 insp. type
4. when po is created , go to qi07 select chedule line and click on inspection lot save
5. qa32 check for source inspection lot, this will be non stock relevent u can record results and defects
after PGI in sales
1. activate insp. type 10
2. create q info record for sales qv51- click on new info record.enter material and select after delivery
3. when pgi is done it will create inspection lot for recording purpose -
Hi Gurus,
I want to load excise duty on material. I maintain in FV11 condition records for Condition type JMIP.
Then what are total steps.?
Regards,
RohanDear Rohan,
I f you check your TAX procedure TAXINN, aganist each condition type there will be account key like VS1, VS2, VS3, NVV...... . These transcation key will effect whether the value in the cadition type should be loaded to material or set off.
In OBCN, we customize by flag / deflaging the Non-Deducatable check box.
Condition types that set off, the condition value will not be added to Net Price ( material). These you can take them to registers. As per indian excise rules you can take the credit on the duty paid on the raw material while paying the duty on finished goods. For this we have condition types that are set off and will be shown in registers as excise credit. These are like Basic ED, Ecess, ..... For this condition types we assign a transaction key the non-deductable check box will be empty in OBCN
Condition types that INV - Inventory, this condition value will be loaded on to the material when you take GR. These are like VAT, CST, LST....For these condition types you assign the transaction key for which you flagt the check box in OBCN.
Why SAP has given BED setoff, BED inv, BED inv qty, for different business scenorios where the duty paid can take credit or Inevtorize. If you are procuring material for Research purpose you can not take the Credit of the duty (BED, Ececss) in that case that plant customizes as the invenroty condition.
Hope this cleared you doubts,
Thanks & Regards,
Krishna Reddy -
Error 1003 when loading a VI dynamically on LabView Run-time ini file configuration
hi all,
I have a problem with my runtime excutable.
On 4 systems, all running XP it runs fine.
On 2 systems ( one a new install of just LVRT 2011 SP1 ) I have:
Error 1003 when loading a VI dynamically on LabView Real-time
Or more spoecifically the error code is 1003 and the error source is Open VI Reference.
When the RT app runs correctly I get these paths:
Path Sent to Open Vi Reference: Yeast_Grower.exe\Tecan_talk_Control.vi,
Path Returned from Open Vi Refence: C:\Program Files\Yeast_Grower\Yeast_Grower.exe\Tecan_talk_Control.vi,
On a system that does gets the 1003 Open Vi Refence error I have the same Path Sent but of course no path returned as it does not open.
To be sure that the vi Dyanmically called vi is compiled and valid at runtime I also include a copy of in the main.vi.
To be extra sure I have also installed the runtime versions of VISA and DAQmx.
I have compiled it with and without the "Use LV 8 calling hiaracy"
My conclusion as this stage is that either the installation of LVRT 2011SP1 misses something the earlier LVRT installtions make.
or is there a MyApp.ini or LVRT .ini that controls how the RT dyanim calls are handled.
Help very welcome how to solve this puzzle.
thanks
michaelI understand that all the PCs (6 of them) have LV 2011 SP1, runtime or the development system installed. Right?
How many of these PCs have the source code available on them?
-> Only one of them has the source code.
I am not sure I understood 'I also include a copy of in the main.vi'. Does it mean you placed the subvi in the main.vi?
-> I meant I have included in main.vi the actual vi that is called dynamically - but only where it is not called.
Did you try including the sub vi which is called dynamically, as 'Always included' in the EXE build?
-> No, I did not know of this option - but the above I did this by default.
Edit: Did you verify the software versions of LV RT, VISA etc on all the PCs? Are they same?
-> I did verify even added DAQmx just in case
There is lots of material available on this forum for error 1003 and dynamic vi calling. Did you find anything useful to try among the forums threads?
-> I did view many of them.
I did finally find the answer.
I have a subvi (callNet.vi ) in the dynamically called vi (dynamic ) that calls .Net libraries.
Now the thing is that this subvi callNet.vi is coded out by enclosing it in a Disable structure.
In fact this subvi ( callNet.vi) does not even compile - ie it has a broken arrow
however if enclosed in a Disabled structure and disabled, the enclosing vi compiles OK.
