NDPS printer in OES Linux
I setup a lab with OES on SLES9 and setup a iPrint printer and it works
fine but how do I get it to show up when I try to add it from a
workstation with the Novell client and I select Add Printers >NDPS
Printers > NDPS Controlled Printers > Browse the tree but no printers
show up.
I can get add it through the maptool but I hoping to use NDPS first and
then migrate the users to iprint later.
Any help would be great.
Randy
Randymacfarland,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/
Similar Messages
-
Hello all,
I am currently using Netware 6.5 SP5(OES Netware SP2), and wandering what
print solutions are available for the OES Linux platform. Specifically, is
NPDS available on OES Linux? If so is it the primary solution or is there
a different solution?
A direction to documentation would be more helpful. Any assistance is
appreciated.
Regards,
Matt RigorMatt,
NDPS isn't really state of the art on NW6.5.
iPrint is, as well on Netware as on OES Linux. Check the manuals.
Uwe
Novell Support Connection Volunteer SysOp
Please don't send me support related e-mail unless I ask you to do so. -
How do I use a cups printer on a linux machine from mountain lion
I have always used a linux cups printer on my network from my iMac. You could even browse the printer when looking for it. Worked fine.
Now in the updated Mountain Lion (10.8.2) is cannot see the remote printer anymore.
If I create the printer using cups through the web interface on my iMac, which is conected to the linux server, I can create teh printer, and print a test page on this printer on the linux server! Great.
But I cannot pick the printer from a list from any application on my Mac. It is as if it does not exist (but I can print a testpage though ...).
This a a real bad change in Mountain Lion. I consider to go back to Lion (10.7).
Isn't there any way to get this working or do I realy need to downgrade to 10.7
Thanks for any hints!Hi VikingOSX and Grant Bennet-Alder.
Thanks for the replies, but unfortunately, they do not work.
The solutions you suggest are all OK for 10.7.x (and I have used them before), but these steps do nothing in 10.8.2. No difference at all.
I have also tried various other suggestions I found on the web and in this forum, such as:
cupsctl BrowseRemoteProtocols=cups
cupsctl BrowseProtocols='"cups dnssd"'
They all seems to work (and I needed them before in 10.7.x), but they don't seem to help any more in 10.8.2
To illustrate the problem, I have tested the following 4 cases (in this particular order) on iMac 10.8.2 through CUPS web browser leding to teh following (copied text from CUPS web interface):
Step 1:
Description: EPSONserver
Location: server
Driver: Local Raw Printer (grayscale)
Connection: http://192.168.1.94:631/printers/R285
Defaults: job-sheets=none, none media=unknown
Jobs
▼ ID ▼ Name User Size Pages State Control
EPSONserver-23 Unknown Withheld 1k 1 processing since Sat Oct 6 14:59:57 2012 "Printing page 1, 85%"
Result step 1:
Test page: via CUPS web browser, OK. works just fine, full color and everything looks just fine
Printer in printer list: No, installed printer not available in OSX.
Can print from application: No, printer not in printer list. Cannot select printer.
Step 2:
Description: EPSONserver
Location: server
Driver: EPSON SP R285 Series (color, 2-sided printing)
Connection: http://192.168.1.94:631/printers/R285
Defaults: job-sheets=none, none media=na_letter_8.5x11in sides=one-sided
Jobs
▼ ID ▼ Name User Size Pages State Control
EPSONserver-24 Unknown Withheld 1k Unknown stopped "Filter failed"
Result step 2:
Test page: via CUPS web browser: NO. "Filter failed"
Printer in printer list: YES
Can print from application: NO, "Filter failed".
Step 3:
Description: EPSONserver
Location: server
Driver: Generic PostScript Printer (color, 2-sided printing)
Connection: http://192.168.1.94:631/printers/R285
Defaults: job-sheets=none, none media=na_letter_8.5x11in sides=one-sided Jobs
Result step 3:
Test page: via CUPS web browser: low resolution/bad quality, black and white test page
Printer in printer list: YES, it remained in printer list when changed from step 2 to step 3.
Can print from application: Yes, but bad quality, not useful at all.
