NDPS printer push via zfd3.2 not successful
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi all,
~ I need expert advise here.
Steps:
1. Install NW6.0 + with or without SP + ZFD3.2 SP3
2. Use NWAdmin32:
~ - create NDPS broker and manager - loaded them via console
~ - created NDPS queue to a printer agent (via object creation)
~ - added builin drivers into the queue, for W2K.
2. Use C1 to create a User Policy Package
~ - associate to a user in the same container
~ - configured and activated Event upon login to install the NDPS
printer + toggle default
3. Login as a the specified user from a W2K.
Results:
1. Observed that drivers were added in Event Viewer/Log of W2K.
2. Printer icon seen in printer folder/control panel of W2K.
3. R-click properties --> error message says drivers not installed,
prompting me to install drivers.
The NDPS pushed down is not able to be used for printing!
Additional info:
1. NDS and Bindery queue pushed down suffered from "driver is not
digitally signed", preventing me from logging in after authenticating
with NDS!
2. ZFD 2 is OK for NDS and Bindery queues, though the absence of
NDPS(expected)
Is there anything amiss with the deployment?
Thanks and regards,
James Tan
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5rc1 (Darwin)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFBSl4h76FgYr+7DNYRAgXKAJwKL0xeXKcjAdBicmohNG 7Oypf7IgCfQN5E
fPpuQ1jQaHRNsyDJotP+vWA=
=ktRX
-----END PGP SIGNATURE-----
James,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses: http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/
Similar Messages
-
Printer connected via WiFi, will not print.
I have a MacBook Pro (2008) running Yosemite 10.10.1 and it is connected wirelessly to my Canon MP530 printer (using a print server). Everything is connected correctly, but when I send a file to print, nothing happens. I am pretty sure I have the correct driver installed because this identical setup works on my other Mac (2009) also running Yosemite 10.10.1.
The only thing I can remotely think of is that on the Mac that won't print, it is an older Mac (2008) running Yosemite. On the Mac that wireless printing works on, it is a newer model (2009) also running Yosemite. I suspect it may be a hardware problem, but not sure.
(and yes, I have also tried the Gutenprint drivers, with no result). I can print from the 2008 Mac using the 2009 Mac as a server, but that's it. I just want to be able to print from the 2009 Mac without connecting it directly to the printer or using the 2009 Mac as a "server". Why does one Mac print wirelessly while the other one will not?
Any suggestions?(1) Mac that prints directly (wireless):
PS-736C74-U1:
Status: Idle
Print Server: Local
Driver Version: 11.7.0.0
Default: Yes
System Printer Sharing: Yes
Shared: Yes
URI: dnssd://PS-736C74-U1._printer._tcp.local.
PPD: Canon MP530
PPD File Version: 11.7.0.0
PostScript Version: (3010.000) 705
CUPS Version: 2.0.0 (cups-408)
Scanning support: No
Printer Commands: PrintSelfTestPage
CUPS filters:
Raster2CanonIJ:
Path: /Library/Printers/Canon/BJPrinter/Filters/Raster2CanonIJ/Raster2CanonIJ.bundle/ Contents/MacOS/Raster2CanonIJ
Permissions: rwxr-xr-x
Version: 11.7.0
Command2CanonIJ:
Path: /Library/Printers/Canon/BJPrinter/Filters/Command2CanonIJ.bundle/Contents/MacOS /Command2CanonIJ
Permissions: rwxr-xr-x
Version: 11.7.0
Fax support: No
Printer utility: /Library/Printers/Canon/BJPrinter/Utilities/CanonIJPrinterUtility.app
Printer utility version: 11.7.0
PDEs:
CanonIJPDE.bundle:
Sandbox compliant: Yes
(2) Mac that does not print directly, but prints via Mac 1 (wireless):
PS-736C74-U1 @ Wilda Duncan’s MacBook Pro:
Status: Idle
Print Server: Remote
Default: Yes
URI: dnssd://PS-736C74-U1%20%40%20Wilda%20Duncan%E2%80%99s%20MacBook%20Pro._ipps._tc p.local./printers/PS_736C74_U1?uuid=f0407db8-e96e-3ed2-77c1-2c7544c42120
PPD: Canon MP530 -
Whenever I try to transfer an ebook to my nook (via a macbook), it says adobe has quit unexpectedly and gives me an error code. Does not successfully transfer the ebook.
