Need 50AX60 service manual and/or file number

I am trying to repair a old school Toshiba 50AX60 rear projection TV. I need the file number for the service manual so I can search for a free download online. Can anyone help me?
THX
Mike

The manual was very helpful. I used the procedure I found there. When I got to step 5 where you check the PSU fans, I see that they try to spin up when the power button is pushed. They don't even get a full rotation before they stop. I guess this means that the PSU has some problems. Up until step 5 the voltages where correct, so I guess just checking one or two voltages does not tell the full story.
I noticed that the pinouts posted here
http://www.outofspec.com/frankenmac/wire.shtml
did not match the manual. They are the mirror image (up/down) from the manual. The manual matched my pinouts. Also where it says 28v on the frankenmac diagram, it is 25v in the manual.
New PSU units cost $340+, from what I see. The computer is not worth much more than that. I think I will put my money towards a new Core I7 Mac tower, when they come out. I should be able to move the hard drive over. Hopefully the new towers will handle the old hard drives. In the mean time my gaming PC will have to do double duty.

Similar Messages

Do we need to format data and log files with 64k cluster size for sql server 2012?

Do we need to format data and log files with 64k cluster size for sql server 2012?
Does this best practice still applies to sql server 2012 & 2014?

Yes. The extent size of SQL Server data files, and the max log block size have not changed with the new versions, so the guidance should remain the same.
Microsoft SQL Server Storage Engine PM

Thumbnails from a D800 showing as a NEF and nikon file number, no picture

thumbnails only showing as a NEF and nikon file number no picture D800 camera

What version Photoshop and Bridge and what type and version OS?
Where do you expect to see the thumbnails and where are they not showing up? In Bridge or in the Mac Finder/Windows Explorer?
If you can, supply a screen shot.

I am on a trial version of InDesign in Creative Cloud and before I purchase need to know why and the files cannot be opened by others using CS6. Isn't Cloud compatible with CS6 design software?

I am on a trial version of InDesign in Creative Cloud and before I purchase need to know why and the files cannot be opened by others using CS6. Isn't Cloud compatible with CS6 design software?

Industry standard files such as JPEG are compatible with many brands/versions of programs
Proprietary files such as those created by InDesign are often not backwards compatible, due to new features in newer program versions
This is not unique to Adobe... MS Word DOCX files are not backwards compatible with earlier versions of MS Word

I use a PC - I need to open ai and eps files - what adobe program do I need to purchase?

I use a PC - I need to open ai and eps files - what adobe program do I need to purchase?

You need Illustrator to open .ai files. That is, if you want to edit them.
If you just need to place them, then tell us what you want to do with the files.

To fetch details of services deployed and their version number

We have an EM environment where in we have deployed composite applications. We have several partitions running with number of services deployed in them. We want to fetch the details of the services deployed and their versions in each partition from a file if it stored in a file or from a table if it is stored in table. We are not sure if these details are stored in a file or table. Instead of fetching manually from console everytime, We want it be retrieved in a file or table which will help us control versions of services deployed. Please help regarding this.

Using ant -f ant-sca-mgmt.xml listCompositesInPartition, We can get the details of the composites deployed in a particular partition.

VirtualDisk on Windows Server 2012 R2 Storage Pool stuck in "Warning: In Service" state and all file transfers to and from is awfully slow

