NDStray.exe - Application Error on Satellite A305-S6916

Recently, I have begun to experience an error when I first boot my computer:
NDStray.exe - Application Error
The application failed to initialize properly (0xc0000006). Click OK to terminate the application
or
The exception unkown software exception (0xc0000005) occured in the application at location 0x0022ab4. Click OK to terminate the application.
When I click okay, everything seems to run normally with two exceptions:
1. My network icon shows that I am disconnected from any wireless networks, but I am able to browse the web normally.
2. I experience a 30-45 second lag every time I launch a program and often while using any program, especially if that program uses the internet.
I am running on a Satellite A305-S6916, model# PSAGCU-09S01S, with Windows Vista. I am fully up to date on Windows Updates. I ran a virus scan through AVG and did not find anything, a spyware/malware scan through Spybot S&D, but did not find anything. I did not originally connect the error with the lag, so I also defragged and ran the disk cleanup program, none of which have helped at all.
I am unsure of how to resolve this error, any assistance is appreciated. Please let me know if further information is needed. Thank you

Satellite A305-S6916
It's the component of Config Free that supplies the icon in the Notification area. You don't need it.
You can try reinstalling Config Free to get rid of the message.
   Config Free for Windows Vista (32/64bit)
Or you can disable it by clearing the corresponding check box on the Startup tab of the System Configuration utility (msconfig.exe).
-Jerry

Similar Messages

  • Satellite L300D - recovery error BSOD+imagex.exe application error

    Hi,
    My Laptop lost function a while ago due to some unknown errors. I managed to get most of the data out through safemode and have transfered them to my desktop.
    The problem I am having now is repairing my laptop. I have since lost my receipt and therefore unable to claim warranty; but I figured I could restore my computer to its factory state with the recovery disk I created. The original problem and the one I am facing can be seen here...-> http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=153146#153146 <-
    As you can see from that thread, the recovery disk didn't work. So based on the advice I received I went to a Toshiba authorised computer repairs centre today and they replaced my Hard Disk Drive with a Fujitsu SATA 120GB. I then attempted to use the recovery disk but ran into a few hiccups. 1) A BSOD comes up randomly during the restoration i.e. During image copying it would pop up... sometimes it would pop up when it is finalising the recovery. 2) Sometimes, the BSOD will be bipassed and instead, an error would come up at 3% of installation finalising saying that img could not be copied from HDD to C/:! 3)Sometimes an image.exe application error would come up saying 'The instruction at 0x77c45a20 referenced memory at 0x00000000. The memory could not be written. Click on OK to terminate the programme.'
    NOTE: None of the these problems occur in the same recovery trial. But they DO come up randomly and when they do, I have to restart the computer and try again.
    My question is this. Since the last piece of advice was to replace my faulty HDD, and I have done so, why am I still unable to repair my computer? And if it is not the matter of HDD, then what is the problem here? I am desperate in fixing my laptop as it is meant to be my 14 year old desktop replacement. Thank you all for your kind attention; I only hope that there is someone out there who has faced and overcome such a problem before.

    Hi!
    Its not easy to say what the reason is for this. It could be a faulty RAM, mainboard or maybe the HDD again. So it could be bad luck that the new HDD is also faulty
    I think you should test something on your notebook with special diagnostic tools.
    http://www.hitachigst.com/hdd/support/download.htm#DFT
    With the Drive Fitness Test you can test your HDD. Download the CD image, burn it on a CD and boot from it. Then you can test the HDD.
    On the same website is a user guide if you want to know more.
    http://memtest86.com/
    Memtest86 is a diagnostic tool to check the RAM. There you can also download a CD image.
    Its easy to use. Run the test 3-4 hours and then you will see if the RAM has some errors.
    After this post your result. Maybe one the tests can find an error.
    If not you should try it with a Microsoft installation disk. Maybe the recovery disk is scratchy or so
    In you cant find something you should go to the ASP again. Speak with the technicians and explain the situation. I think they will try to help you as fast as possible.
    Bye

