NDPS Printer not bound on Novell 6.5 SP8

I am running NETWARE 6.5 SP8 with server on IP 192.168.0.100
Host on ETC is updated with the right IP info.
I have a print server from Trendnet that use to work fine under Novell 5.0 at 192.168.0.4
So I tried to use the same setup on NDPSM version 3.03b: Novel Printer Gateway
Novell Port manager, Remote Printer LPR/TCPIP, Address: 192.168.0.4 Port: Passthrough.
I pinged from the server to 192.168.0.4 and see the print server.
Why is my printer agent for this remote printer staying on "Not Bound" status?

You might try the iPrint forum for this one iPrint

Similar Messages

NDPS printer push via zfd3.2 not successful

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi all,
~ I need expert advise here.
Steps:
1. Install NW6.0 + with or without SP + ZFD3.2 SP3
2. Use NWAdmin32:
~ - create NDPS broker and manager - loaded them via console
~ - created NDPS queue to a printer agent (via object creation)
~ - added builin drivers into the queue, for W2K.
2. Use C1 to create a User Policy Package
~ - associate to a user in the same container
~ - configured and activated Event upon login to install the NDPS
printer + toggle default
3. Login as a the specified user from a W2K.
Results:
1. Observed that drivers were added in Event Viewer/Log of W2K.
2. Printer icon seen in printer folder/control panel of W2K.
3. R-click properties --> error message says drivers not installed,
prompting me to install drivers.
The NDPS pushed down is not able to be used for printing!
Additional info:
1. NDS and Bindery queue pushed down suffered from "driver is not
digitally signed", preventing me from logging in after authenticating
with NDS!
2. ZFD 2 is OK for NDS and Bindery queues, though the absence of
NDPS(expected)
Is there anything amiss with the deployment?
Thanks and regards,
James Tan
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5rc1 (Darwin)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFBSl4h76FgYr+7DNYRAgXKAJwKL0xeXKcjAdBicmohNG 7Oypf7IgCfQN5E
fPpuQ1jQaHRNsyDJotP+vWA=
=ktRX
-----END PGP SIGNATURE-----

James,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses: http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Oce, Print server/Qserver and NDPS Printer agents

We have an Oce TDS600 (the controller for an Oce 9600 plotter and a large format scanner). We tried a long time ago to set it up as a NDPS printer but it never worked right. We then went to the tried and true queue based printing (printer, print server and queue) and things were cooking along well until we upgraded the server hosting all of this from NW 5.1 to NW 6.5. Two of the three printers being serviced through "qserver mode" would not print. The main printer we use, the Oce was one of these (the other was an HP 2800CP large format color inkjet plotter). the printer that kept working was a Xerox DocuColor 3535.
The only clues we had were that the print server was listed as being down. We tied recreating the printers, print servers and queues, no joy. After a day of panic, the only thing that got it working was to set up NDPS printer agents and have them service the queues through LPR. This broke the log jamb and allowed us to get the back log of print jobs in the queues.
So, what did I mess up? What about NW 6.5 doesn't like legacy printing? We still cant print directly through the NDPS Printer agents, but we can print through the queues. There are LPR communication problems between the PA and the TDS600 controller. I couldn't find anything on the naming for the LPR printer for this model of Oce Printer (the external controller is not an EFI fiery) so I left it at the default of "PASSTHROUGH".
Any clues?

Daniel,
> So, what did I mess up? What about NW 6.5 doesn't like legacy printing? We still cant print directly
through the NDPS Printer agents, but we can print through the queues. There are LPR communication
problems between the PA and the TDS600 controller. I couldn't find anything on the naming for the LPR
printer for this model of Oce Printer (the external controller is not an EFI fiery) so I left it at the
default of "PASSTHROUGH".
>
Well, PASSTHROUGH is virtually always wrong. The following TID gives the correct name to use for a
number of printers:
http://support.novell.com/cgi-bin/se...?/10080373.htm
If your printer is not listed, then check the printer documentation. While many printers do not include
instructions on how to use the printer from Novell's NDPS or iPrint, they generally include instructions
on how to access the printer from Unix machines or from Windows machines using LPR. In those
instructions or sample configuration files, you generally find the correct name to use in the LPR
configuration.
Marcel Cox
Novell Support Connection SysOp
http://support.novell.com/forums/