Step 4 = change settings back to step 1 :
Description: EPSONserver
Location: server
Driver: Local Raw Printer (grayscale)
Connection: http://192.168.1.94:631/printers/R285
Defaults: job-sheets=none, none media=unknown
Result step 4:
Test page: via CUPS web browser: OK. works just fine, full color and everything looks just fine
Printer in printer list: it disappeared from the printer list at the moment the changes back from step 3 to step 1 were activated.
Can print from application: No, printer not in printer list. Cannot select printer.
Overall conclusion:
The printer appears in the printer list only when it is a postscript printer or using manufacturer drivers (i.e epson drivers). It does NOT appear when using a RAW printer (but works fine printing test pages through the CUPS web interface).
10.8.2. seems to have a serious bug.
Any help? Or is downgrading to 10.7 my only solution?
THX for reading! -
Print command from linux PC on to Windows Environment
Hi Experts,
We have SAP on Windows and the network printer is also on Windows, the PC with Linux is integrated with network printer i.e when the print command from Linux is given the output is available from the printer (Windows). But when the print command is given through SAP there is no output from Printer (Windows).
When same user logs into Windows the printer command is successful.hi hari,
Printing SAP documents using Linux client is a little bit tricky if you want to get good printing result just as when you print from your Windows client.
If you want to use G printing method (on Linux client), you can't use SAPWIN on device type since SAPWIN is relying printing method. You must use exact printer driver. For example when you're using Dot Matrix printer Epson LX300+, you can use EPESCP2
I am using different method to cheat this and it's completely work.
ardhian
http://ardhian.kioslinux.com
http://sapbasis.wordpress.com -
Ls,
When running my application on SuSe Linux i can print my report directly on my default printer and a barcode is printed.
When i run my application on Debian Linux direct print doesn't work, so i export to PDF and print that file using a linux lp command. the report is printed, but my barcode doesn't print.
I use Java JRE 6.0.21
Does anyone kwno how i can print directly using Debian or how i can print an exported PDF with barcode
thanks
AdIf I Open the PDF i in windows i can see the barcode.
I already did do some research and in every forum I find the same when you export to PDF and print it on Linux, no barcode is printed.
But I don't want to export to PDF, I want to print my report directly. This works using SuSe but not using Debian.
When I have a solution for that, It not only saves me time printing te report but also unnesecary converston and disk i/o
Ad -
hi there,
i installed zfs7 on oes linux and i cant connect to the mms database (
consoleone / management site status ) .
Any help would be nice.
Regards
Wolfgang HacklHi Ron ,
i installed the pds an mms service on oes .. the documentation says nothing
about site services only run on netware or windows ....
Wolfgang
>>> Ron van Herk<[email protected]> schrieb am 16.04.2006 um 23:10 in
Nachricht <bpy0g.730$[email protected]>:
> What component did you install???
> The site server isn't supported on OES Linux.
>
> Ron
>
> "W Hackl" <[email protected]> wrote in message
> news:[email protected]..
>> hi there,
>>
>> i installed zfs7 on oes linux and i cant connect to the mms database (
>> consoleone / management site status ) .
>> Any help would be nice.
>>
>> Regards
>>
>> Wolfgang Hackl -
NDPS printer push via zfd3.2 not successful
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi all,
~ I need expert advise here.
Steps:
1. Install NW6.0 + with or without SP + ZFD3.2 SP3
2. Use NWAdmin32:
~ - create NDPS broker and manager - loaded them via console
~ - created NDPS queue to a printer agent (via object creation)
~ - added builin drivers into the queue, for W2K.
2. Use C1 to create a User Policy Package
~ - associate to a user in the same container
~ - configured and activated Event upon login to install the NDPS
printer + toggle default
3. Login as a the specified user from a W2K.
Results:
1. Observed that drivers were added in Event Viewer/Log of W2K.
2. Printer icon seen in printer folder/control panel of W2K.
3. R-click properties --> error message says drivers not installed,
prompting me to install drivers.
The NDPS pushed down is not able to be used for printing!
Additional info:
1. NDS and Bindery queue pushed down suffered from "driver is not
digitally signed", preventing me from logging in after authenticating
with NDS!
2. ZFD 2 is OK for NDS and Bindery queues, though the absence of
NDPS(expected)
Is there anything amiss with the deployment?