  • [SOLVED]Dwm.exe - Application error

    Everytime i start my computer to log in Dwm,exe - application error, before that this other message showed up (dll something) But i got rid of that manually (as in looked for it and delted it) now i'm getting this pop up error, What can i do to get rid of this? I've already tired Maleware software...HELP 

    Satellite L505D-S5903
    You don't make it easy. I don't see that anywhere. Maybe one of these?
    Satellite L505D-S5963
    Satellite L505D-S5983
    I'll assume you have either Windows Vista or Windows 7.
    It's easy to prevent the message during Windows startup. But we're dealing with a system file. There may be other problems. Best to run a file check (sfc /scannow at an elevated command prompt) first.
       Use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista ...
    -Jerry

  • Cmd.exe application error

    We have been receiving the following error message since we purchased our Satellite E105-S1602 last month: cmd.exe application error the application failed to initialize properly (Oxc0000142). Click OK to terminate. Any ideas as to how we can remedy this recurring error?

    Satellite E105-S1602 
    cmd.exe application error the application failed to initialize properly (Oxc0000142). Click OK to terminate.
    Judging from similar experiences reported on the web, you must be trying to open a command prompt when the message occurs. Is that correct?
    If not, what are you doing? Booting Windows? Trying to run an application?
    -Jerry

  • WINWORD.EXE -Application Error The application was unable to start correctly (0xc0000142). Click ok to close the application

    HI 
    when i am trying to open MSWord following message pop up and i can't open MSword any more:
    WINWORD.EXE -Application Error The application was unable to start correctly (0xc0000142). Click ok to close the application.
    Please advise 

    Hi,
    Does Word start in Safe Mode?
    Press Win key + R, type "winword.exe /safe" in the blank box, press Enter.
    If Word can start in Safe Mode, the issue should be related to 3rd-party add-ins, disable the suspicious add-ins to determine which one caused the problem.
    You can also try repairing Office from Control Panel -> Programs and Features, check if this helps.
    Regards,
    Melon Chen
    TechNet Community Support

  • Flash player plugin _12_0_0_77.exe - application error in win 7

    How to solve flash player plugin _12_0_0_77.exe - application error in win 7?

    You get this when doing what?  Is there any additional information in the message?

  • What does firefox.exe-application error mean? Firefox wont even open it just says this, and then click okay to terminate the problem.

    When I go to open up Firefox, it does not open no matter what I try It just pops up this box that says Firefox.exe - application error.
    Then it says the Instruction at "0x798377a9" referenced memory at "0x798377a9". The memory could not be "written".
    Click on OK to termintate the program
    What does this mean? And why cant I use Firefox. I can still use internet explorer just fine.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; InfoPath.1)

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Firefox will not start and I get firefox.exe Application Error with the code 0x00000000, I've tried reloading but always get the same error message!

    Firefox will not start, I've tried opening in safe mode, no joy. I get the firefox.exe application error 0x00000000
    == This happened ==
    Every time Firefox opened
    == Possibly after a windows update ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; YPC 3.2.0; .NET CLR 1.1.4322; InfoPath.1)

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Win7 /Office Updates April 2015 - userinit.exe - Application Error : The application was unable to start correctly (0xc0000018)