However I have discovered that even with the .Net calling subvi (callNet.vi) in the Disabled state of the Disabled structure
the enclosing vi (dynamic.vi ) does NOT run - although it compiles just fine.
Once I installed the .Net libraries (I actually did include them with my app installer ) with the vender's supplied installer
then my app now successfully calls the dynamic vi.
So the Summary and warning is: Even if the dynamic called vi is included in Main.vi and Main.exe runs ( but does not call the dynamic vi - except when called dynamically at later some point ) and even if, in this case, the .Net calling subvi is disabled out ie no .Net calls are made the dynamically called vi will not run when called dynamically.
I hope that is not too confusing. In summary it seems the Disable structure does not entirely disable.
Michael -
Freight loading on material at GR
Hi All,
In R/3 in tcode T_57, when I maintain the check in Header ONLY, then the inbound freight cost is getting loaded on material at GR. If I additionally maintain check in Leg also, then it is NOT getting loaded on the material.
why its so?
regards
DineshHi,
The frieght pick from Pricing procedure where defined from MM -Purchasing.
The FI consultant provide proper A/c key for each condition, Then only it works.
The trcode t_57 is for other purpose & not for this.
regards -
Hi All,
In R/3 in tcode T_57, when I maintain the check in Header ONLY, then the inbound freight cost is getting loaded on material at GR. If I additionally maintain check in Leg also, then it is NOT getting loaded on the material.
why its so?
regards
DineshHi,
The frieght pick from Pricing procedure where defined from MM -Purchasing.
The FI consultant provide proper A/c key for each condition, Then only it works.
The trcode t_57 is for other purpose & not for this.
regards -
How to load AFS Material Master records.
Hello everyone,
I am new to loading AFS Material Master records. In the past I have simply used the Material Master direct input programs, or batch input, to load the data. Because of the extra AFS fields, I was guessing there must be a new direct input program, or batch input, for it. Maybe there is a IDOC that must be used?
Any help will be appreciated. Thank you all.Hey there again, I just wanted to bring this subject back up again.
I always took it for granted the we loaded materials in batches. We would load basic data for some materials and then extend the plant data, then sales, storloc data, warehouse data. That is a total of 5 files one after the other. I never really thought of why we did this, but now that I think about it maybe we did because it only took a little bit of data to create the basic data. When you extend the plant data, you do not need to enter in the data already created from the initial basic data load. Sales data only required so much so you could skip all the unnecessary basic and plant data.
Is that why you loaded in batches, because it is easier to extend?
If you wanted to you could have all the basic, plant, sales, purchasing data on one record if you really wanted to. Why didnu2019t you do it that way?
Thanks for the input. -
Extension Manager CS6 freezes when loading extensions
Extension Manager CS6 freezes when loading extensions
When launching Extension Manager CS6 it starts loading extensions but totally freezes when the last 30 percent of the loading extension bar is still unaccomplished. It is not possible to close the window, not even with the task manager. I have restart the computer to get rid of it.
My OS is Windows 7, 64 bit. The most recent versions of the entire Adobe CS family are installed, freshly updated, including the Extension Manager CS6.
To trace the cause of the problem I tried to create a log file in the folder C:\Program Files (x86)\Adobe\Adobe Extension Manager CS6. I logged in as administrator and wrote in the Command Prompt Window:
echo > ExManLog.YES
The log file was created but contains nothing but "ECHO is on".
A possible cause of the problem might be that I have two installed active version of Ajatix Advanced CSS Drop Down Menu, which is an add-on to Dreamweaver. The first version is the free one, the second is the full paid version. I would like to deactivate the first one since which might make the Extension Manager happier. But the only way to deactivate it that I know of is to use the Extension Manager. Catch 22.Dear Carl, thanks for the advice that made me understand how to remove an extension without using the Extension Manager. However, the problem persists, i.e the Extension Manager freezes soon after it is launched, when the last 30 percent of the loading extension bar is still unaccomplished.