I was having the same problem using ADE 4.0.2 and Mac 10.10.1. I finally gave up and deleted ADE version 4 and reinstalled version 3.0. Works fine, and I can check out ebooks for my Nook using ADE.
-
I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8
I have downloaded the latest UFR II driver. (UK Version)
I am trying to connect to the printer but the printer is not appearing in my Print/Fax Preferences.
When I click the box "More Printers" under the Default printer the drop down box gives me a heading "Canon IPv6 (UFRII) with the option to add or cancel. (The add is highlighted). But there are no printers showing in the box. Nothing. Can anyone help?
Is there a problem with my Mac setup or maybe a setting in my printer?Mac UFR II Printmonitor
UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
Other Printers:
Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities] -
A printer that I have connected to my iMac via usb in not showing up in printer options on my iPhone or iPad and it use to before I upgraded to 8.1. How can I fix this?
Is it an Airprint-compatible printer, and is its WiFi enabled if it is? (see: About AirPrint)
If it isn't an Airprint supported printer, then you need a 3rd party driver on your iMac to print from an iPhone. Such as Printopia. As it worked in the past you probably have such a printer driver installed; check and see if it's running.
Beyond that try restarting the printer, restarting the phone, restarting your router, and restarting your computer. -
IBook G4 not able to locate printer driver via bluetooth
Please help! My computer can't locate my new printer driver via bluetooth, only with the USB cable connected. I'm positive it's not the printer because my boyfriend's computer located the printer. My operating system is Mac OS X (10.5.5). I've never used the internal bluetooth on this computer before.
Thanks for any advice!Hello eeoorhee,
Welcome to the HP Forums.
I see that you are having an issue with connecting the printer over the wireless connection.
I have a few steps that we can take to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I also suggest that you do an uinstall of the software and drivers and reinstall. Please click on the link that I have added for when The Printer is Not Found During Wireless Installation.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
TS1702 IPad prints photos via canon printer but will not print a document
My I pad prints photos via canon air printer but will not print a document
Which model Canon printer? Is it AirPrint compatible?
-
Can't print wirelessly to HP6500 that is successfully connected
I am getting Error-Printing when try to print anything to wirelessly connected HP6500 Wireless.
Printer is successfully connected to wireless home network: Wireless Network Test Report gives IP address and says all status is PASSED.
When type IP address in explorer window, can successfully view printer information, says it is connected wirelessly.
But when I try to print a document, including test page, get error message that printer is not connected.
I HAVE used this same printer connected via USB before, but went and re-installed drivers and added the device wirelessly with latest driver download from HP.
What am I missing??Just for printing purposes, you can go to you Printers and Faxes window(Printers for Windows 7 and Vista), click on add printer, Add local Printer, it'll ask you for the ip address then eventually you should be able to print.
Or if you needthe full functionality(Including Scanning), insert the disk>go to my computer>right click on cd-rom drive>explore/open>util>ccc>uninstall_l2>restart the computer
-run the installation again
...and boom! you'l be able to print and scan wirelessly!
I just hope my replies will help you solve your problems! -
I just downloaded a new software update to my ipod touch and now the ipod and screen are frozen. I received a message that the download was not successful and now my screen is showing the blue round itunes symbol with an arrow pointing to the symbol and shows a cable below it. I have tried the restart of pushing the two buttons together and waiting 10 seconds for the apple symbol which appears and then go backs to the same stuck symbol. My computer is not recognizing the ipod either and will not connect. What needs to be done? Thanks.
Try manually placin the iPod in Recovery Mode and restore via iTunes.
Next try DFU mode and restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
SCCM Client Push Installation Wizard does not install the client. CCMSetup folder - not created
Hello,
I have tried running the Client Push wizard for a single computer or a pilot collection of 8 computers, the result is always
the same - no SCCM client is installed on any computer.
The computers are running 32-bit Windows XP SP2.
The Windows firewall is disabled.
The client push installation account is setup and have domain admin and local admin privileges. Client Push automatic method
is not enabled.
The domain is AD WIndows 2000.
The SCCM server is running Windows 2003 R2 SP2 64bit Standard.
The AD schema has been extended.
MP, and SLP are installed and published. (MP is published in DNS as well.)