    Hi all,
    After updating our acceptence Windows 7 SP1 clients (april updates). We are unable to login the machine.
    Error: userinit.exe - Application Error : The application was unable to start correctly (0xc0000018)
    After rebooting the machine 2times I'm able to login. When I shutdown the machine at the next boot i'm getting the same error again and i'm not able to logon.
    I have no idea where to start. One by one uninstalling updates isn't an option because after a reboot it seems ok.
    Any idea's? Help is welcome.
    The installed updates:
    1. Update (Missing): Update for Microsoft OneDrive for Business (KB2956185) 32-Bit Edition (04e403da-693b-4b76-a7ff-7807aaa8e82b, 200) WUAHandler 15-4-2015 10:35:12 5068 (0x13CC)
    2. Update (Missing): Update for Microsoft Access 2013 (KB2965276) 32-Bit Edition (1292d1c5-e57a-479c-827a-bd91d26995fc, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    3. Update (Missing): Update for Microsoft OneNote 2013 (KB2965264) 32-Bit Edition (161aacb2-973c-4042-8a08-2d7912f46e62, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    4. Update (Missing): Update for Microsoft Outlook 2013 (KB2965270) 32-Bit Edition (216a01f6-8209-42e2-aefc-95cadf8c95ee, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    5. Update (Missing): Update for Skype for Business 2015 (KB2889853) 32-Bit Edition (2510db79-26bb-447c-b2fb-687cb494b0d8, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    6. Update (Missing): Update for Microsoft Project 2013 (KB2965279) 32-Bit Edition (2c49d156-cea9-432f-82c4-3f6b48c8c0ca, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    7. Update (Missing): Update for Microsoft Office 2013 (KB2965262) 32-Bit Edition (40fe3b7e-3e2d-4c11-bf5e-3139196057e0, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    8. Update (Missing): Security Update for Microsoft Word 2013 (KB2965224) 32-Bit Edition (59d17ded-907b-4162-8121-f1ce0c47023c, 201) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    9. Update (Missing): Definition Update for Microsoft Office 2013 (KB2965273) 32-Bit Edition (5bd24951-9c92-42d7-a17a-6eaa4a918dca, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    10. Update (Missing): Update for Microsoft Office 2013 (KB2965218) 32-Bit Edition (5db38391-2220-412f-83ac-28366ac06dd6, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    11. Update (Missing): Update for Microsoft Office 2013 (KB2965267) 32-Bit Edition (6fb5843a-cb0d-4bcb-9be1-4feb3c740681, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    12. Update (Missing): Update for Microsoft Office 2013 (KB2965255) 32-Bit Edition (91fea44d-b1b2-43a3-a82f-b02e56d3d216, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    13. Update (Missing): Update for Microsoft Office 2013 (KB2965268) 32-Bit Edition (9dd67b4e-59e4-40b0-b5c8-7dcabd770d66, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    14. Update (Missing): Update for Microsoft Office 2013 (KB2825678) 32-Bit Edition (a5bf824c-7e5b-49bf-9d36-145c80221c74, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    15. Update (Missing): Update for Microsoft Outlook Social Connector 2013 (KB2965257) 32-Bit Edition (abab9d22-a65e-444e-8196-fcceba0aa7b3, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    16. Update (Missing): Update for Microsoft Lync 2013 (KB2889923) 32-Bit Edition (c35eb1f8-5ee7-4192-9ad0-1ae72315ac7e, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    17. Update (Missing): Update for Microsoft Excel 2013 (KB2965275) 32-Bit Edition (ca2c6772-706d-4a4a-a68d-78bbeaa3f56c, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    18. Update (Missing): Update for Microsoft Office 2013 (KB2880487) 32-Bit Edition (cf0b67db-b547-489f-a220-4592d68823b2, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    19. Update (Missing): Update for Microsoft PowerPoint 2013 (KB2965256) 32-Bit Edition (d1b0c046-1d5b-4f6b-afe7-68a863fb7fe2, 200) WUAHandler 15-4-2015 10:35:14 5068 (0x13CC)
    1. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3046306) (05411874-4d1f-44c4-8aad-dc84726878c9, 202) WUAHandler 15-4-2015 10:15:25 2932 (0x0B74)
    2. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3046482) (11ece05f-164c-4a7c-9f02-9379c61e2e23, 203) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
    3. Update (Missing): Cumulative Security Update for Internet Explorer 10 for Windows 7 for x64-based Systems (KB3038314) (2be48962-5314-484e-a7e8-16f4679dfea3, 202) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
    4. Update (Missing): Update for Windows 7 for x64-based Systems (KB2990214) (45f40ba9-5687-4415-85c7-68198f223f0f, 202) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
    5. Update (Missing): Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 7, Vista, Server 2008, Server 2008 R2 x64 (KB3037581) (6c8c0ac4-f40b-4e4b-aa83-1694fe0dbec2, 201) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
    6. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3045685) (ab4e2d11-37f2-4f64-b7e1-11e5ca25ce2a, 201) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
    7. Update (Missing): Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB3037574) (b9d30936-8e3b-4728-988e-78cc39aec684, 202) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
    8. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3042553) (cf426941-6ec7-41d2-99ce-710d4ddd543b, 203) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
    9. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3045999) (e1107158-3e97-4c23-801c-ede494f9df4a, 202) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
    10. Update (Missing): Security Update for Windows 7 for x64-based Systems (KB3046269) (ed46d995-c9fb-41e2-94df-146d97d47d07, 201) WUAHandler 15-4-2015 10:15:26 2932 (0x0B74)
    1. Update (Missing): Windows Malicious Software Removal Tool x64 - April 2015 (KB890830) (1de9e76a-4e0b-4ee3-b2b2-cccd08f4ff59, 200) WUAHandler 15-4-2015 10:12:18 2768 (0x0AD0)

