Не могу создать Adobe ID

При создании Adobe ID, после нажатия "Создать" появляется сообщение "Невозможно запустить подписку на Adobe Photoshop CS5 Extended Subscription Edition.  Что мне делать чтобы начать работать в Photoshop CS5? Ответ можно направлять на [email protected]
Message was edited by: МихЕвгТим

Hi, We don't offer subscriptions to Photoshop CS5. Two new versions have come out since then, and you can subscribe to Photoshop CC.
Try this link here: http://www.adobe.com/products/photoshop.html

Similar Messages

  • I have not updated adobe muse (не могу обновить мьюз)

    I have not updated adobe muse, after updating the program is removed and is not installed (after the 43% error)
    у меня не обновился adobe muse, после обновлени программа удалилась и сейчас не устанавливается (после 43% загрузки возникает ошибка)
    Exit Code: 39
    Please see specific errors below for troubleshooting. For example,  ERROR: DW042 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 2 error(s)
    ERROR: Failed CreateAlias
    ERROR: DW042: ARP Entry couldn't be created for language : ru_RU

    ERROR INSTALLATION 39 ADOBE MUSE CC 2014.3

  • не могу запустить Photoshop, т.к пишет : невозможно запустить подписку на Adobe Photoshop cs5. Помог

    невозможно запустить подписку

    You have to provide system information and otehr details like what subscription plan you are on.
    Mylenium

  • Я зарегистрировалась и загрузила на мак Adobe Premiere Pro CS5.5 - а как запустить?

    Зарегистрировалась и скачала для мака Adobe Premiere Pro CS5.5 -  более новые версии мой аппарат не потянет. А что дальше делать, чтоб работать? Куда давить, чтобы поехало? Ничего не понимаю! И русского ничего найти не могу!!! Денег с меня не попросили - да я бы и заплатила, только бы оно работало! Есть ли русская техподдержка? Что мне сделать, чтоб начало работать? Никаких серийных номеров нету, и ничего не понятно!!!!!!!!
    Тут у вас всё для умных, а я красивая!!
    Может быть, кто-то поможет блондинке, а? Очень нужно!!!

    Hi Dimliana,
    If you are trying to locate the serial number for the product which you purchased, then please go through the link below.
    Find your serial number quickly
    Also let us know the exact issue which you are facing while using the product.
    Regards,
    Anand

  • Adobe Captivate Quiz Results Analyzer 7

    Мои Adobe Captivate Викторина Результаты Анализатор 7 дать мне ошибку
    Данные не присутствует на локальной файловой системе.
    Скачивая курса данных ...
    когда я пытаюсь создать отчет.
    Отчеты также идет на внутренний сервер только когда я опубликовать курс в формат HTML5 не в SWF (у меня есть домен учетной записи пользователя с корпоративной прокси, внутренний сервер, расположенный в локальной сети). Но в кнопках формат HTML5 интерактивными но невидимых.

    Hello,
    Welcome to Adobe Forums.
    Do you have 26 different projects ?
    Which version of Captivate are you using ?
    Do you have MAC or Windows ?
    Any Error message while generating results for those 5 courses ?
    Thanks,
    Vikram

  • Нужна помощь по Adobe DPS Single Edition

    Приветствую всех. Суть в том что я не могу разобраться с лицензией Single Edition адобовская поддержка толком ничего не объясняет.
    Может кто-то из рускоговорящих может мне втолковать что входит в пакет DPS Single Edition, что я смогу с его помощью сделать и самое интересное это прайс и покупка.
    DPS Se это лицензия только на 1 фолио? Только одно приложение под IOs или Android можно сделать чтоли?
    Сейчас пользуюсь лицензией CS6 Design & Web

    Добрый день,
    Вам уже ответили выше. Просто дополню немного. При подписке на Creative Cloud (полной подписке, а не на отдельные программные продукты) становится доступной возможность публикации неограниченного количества Single Edition приложений (это приложения, которые могут содержать только одно фолио) в AppStore.
    Казалось бы плюсы очевидны: неограниченное количество приложений, нет платы за скачивания из AppStore, не нужно ежегодно платить за платформу DPS, чтобы приложение было доступно для скачивания. Но есть один жирный минус, перевешивающий, на мой взгляд, все эти плюсы – такие приложения имеют высокую вероятность быть отвергнутыми Apple на ревью. Чтобы этого не случилось, такое приложение должно включать в себя большое количество интерактивных оверлеев, не должно быть похоже на книгу по своей структуре и т. п.  И даже в этом случае нет никакой гарантии. Добавим сюда то, что на сегодняшний день Single Edition – это только для iPad.
    Не знаю ваших целей и задач, но для меня, если пользоваться платформой Adobe DPS, реальным вариантом является только Professional. Правда есть еще альтернативные интересные платформы, более приемлемые по цене, но немного похуже, на мой взгляд, по функционалу.