Greetings,
I'm having some trouble with my Windows Storage Pool and my VirtualDisk running on a Windows Server 2012 R2 installation. It consists of 8x Western Digital RE-4 2TB drives + 2x Western Digital Black Edition 2TB drives and have been configured in a single-disk
parity setup and the virtual disk is running fixed provisioning (max size) and is formatted with ReFS.
It's been running solid for months besides some awful write-speeds at times, it seems like the write performance running ReFS compared to NTFS is not that good.
I was recommended to add SSD's for journalling in order to boost write-performance. Sadly I seemed to screw up this part, you need to due this through PowerShell and it needs to be done before creating the virtualdisk. I managed to add my SSD to the Storage
Pool and then remove it.
This seem to have caused some awkward issues, I'm not quite sure of why as the virtualdisk is "fixed" so adding the SSD to the Storage Pool shouldn't really do anything, right? But after I did this my virtual disk have been stuck in "Warning:
In Service" and it seems to be stuck? It's been 4-5 days and it's still the same and the performance is currently horrible. Moving 40GB of data off the virtual disk took me about 20 hours or so. Launching files under 1mb of the virtual disk takes several
minutes etc.. It's pretty much useless.
The GUI is not providing any useful information about what's going on. What does "Warning: In Service" actually imply? How am I supposed to know how long this is supposed to take? Running Get-Virtualdisk in PowerShell does not provide any useful
information either. I did try to do a repair through the Server Manager GUI but it goes to about 21% within 2-3 hours but drops back down to 10%. I have had the repair running for days but it wont go past 21% without dropping back down again.
Running repair through PowerShell yields the same results, but if I detach the virtual disk and then try to repair through PowerShell (the GUI wont let me do repair on detached virtual disks) it will just run for a split second and then close.
After doing some "Googeling" I've seen people mentioning that the repair is not able to finish unless I have at least the same amount of free space in the Storage Pool as the largest drive in my Storage Pool is housing so I added a 4TB drive as
due to me running fixed provisioning I had used all the space in the pool but the repair is still not able to go past 21%.
As am running "fixed provisioning" I guess adding a extra drive to the pool doesn't do much difference as it's not available for the virtual disk? So I went ahead and deleted 3 TB of data on the virtual disk so now I've got about 4 TB free space
on the virtual disk so there should be plenty of room for Windows Server 2012 R2 to re-build the parity or whatever it's trying to do but it's still the same, the repair wont move past 21% and the virtual disk is still stuck in "Warning: In Service"
mode and the performance keeps being horrible so taking a backup will take forever at these speeds...
Am I missing something here? All the drives in the pool is working fine. I have verified using various bootable tools so why is this happening and what can I do to get the virtual disk running at full state again? Why doesn't the GUI prompt you with any
kind of usable information?
Best regards, Thomas Andre

Hi,
Please run chkdsk /f /r command on the virtual disk to have a try. In the meantime, run the following commands in PowerShell to share the output.
get-virtualdisk -friendlyname <name> | get-physicaldisk | fl
get-virtualdisk -friendlyname <name> |fl
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Need MDD service manual

Like many people on this forum, I have a MDD G4 that wont start. Reading the various posts has been helpful, but I still have the problem.
My G4 had been working perfectly, until it hung up while running CivIII. Since that game takes over the monitor (can't tab out), I could not force quit. I turned off the G4 using the front switch. From that point on the G4 would not start. I get the single light flash when the power button is pushed but only the first time after the computer has been plugged to power.
I have tried resetting the PMU and replacing the battery. The computer will not start even with the battery removed. Resetting the PRAM can't be done since the computer won't power up.
I see some voltages coming from the PSU (5V and 25V) but I don't know the correct pattern, hence the need for the service manual. I did note that the voltages dissappear after the front switch is pushed. I suspect either the PSU or the front switch, but need to know how to test them.
I have tried to google the MDD manuals, but Apple seems to have wiped them from the web (bad Apple). I see that some people on this forum imply that they have this information. Can I get some help?

The manual was very helpful. I used the procedure I found there. When I got to step 5 where you check the PSU fans, I see that they try to spin up when the power button is pushed. They don't even get a full rotation before they stop. I guess this means that the PSU has some problems. Up until step 5 the voltages where correct, so I guess just checking one or two voltages does not tell the full story.
I noticed that the pinouts posted here
http://www.outofspec.com/frankenmac/wire.shtml
did not match the manual. They are the mirror image (up/down) from the manual. The manual matched my pinouts. Also where it says 28v on the frankenmac diagram, it is 25v in the manual.
New PSU units cost $340+, from what I see. The computer is not worth much more than that. I think I will put my money towards a new Core I7 Mac tower, when they come out. I should be able to move the hard drive over. Hopefully the new towers will handle the old hard drives. In the mean time my gaming PC will have to do double duty.

Idoc Number and EDI file number...

Hi gurus
How do we know EDI file number from the IDoc number ?
I have Idoc numbers with me but is there any way that i can know that the EDI file number associated with that ?
Thanks
Meenakshi Nakshatrula

Hi,
Go to transaction WE02 or WE05 enter Idoc number and choose execute. When Idoc data is displayed double click on Control Record in left pane. Choose Details tab. Interchangable file under References.
You can also refer the entries in table EDIDC.
Reference to interchange file:
This field contains the reference number of the interchange file in which the EDI message was transmitted.
Regards,
Srilatha.

Need to Edit Photoshop and Illustrator Files

We need to be able to make simple edits to Photoshop and Illustrator files -- e.g. fixing typos. I am hesitant to buy a copy of both programs at over $1000 when we will be using 0.01% of the program!
Desire is to open, make edit, save in original format.
Anyone know a way?