    Hi Tim,
    Uninstalling
    KB3045999 works as a workaround like Wastashi said. We too have this problem.
    @Karen Hu: Startup repair didn't find anything here and this is probably because the system boots properly but only after a user logs in the "Error: userinit.exe - Application Error : The application was unable to start correctly (0xc0000018)"
    appears. Safe mode works however and after I disabled all the startup items and rebooted I could successfully logon once, but this could be coincidence because sometimes after a reboot you can login as pointed out by Tim NL. However a few seconds
    after I successfully logged in and saw the desktop, the pc rebooted spontaneously. Any idea what this could be causing? Virus scanner maybe?

  • Acrodist.exe application error

    I installed Adobe Acrobat 7.0 successfully. But when I convert a word file into PDF file, a error message pop-up as " AcroDist.exe application error --- the instruction at "0x0048C9e5" referenced memory at "0x0190eb6c", The memory could not be "read" Click on OK to terminate the program "
    If I click the program Acrobat Distiller, the same message box shows up.
    I tried to uninstalled and re-installed. Couldn't solve the problem.
    need help.

    This problem came up on my laptop today and I have found a solution, at least on mine. I was getting the exact same error as above (with different memory locations) when I tried to start Distiller (Acrobat 7.0). It had worked fine for years. On mine it was limited to my specific user account. I could run Distiller fine from the Administrator account. I also created a new standard user account to test with and it ran fine from that one as well. But it wouldn't run from my personal account. So I knew it was something with that specific account.
    To make a long story short, it ended up being a corrupt cache. You can find the cache in the following location:
    C:\Documents and Settings\[your user name]\Application Data\Adobe\Acrobat\Distiller 7\
    What I did was just rename the old cache folder and let distiller recreate it. That fixed it. Good luck.

  • Rwrun.exe - Application Error while running Concurrent Requests in R12(Win)

    Hi Gurus,
    I am getting the Rwrun.exe Application error, whenever i am running a concurrent request. The thing, that i feel is: Probably, The concurrent requests that has the output file associated with them are the one that are running into error.
    The following is the description of the error popup:
    rwrun.exe - Application Error
    The instruction at "0x663ed168" referenced memory at "0x00000004". The memory could not be "read".
    Click OK to terminate the program.
    Click CANCEL to debug the program.
    Due to this, am not able to submit any of the Reports.
    Details of My installation:
    Apps Version: Release 12
    Platform: Windows XP SP2
    Installed on: External HDD of 250GB
    Addon Patches after install: None.
    Has anybody faced this problem earlier?
    Please help me out gurus..
    Thanks in advance.
    Regards,
    Ajit

    Check the Event Viewer to see if there is more information about the error that can help.

  • RWRBE60.EXE - Application Error. The memory could not be written - URGENT !

