Need 8 seconds to send 1 sms(short message)

please i need your help,
this is my video, it took 8 seconds to send 1 sms (short message)
http://www.youtube.com/watch?v=TYeK7dP1fzw
why my z10 very slow respond when i try to send sms (short message)
its not happen to whatapp or bbm, just happen when i send a sms (short message)
any idea to improve the speed for send 1 sms (short message) ?

I have the same problem. my screen freezes if i want to leave sms as well. have you received any response from blackberry?

Similar Messages

  • How to send SMS ( Short Message Service ) from java code

    Hi
    How to send SMS ( Short Message Service ) from java code.
    Thanks
    Gaurav

    Do you need to receive SMS? If you need to receive SMS, you will need to host your own GSM device or modem so that people can send you SMS.
    If not, you can just use internet SMS gateways like clickatell as mentioned above will do the work, and post to them by HTTP, XML or email. The cost is about 6-8 cents per SMS. There are cheaper services, but not always reliable. If you need to host your own GSM device, you can use software like http://www.kannel.org (GPL Open Source) or http://www.visualgsm.com. Alternatively, you may obtain a shortcode from your Telco - but these come with monthly subscription of maybe one or two hundreds.
    Regards,
    Joshua
    <SMS Gateway>@Expert

  • HT5395 Send as SMS on Messages for OSX

    Is there any way to 'Send as SMS' from messages for Mac as there is on iPhone? I have a number of contacts that messages detects as iMessage but is unable to send. A popup advises that the recipient is not set up for iMessage, but no option is given to send as an SMS, resulting is me having to do it from my phone.

    On your iPhone under Settings turn on Send as SMS (when iMessage isn't available).
    The following is from the Messages Help file:
    To make and receive SMS and MMS messages on your Mac, you need an iPhone with iOS 8 that’s signed into iMessage with the same Apple ID. To send an SMS message, enter a contact or a person’s phone number, enter your text, then press Return. Your SMS and MMS messages appear on your Mac automatically.

  • Sending an SMS test message from MacBook Pro

    Unfortunately, I have messed around with the settings on my MacBook Pro and now I cannot send a text message via my computer to someone who doesn't have an iPhone - which I could until I inadvertently changed some settings. When I attempt to send an SMS text message to a non-iPhone I receive a message that says: " ....is not registered with iMessage". Any and all help would be greatly appreciated. Thank you.

    Can the computer receive them?
    Check you setup
    Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
    It appears the Mac is not linked to the phone

  • Imessage stopped sending my SMS text messages, do you know why?

    I updated my MacBook Pro a while ago to Yosemite - and surprisingly it worked out (together with my iphone4) to send imessage AS WELL AS normal text messages. However 2 days ago it stopped working and logs out all the time. Only imessage come through (but not always).
    Do you guys have a clue, what the problem could be?
    Thanks a lot!

    Thanks Malcom! I just tried inserting the short characters before the message and it works.
    But it's really boring having to type *# etc in front of a text message. The iPhone keypad doesn't lend itself very well for such exercises...
    But thanks a lot for pointing me to a temporary workaround.
    It's a bit embarrasing for Apple that Nokias, Ericssons, Samsungs etc do this automatically and you can chose delivery report on/off in settings for all these phones. But with Apple iPhone you have to write your own little string of code to get this basic functionality...
    YOu actually have to make an extra 10-15 key presses in front of EVERY sms/text message you send for this to work... Something truly time consuming and boring. When I just want to send a text-message saying "yes" I have to type in *#KV and jump between character sets etc. Not nice.
    How come Apple has failed to make this central thing of SMS/text work?