Thanks and regards,
James Tan
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5rc1 (Darwin)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFBSl4h76FgYr+7DNYRAgXKAJwKL0xeXKcjAdBicmohNG 7Oypf7IgCfQN5E
fPpuQ1jQaHRNsyDJotP+vWA=
=ktRX
-----END PGP SIGNATURE-----James,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses: http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Airport Print Serving and Linux
I have a small ethernet wired network with three macs and one PC running Ubuntu linux. The printer for the network is hanging off an Airport-Express in my network closet. All the macs print fine but I need to be able to print from the linux box as well. As such, I need to know what protocol that apple uses to support the print server function. Or, I need some advice on setting it up with an SMB protocol. Any information would be greatly appreciated.
MattHi,
Sorry for delaying in reply.
Linux clients see page count. I've paused printing and checked some documents. Property page from a linux client document shows as this:
Documents sent from windows clients show same but they've document name and page count.
SPL archive copied from spooler printer on Windows server shows that info is present too:
%!PS-Adobe-3.0
%%Creator: cairo 1.9.5 (http://cairographics.org)
%%CreationDate: Thu Jun 19 14:15:48 2014
%%DocumentData: Clean7Bit
%%LanguageLevel: 2
%%DocumentMedia: Letter 612 792 0 () ()
%%Orientation: Portrait
%%For: (testuser)
%%Title: (Phaser 5500 Descarga del archivo)
%RBINumCopies: 1
%%Pages: (atend)
%%BoundingBox: (atend)
%%EndComments
%%BeginProlog
%%BeginFeature: *JobPatchFile 1
% Default Definitions
userdict /xerox$pagedevice <<
/MediaClass null
/MediaPosition null
/PageSize [612 792]
/TraySwitch true
/ManualFeed false
/ImagingBBox null
/ProcessColorModel /DeviceGray
/DeviceRenderingInfo currentpagedevice 1 index get 1 dict copy
/PostRenderingEnhance false
/Install {
xerox$old_install xerox$flip {
currentpagedevice /PageSize get aload pop translate 180 rotate
} if
>> put
<--- snip snip REMOVED FOR SIMPLICITY snip snip ------>
showpage
%%Trailer
%%Pages: 1
%%BoundingBox: 0 0 612 792
%%EOF
Linux client used official PPD file downloaded from xerox webpage for linux
cups. Windows server uses Xerox Global Print Driver PS 5347.600.0.0 type 3 with
Render print jobs on client computers as suggested by Alan before.
Any other idea? -
Oce, Print server/Qserver and NDPS Printer agents
We have an Oce TDS600 (the controller for an Oce 9600 plotter and a large format scanner). We tried a long time ago to set it up as a NDPS printer but it never worked right. We then went to the tried and true queue based printing (printer, print server and queue) and things were cooking along well until we upgraded the server hosting all of this from NW 5.1 to NW 6.5. Two of the three printers being serviced through "qserver mode" would not print. The main printer we use, the Oce was one of these (the other was an HP 2800CP large format color inkjet plotter). the printer that kept working was a Xerox DocuColor 3535.
The only clues we had were that the print server was listed as being down. We tied recreating the printers, print servers and queues, no joy. After a day of panic, the only thing that got it working was to set up NDPS printer agents and have them service the queues through LPR. This broke the log jamb and allowed us to get the back log of print jobs in the queues.
So, what did I mess up? What about NW 6.5 doesn't like legacy printing? We still cant print directly through the NDPS Printer agents, but we can print through the queues. There are LPR communication problems between the PA and the TDS600 controller. I couldn't find anything on the naming for the LPR printer for this model of Oce Printer (the external controller is not an EFI fiery) so I left it at the default of "PASSTHROUGH".
Any clues?Daniel,
> So, what did I mess up? What about NW 6.5 doesn't like legacy printing? We still cant print directly
through the NDPS Printer agents, but we can print through the queues. There are LPR communication
problems between the PA and the TDS600 controller. I couldn't find anything on the naming for the LPR
printer for this model of Oce Printer (the external controller is not an EFI fiery) so I left it at the
default of "PASSTHROUGH".
>
Well, PASSTHROUGH is virtually always wrong. The following TID gives the correct name to use for a
number of printers:
http://support.novell.com/cgi-bin/se...?/10080373.htm
If your printer is not listed, then check the printer documentation. While many printers do not include
instructions on how to use the printer from Novell's NDPS or iPrint, they generally include instructions
on how to access the printer from Unix machines or from Windows machines using LPR. In those
instructions or sample configuration files, you generally find the correct name to use in the LPR
configuration.