    Hi,
    We are getting the error "RWRBE60.EXE - Application Error. The memory could not be written" in two of the 5 machines. That too, this error is encountered only some times and not always.
    Scenario: The report builder generates the .PDF file and places it in the network path. The report is called from the forms 6i. We are using the Report Builder - 6.0.8.20.1.
    This error is encountered in only 2 machines but not always.
    It's a critical release issue. Could any let us know the possible solution?
    Thanks,
    Uma

    Thanks. We can not re-install the report builder now. How do I check whether memory is sufficient or not?

  • Why do I get the Application Error jqsnotify.exe-Application Error. The memory could not be read?

    Why do I get this error message every time i opened up Firefox saying: jqsnotify.exe-Application Error and then at the bottom line it says: The instruction at "0x5ff3d322"referenced memory at " 0xe41203c3". The memory could not be "read". Click on OK to terminate the program.
    == This happened ==
    Every time Firefox opened
    == I recently renewed and installed the CA Security Suite and un-installed Firefox and re-installed it again.

    System restore did it for me........!!!! It's gone and I don't miss it one bit.....!!!! May be one of those untraceable tricks that hackers use to irritate people.....Some security programs can identify these things ,but the perps usually use bogus addresses to send them anyway...Cyber criminals SUCK....<u>That is right ,I said that....</u> and they should be jailed and fined and suspended from internet usage all over the globe....
    Reverend K.
    CEO,FOUNDER,Site Editor,
    http://WWW.CCCINTL.NET

  • RWRBE60.EXE - Application Error. The memory could not be "read" - URGENT !

    Hi,
    We are getting the error "RWRBE60.EXE - Application Error. The memory could not be written" in some of the machines. That too, this error is encountered only some times and not always.
    Scenario: The report builder generates a .RTF file and places it in the network path. The report is called from the forms 6i. We are using the Report Builder - 6.0.8.25.0.
    This error is encountered only in some machines but not always.
    It's a critical release issue. Could any let us know the possible solution?
    Thanks,
    Monica

    Thanks. We can not re-install the report builder now. How do I check whether memory is sufficient or not?

  • Why on close am I geting " firefox.exe -Application error - The memory could not be "written" "?

    Why on close am I geting " firefox.exe -Application error "The instruction at "0x00000000" reference menory at "0x00000000". The memory could not be "written" Click OK to terminate."?
    This is on Window XP
    A program White Smoke was loaded into this unit about 3 month ago and a popup to buy started appearing 1 week ago. I unistalled the program and i found virus that was removed.
    The unit will not allow a system restore also.

    You do not need to start Firefox to disable the Java Quick Starter, you can do that via the Java Control Panel (Control Panel > Java > Advanced)
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Maybe you are looking for

  • Problem in pricing regardinr business blueprint

    HI Gurus, i am new in sap sd field i just put my foot in this field. i got business blueprint for sap sd implementation i have folloing problem in pricing please help me out. <b>1</b>.Do you require the functionality to create user-defined indexes in

  • Flickering problem

    hi I have done some customization on Sales Order form. As we select customer and pressed tab key, control goes to assign a text control with some value. Oly this assigning process fired 6 events. 2 GotFocus 2 LostFocus 2 Validate evnts with ItemUID o

  • Question about changing a Snow Leopard Server network settings

    We have an Xserve running Mac OS X Server 10.6.8, the primary services running on it are afp, smb, dhcp, dns, jabber and the calendar sever. Right now we have a router connecting two networks together, 192.168.0.0/24 and 192.168.1.0/24. The Xserve ha

  • Can you share your keyboard and mouse when using S...

    can you share your keyboard and mouse when using Skype Screen share? I want to give a remote user access to a application on my computer.  Is this posisable with Skype? Can you share just one application on yourscreen and not the complete screen?

  • Grey smokey marks behind glass on 27" iMac

    Does anyone know what this is, what causes it, and if it is covered under the 1 year warranty? It is getting worse and it is extremely annoying for doing any kind of graphics or design work. http://imgur.com/a/oPM3m It's right in the middle/right of