JBOSS jndi Datasource: jdbc not bound

Im adding an jndi Datasource to JBOSS 4.0.2.
1. i copied jdbc driver to JBOSS_HOME/server/default/lib.
2. i copied following ds.xml to JBOSS_HOME/server/default/deploy (its based ony the mysql-ds.xml from the samples)
<?xml version="1.0" encoding="UTF-8"?>
<datasources>
<local-tx-datasource>
    <jndi-name>jndi-name</jndi-name>
    <connection-url>jdbc:mysql://localhost:3306/databasename</connection-url>
    <driver-class>org.gjt.mm.mysql.Driver</driver-class>
    <user-name>username</user-name>
    <password>password</password>
    <exception-sorter-class-name>org.jboss.resource.adapter.jdbc.vendor.MySQLExceptionSorter</exception-sorter-class-name>
    
    
    
    <metadata>
       <type-mapping>mySQL</type-mapping>
    </metadata>
</local-tx-datasource>
</datasources>I look this up using java:jndi-name. Works perfect.
For compatibility with other containers, i want to move my jndi-datasource to java:comp/env/jdbc/jndi-name
So i change my ds-description:
<?xml version="1.0" encoding="UTF-8"?>
<datasources>
<local-tx-datasource>
    <jndi-name>comp/env/jdbc/jndi-name</jndi-name>
    <connection-url>jdbc:mysql://localhost:3306/databasename</connection-url>
    <driver-class>org.gjt.mm.mysql.Driver</driver-class>
    <user-name>username</user-name>
    <password>password</password>
    <exception-sorter-class-name>org.jboss.resource.adapter.jdbc.vendor.MySQLExceptionSorter</exception-sorter-class-name>
    
    
    
    <metadata>
       <type-mapping>mySQL</type-mapping>
    </metadata>
</local-tx-datasource>
</datasources>Looking this up with java:comp/env/jdbc/jndi-name leads to Could not find datasource: java:comp/env/jdbc/jndi-name
javax.naming.NameNotFoundException: jdbc not bound
Some lines above jboss prints:
[WrapperDataSourceService] Bound connection factory for resource adapter for ConnectionManager 'jboss.jca:name=comp/env/jdbc/jndi-name,service=DataSourceBinding to JNDI name 'java:comp/env/jdbc/jndi-name
Please can somebody explain what the problem is about binding a datasource somewhere else than directly to "java:"

In web.xml making the following entry:
<web-app>
<description>MySQL Test App</description>
<resource-ref>
<description>DB Connection</description>
<res-ref-name>jdbc/test</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
Next, add a file jboss-web.xml under WEB-INF/ folder of the web-application. This file should contain entry as:
<jboss-web>
<resource-ref>
<description>DB Connection</description>
<res-ref-name>jdbc/test</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<jndi-name>java:/jdbc/test</jndi-name>
<res-auth>Container</res-auth>
</resource-ref>
</jboss-web>
Next, in JBOSS_HOME/server/default/deploy folder make a xx-ds.xml file or else, a similiar file can be found in that same folder with the name hsqldb-ds.xml. Make following entries in that xml file:
<datasources>
<local-tx-datasource>
<jndi-name>/jdbc/test</jndi-name>
<type-mapping>MySQL</type-mapping>
<connection-url>jdbc:mysql://localhost:3306/shopping_cart</connection-url>
<driver-class>com.mysql.jdbc.Driver</driver-class>
<user-name>root</user-name>
<password>root123</password>
<min-pool-size>1</min-pool-size>
<max-pool-size>5</max-pool-size>
</local-tx-datasource>
This should bind the jndi name.
In our client application, we need to look up as:
Context ctx = new InitialContext();
DataSource ds = (DataSource)ctx.lookup("java:/jdbc/test");
Connection conn = ds.getConnection();
This works perfectly.

Ip address is not bound

I've been setting up a migration from NW to OES2 sp2. After some initial glitches, the NW server seems to be doing fine, but the oes server is still giving me grief. I get a mapping error in miggui when I configure the file system, but I can get around that with the nwmap command. I decided to run the NSA against the oes server and it gives me a critical message:
Product: OES2 Migration
Message: IP address is not bound on the server, ip: <ip address>
Then in the Warnings, under category Connectivity and product Network, I see:
"Basic Service Health; Review Changes in RPM Validation: sysconfig in network.txt"
Any ideas? I don't see any problem with networking through this IP. Should I check something in the config file under /etc/sysconfig/network? Thanks.

zenking,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Receiving printer not responding on computer screen. Unplugged, reinstalled wi-fi printer...nothing.

Cannot get printer to respond. One computer will print, the other gets printer not responding message.
We have reinstalled the printer, unplugged everything to no avail. Anybody have a solution?

Hi, Sora!
So that the Community can help you better, we will need to know exactly which operating systems are running on your computers, and which applications you're trying to print from. That, and any other details you'd like to give will help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks and have a great day!