Following your instruction I have tried to remove both my versions of the troublesome DW extension (Ajatix Advanced CSS Drop Down Menu). Which in my case meant that I deleted the following files:
the files com.ajatix.AdvancedCSSMenuLight.mxi, com.ajatix.AdvancedCSSMenuLight.mxi_air and com.ajatix.AdvancedCSSMenuLight.zxp in C:\Users\<My UserName>\AppData\Roaming\Adobe\Extension Manager CS6\EM Store\Dreamweaver CS6
and the files ajxcssmenu2.3.0.mxi, ajxcssmenu2.3.0.mxi_air and ajxcssmenu2.3.0.mxp in C:\ProgramData\Adobe\Extension Manager CS6\EM Store\Dreamweaver CS6
In the hope of cleaning out everything from this extension I have also deleted the following files:
AJXCSSMenu.chm, AJXCSSMenu.dll in C:\Users\UpdatusUser\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\Configuration\JSExtensions
and AJXCSSMenu.chm, AJXCSSMenu.dll, AJXCSSMenuLight.chm, AJXCSSMenuLight.dll in C:\Users\ipb-master\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\Configuration\JSExtensions
Every time I thus get rid of the Ajitex files the Extension Manager seems happy and loads the only extension I currently have left (Adobe exchange). However when I reinstall the Ajitex extension, the Extension Manager behaves in the same bad manner, freezes after approximately 70 percent of the process of loading extensions. Same thing when I remove this extension and try to install another from Ajitex (Email Spam Blocker). It seems to install all right but afterward the Extension Manager freezes when launched.
Don't know what to do now. -
Errors when loading data to ODS
Hi,
I am getting the following dump when loading data to ODS
whta might be the problem
Runtime Error MESSAGE_TYPE_X
Date and Time 29.09.2006 14:26:52
ShrtText
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
Short text of error message:
Test message: SDOK_GET_PHIO_ACCESS 001
Technical information about the message:
Message classe...... "1R"
Number.............. 000
Variable 1.......... "SDOK_GET_PHIO_ACCESS"
Variable 2.......... 001
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPLSDCL" or "LSDCLF00"
"INTERNAL_ERROR"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "bomw093a"
Network address.......... "132.186.125.66"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 801586"
Character length......... 8 Bits
Pointer length........... 32 Bits
Work process number...... 16
Short dump setting....... "full"
Database server.......... "BOMW093A"
Database type............ "ORACLE"
Database name............ "BIW"
Database owner........... "SAPDAT"
Character set............ "English_United State"
SAP kernel............... "640"
Created on............... "Nov 4 2004 23:26:03"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "OCI_920_SHARE "
Patch level.............. "43"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.1.7.., ORACLE 9.2.0.."
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory usage.............
Roll..................... 8112
EM....................... 6271776
Heap..................... 0
Page..................... 24576
MM Used.................. 3921120
MM Free.................. 258392
SAP Release.............. "640"
User and Transaction
Client.............. 800
User................ "IC881147"
Language key........ "E"
Transaction......... " "
Program............. "SAPLSDCL"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "SAPLSDCL" in "INTERNAL_ERROR".
The main program was "RSRD_BROADCAST_PROCESSOR ".
The termination occurred in line 25 of the source code of the (Include)
program "LSDCLF00"
of the source code of program "LSDCLF00" (when calling the editor 250).
The program "SAPLSDCL" was started as a background job.
Job name........ "SECOQUERY"
Job initiator... "IC881147"
Job number...... 14265102
Source Code Extract
Line
SourceCde
1
2
INCLUDE LSDCLF00 *
3
4
5
6
FORM INTERNAL_ERROR *
7
8
Handles unexpected error conditions (internal errors)
9
10
--> VALUE(U_ROUTINE) Routine/function module where error occured
11
--> VALUE(U_ERROR_CODE) Identifier in routine (e.g. number)
12
--> VALUE(U_VAR1) Variable containing further information
13
--> VALUE(U_VAR2) Variable containing further information
14
--> VALUE(U_VAR3) Variable containing further information
15
--> VALUE(U_VAR4) Variable containing further information
16
17
form internal_error
18
using value(u_routine)
19
value(u_error_code)
20
value(u_var1)
21
value(u_var2)
22
value(u_var3)
23
value(u_var4).