FSP is installed.
MP, SLP and FSP are running on the same server.
SQL 2005 server is running locally.
System management container is created and all rights and permissions delegated.
With the Push installation account I can access C$ share on the client computer from the SCCM server.
RPC, Remote registry, WMI services are running on the client machines.
All prerequisites are installed from the client folder on SCCM server- latest BITS 2.5, Windows installer 3.1 and MSXML6.
All computers are in the same IP subnet which is listed in the boundaries.
Yet, the client is not being installed.
No CCMSetup folder is created on the client machines in Windows\System32 folder, so it is really difficult to troubleshoot
what the is the issue. I do not see anything helpful in the ccm.log on the server.
I have tried running the CCMSetup.exe manually on one of the workstations and that was successful and reported back to the
SCCM server / console.
What else I should check / try? I really want to push agents via the wizard.
Thank you,
PeterHi Wally,
I have changed 2 things:
1. Enabed automatic push installation (so I am not usign the wizard any more)
2. Changed the IP subnet to IP ranges in the site boundairies.
After runnignt the discovery, I was able to see some activities in the ccm.log. A ccmsetup folder is now created but the agent is still not instaleld. Here is the ccmsetup.log
==================================
<![LOG[==========[ ccmsetup started in process 3140 ]==========]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:8853">
<![LOG[Version: 4.0.5931.0000]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:1913">
<![LOG[Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:3937">
<![LOG[Command line: "C:\WINDOWS\system32\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:3946">
<![LOG[CCMHTTPPORT: 80]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7851">
<![LOG[CCMHTTPSPORT: 443]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7866">
<![LOG[CCMHTTPSSTATE: 0]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7884">
<![LOG[CCMHTTPSCERTNAME: ]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7912">
<![LOG[FSP: HFXDBSSOM.CORP.EASTLINK.CA]LOG]!><time="09:45:07.045+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7927">
<![LOG[CCMFIRSTCERT: 0]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:7969">
<![LOG[Config file: C:\WINDOWS\system32\ccmsetup\MobileClient.tcf]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4341">
<![LOG[Retry time: 10 minute(s)]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4342">
<![LOG[MSI log file: ]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4343">
<![LOG[MSI properties: INSTALL="ALL" SMSSITECODE="PHX" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="0" FSP="HFXDBSSOM.CORP.EASTLINK.CA" CCMFIRSTCERT="0"]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4344">
<![LOG[Source List:]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4352">
<![LOG[ \\HFXDBSSOM.corp.eastlink.ca\SMSClient]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4359">
<![LOG[ \\HFXDBSSOM\SMSClient]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4368">
<![LOG[MPs:]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4371">
<![LOG[ HFXDBSSOM.corp.eastlink.ca]LOG]!><time="09:45:07.061+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:4386">
<![LOG[Updated security on object C:\WINDOWS\system32\ccmsetup\.]LOG]!><time="09:45:07.076+240" date="12-06-2007" component="ccmsetup" context="" type="0" thread="3108" file="ccmsetup.cpp:8692">
<![LOG[Sending Fallback Status Point message, STATEID='100'.]LOG]!><time="09:45:07.076+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="3108" file="ccmsetup.cpp:9169">
<![LOG[State message with TopicType 800 and TopicId {A450B407-619B-4777-B77E-C3352753B58A} has been sent to the FSP]LOG]!><time="09:45:07.326+240" date="12-06-2007" component="FSPStateMessage" context="" type="1" thread="3108" file="fsputillib.cpp:730">
<![LOG[Running as user "SYSTEM"]LOG]!><time="09:45:07.326+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:2534">
<![LOG[Detected 24292 MB free disk space on system drive.]LOG]!><time="09:45:07.326+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:465">
<![LOG[DetectWindowsEmbeddedFBWF() Detecting OS Version]LOG]!><time="09:45:07.342+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:511">
<![LOG[Client OS is not Windows XP Embedded]LOG]!><time="09:45:07.342+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:548">
<![LOG[Successfully ran BITS check.]LOG]!><time="09:45:08.745+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:6948">
<![LOG[Failed to successfully complete HTTP request. (StatusCode at WinHttpQueryHeaders: 401)]LOG]!><time="09:45:08.745+240" date="12-06-2007" component="ccmsetup" context="" type="3" thread="2600" file="ccmsetup.cpp:5813">
<![LOG[Sending Fallback Status Point message, STATEID='308'.]LOG]!><time="09:45:08.760+240" date="12-06-2007" component="ccmsetup" context="" type="1" thread="2600" file="ccmsetup.cpp:9169">
<![LOG[State message with TopicType 800 and TopicId {3BFABF82-FB74-43FB-8A4A-6DFDEAEAC25C} has been sent to the FSP]LOG]!><time="09:45:08.776+240" date="12-06-2007" component="FSPStateMessage" context="" type="1" thread="2600" file="fsputillib.cpp:730">
==============================================================
There are two red errors I am concerned about:
"Failed to successfully complete HTTP request. (StatusCode at WinHttpQueryHeaders: 401)
and
"Failed to download 'WindwosXP-KB923845-x86-ENU.exe' from http://HFXDBSSOM.corp.eastlink.ca/CCM_Client/i386/BITS25 with error code 0x80004005).