ORA-01008 All variables are not bound

Hi I am running this query and getting this exception ORA-01008 All variables are not bound .
Could anyone please insight ?
SELECT EQMT_INGT_LOG_ID, EQMT_ID,
XMLSerialize(DOCUMENT XMLType(ingLog.BUCK_SLIP_XML) AS CLOB) BUCK_SLIP_XML
FROM TOS_EQMT_INGT_LOG ingLog
where BUCK_SLIP_XML is not null and ingt_date between to_date(:fromDate, 'MM/DD/YYYY HH24:MI')
and to_date(:toDate,'MM/DD/YYYY HH24:MI' )
and eqmt_id in (select eqmt_id from tos_eqmt
where eqmt_init = :eqmtInit and eqmt_nbr = :eqmtNbr
and orig_loca_id in (select loca_id from tos_loca where altn_src_sys_stn_id = :circ7 ))
and SCAC = :scac
and STCC = :stcc
and SHPR_NAME = :shprName
and CNSE_NAME = :cnseName
and driv_id in (select driv_id from tos_driv where lcns = :lcns )
and driv_id in (select driv_id from tos_driv where sabv = :sabv )
and ingt_stat_ind = :ingtStatInd
and BUCK_SLIP_XML like :inspectedBy
ORDER BY INGT_DATE

Slightly off-topic but what do you think this does :
XMLSerialize(DOCUMENT XMLType(ingLog.BUCK_SLIP_XML) AS CLOB) BUCK_SLIP_XML?

Hp 5535 will not scan, error message printer not found

I have a HP Envy 5535. I have only been able to scan one time with it. I scanned 22 documents, after running HP Scan Doc 4.4. Each time the HP Scan Doc states that everything is OK, yet as soon as I try to do even a test scan, I get the error message "Printer not found." I have also tried to run this scan with my McAfee virus firewall off, and it still doesn't work. I have also identified it on McAfee as part of my network.
This question was solved.
View Solution.

Hi @prazdancr,
Welcome to the HP Forums!
I am sorry that you cannot scan with your HP Envy 5535, but I am happy to help!
For further assistance I will need to know:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please try going through this scanning guide. A 'The computer is not responding' Error Message Displays During Scanning.
Hope to hear from you soon, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

C309a printer not conecting wirelessly- printer's wireless wizard not finding router- rebecca

new comp. running windows 7. i've downloaded driver updates, cd for printer... HP diagnostic tool etc. turned every device off including router, modem, and rebooted. reset router to defaults. now for some reason printer not finding wireless router in NEW network name wheni run wireless wizard from printer. says no link on printer. on new comp says printer disconnected. diagnostic tool says incompatible with windows 7. have downloaded updates from HP as of december. wireless network test says fail under wireless working. all other comps in house can get on wireless internet. attempted to manually type in routers info... ip address etc... still says no link on printer. did the routerlogin.com for my netgear router thats 3 years old....for ip's etc...
i need to get the printer to find the wireless router!!!!!!

First, let's make sure the printer is OK. From the front of the printer: Setup > Network > Wireless Network Test. Does it pass all its tests?
Next, in the same Network menu, Reset Network Defaults.
Now, if all that goes well, from the same Network menu run Wireless Setup WIzard.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Installed a wireless canon Pixma MX432 printer back in November for use with my Mac Book Air. All was working normally until this past week when I began getting a message, "printer not connected." What is going on? Netgear Wireless N Router seems to be ok

My new canon Pixma MX432 printer is not printing. It was printing fine until about ten days ago. I use a Netgear Wireless N router, which is also new. What do I need to do. I get a message when trying to print that says "printer not connected." In addition, my old Gateway laptop will still print fine apparently because it has a cable connection to the printer. Puzzled!

Have you tried rebooting the router? I would unplug it, wait a few seconds, then plug it back in. Be sure you know the password etc. if that doesn't work, try unplugging and rebooting the printer. Good luck!

Problem in WEB-UI field (Not Bound)

Hi Experts,
   I am new to CRM Technical, I have added new standard field (Date Of Birth) thourgh component work bench 'BSP_WD_CMPWB' in 'Z_IC_AGENT' business role. after execution this business roles i could able to see this DOB field but its showing with 'NOT BOUND'
1.   Can any one suggest me why that newly added field showing like that? Do i need to add any other setting or coding ?
2.   How to add new Z field in this business role. Please tell me the right procedure.
Thanks & Regards,
Ramesh.

Hi Ramesh,
please open you component in transaction BSP_WD_CMPWB.
Go to the contextnode where you added your attribute.
Open the GET_ Method of your attribute and set here an external breakpoint.
Now go back to the webclient UI, restart it and try again.
You will stop at your breakpoint and you will be able to debug your issue.
Kind regards
Manfred

When I try to print from web page I get "printer not activated - error code 30", but I can copy text into Word document & printer works.