  • Enterprise Adobe Cloud

    Is there any plan for an enterprise version of adobe cloud?

    http://www.adobe.com/au/products/creativecloud/buying-guide-membership.html
    Creative Cloud for organizations
    Later this year, Adobe will release Adobe Creative Cloud Team, a version of Creative Cloud membership specifically for organizations. Until then, Creative Cloud Team Ready gives companies immediate access to all the CS6 tools and more, plus it serves as an onramp to Creative Cloud Team when it's available.
    Volume licensing customers can take advantage of the Creative Cloud Team Ready offering through Adobe’s Transactional Licensing Program (TLP) which is based on a one-year term agreement and is available for purchase through any Adobe corporate resellers. Customers who choose this option will automatically be transitioned into Creative Cloud Team membership as soon as it becomes available later in 2012.

  • Error in starting Adobe Bridge in Photoshop CS2

    I've just installed Photoshop CS2, however upon opening Adobe Bridge this error message appears " The application has failed to start because libagluc28.dll was not found. Reinstalling to application may fix the problem"
    I have reinstalled and click repair but to no avail
    I followed Adobe Support Knowledgebase solution and run CMD and this appears:
    c:Documents and Settings/Jesus M Ferraris>
    then i entered the command
    cacls c:\windows\installer /T /E /C /G administrators:F
    but an error message appears - 'cacls' is not recognized as an internal or external command, operable program or bathc file
    I also entered the next command
    cacls "c:\documents and setting\all users" /Y /E /C /G administrators:F
    still the same error as above appears, Please help, have I miss something or was my procedure correct...
    P4, 512ram, WXP 80gHD

    Very useful.
    Good Luck.
    My
    Si
    tes

  • How can I update my old behance account into a new Adobe ID one?

    My original behance account used an email address that was not linked to my Adobe ID so I ended up creating a new account by accident when prompted by the "Use your Adobe ID below to log in to Behance from now on." Now I can't use my name and I can't access anything from my old account.

    Hi - we can definitely help! To have a private convo where we can give you your accont info, please write us a ticket here and someone will get back to you ASAP:
    Behance Support & Forum : Submit a request for assistance

  • Error Message: Need to purge Cache in Adobe Bridge CC (on PC)

    I tried purging using Adobe Bridge by going to Edit/Preferences/Cache then purging, but it becomes non responsive.  The error message said the problem files were at Users/(my user name)/AppData/Roaming/Adobe/BridgeCC/Cache.   There are 4 files in there that are taking up 124 GB!  Can I simply delete these files or will it corrupt my regular files?  I tried doing as some other forums suggested and hold the ALT key down when opening Bridge before purging, but no luck.

    Yes, you can delete the cache files manually,  Just be advised that Bridge will become very, very slow until it finishes rebuilding its caches.  Depending on your files, that can take a few minutes or several hours.
    A good way of doing it is at night, so you can do it before going to bed and let Bridge rebuild caches overnight.
    If you can, save the cache files before deleting them to an external drive, so that you'll have them as backup if something goes wrong.

  • Adobe Stock Photos Stuck in Trash and Photoshop CS2 won't run!

    Okay, I apparently did something stupid. I'm not even sure how this happened, but I realized that Adobe Stock Photos folder was sitting on my desktop (I'm using OS X 10.5.6). I don't know when this happened and I didn't think I needed it so I dragged it to the trash. NOW I cannot run any of my Adobe software (includes Photoshop CS2, Illustrator CS2 and GoLive CS2).
    I can see the folder sitting in my trash, but it won't let me drag it back out. So, just as a test, I tried dragging out the one other file (.jpg) and I can't get that one either. I know this isn't a Mac forum, but I'm desparate and cannot find anything to help me.
    Probably I am going to have to reinstall everything and (of course) I can't find my CDs!!! Please don't get angry if I'm asking the wrong question. I've done an internet search and I cannot find any solutions.
    Thanks, Anne

    Adobe stock photos does not even exist anymore.
    Have you tried deleting your trash? I have no Adobe stock Photos on my computer and everything works. try restarting the computer.

  • Adobe Photoshop CS2 posterization problem on vignette

    I am having a problem with posterization in my image. When I try to vignette my photo (with black) it starts to block up in areas, mostly in the darkest part of the gradient. It ends up not making a smooth transitional gradient and leaves a line where it blocks up. It shows up on the screen as well as on the print. I have a calibrated LaCie CRT 19" monitor, G5 and I am working from digital raw files from a Fuji S2 that are AdobeRGB and also film scans that have done the same thing. What can I do to prevent this? Is it something to do with my G5 or is it the software in Photoshop? If there is any info that left out to help solve the problem please let me know!
    G5   Mac OS X (10.4.5)  

    If it shows up on screen and in print, then issue is with the software.
    Adobe has forums. Might try there.
    best wishes
    David
    Remember to mark an response helpful or solved.
    It protects the integrity of the board.