24
>>>>>
message x000 with u_routine u_error_code u_var1 u_var2.
26
27
endform.
28
29
30
*& Form BAD_OBJECT_TO_SYMSG
31
32
maps error information in u_bad_object into system message
33
variables
34
35
--> VALUE(U_BAD_OBJECT) structure containing error information
36
37
form bad_object_to_symsg
38
using value(u_bad_object) type sdokerrmsg.
39
40
sy-msgid = u_bad_object-id.
41
sy-msgty = u_bad_object-type.
42
sy-msgno = u_bad_object-no.
43
sy-msgv1 = u_bad_object-v1.
44
sy-msgv2 = u_bad_object-v2.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
4
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
Report Dissemaintion Framework: Executing the Transferred Settings
SY-MSGTY
X
SY-MSGID
1R
SY-MSGNO
000
SY-MSGV1
SDOK_GET_PHIO_ACCESS
SY-MSGV2
001
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
15 FORM SAPLSDCL LSDCLF00 25
INTERNAL_ERROR
14 FORM SAPLSDCI LSDCIU13 303
PHIO_GET_CONTENT_ACCESS
13 FUNCTION SAPLSDCI LSDCIU13 113
SDOK_PHIO_GET_CONTENT_ACCESS
12 FUNCTION SAPLSKWF_CONTENT LSKWF_CONTENTU02 63
SKWF_PHIO_CONTENT_ACCESS_GET
11 METHOD CL_RSRA_KWF_UTILITIES=========CP CL_RSRA_KWF_UTILITIES=========CM00B 50
CL_RSRA_KWF_UTILITIES=>COPY_MIME_TO_FOLDER
10 METHOD CL_RSRA_KWF_TMPL==============CP CL_RSRA_KWF_TMPL==============CM002 28
CL_RSRA_KWF_TMPL=>GET_STYLESHEET
9 METHOD CL_RSRA_KWF_TMPL==============CP CL_RSRA_KWF_TMPL==============CM001 227
CL_RSRA_KWF_TMPL=>CONSTRUCTOR
8 METHOD CL_RSRA_ENGINE_BC=============CP CL_RSRA_ENGINE_BC=============CM010 9
CL_RSRA_ENGINE_BC=>SET_TEMPLATE_FOLDER
7 METHOD CL_RSRA_ENGINE_BC=============CP CL_RSRA_ENGINE_BC=============CM001 75
CL_RSRA_ENGINE_BC=>CONSTRUCTOR
6 METHOD CL_RSRA_JOB===================CP CL_RSRA_JOB===================CM003 47
CL_RSRA_JOB=>EXECUTE_SINGLE
5 METHOD CL_RSRA_JOB===================CP CL_RSRA_JOB===================CM00E 14
CL_RSRA_JOB=>EXECUTE_SINGLE_RC
4 METHOD CL_RSRD_PRODUCER_RA===========CP CL_RSRD_PRODUCER_RA===========CM001 147
CL_RSRD_PRODUCER_RA=>IF_RSRD_F_PRODUCER_RT~PRODUCE
3 METHOD CL_RSRD_SETTING===============CP CL_RSRD_SETTING===============CM005 28
CL_RSRD_SETTING=>EXECUTE_NODES
2 METHOD CL_RSRD_SETTING===============CP CL_RSRD_SETTING===============CM002 73
CL_RSRD_SETTING=>EXECUTE
1 EVENT RSRD_BROADCAST_PROCESSOR RSRD_BROADCAST_PROCESSOR 197
START-OF-SELECTION
Chosen variables
Name
Val.