Marcel Cox
Novell Support Connection SysOp
http://support.novell.com/forums/ -
OES Linux DHCP Management Quesiton
Previously, under Netware, I could use the DNS/DHCP console to match ip to machine hostname; however, I'm noticing that I do not have this ability under OES Linux's DHCP management utility. I looked in the leases file on the linux server but to my dismay it only displays the mac address.
What are my options?Originally Posted by gwcisco
Previously, under Netware, I could use the DNS/DHCP console to match ip to machine hostname; however, I'm noticing that I do not have this ability under OES Linux's DHCP management utility. I looked in the leases file on the linux server but to my dismay it only displays the mac address.
What are my options?
Your only option (as far as I am aware--and if I understand you correctly) is to go with OES 2 SP 3, follow TID 7006450, and that is about it. The information is coming from the leases file itself. Unfortunately, you can't get 100% of what you were used to on NetWare on OES. Many things have been ported over, but some things have not. -
I canon mg 2520 printer to a linux machine
I want to connect a canon mg 2520 printer to a linux machine using wireless
Hi PuddleJumper,
The PIXMA MG2520 only has a USB interface, and use of the printer with a Linux operating system is not supported; the printer was designed to be used with computers running Windows or Mac operating systems.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Trying to get PXE to respond to a client on OES Linux SP2.
Novell-pxydhcp, novell-tftp, and novell-zmgprebootpolicy are all
running. UDP ports 67, 69, 111, 4011, and 18753 are listed in
FW_SERVICES_EXT_UDP (and INT_UDP). Firewall has been restarted.
Workstation does not get PXE connection. Previously, this machine did
get a connection to a Netware server running PXE.
Any thoughts on what we're missing?
Thanks.
LyleOn Tue, 12 Jun 2007 18:07:06 GMT, [email protected] wrote:
> DHCP is on a Netware server on same network segment.
did you configure option 60 on this dhcp server? if yes remove it
Marcus Breiden
If you are asked to email me information please change -- to - in my e-mail
address.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net -
Moving a NetWare iPrint installation to an OES/Linux cluster
Hi folks,
I have an iPrint installation on my NetWare 6.5 cluster that i want to
move to my OES/Linux cluster. The two clusters are completely
independent at present, and need to remain that way. Is there any way i
can move printers and drivers without recreating them and manually
duplicating the settings?
Thanks,
Paul
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFE0AExafGwptjWFZkRAnT9AKCjmXKk7dwuIXA3QlYPRM mywN0u1ACeOrZX
NdOTqsZ/wbpjUD8iq744i1I=
=szY+
-----END PGP SIGNATURE-----Niclas Ekstedt wrote:
> On Wed, 02 Aug 2006 01:34:43 +0000, Paul Gear wrote:
>
> The Consolidation Utiltity available from the Download site
> is capable of moving PA's between Managers.
Thanks, Niclas - i'll check it out.
Paul
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFE0T/rafGwptjWFZkRApzVAKCpmDhCGzGM5s3MKnaIyYo+47kmqwCfd xfz
8lnocVoQ+peLvI60muL19a0=
=+/p6
-----END PGP SIGNATURE----- -
We are running a NetWare 5.1, 6.0, 6.5, OES 6.5 and now OES Linux shop. I
have just built and installed the OES Linux server into a new tree until I
can figure it out. Our workstations are all Windows 2000 and XP SP2 with
Novell Client 32 4.91.
Being that I'm new to Linux, how do our users connect to the server? If you
could point me to a tid, that would be great!
Thanks.Newbie wrote:
> Ok, I must be missing something. The only window that pops up is the
> Microsoft login window with ID and PWD options... Should the Novell 4.91
> client pop up instead?
>
>
> "Jeremy" <Jmeldrum@nospam_novell.com> wrote in message
> news:KEacf.2740$u%[email protected]...
>> Newbie wrote:
>>
>>> Thanks, linuxjoe.
>>>
>>> I have figured out how to setup the "Samba" and when I use Windows
>>> Explorer
>>> and browse to the "Microsoft Network" I can see the server and shares.
>>> I click on the share and I can't login.
>>>
>>> I went into iManger and configured a Workstation and User (admin) for
>>> accessing Linux.