  • Adobe Photoshop CS2

    Topic
    Photoshop CS2 and Nikon D200
    Chuck Dell - 09:20am Dec 19, 2005 Pacific
    Just purchased new Nikon D200. RAW Images will not open in Photoshop CS2. Receive Adobe Photoshop CS2 error message "Could not complete your request because of a program error." Images taken with this camera will open in Nikon Capture 4.4 and then can be transferred to CS2 But attempting to open RAW images directly with CS2 is futile.
    Images taken with Nikon D2h and Nikon D100 flow perfectly through CS2
    Only images taken with Nikon D200 will not open in CS2.
    Is this Nikon problem or an Adobe problem?
    Reply To This Discussion | Back to Topic List | Bookmark | Subscribe
    To start a NEW discussion click on the Back to Topic List link and select Add Topic.
    If you are in an archive forum please go up to the main topic list (archives are read only).
    Messages 2 messages. Displaying 1 through 2.
    First Previous Next Last Show All Messages
    Joseph liftik - 11:12am Dec 19, 05 PST (#1 of 2)
    Wait for Adobe update on ARC that will support D200.
    Post Reply | Bookmark
    Chuck Dell - 12:11pm Dec 19, 05 PST (#2 of 2)
    Excuse me, but what is ARC?
    And does anyone know when Adobe will release supporting update?
    Post Reply | Bookmark | Edit

    upon importing i had the option of selection importinf from a "PICT Resource..."
    this was the only option that allowed me to select my JPG images (digital caerma images, btw)
    when i select and clikc OK, a message that comes up that says "There are no PICT resources in this file"
    moreover, when i convert the JPG images to PICT images (via preview) i get the same message
    strange, since i've been able to copy and past my JPG files all along until now...

  • Adobe Photoshop CS2 has encountered a problem and needs to close.

    Just starting to get this error on open in CS2 after a few months of smooth sailing on a new system (below). CS2 now cannot open. It started occasionally and increased. Tried reinstalling. Tried deleting the PS config files and same error. Any suggestions?
    Here's a sysinfo paste of my system.
    Nick
    XP pro SP2
    Small Bus. Server network node
    Profile- Username.DOMAIN
    PHOTOSHOP
    Photoshop CS2 (upgrade from ver. 6)
    C:\Program Files\Adobe\Adobe Photoshop CS2\9.0
    MB - ASUS P5K-E
    Disk C: 819 GB Available, 931 GB Total, 819 GB Free
    Disk D: 96 GB Available, 232 GB Total, 96 GB Free
    Intel ICH8R/ICH9R SATA RAID Controller
    Physical Memory 2048 MB Total, 1149 MB Free
    Virtual Memory 4740 MB Total, 3900 MB Free
    PageFile Name \??\C:\pagefile.sys
    PageFile Size 800 MB
    PageFile Name \??\D:\pagefile.sys
    PageFile Size 2047 MB
    One Physical Processor / 2 Cores / 2 Logical Processors / 64 bits
    Intel Core2 Duo CPU E8400 @ 3.00GHz
    Video1: ATI Radeon HD 3800 Series
    Video2: ATI Radeon HD 2400 PRO
    Memory Capacity 2048 MBytes
    Slot 1
    Corsair
    CM2X1024-8500C5D
    1024 MBytes
    DDR2-800 (400 MHz) running 1066
    64 bits
    Voltage SSTL 1.8V
    Slot 3
    Corsair
    CM2X1024-8500C5D
    1024 MBytes
    DDR2-800 (400 MHz) running 1066
    64 bits
    Voltage SSTL 1.8V

    Just ran memtest and received no errors. This more or less clears the hardware. I have no idea how to proceed. Does adobe offer any direct support for this sort of problem?

  • Error 400 when trying to sign-in to Adobe Photoshop 9 [was:Error]

    Getting an Error 400 when trying to sign-in to Adobe Photoshop 9.  What is the problem?

    http://barbarabrundage.com/2013/09/16/pse-8-9-10-cant-sign-in-error-404/
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Maybe you are looking for

  • My Ipod touch does not want to power on, has been on the computer for about two hours. no sign of life

    Is there a reset button or procedure on the Ipod 8GB touch. My son was playing a recently downloaded free game (Need for Speed) when it Quit working. i have had it on the USB cable for about two hours now and it still does not want to turn on. I had

  • Can't add any file

    Hello. i can't add any file to my itunes.when i wanted add a music,folder or file to my library,itunes crashed And i get the error message "iTunes has stopped working" and the only option I have is to close the program. I looked around the Apple supp

  • Install APEX to work on existing Oracle 10g R1 database

    I want to use APEX on an existing Oracle 10g R1 database. If I install it normally with the program downloaded from your site, it installs its own database that you use. How can I set / install it to use the existing database instead of its own datab

  • Startx shows twm but is frozen

    I thought I'd come here before my tinkering just makes things worse (which I'm afraid I may have already done:|) When I run "starx" twm loads, but it is totally frozen.  Mouse won't move, ctrl-shift-backspace doesn't exit, alt-Fkey doesn't open a new

  • Developer Mode Exception encountered for item.

    Hi, After running the page I am getting following error , 1. Developer Mode Exception encountered in item CitizenId Error: The item CitizenId has a maximum length (0) which is not equal to that of the corresponding VO attribute, CitizenId length (20)