Nedd to tick the GR based IV in an open PO

Hi all,
I need to tick the GR based IV tab for an open PO. I have raised a PO for 100 qty and received 50 qty, Later i found the tab is not ticked and its in display mode. I found the root cause for it in vendor master - Purchasing data view. There i didnt tick the GR-based IV tab. Then i ticked it. But still when i checked the PO it has not enabled. What may be the reason?
Thanks in advance.
Regards,
Raj.

Hi Raj,,
Once the GR has been made the check box will be in display mode only. You cnnot activate.
As you told that u have created the PO of 100 qty and receive 50 qty. so you can close the line item and copy in the same PO and generate new line item for another 50qty.
regards

Similar Messages

The GR-based IV is tick marked & it is in grey Field,Kindly help me how to

Dear All
While creating Framework PO,The GR-based IV is tick marked & it is in grey Field,Kindly help me how to remove the tick mark.
Correction did in Vendor master.Kindly let me know whatelse i have to do.

Hi!
If u are using doc. type FO, then see the field slection for that type.
SPRO - MM- purchasing - p.o - define screen lay out at doc. level - slect FOF - details.
Here, you can change GR based invoice verification field from display to optional entry.
Regards
Gopi Chand

Why are my prints shrinking when exporting files from NEF to Tiff despite not ticking the re-size box!

When I export/convert my Nikon D7000 based raw files to Tiff files using Lightroom, in preparation for printing, the document size shrinks but the file size increases(see top image below)! This is despite not ticking the 'Resize to Fit' box on the export pop up.I know the file size will increase going from a raw to a Tiff file but I don't understand why this happens when the print size shrinks. This is even more puzzling if I export the same file as a raw file (+its related .xmp file) to another folder then save the file in Elements 9 as a Tiff folder since the size stays as it shoiuld be (see middle image below) I think it must be something to do with the way I am exporting directly to a Tiff format as if I export it as a .dng it still retains its size (see bottom image)
Tiff image exported from Lightroom as a Tiff file then just viewed in Elements 9
Raw file exported from Lightroom as a NEF raw file (with XMP) file then just saved as a Tiff in Elements 9
NEF raw image converted to .dng file through Lightroom & viewed in CS2

Sorry, I think I've obviously confused the issue by not comparing like with like so here are two versions of the exactly the same image, one a Tiff and one a dng. Both images are 6016 x 4016 pixels, 300 pixels per cm and were simply exported from Lightroom. If I were to simply print them without resizing, one image would be significantly larger than the other. Why does this happen is what I really want to know? If I was to resize the smaller version of the image to be the same size as the larger one, would there be any loss of detail in the print? I would expect there to be as CS2 would create data to fill in the gaps resulting in a file that was 859.2M in size.

Registering the Web based application as a Partner Application

Good day
I went through the suggested documentation of registering a
web based application as a partner application of the SSO Login Server.
I installed the SSOSDK.JAR and went through the demo application (JSP Demo)
which consists of the following programs :
papp.jsp
ssoinclude.jsp
ssoEnablerJspBean
SSOEnablerBean
SSOSignon
As per the technical documentation,I register this demo application as a
partner application.
1 - The source code of the papp.jsp checks for the existence of the user
through method of ssoEnablerJspBean [getSSOUserInfo(request, response)] which
calls method of SSOEnablerBean [getSSOUserInfo (request, response) and this
method calls getUserInfo(p_request) of SSOEnablerBean (the same program) to
check the existence of the application cookie.
2 - If it doesn't exit , it redirect it to the SSO Login page for user
authentication.Once the user is authenticated, a SSO login cookie is created on
the client's browser and redirects back to the SSOSignOn.
3 - The SSOSignOn program creates the application cookie and redirects back to
the entry point of the demo application which is papp.jsp.
My Questions are as follows :
1 - Instead of creating a session object within my web based application to hold some
information used between the different pages, can I define them in the
application cookie? kindly advise? Is there any limitation for the length of
the application cookie? If yes, what will be the risk?
2 - The SSOSignOn program is calling a method in the SSOEnablerBean
[setPartnerAppCookie(response, request). Within this method , it is retrieving
the parameters values of the request object as :
request.getParameterValues("urlc")[0];
What is the role of this [urlc]? Is it hard coded? Can I change it?
3 - In order to ensure that I am still dealing with the same user, shall I put
the above security check procedure on each page of my weeb based application? Kindly advise?
Thanks in advance for your prompt feedback
regards