>>> The server info:
>>> Tree: Linux_Tree
>>> Server: OES_Linux
>>> Context: test (both admin and server are in here)
>>>
>>> What do I put in the Login Box that pops up on my Windows XP machine?
>>>
>>>
>>>
>>>
>>> "linuxjoe" <[email protected]> wrote in message
>>> news:Xi6cf.2329$u%[email protected]...
>>>> Newbie wrote:
>>>>
>>>>> Being that I'm new to Linux, how do our users connect to the server?
>>>>> If
>>>>> you could point me to a tid, that would be great!
>>>>
>>>> You should be able to connect to it with a client over ncp as well. But
>>>> you
>>>> can also do it over ftp, http, nfs, etc.
>>>>
>> When the login box pops up, you use the same information you normally do,
>> tree, context, and server. The difference would be that you can now put
>> the oes linux server name (or IP address) in the the sever field. You
>> can also map to the SYS volume just as you would a NetWare server.
I am confused with your comments. If you have a user running Windows XP
with the 4.91 windows client, he will have a login popup. The Login window
will ask for the username and password. If you hit the advanced button, it
will show you the tree, context, and server fields. Currently you will
have your tree, context and server from your previous login populated. If
you want to log into the OES Linux server, you can change the server field
to point to the OES Linux server's IP or server name. There is nothing
different when accessing the NSS volumes on a OES Linux from a windows
workstation. -
HP LaserJet P1102W - no print output in Linux Mint 17.1 Cinnamon Desktop
I've just done a default install of Linux Mint 17.1 - as feared, no print output.
I'm guessing I need to install a driver - but I couldn't find anything easily on HP site, only Windows/Mac OS stuff. Are HP printers generally linux friendly? Where can I download drivers if they are? More over, I'm a total linux newbie, so any drivers need to be easily installed! I'm not currently familiar with Terminal windows and line commands!
My printer does have wireless enabled, but I have it connected via direct USB also.
Linux Mint did offer to run a diagnostic tool/debugging tool which gave a great deal of what means nothing to me. Debug output is below if it is helpful, but hoping a simple driver install will cure all ...
Debug Output:
Page 1 (Scheduler not running?):
{'cups_connection_failure': False}
Page 2 (Is local server publishing?):
{'local_server_exporting_printers': False}
Page 3 (Choose printer):
{'cups_dest': <cups.Dest HP-LaserJet-Professional-P-1102w (default)>,
'cups_instance': None,
'cups_queue': u'HP-LaserJet-Professional-P-1102w',
'cups_queue_listed': True}
Page 4 (Check printer sanity):
{'cups_device_uri_scheme': u'hp',
'cups_printer_dict': {'device-uri': u'hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W4037X5PR1a',
'printer-info': u'Hewlett-Packard HP LaserJet Professional P 1102w',
'printer-is-shared': True,
'printer-location': u'Leela',
'printer-make-and-model': u'HP LaserJet Professional P 1102w, hpcups 3.14.3, requires proprietary plugin',
'printer-state': 3,
'printer-state-message': u'',
'printer-state-reasons': [u'none'],
'printer-type': 167948,
'printer-uri-supported': u'ipp://localhost:631/printers/HP-LaserJet-Professional-P-1102w'},
'cups_printer_remote': False,
'hplip_output': (['',
'\x1b[01mHP Linux Imaging and Printing System (ver. 3.14.3)\x1b[0m',
'\x1b[01mDevice Information Utility ver. 5.2\x1b[0m',
'Copyright (c) 2001-13 Hewlett-Packard Development Company, LP',
'This software comes with ABSOLUTELY NO WARRANTY.',
'This is free software, and you are welcome to distribute it',