What should I do to resolve these errors?
Thanks,
Peter -
Can't connect computers to printer (b210) via network because there are "other networks"
I can't connect computers to printer (b210) via network because there are "other networks matching your network name". This makes no sense at all. I have several Apple devices (iPhone, iPad, iMac) all with the latest software. The printer works fine when using the USB connection to my iMac. Nothing I do seems to solve this problem (rebooting, re-configuring, etc.). Help.
Hi Cgold,
If there are other networks matching your network name, then the printer will have issues connecting when you run the wireless setup wizard.
However, there are other options:
If your router supports 'Wi-Fi Protected Setup' with either a button to push on the router, or a pin to enter, you can choose that connection option under the wireless menu on your printer.
or
Change the network name that your router is broadcasting within the web page of your router (NOTE-this would force you to re-join all wireless devices back to the new network name you have created).
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP. -
Print Module templates layouts do not update on the fly
Print layouts do not update on the fly when attempting to choose between various Print Module>Template Browser> Lightroom or User templates. This occurs in all three Layout Styles. The very first layout chosen in Single Image/Contact Sheet, Picture Package, or Custom Package is the permanent 'default' and cannot be changed. The Preview will show as expected however any image stays stuck in the very first layout I chose after installing LR4 beta.
For example, I first chose Template Browser>Lightroom Templates>Maximum Size, and Layout Style>Single Image/Contact Sheet. Clicking through any other Templates (Lightroom or User defined) will alter the preview but not the layout display in the Print window. Same problem in either of the other Layout styles. I have been trying for days to rectify this, but it seems somehow more difficult than LR3. and not what I expect.
As a comparison, using the same steps in LR3 works perfectly as all print template/layouts can be changed on the fly as expected. I have no problems generating different layouts in LR3 and have been using LR print module since version 1 without this issue.
Is this a bug or are there any extra steps or workarounds I have not discovered? Any other testers seen this?Update with more info. What am I doing wrong, if anything?
Print layouts do not update on the fly when attempting to choose between various Print Module>Template Browser> Lightroom or User templates. This is not a hang since the layouts do not change after the initial choice no matter how much time elapsed.
iMac OS 10.6.8. 8GB RAM.Processor Intel Core 2 Duo. NVIDIA GeForce 8800 GS.
The steps as follows:
1) Lightroom 3.6 & LR4Beta exist side by side.
2) LR4 Beta> Print Module;
3) From filmstrip choose image;
4) Template Browser> Lightroom4Beta Templates>Maximum Size;
5) Preview displays as expected;
6) Layout Styles>Single Image/Contact Sheets
7) Template Browser> Lightroom4Beta Templates>click through any other templates (Lightroom or User defined);
8) Image layout in main window does not update;
9) Previews update;
10) Layout Style>Picture Package;
11) Template Browser>Maximum size is then automatically shown, however the template in the main window is actually (1) 7x5, (2) 2.5x3.5;
12) Any further attempts to change the layouts regardless of Style Layout choices are not successful.
13) Close LR4Beta>re-open LR4Beta;
14) Repeat test;
15) Print Module layouts do not update on the fly as expected;
16) Close LR4Beta and all applications;
17) Reboot iMac.