No. 15 Ty. FORM
Name INTERNAL_ERROR
U_ROUTINE
SDOK_GET_PHIO_ACCESS
54445445554445444455
34FBF754F089FF133533
SY-MSGV1
SDOK_GET_PHIO_ACCESS
54445445554445444455222222222222222222222222222222
34FBF754F089FF133533000000000000000000000000000000
U_ERROR_CODE
001
333
001
SY-MSGV2
001
33322222222222222222222222222222222222222222222222
00100000000000000000000000000000000000000000000000
U_VAR1
2
0
SY-MSGV3
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SDOKI_MODE_DELETE
5
0000
5000
U_VAR2
2
0
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
No. 14 Ty. FORM
Name PHIO_GET_CONTENT_ACCESS
SYST
####################################################A#######P###############è#################
0000000000000000000000000000000000000000000000000000400000005000000000000000E00000000000000000
0000000010002000000000000000000000000000400000001000100010000000000000000000840000000000000000
PHIO_OBJECT_ID-CLASS
2222222222
0000000000
DUMMY_VERSTYPE
0
3
0
DUMMY_FCT_EXPORT
222222222222222222222222222222
000000000000000000000000000000
DUMMY_FCT_IMPORT
222222222222222222222222222222
000000000000000000000000000000
DUMMY_FCT_DELETE
222222222222222222222222222222
000000000000000000000000000000
FCT_VIEW
222222222222222222222222222222
000000000000000000000000000000
BUFF_XPIRE
000000000000
333333333333
000000000000
NO_BUFFER
2
0
SUBRC_AUX
3
0000
3000
SDOKA_EVENT_PH_FROM_REL_PRE
0022
3333
0022
SCREEN
%_17SNS0001592815_%_%_%_%_%_%_
2533545333333333352525252525252222222222222222222222222222222222222222222222222222222222222222
5F173E30001592815F5F5F5F5F5F5F0000000000000000000000000000000000000000000000000000000000000000
<%_TABLE_SDOKSTRE>
SY-XFORM
CONVERSION_EXIT
444545544454545222222222222222
3FE65239FEF5894000000000000000
CONTEXT[]
Table IT_5544[0x89]
FUNCTION=SKWF_PHIO_CONTENT_ACCESS_GETDATA=CONTEXT[]
Table reference: 324
TABH+ 0(20) = 00000000801CE03C0000000044010000A8150000
TABH+ 20(20) = 0000000059000000FFFFFFFF047B0200D00E0000
TABH+ 40( 8) = 10000000C1248000
store = 0x00000000
ext1 = 0x801CE03C
shmId = 0 (0x00000000)
id = 324 (0x44010000)
label = 5544 (0xA8150000)
fill = 0 (0x00000000)
leng = 89 (0x59000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000058
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0x381CE03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0x98DC033D
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
CONTEXT
22222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PROPERTIES[]
Table[initial]
PROPERTIES
22222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 13 Ty. FUNCTION
Name SDOK_PHIO_GET_CONTENT_ACCESS
ALLOW_MODEL
2
0
CACHE_SERVER
0000000000
2222222222222222222222222222222222222222222222222222222222222222333333333322222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
CLIENT
800
333
800
CONTENT_ONLY
X
5
8
CONTENT_OR_URL_ONLY
2
0
OBJECT_ID
222222222222222222222222222222222222222222
000000000000000000000000000000000000000000
RAW_MODE
2
0
TEXT_AS_STREAM
X
5
8
USE_URL_AT
2
0
ACCESS_MODE
00
33
00
DOCUMENT_HTTPS_URL
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
DOCUMENT_URL
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
MODEL_RETURNED
2
0
COMPONENTS[]
Table[initial]
COMPONENT_ACCESS[]
Table IT_5533[0x8616]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_COMPONENT_ACCESS
Table reference: 337
TABH+ 0(20) = 00000000481BE03C00000000510100009D150000
TABH+ 20(20) = 00000000A8210000FFFFFFFF04C5010088190000
TABH+ 40( 8) = 01000000C1248000
store = 0x00000000
ext1 = 0x481BE03C
shmId = 0 (0x00000000)
id = 337 (0x51010000)
label = 5533 (0x9D150000)
fill = 0 (0x00000000)
leng = 8616 (0xA8210000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000107
occu = 1 (0x01000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0x001BE03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0x985D043D
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
CONTEXT[]
Table IT_5544[0x89]
FILE_CONTENT_ASCII[]