'under certain conditions. See COPYING file for more details.',
'\x1b[01mHP Linux Imaging and Printing System (ver. 3.14.3)\x1b[0m',
'\x1b[01mSystem Tray Status Service ver. 2.0\x1b[0m',
'Copyright (c) 2001-13 Hewlett-Packard Development Company, LP',
'This software comes with ABSOLUTELY NO WARRANTY.',
'This is free software, and you are welcome to distribute it',
'under certain conditions. See COPYING file for more details.',
'\x1b[01mhp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W4037X5PR1a\x1b[0m',
'\x1b[01mDevice Parameters (dynamic data):\x1b[0m',
'\x1b[01m Parameter Value(s) \x1b[0m',
' agent1-ack False ',
' agent1-desc Black toner cartridge ',
' agent1-dvc 0 ',
' agent1-health 0 ',
' agent1-health-desc Good/OK ',
' agent1-hp-ink False ',
' agent1-id 0 ',
' agent1-kind 4 ',
' agent1-known False ',
' agent1-level 100 ',
' agent1-level-trigger 0 ',
' agent1-sku 85A ',
' agent1-type 1 ',
' agent1-virgin False ',
' back-end hp ',
" cups-printers ['HP-LaserJet-Professional-P-1102w'] ",
' cups-uri hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W',
' 4037X5PR1a ',
' dev-file ',
' device-state 1 ',
' device-uri hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W',
' 4037X5PR1a ',
' deviceid MFG:Hewlett-Packard;MDL: LaserJet Professional P ',
' 1102w;CMD:ZJSJS,URF,PCLm,PJL,ACL,HTTCLSLSRINTER;DEHPHP ',
' LaserJet Presessional P 110;F;FWVER:20110826; ',
' duplexer 0 ',
' error-state 0 ',
' host ',
' in-tray1 1 ',
' in-tray2 1 ',
' is-hp True ',
' media-path 1 ',
' panel 0 ',
' panel-line1 ',
' panel-line2 ',
' photo-tray 0 ',
' port 1 ',
' r 0 ',
' revision 254 ',
' rg 000 ',
' rr 000000 ',
' rs 000000000 ',
' serial 000000000W4037X5PR1a ',
' status-code 1000 ',
' status-desc Idle ',
' supply-door 1 ',
' top-door 1 ',
'\x1b[01m',
'Model Parameters (static data):\x1b[0m',
'\x1b[01m Parameter Value(s) \x1b[0m',
' align-type 0 ',
' clean-type 0 ',
' color-cal-type 0 ',
' copy-type 0 ',
' embedded-server-type 0 ',
' fax-type 0 ',
' fw-download False ',
' icon HP_LaserJet_1012.png ',
' io-mfp-mode 6 ',
' io-mode 1 ',
' io-support 10 ',
' job-storage 0 ',
' linefeed-cal-type 0 ',
' model HP_LaserJet_Professional_P_1102w ',
' model-ui HP LaserJet Professional P 1102w ',
' model1 HP LaserJet Professional P 1102w Printer ',
' monitor-type 0 ',
' panel-check-type 0 ',
' pcard-type 0 ',
' plugin 1 ',
' plugin-reason 1 ',
' power-settings 0 ',
' pq-diag-type 0 ',
' r-type 0 ',
' r0-agent1-kind 4 ',
' r0-agent1-sku 85A ',
' r0-agent1-type 1 ',
' scan-src 0 ',
' scan-type 0 ',
' status-battery-check 0 ',
' status-dynamic-counters 0 ',
' status-type 8 ',
' support-released True ',
' support-subtype 2202411 ',
' support-type 2 ',
' support-ver 3.12.6 ',
" tech-class ['LJZjsMono'] ",
" tech-subclass ['NoAutoDuplex'] ",
' tech-type 3 ',
' usb-pid 4138 ',
' usb-vid 1008 ',
' wifi-config 3 ',
'Done.',
['\x1b[35;01mwarning: No display found.\x1b[0m',
'\x1b[31;01merror: hp-info -u/--gui requires Qt4 GUI support. Entering interactive mode.\x1b[0m',
'\x1b[35;01mwarning: No display found.\x1b[0m',
'\x1b[31;01merror: hp-systray requires Qt4 GUI and DBus support. Exiting.\x1b[0m',
'\x1b[35;01mwarning: Unable to connect to dbus. Is hp-systray running?\x1b[0m',
0),
'is_cups_class': False,
'local_cups_queue_attributes': {'charset-configured': u'utf-8',
'charset-supported': [u'us-ascii', u'utf-8'],
'color-supported': True,
'compression-supported': [u'none', u'gzip'],
'copies-default': 1,
'copies-supported': (1, 9999),
'cups-version': u'1.7.2',
'device-uri': u'hp:/usb/HP_LaserJet_Professional_P_1102w?serial=000000000W4037X5PR1a',
'document-format-default': u'application/octet-stream',
'document-format-supported': [u'application/octet-stream',