18) Open LR4Beta only;
19) LR4Beta>Print Module>Template Browser >Lightroom Templates>Maximum Size;
20) Image displays in main layout window with Template and Preview display as expected;
21) Choose different image>Template Browser>Lightroom Templates>Maximum Size;
22) Click through templates, layouts DO NOT update in main window although previews do automatically update.
23) CONCLUSION - In Lightroom 4 Beta>Print Module>Template Browser, image layouts do not change after initial choice as expected.
I posted this on Photoshop.com as a problem. -
I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport -
Can't print wirelessly via time capsule on a windows 7 computer
I have an epson rx580 printer that when attached to my time capsule, I can print wirelessly with no problem on my Imac however I can't get my Sony / windows 7 laptop to print properly via the time capsule... I have installed bonjour on the laptop and setup the printer with bonjour however the printer will print about a half a page and stop and get stuck until I turn it off.. I have downloaded all the latest windows drivers and the firmware to the time capsule is up to date. Does anybody have any experience with getting windows 7 to print properly on a time capsule?
Have you plugged the printer directly into the win7 laptop and tried to print, using the current drivers. Is that successful?
If the job is failing half way through, make sure the permissions are correct on everything and make sure you turn on guest access on the TC.
Other than that, sorry I don't really know what is going wrong. Sometimes the issue is two way communications is failing. Try plugging the laptop into the TC with ethernet. -
So how do I get notified of updates in this forum? As I said: I don't understand the thing you call LIVE BOOKMARKS I have never used them, and most forums I have used notify VIA E-mail not giving out my E-mail address, or other private information when a reply has been made to the thread in question, so how do I get notified of updates in this forum? I have seen no normal options for setting my viewing preferences used for this forum. Thank You.
Thanks for your reply via email/msg. He wrote:
If you are interested in the actual design data for the Xeon processor, go to the Intel site and the actual CPU part numbers are:
Xeon 4 core - E5.1620v2
Xeon 6 core - E5.1650v2
Xeon 8 core - E5.1680v2
Xeon 12 core - E5.2697v2
I read that the CPU is easy to swap out but am sure something goes wrong at a certain point - even if solderedon they make material to absorb the solder, making your work area VERY clean.
My Question now is this, get an 8 core, then replace with 2 3.7 QUAD CHIPS, what would happen?
I also noticed that the 8 core Mac Pro is 3.0 when in fact they do have a 3.4 8 core chip, so 2 =16? Or if correct, wouldn't you be able to replace a QUAD CHIP WITH THAT? I;M SURE THEY ARE UO TO SOMETHING AS 1) WE HAVE SEEN NO AUDIO FPU OR PERHAPS I SHOULD CHECK OUT PC MAKERS WINDOWS machines for Sisoft Sandra "B-E-N-C-H-M-A-R-K-S" -
SOMETHINGS UP AND AM SURE WE'LL ALL BE PLEASED, AS the mac pro was announced Last year, barely made the December mark, then pushed to January, then February and now April.
Would rather wait and have it done correct than released to early only to have it benchmarked in audio and found to be slower in a few areas- - - the logical part of my brain is wondering what else I would have to swap out as I am sure it would run, and fine for a while, then, poof....
PEACE===AM SURE APPLE WILL BLOW US AWAY - they have to figure out how to increase the power for 150 watts or make the GPU work which in regard to FPU, I thought was NVIDIA?
Maybe you are looking for
-
How to create view on dates for a given month for matrix
hi all i have the following 2 tables Task_Master Task_ID Task_Name Task_Details Task_ID Task_Date Task_Count Both the tables are linked through primary and foreign keys...just want to create a view where i will provide only month and it will return t
-
Errors in flat file extraction
Experts pls ans what R the possible ERRORS while extracting data from flat file to SAP BW 3.5 thanks in advance ramakrishna
-
CS5 Will not open more than one photo/file simultaneously
In CS5, when I select more than one image to open together, only the last image in the selected group opens. Also, when I select "new" to open a new page on whitch to paste multiple copies of an open image, the open image deletes. Have never had this
-
HT1918 I can't buy anything on I tune forgot my stupid answers on questions
Change my security question forgot answers
-
Suddenly my imessage and facetime stop working both for iphone4 and ipad, i tried possible online solutions but it didn't work. Message such as "could not connect, check your network connection" etc... Help please am getting frustrated here....