Table IT_5534[0x1022]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_FILE_CONTENT_ASCII
Table reference: 312
TABH+ 0(20) = 00000000B01BE03C00000000380100009E150000
TABH+ 20(20) = 00000000FE030000FFFFFFFF04C50100D81A0000
TABH+ 40( 8) = 10000000C1248000
store = 0x00000000
ext1 = 0xB01BE03C
shmId = 0 (0x00000000)
id = 312 (0x38010000)
label = 5534 (0x9E150000)
fill = 0 (0x00000000)
leng = 1022 (0xFE030000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000113
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0x681BE03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0xB813043D
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
FILE_CONTENT_BINARY[]
Table IT_5535[0x1022]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_FILE_CONTENT_BINARY
Table reference: 325
TABH+ 0(20) = 00000000181CE03C00000000450100009F150000
TABH+ 20(20) = 00000000FE030000FFFFFFFF04C50100101B0000
TABH+ 40( 8) = 10000000C1248000
store = 0x00000000
ext1 = 0x181CE03C
shmId = 0 (0x00000000)
id = 325 (0x45010000)
label = 5535 (0x9F150000)
fill = 0 (0x00000000)
leng = 1022 (0xFE030000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000114
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0xD01BE03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0xC08FD33C
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
PROPERTIES[]
Table[initial]
COMPONENT_ACCESS
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
FILE_CONTENT_ASCII
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
FILE_CONTENT_BINARY
0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1.
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
OBJECT_ID_AUX
222222222222222222222222222222222222222222
000000000000000000000000000000000000000000
X_DOCUMENT_URL
X
5
8
X_DOCUMENT_HTTPS_URL
X
5
8
X_COMPONENT_ACCESS
X
5
8
SUBRC_AUX
0
0000
0000
%_DUMMY$$
2222
0000
%_SPACE
2
0
SY-REPID
SAPLSDCI
5454544422222222222222222222222222222222
310C343900000000000000000000000000000000
No. 12 Ty. FUNCTION
Name SKWF_PHIO_CONTENT_ACCESS_GET
CACHE_SERVER
0000000000
2222222222222222222222222222222222222222222222222222222222222222333333333322222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PHIO
2222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000
USE_URL_AT
2
0
X_ALLOW_MODEL
2
0
X_CONTENT_ONLY
X
5
8
X_CONTENT_OR_URL_ONLY
2
0
X_RAW_MODE
2
0
X_TEXT_AS_STREAM
X
5
8
ACCESS_MODE
00
33
00
DOCUMENT_HTTPS_URL
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
DOCUMENT_URL
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ERROR
000
2222222222222222222223332222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
X_MODEL_RETURNED
2
0
COMPONENT_ACCESS[]
Table IT_5533[0x8616]
CONTEXT[]
Table IT_5544[0x89]
FILE_CONTENT_ASCII[]
Table IT_5534[0x1022]
FILE_CONTENT_BINARY[]
Table IT_5535[0x1022]
PROPERTIES[]
Table[initial]
SKWFA_C_ACT_READ
03
33
03
SYST-REPID
SAPLSKWF_CONTENT
5454545454445445222222222222222222222222
310C3B76F3FE45E4000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PHIO+1(42)
222222222222222222222222222222222222222222
000000000000000000000000000000000000000000
CL_ABAP_TABLEDESCR=>TABLEKIND_STD
S
5
3
SKWFC_YES
X
5
8
No. 11 Ty. METHOD
Name CL_RSRA_KWF_UTILITIES=>COPY_MIME_TO_FOLDER
I_S_MIME_IO
FM_FOLDER 3AA00E1E0D0E3DCBE10000000A1144B5
4454444452234433434343434444333333334333343
6DF6FC4520031100515040534325100000001114425
I_S_FOLDER_IO
FBW_FLD 08BSWBLVV6N1IJCIG3VHEX2H8
4455444222233455445534344444354453432222222
627F6C40000082372C666E19A397368582880000000
L_T_PROPERTY_REQUEST
Table IT_5512[1x25]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_PROPERTY_REQUEST
Table reference: 316
TABH+ 0(20) = 28D5D23C68D5D23C000000003C01000088150000
TABH+ 20(20) = 0100000019000000FFFFFFFF04C5010038110000
TABH+ 40( 8) = 10000000C1248400
store = 0x28D5D23C
ext1 = 0x68D5D23C
shmId = 0 (0x00000000)
id = 316 (0x3C010000)
label = 5512 (0x88150000)
fill = 1 (0x01000000)
leng = 25 (0x19000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000069