u'application/pdf',
u'application/postscript',
u'application/vnd.adobe-reader-postscript',
u'application/vnd.cups-pdf',
u'application/vnd.cups-pdf-banner',
u'application/vnd.cups-postscript',
u'application/vnd.cups-raster',
u'application/vnd.cups-raw',
u'application/x-cshell',
u'application/x-csource',
u'application/x-perl',
u'application/x-shell',
u'image/gif',
u'image/jpeg',
u'image/png',
u'image/tiff',
u'image/urf',
u'image/x-bitmap',
u'image/x-photocd',
u'image/x-portable-anymap',
u'image/x-portable-bitmap',
u'image/x-portable-graymap',
u'image/x-portable-pixmap',
u'image/x-sgi-rgb',
u'image/x-sun-raster',
u'image/x-xbitmap',
u'image/x-xpixmap',
u'image/x-xwindowdump',
u'text/css',
u'text/html',
u'text/plain'],
'finishings-default': 3,
'finishings-supported': [3],
'generated-natural-language-supported': [u'en-us'],
'ipp-versions-supported': [u'1.0',
u'1.1',
u'2.0',
u'2.1'],
'ippget-event-life': 15,
'job-creation-attributes-supported': [u'copies',
u'finishings',
u'ipp-attribute-fidelity',
u'job-hold-until',
u'job-name',
u'job-priority',
u'job-sheets',
u'media',
u'media-col',
u'multiple-document-handling',
u'number-up',
u'output-bin',
u'orientation-requested',
u'page-ranges',
u'print-color-mode',
u'print-quality',
u'printer-resolution',
u'sides'],
'job-hold-until-default': u'no-hold',
'job-hold-until-supported': [u'no-hold',
u'indefinite',
u'day-time',
u'evening',
u'night',
u'second-shift',
u'third-shift',
u'weekend'],
'job-ids-supported': True,
'job-k-limit': 0,
'job-k-octets-supported': (0, 476568600),
'job-page-limit': 0,
'job-priority-default': 50,
'job-priority-supported': [100],
'job-quota-period': 0,
'job-settable-attributes-supported': [u'copies',
u'finishings',
u'job-hold-until',
u'job-name',
u'job-priority',
u'media',
u'media-col',
u'multiple-document-handling',
u'number-up',
u'output-bin',
u'orientation-requested',
u'page-ranges',
u'print-color-mode',
u'print-quality',
u'printer-resolution',
u'sides'],
'job-sheets-default': (u'none', u'none'),
'job-sheets-supported': [u'none',
u'classified',
u'confidential',
u'form',
u'secret',
u'standard',
u'topsecret',
u'unclassified'],
'jpeg-k-octets-supported': (0, 476568600),
'jpeg-x-dimension-supported': (0, 65535),
'jpeg-y-dimension-supported': (1, 65535),
'marker-change-time': 0,
'media-bottom-margin-supported': [423, 547],
'media-col-default': u'(unknown IPP value tag 0x34)',
'media-col-supported': [u'media-bottom-margin',
u'media-left-margin',
u'media-right-margin',
u'media-size',
u'media-source',
u'media-top-margin',
u'media-type'],
'media-default': u'iso_a4_210x297mm',
'media-left-margin-supported': [423, 635],
'media-right-margin-supported': [423, 635],
'media-size-supported': [u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)',
u'(unknown IPP value tag 0x34)'],
'media-source-supported': [u'auto',
u'manual'],
'media-supported': [u'iso_a6_105x148mm',
u'iso_a5_148x210mm',
u'jpn_hagaki_100x148mm',
u'om_double-postcard_148.17x200.03mm',
u'om_jb5_182.12x257.05mm',
u'na_executive_7.25x10.5in',
u'om_16k195x270_195.09x269.88mm',
u'om_16k184x260_184.15x260mm',
u'oe_16k197x273_7.75x10.75in',
u'na_letter_8.5x11in',
u'iso_a4_210x297mm',
u'oe_flsa_8.5x13in',
u'na_legal_8.5x14in',
u'na_monarch_3.875x7.5in',
u'iso_dl_110x220mm',
u'na_number-10_4.125x9.5in',
u'iso_c5_162x229mm',
u'om_env-b5_176.04x250.12mm',
u'custom_min_3x5in',
u'custom_max_17x36in'],
'media-top-margin-supported': [423, 547],
'media-type-supported': [u'stationery'],
'multiple-document-handling-supported': [u'separate-documents-uncollated-copies',
u'separate-documents-collated-copies'],
'multiple-document-jobs-supported': True,