Dear Paul
I think there is a misunderstanding regarding the last correspondence.
I am talking about the customized home page of the PORTAL and not the home page of my web based application (JSP) .So in this case, Am I able to use the customized home page which contains a login portlet instead of the default Login page of the SSO Login Server.Kindly advise!!!
On the other hand, I am facing a problem during the surfing of the web based application.
The web based application consists mainly of two packages :
Package I : Bank.counter which contains a set of jsp pages.
JSP_HOME_COUNTER (MAIN PAGE WHICH CONTAINS 2 FRAMES)
JSP_LEFT_FRAME_COUNTER
JSP_MAIN_FRAME_COUNTER
JSP_MAIN_FRAME_COUNTER_DETAIL
Package II : Bank.portfolio which contains a set of jsp pages.
JSP_HOME_PORTFOLIO (MAIN PAGE WHICH CONTAINS 2 FRAMES)
JSP_LEFT_FRAME_PORTFOLIO
JSP_MAIN_FRAME_PORTFOLIO
Please note that the SSO classes are residing under the first package.
As agreed on in the third question, I am including in each page of my web based application, a security check procedure as follows :
<%@ include file="ssoinclude.jsp" %>
<%
if(usrInfo == null)
response.getWriter().println("<center>User information not found</center>");
else
my jsp code.......
%>
Please note that all the jsp page of the portfolio package are pointing to the SSO classes as follows :
<%@ include file="../counter/ssoinclude.jsp" %>
<%
if(usrInfo == null)
response.getWriter().println("<center>User information not found</center>");
else
my jsp code.......
%>
Once I invoke the JSP_HOME_COUNTER , it will render the JSP_LEFT_FRAME_COUNTER page and
JSP_MAIN_FRAME_COUNTER page which invokes the SSO Login page. Once the user has been authenticate, the result of the JSP_MAIN_FRAME_COUNTER is rendered successfully. The result contains an hyperlink to the
JSP_MAIN_FRAME_COUNTER_DETAIL page. As the user has been authenticated , this page is rendering automatically the result without displaying the SSO Login page. (Perfect as of now!!).
Once I invoke the JSP_HOME_PORTFOLIO from the JSP_HOME_COUNTER, it runs the security procedure without any rendering of the SSO Login page (fine!!) but redirects me back to JSP_HOME_COUNTER instead of rendering the result of the JSP_HOME_PORTFOLIO.
please note that the m_requestUrl variable in the SSOEnablerJSPBean class has been assigned the folowing value : JSP_HOME_COUNTER
Kindly advise .

How do I access the web-based utility

I just purchased a wireless router...WRT300N. I want to access the "web-based utility" in order to update the firmware.
How do I access the web-based utility...help!
Thanks.

Access the router’s web-based setup page.
For instructions, click here.
Linksys Easy Answer 4030, applies to WRT300N
Upgrading the Linksys Router's Firmware
Hope this helps,
Lilla
Westell 6100 modem/router; Linksys WRT54GL v1.1 router firmware 4.30.9; Linksys WPC54G v2 Notebook Card; CenturyTel DSL using PPPoE

I get this message when trying to past simple text into an e-mail document. The Web-Based Email plugin has crashed. I have run out of options...please help.

The Web-Based Email plugin has crashed. I get this message when trying to paste simple text into an email document. I have updated plugins and have run out of options. If I use another browser I have no problem. Please advise.

UPDATE
Compiling from command line I found out that the class definition for oracle.oats.scripting.modules.basic.api.IteratingVUserScript is missing. Do you know what .jar file contains this class?
Thanks.
Fede.

How to create the web based report without enterprise portal?

Hi experts,
We don't have enterprise portal but I like to create the web based version of the existing Bex reports and which option is the best to distribute this web based report using information broadcasting?
Can I use report designer for this?
Thanks in advance.
Sharat.

Hi Sharat
In BI 7.0 the Queries which u devoleped can be broad casted by using two ways .
1. Enterprise portal
2.Web Application Designer(WAD)
So you can choose any of the option, For the Option 1 you should have seperate server for the EP or else For option 2 you have to make some setting in the BI system to enable the Web reports..
Reagrds
Satish

Oracle SQL Developer error - "The file-based source procedure Name is not present in the database."