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xC00BE03C
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
store_id = 3644 (0x3C0E0000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0x600DE03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0x98D5033D
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
L_S_PROPERTY_REQUEST
KW_RELATIVE_URL
4555444545455542222222222
B7F25C14965F52C0000000000
L_T_PHIO
Table IT_5494[1x43]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_PHIO
Table reference: 309
TABH+ 0(20) = E8D4D23CE0D3D23C000000003501000076150000
TABH+ 20(20) = 010000002B000000FFFFFFFF04C5010018120000
TABH+ 40( 8) = 10000000C1248000
store = 0xE8D4D23C
ext1 = 0xE0D3D23C
shmId = 0 (0x00000000)
id = 309 (0x35010000)
label = 5494 (0x76150000)
fill = 1 (0x01000000)
leng = 43 (0x2B000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000073
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x2010E03C
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
store_id = 3643 (0x3B0E0000)
shmIsReadOnly = 0 (0x00000000)Hi priya,
Not sure: check syntax in your Update Roules, also at level of start routine.
Ciao.
Riccardo. -
Chinese characters scrambled when loading from DS to BW
Hi, I've been pulling my hair out with this issue.
I have a flat file containing Chinese text. When I load this in BW using 'FLATFILE' as a source system, it works fine. BW shows the correct Chinese characters.
When I do the same load using BODI, I get funny characters.
When I use BODI to load from one flat file into another flat file, the Chinese characters remain correct.
What do I need to do to make sure I get the right Chinese characters in BW when loading from BODI?
BODI is installed on Unix on Oracle 10.
I run the jobs as batch processes.
The dsconfig.txt has got:
AL_Engine=<default>_<default>.<default>
There are no locale settings in al_env.sh
BW target is UTF-8 codepage.
File codepage is BIG5-HKSCS
BODI is set up as a Unicode system in SAP BW.
When loading flat file to flat file, I get a message:
DATAFLOW: The specified locale <eng_gb.iso-8859-1> has been coerced to <Unicode (UTF-16)
because the datastore <TWIN_FF_CUSTOMER_LOCAL> obtains data in <BIG5-HKSCS> codepage.
JOB: Initializing transcoder for datastore <TWIN_FF_CUSTOMER_LOCAL> to transcode between
engine codepage<Unicode (UTF-16)> and datastore codepage <BIG5-HKSCS>
When loading to BW the messages are almost the same, but now the last step in UTF-16 to UTF-8.
I read the wiki post which definitely helped me to understand the rationale behind code page, but now I ran out of ideas what else to check ( http://wiki.sdn.sap.com/wiki/display/BOBJ/Multiple+Codepages )
Any help would be greatly appreciated.
Jan.Hi all. Thanks for the Inputs. This is what I got when I clicked on the Details Tab of the Monitor....
Error when transferring data; communication error when analyzing
Diagnosis
Data packages or InfoPackages are missing in BI but there were no apparent processing errors in the source system. It is therefore probable that there was an error in the data transfer.
The analysis tried to read the ALE outbox of the source system. This lead to error .
It is possible that there is no connection to the source system.
Procedure
Check the TRFC overview in the source system.
Check the connection to the source system for errors and check the authorizations and profiles of the remote user in both the BI and source systems.
Check th ALE outbox of the source system for IDocs that have not been updated. -
Key Figure doubles in value when loaded to data target
I have added a key figure to a copy of the standard inventory cube 0IC_C03. When I load the key figure it has the correct value in PSA but doubles in value when loaded to the cube. The mapping is one to one, why is this and how can I resolve? Thanks
Hi,
You might have done compression for BX and BF LOADS with MArker update
or
you have not yet done compression at any request.