I am unable to print anything from an internet web page. I continually get "printer not activated, error code- 30" followed by "An unknown error occurred while printing". I can copy the material from the web page, place into a Word document and then print. This just started yesterday and I have no idea why. Would appreciate your advice!

See this:
[http://kb.mozillazine.org/Problems_printing_web_pages#Prints_to_a_small_portion_of_the_page]

When I try to print from web page I get "printer not activated - error code 30", printer works on Internet Explorer

When I try to print from web page I get a dialogue box "Printer not activated - error code 30" followed by a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a Word document, I can print a copy. This issue just started this week; I have not encountered this problem prior to this week. Please advise.

What does that error message say?
See this: http://kb.mozillazine.org/Problems_printing_web_pages

I recently replaced my dead airport router with a netgear91-5g router and synced it successfully to my Lexmark Pro 915 printer and my computer and yet when I try to print wirelessly I get the message: "printer not connected; printer offline".

I recently replaced my dead airport router with a Netgear91-5g router and synced it successfully to my Lexmark Pro 915 printer and my computer; yet when I try to print wirelessly I get the message: "printer not connected; printer offline". Lexmark support verified that my printer was connected to the new router and the problem was with the computer's printer configuration and they could reconfigure it online if I paid for their "Premium Support" services ($119 for one year, 3 fixes). I declined, feeling sure that this is something I could do if I knew how. Could it be an incompatability issue with OS 10.8.3?

You saved me $$$ that I can ill afford on my fixed income. I was very unhappy with the "support" from Lexmark... what a rip off! Thank you dwb!

Printer not printing AND Matching Screen colors to Print colors. Any advice is apreciated!!

Hello - I have 2 questions regarding printing to an Epson and also regarding the monitor colors Not matching the print colors working from Photoshop CS4 on a Mac with a Maverick [ 10.9.3 ] OS. My issues are Not about my own printers or software. I have been tutoring a friend via phone in Photoshop; he has CS4 and is working on Mac OS 10.9.3.
1- We found that he could print nearly fine [ nearly accurate colors ] from Lightroom on his computer, version 5.4. But when he tries to print from Photoshop he cannot make a print. There is clear communication between the computer and the printer, as, when he sent the file to print, the printer [ an Epson 3880 ] responded by automatically changing to Photo Black from Matte. Then, it opens the rollers as if to print, but, it them stops and the menu [ on the Printer ] says 'Ready.' The paper is 4x6” Moab Lasal paper 300gsm. This issue of Not printing is only with this Moab Lasal luster paper, for which he Does have the IIC profile, and we always make sure ‘Photoshop manages colors,’ not the printer. To address the issue of the printer Not printing at all using a non-Epson brand paper, we have tried seemingly everything from deleting and re-adding the printer from the Library / Printers, resetting everything [ printer computer software etc ], trying different settings in the Printer window and the Print Settings window. Including changing the media profile, platen gap, etc.
2- My other and more important question is – after we Do get a print, we cannot match the monitor color to the print. [ We havE been able to get a print using Epson brand paper. Which is odd because we have the ICC profiles for both papers ]. To address the color matching issue, he has told me he calibrated the monitor with a Spyder, and here are a few other variables that I can relay that may or may not be affecting his color-issues:
He iS viewing his prints in a dayliglht-rated lighting environment
The monitor is an iMac glossy finish monitor, not an anti-glare
We tried working and printing from both an 8-bit and also a 16-bit color-space and also 16-bit printing
The color shift is slightly but noticeably toward Magenta.
His printer is Not calibrated
Please let me know what else we can do, any known glitches that may be an issue with his older version of CS, any tips you can suggest.
Thanks very much!

I don't have that printer and I'm not on Mac, so someone else has to step in there. Generally a green/magenta cast indicates none/double printer color management. But then I don't know what you mean by "slight".
The Spyders aren't the most consistent and reliable calibrators out there. I had a Spyder 3 sensor that I just threw away because it gave a distinct red cast (I have several other calibrators, so there was no doubt). Another potential problem is that with most calibrators you can only adjust the white point along the blue/yellow Kelvin scale, but not on the green/magenta scale. This is often necessary to get a good white point color. In this case you need to use the monitor's OSD controls, and if possible the "pre-calibration" function in the calibrator to measure and monitor it - if that function exists. And I don't know if this is possible with an iMac.
This is basically a question of getting the white point right, both on the blue/yellow and the green/magenta axis (and luminance of course). The goal is to get a visual match to paper white on screen. With the white point properly set, neutral color balance relates to that, and the rest more or less follows by itself. (In addition you should set the proper black point/contrast for full control, but that's not the issue here).

NDPS Printer not bound on Novell 6.5 SP8

Similar Messages

Maybe you are looking for