No. Sorry, you will have to take this bitter pill. While there are other apps like Paintshop Pro that open PSD files using the legacy version of the format up to PS7, you will loose information as they may not support all layer styles, smart objects, layer groups, 32bit/16bit PSDs and correct color profile handling. in so many words: you will burden yourself with more work instead of making things easier. and for illustrator don't even ask - the format is proprietary ever since v9, so nobody outside Adobe can replicate it.
Mylenium

Join a service call and one serial number?

In admin web tools
Can join a service call and one customer equipment card (serial number) ?

The company sells machines for industry.
Every machine and component has a serial number and u201Ccustomer equipment cardu201D in SBO.
Usually, If the customer has a problem call to company.
1.- SBO user get the u201Ccall serveru201D
2.- SBO user support join the u201Ccall serveru201D and u201Ccustomer equipment cardu201D
3.- SBO user go to call server create a Delivery (works and equipment)
Unfortunately the technical support, works in customer company and usually canu2019t entry to SBO in several days.
We like use the u201Cweb toolsu201D, the technical support uses the web and can see the u201Ccall serveru201D, the Customer and marketing documents.
But canu2019t assign a u201Ccustomer equipment cardu201D to u201Ccall serveru201D and synchronize to SAP and create a Delivery by WEB
Can you proposal a new work flow by web?
Muchas gracias.

Re: Qosmio G50-10I - I need the service manual

Hi,
Can tell me someone who I can find a service manual
(+you now how to unscrew the notbook+
+i dont care about the Warranty+ )
for my Qosmio g50-10i
Thanks

Hello Athan
I understand very well what you want to do but I cannot understand why you don't care about warranty.
Qosmio G50 is very expensive notebook and you should take care about warranty. The repair is also expensive and maybe you should think about it. Anyway, you can do what you want. It is your money.
Service manuals is not public document and you will not be able to get it or fins somewhere on the net. Maybe you will find some instructions given by some enthusiasts but official Toshiba documents are for authorized services only.
On Toshiba page you can find parts that can be used/upgraded by notebook owner. RAM or HDD exchange has nothing to do with warranty and you can exchange or upgrade it alone.
Notebook keyboard doesnt belong to this category and such parts can be exchanged or ordered by authorized service.
Of course you can find some independent dealer and found and order keyboard on your own.
So, following Toshiba (and any other notebook manufacturer) policy keyboard replacement should be done by authorized service.
I don't know what you want to do exactly but if you want to change just plastic cover on each key you can try to do this. It can be risky because under the each key cover is small and sensible mechanism. If you do this gently you will maybe have luck but the plastic can also be broken.
Mann I don't know what to say. If you have money don't risk with it. Contact nearest authorized service and let them order new keyboard for you. Keyboard exchange can be done in 10 min only.
Be cool, speak with them and I am sure they will help you.

M6-1068ca Service Manual and CPU upgrade

I have an HP Pavilion M6-1068ca and am trying to upgrade some components of it.
I can't find a working link to the hardware/service manual of the laptop. Each link I find through google takes me to a dead page.
Also trying to determine if I can upgrade my CPU to an A10-4750m.
This question was solved.
View Solution.

Hi,
Have you tried the following manual ?
http://h10032.www1.hp.com/ctg/Manual/c03328663.pdf
and more manuals
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=5275631&
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Need to create PDF and Spreadsheet file from RDF file when user passes the parameters

Hi Everyone,
I am beginner as report developer ,i came across one issue when the requirement came from the client regarding generating EXCEL FILE and PDF FILE from same RDF file .
I was able to generate the PDF file but i when i tried to create excel file it does not include the margin in it, also the cell border are not seen( file comes with data but with no CELL borders), I have also attached screenshot for reference .
View image: problem
or
http://i43.tinypic.com/2mq017k.jpg
Software Used :
Oracle reports Developer : 11g 1.2.3.0
Thanks ,
Harshil

Dear Olga12,
Thanks a lot for your quick reply.
When i suggested the solution to my client for creating two separate templates attached to same data definition , they declined and argued that we cant create 2 separate templates for all reports( more than 200 reports).
Is there any way to create the PDF/EXCEL from same RDF other than creating two separate templates ?
Thanks ,
Harshil

Need to convert video and audio files in high quality

Hi to all, i need to convert file types such as .AVI, .WMV and .MOV and keep the high quality, but i dont have or know any software to do this, are there any good options out there?
I don't really want to use a trial version, thanks.

I've used FFMpegX for my conversions. I've never looked at them on a large screen to see how well the video quality held on, but they look fine on my MacBook.
http://www.ffmpegx.com/
~Lyssa

Need 50AX60 service manual and/or file number

Similar Messages

Maybe you are looking for