With rgds,
Anil Kumar Sharma .P -
My crash problem has been going on for week, now. I tried uninstalling FF and reinstalling it. I hoped that would fix the problem, but it didn't. Crashes occur randomly, when loading or reloading pages but they are NOT specific pages. The Report ID listed below is just 1 of several reports from the past week.
I am unwilling to attempt navigation away from these sites. The pop-ups that occur on the attempt to leave a site or to close the browser are exit traps offering incentive to stay.
Once upon a time, when the internet was less dangerous, I would be willing to close the exit pop-ups. Now, after twice being infected with malware trying to close the pop-ups, I now force close whichever browser I am using.
Recently, I clicked on the red X to close one pop-up, and it installed a trojan that I had to pay to be removed. When I clicked on 'Leave' in another exit pop, it didn't exit and it turned out I was giving permission to run a script file. Now that criminals have learned these exit pop-ups can be used to force a click action, the sites using them have become dangerous.
If I force the browser to close using Task manager, Please tell me how to stop FireFox from sending me directly back to the same site because it mistakenly believes it crashed when it did not. I forced it to close because I was on a site that had taken control of my browser and was not allowing me to leave the site.
No other browser sends me back to the potentially dangerous sites. I prefer Firefox, but the new version must have a setting that allows me to get safely away from a problem site? -
Photoshop crashes when loading a file or image
Using Photoshop cs3 on a PC with Windows 7 installed.
Major Problem: Photoshop gives no response when opening an image of any sort or psd file which ends out with the options to either close the program or close and find a solution online which gives no solution whatsoever.
PScs3 was working just fine when installed but after installing an NVIDIA plug-in did it start bearing some problems. When loading png files, a window normally appears telling me that Photoshop could not parse the file. After seeing this I went to uninstall the plug-in. The problem seemed to went away but shortly after was Photoshop crashing at random, and I do mean random. Starting Photoshop at first seems to nullify the chances of crashing but after either a short period of time or a long period of time will it crash when trying to open a file. Opening multiple files at once doesn't work either but when opening only one file into PScs3 will it cooperate until opening a second. I'm not sure if the plug-in is what caused the problem but I do know everything from there seems hectic. Every crash leads me opening PScs3 again with all of its settings reset from when I first exited normally.
Plugin Used:
Photoshop_Plugins_8.23.1101.1715
Appications Type; 4,317 KB
Company - InstallShield Softwere Corporation
Have you tried uninstalling and reinstalling the program?
Unfortunetly yes I have attempted this and the problem still occurs towards cs3. This makes me fear that the entire program is glitched.
Do you have any other plug-ins installed?
I've checked and there are no other plug-ins attatched.
This is my last option before seeing to reformat my computer. If there is any input about the topic, now is the time.Just a hunch: change your default printer to something else (a locally attached printer, not networked) or "PrintToPDF", then relaunch Photoshop and try again.
It could also be a plugin (try disabling ALL third party plugins).
And it could be a bad OS install, a virus, etc. It may take a while to find.
Maybe you are looking for
-
RKD_WORD_WRAP with string input
hi all, I need to split a string with RKD_WORD_WRAP, but it seems it takes only chars as input, so I would like to do this: create a char variable dynamically as long as the string in input and then pass it to the RKD_WORD_WRAP. Can anybody please te
-
Link with examples of using dbms_stats package
Please, Should Someone let me know when I could find a link or some example on using the new DBMS_STATS package to gather data statisitcs? Thanks
-
Sort Order Wrong on Curve 9360
In the Contacts application, I changed the sort to be ordered by Last Name. So now, instead of being ordered as: Adam Smith Alice Jones It lists them as: Smith, Adam Jones, Alice In other words, it is showing the last names first, which is what I wa
-
Can I download my music from my iPod to my ipad
I want to put the music from my iPod to my iPad, can I do it without going back to my library on my desktop
-
BB 9860 - Missing characters on keyboard in BB Browser
Hi, I've a little "problem" with some of my BlackBerries. There's a issue with the keyboard .. .just in the browser. Everywhere else it works fine. But in the browser there are missing a few characters of the extra symbols. It's not a huge problem ..