I recently started working on the Oracle SQL developer. I have 'select' privileges on the QA schema and when tried to execute proc in QA. It is giving the error as 'The file-based source <procedure Name> is not present in the database. Was it compiled?'
instead 'you do not have sufficient privileges to execute this procedure'. Did research on internet but with no luck.What configuration changes needed to be done to make it work.Guide me.

Sounds like you do not have the correct privileges. What should have been granted to you by the QA user, or some other user with appropriate privileges, is...
grant EXECUTE on "QA"."<PROCEDURE_OF_INTEREST>" to "<YOUR_USERID>" ;
Note that a grant of execute on a procedure has nothing to do with grants of select on some or all of QA's tables and views.
So, as Vadim suggests, from your connection node in SQL Developer's Connections view, if you expand the Other Users node, then expand QA and look in the Procedures node, do you see the procedure of interest? If not, you cannot expect to be able to execute it from your userid's connection. And even if you do see it, you may have some other privilege that permits viewing but not executing, like...
The role SELECT_CATALOG_ROLE
The system privilege SELECT ANY DICTIONARY
And even if you do not see it there, then having certain other privileges granted to you could permit executing it in general, like...
The role EXECUTE_CATALOG_ROLE
The system privilege EXECUTE ANY PROCEDURE
Also, note that the 3.0 release is a bit dated nowadays. Upgrading to 4.0.3 production or even the 4.1 EA2 (early adopter) release will, in general, give you a better experience.
Best wishes,
Gary

Hi All, I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain" I run a test print and its se

Hi All,
I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"
I run a test print and its seamless. I reboot the Mini1 and run test print again and its good.
Now in Mini2 I did the same installation on shared printer but it is asking for user credential again and again, there is a check mark in "remember in keychain but still gives a notice that "requires authentication" I put the admin creadentials same with Mini1 then it prints.
every time I print on Mini2 its always asking for a user & password before Printing. How can we fix it.
I tried
- lpd printing = "authentication required"
- reset printer settings ang re-install printer = "authentication required"
- replace sharename in windows7, reinstall printer in Mini2 = "authentication required"
This stuff never happened to Mini1.

Hi All,
I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"
I run a test print and its seamless. I reboot the Mini1 and run test print again and its good.
Now in Mini2 I did the same installation on shared printer but it is asking for user credential again and again, there is a check mark in "remember in keychain but still gives a notice that "requires authentication" I put the admin creadentials same with Mini1 then it prints.
every time I print on Mini2 its always asking for a user & password before Printing. How can we fix it.
I tried
- lpd printing = "authentication required"
- reset printer settings ang re-install printer = "authentication required"
- replace sharename in windows7, reinstall printer in Mini2 = "authentication required"
This stuff never happened to Mini1.

How to suppress the report based on outer dimension in nested report

Hi Experts,
We have a report with nesting of two dimensions in rows. They are Program dimension and Account Dimension.
We need to supress the report based on the program dimension members. i.e whenever there are no values against all the accounts for a particular program that particular program should get supressed.
In the screenshot attached I am looking to supress the rows 37,38 and 39 as the data against this program is empty.
However I dont want to supress the rows 31 and 33 as there is a capital data against this program in row number 32. So we have to supress the rows based on absence of data at program level.
We are using SP14 on BPC 10.
I remember that such functionality could be acheived in BPC 7.5 by flagging the required dimension to have suppress in Expansion Range. So I guess, similar functionality would be there in BPC 10 as well.
I have evaluated the option of VBA macro to hide the required rows, but was wondering if we can achieve the same using EPM functionality as we used to do in BPC7.5.
Thanks in advance for your suggestions!!
Regards,
Shiva

Hi Shiva,
First you have to check the option Keep Blocks:
This option will show the whole block even if only one line contain some not zero/empty cells in the row.
Second, when you select option Filter on All Columns/Rows you have to select OR as operator between columns:
In this case the test for >0 (or for <0) will be applied to each column and the result will be OR'ed with other columns. True will be even if one column contains not zero and not empty cell.
You logic to check individual column require to hardcode the members - not good!
Vadim
P.S. If you select AND for Filter on All Columns/Rows - then only lines with all cells with non zero / non empty will be shown as in your example!

I'm always losing all of my music and get a lot of apps that i don't need when i plug my i4 into my mac. I only ticked the box 'Manually manage music and videos' but it's always syncing itself. How can i prevent this? I don't want to put bacPlease Help!!!