'multiple-operation-time-out': 300,
'natural-language-configured': u'en-us',
'notify-attributes-supported': [u'printer-state-change-time',
u'notify-lease-expiration-time',
u'notify-subscriber-user-name'],
'notify-events-default': [u'job-completed'],
'notify-events-supported': [u'job-completed',
u'job-config-changed',
u'job-created',
u'job-progress',
u'job-state-changed',
u'job-stopped',
u'printer-added',
u'printer-changed',
u'printer-config-changed',
u'printer-deleted',
u'printer-finishings-changed',
u'printer-media-changed',
u'printer-modified',
u'printer-restarted',
u'printer-shutdown',
u'printer-state-changed',
u'printer-stopped',
u'server-audit',
u'server-restarted',
u'server-started',
u'server-stopped'],
'notify-lease-duration-default': 86400,
'notify-lease-duration-supported': (0,
2147483647),
'notify-max-events-supported': [100],
'notify-pull-method-supported': [u'ippget'],
'notify-schemes-supported': [u'dbus',
u'mailto',
u'rss'],
'number-up-default': 1,
'number-up-supported': [1, 2, 4, 6, 9, 16],
'operations-supported': [2,
4,
5,
6,
8,
9,
10,
11,
12,
13,
14,
16,
17,
18,
19,
20,
21,
22,
23,
24,
25,
26,
27,
28,
34,
35,
37,
38,
56,
57,
59,
16385,
16386,
16387,
16388,
16389,
16390,
16391,
16392,
16393,
16394,
16395,
16396,
16397,
16398,
16399,
16423,
14],
'orientation-requested-default': None,
'orientation-requested-supported': [3,
4,
5,
6],
'output-bin-default': u'face-down',
'output-bin-supported': [u'face-down'],
'page-ranges-supported': True,
'pages-per-minute': 1,
'pages-per-minute-color': 1,
'pdf-k-octets-supported': (0, 476568600),
'pdf-versions-supported': [u'adobe-1.2',
u'adobe-1.3',
u'adobe-1.4',
u'adobe-1.5',
u'adobe-1.6',
u'adobe-1.7',
u'iso-19005-1_2005',
u'iso-32000-1_2008',
u'pwg-5102.3'],
'pdl-override-supported': [u'attempted'],
'port-monitor': u'none',
'port-monitor-supported': [u'none'],
'ppd-timestamp': u'*',
'print-color-mode-default': u'color',
'print-color-mode-supported': [u'monochrome',
u'color'],
'print-quality-default': 4,
'print-quality-supported': [3, 4],
'printer-commands': u'none',
'printer-current-time': u'(IPP_TAG_DATE)',
'printer-dns-sd-name': u'Hewlett-Packard HP LaserJet Professional P 1102w @ Leela',
'printer-error-policy': u'retry-job',
Hi @durandal,
I read your post and see that you need the drivers for the P1102w printer. I can provide the website for you.
Here is the link for the HP Linux Imaging and Printing website. HP Linux imaging and printing.
Here is the link for the P1102w drivers. HP LaserJet Professional p1102w Printer.
If you need more information, please post your questions at the Linux Distribution Forums.
If you appreciate my efforts, please click the Thumbs up button below.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP
Maybe you are looking for
-
Please Help! Im at my witts end!!
Im praying someone here can give me some advice, if i could find someone from BT to go and see i would. I have never recieved such terrible service from any company. Ok, my problem.. Ill give you the full story. Was a very happy customer with ZEN in
-
How can i change my adium default log in email?
I basically would like to log in with a different email address from the one entered during set up. Please advise. Thank You.
-
How Do i add an inverted left channel to the right channel?
How Do i add an inverted left channel to the right channel?
-
Hi, I need to add custom fields in tran vt01, vt02, vt03 and these custom fields added in sap table vttp. thanks
-
I need some code or a clear tutorial that explains how to write files using an applet. i want to create a game that you can save on so i want to save it to the server. can anyone help? thnx