I'm always losing all of my music and get a lot of apps that i don't need when i plug my i4 into my mac. I only ticked the box 'Manually manage music and videos' but it's always syncing itself. How can i prevent this? I don't want to put back 1500 any more because of this. Please Help!!!

I'm always losing all of my music and get a lot of apps that i don't need when i plug my i4 into my mac. I only ticked the box 'Manually manage music and videos' but it's always syncing itself. How can i prevent this? I don't want to put back 1500 any more because of this. Please Help!!!

Is there a way of not displaying entries in the Blog based on today's date

Hi,
I'm using the Blog layout in iWeb for a calendar.
Somewhere in this discussion forum, I found how to sort the entries by increasing date (many thanks for that).
The question I have: Is there a way of not displaying entries in the Blog overview of which the date is in the past ?
Thanks

Hi Cyclosaurus,
the link you refer to (http://test.cyclosaurus.com/Site/Blog/Blog.html) seems to be broken. I can't see the script.
Can you sent me a script to automatically hide events from the past (based on today's system date) ?
please note that I use following script to reverse the summary (which i found in the discussion forum):
<script type='text/javascript'>
function reverseSummary() {
blogSummaryWidget = parent.document.getElementsByClassName('com-apple-iweb-widget-blogSummary flowDefining')[0].widget;
blogEntries = blogSummaryWidget.blogFeed.itemCount();
blogSummaryWidgetID = blogSummaryWidget.instanceID;
blogSummaryContentDiv = parent.document.getElementById(blogSummaryWidgetID + '-summary-content');
if (blogSummaryContentDiv.childNodes.length > 0) {
for (be=1; be<blogEntries; ++be) {
bi = (blogEntries - 1) - be;
blogSeparator = parent.document.getElementById(blogSummaryWidgetID + ('-separator-template$' + bi));
blogSummaryContentDiv.appendChild(blogSeparator);
blogEntry = parent.document.getElementById(blogSummaryWidgetID + ('-item$' + bi));
blogSummaryContentDiv.appendChild(blogEntry);
clearInterval(chkSummary);
chkSummary = setInterval('reverseSummary()', 1000);
</script>

How to setup the security based on roles in Organization.

Hi,
How to setup the security based on roles in Organization.
For example:Few users are Manager and a few user are Non Manager .Manager should have access to all work data including Non Manager and Non Manager should access based role.How to setup this? How OBI server identify the user role?
kindly let me know.
Regards.,
CHR

Hi,
You need to have Back End support to achieve this. In Back End you need to create two groups . You need to know what joins has to be made for which group (which is more important) and also make session variable for the userrole (with SQL supporting it). In the BMM layer, we need to put the security join conditions in the 'where clause'.
And make a common report. User loggin in with the respective userid will have userrole and joins assigned in the Back end. And they will be viewing the report according to their access.
Hope this will solve your problem.
Regards
MuRam

How to implement Check box in the Rtf based on the value from XML datafield

Hello All ,
It would be great if any one can help me in implementing check box in the rtf based on the data filed value from the XML data.
I need to get in the out put checked boxes like what we say Radio button Yes or No ( If Yes it should be marked ).
If any one worked on this please help us...
Thanks in Advance...

Did you check the user guide,
we have a section over there :)
http://blogs.oracle.com/xmlpublisher/2007/05/22

Why does Googlemail not appear on the Start Page every time instead of going all through "more" and " even more etc, plus having to sign in even though I have ticked the Stay signed in box?

There is no consistency when one gets the Mozilla Firefox Start page.There is a line as follows :
Web Images Maps News Shopping Books more
To get Gmail one has to click on "more" which gets one a dropdown menu which ends in "even more" Clicking on this takes one to a page headed "Even More Google Products", including (Hurrah!) M Gmail.
Click on this and one gets the page where one signs in, even though I have ticked the box entitled " Stay signed in" and at last ones's e-mail page turns up. Very occasionally, instead of Books or Shopping on the Start Page "Gmail" is there which when clicked on takes one directly to one's e-mail.It seems a hell of a rigmarole just to get one's e-mail!

You can set Firefox home page to one of your choosing, see [[how to set the home page]].
If the keep me signed in option is not working, you may have a malformed cookie. Try deleting Google/Gmail cookies, for details on how to do that see [[deleting cookies]].

Nedd to tick the GR based IV in an open PO

Similar Messages

Maybe you are looking for