  • IPhone 4s Sending Old SMS / Text Messages

    Hi Guys & Girls,
    My iPhone 4s randomly sends out an old message from a few days ago. Basicly very randomly when I send a SMS, intead of receiving the SMS i just sent, the recipient will receive a message from a few days ago and not receive the SMS I just sent.
    Applecare told me it's a problem with the network i'm on, so contacted the network, they can't find anything wrong with network or my account. I have tried 3 diffrent networks in the UK (3, GiffGaff, O2) and all are having the exact same issue, so I highly doubt that it's a problem with the network.
    The receipent has also changed networks and phones, still with no luck.
    Any Ideas? Anyone else having the same problem? I'm quite certain that it's an issue with the iPhone or iOS

    This is happening to me also since I installed iOs6 on my iPhone4. It is most frustrating, embarrassing and potentially damaging to relationships. iOS6 has been nothing but bother for me!!

  • Need help to generate automatic sms(Short message service)

    Does anybody can help me i.e. give some ideas with the automatic sms generation to pre-specified mobile number.

    To do this with JDeveloper you need a SMS gateway that provides a Java API for their SMS services. Then you should be able to easily integrate that API with your JDeveloper/ADF project.

  • Two iphones: which one sends the SMS in Messages?

    I have two iphones with different phone numbers, both logged into the same AppleID. Messages works fine and all messages are synced across all devices.
    Question:
    When I originate a new SMS (not iMessage) from the Mac app Messages, is there any kind of control which device actually sends it respectively which one will be used?
    Dominik

    HI,
    I see.
    The same settings as the iMessages one then (I presume there is not a separate SMS one ?)
    This has always worked as you described for iMessages.
    You can Set the device (iPhone number or Apple ID ) that the Mac Version should "Start Conversations From".
    You can also set similar on the iPhones.
    However as you say if an iMessages is sent to a  specific iPhone Number that iPhone will return an iMessages using that Number  (if you answer it on the Mac it will start the conversation as if it is that number) effectively ignoring the settings made.
    Only brand new iMessages follow the Settings/Preferences.
    8:05 pm      Wednesday; March 4, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • How send/receive sms in j2me

    Hi Friends,
    I am very new to J2ME.I need source code for sending/receiving sms with J2ME as application.
    Can you give the guidence.
    Thanking you.
    Cheers,
    Sateesh

    yea google is ur friend. also try and get the documentations from jcp.org
    what you need is JSR 205

  • Several questions concerning sending bulk SMS texts on a 9300

    Hi, I'm new here and have done the usual thing of checking previous topics using the search facility, but a few things don't seem to have been covered (or if they have the search facility didn't find them)
    1) Why does the 9300 only allow you to send an SMS text message to 100 contacts only? My old 9000 could send to everyone in a group (some of my groups contain 300+ contacts) I've now had to spend almost 2 days re-doing all my groups so that none contain more than a 100 contacts (for example Members A-H, Members I-O and Members P-Z)
    Is there any way around this?
    2) How do I make the 9300 less like an iPhone and more like my old 9000? I hate the way that when you send a text to a group, if several people reply all the replies are grouped together. With the old 9000 each text from each individual was listed seperately, which actually made it easier to know who had replied.
    3) When sending a text to a group, with the 9000 I could see the whole list of recipients, with a red X next to those, who for one reason or another, hadn't received it. With the 9300 I get a red X next to the group name, but not against individuals, so I have no idea who did and who didn't et the message. How do I change the settings so that I do know?

    megane148 wrote:
    Tbh, none of these have helped , btw I am exactly the same but I can make calls and it goes to voicemail and I can't receive texts .... Well I know that my blackberry it receiving it bevause the light is flashing but it never seems to come up ! Can someone help me? And how do you make a question??
    megane, to be even more honest, read your question above... it has nothing to do with threaded SMS conversations and the like of which the original poster here inquired.
    You need to post your own thread by going to the main of this Curve section
    http://supportforums.blackberry.com/t5/BlackBerry-Curve/bd-p/Curve
    at the upper left you will see a black button for NEW MESSAGE.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Send as SMS instead of iMessage?

    So me and my dad recently got iPhone 5's. When ever I text him on his number or he texts me on my number it ALWAYS sends as an iMessage. This is really annoying because I press his number to send my message as an SMS but it still sends it as an iMessage. We both have apple accounts and emails to send iMessages to. could someone please help me?

    T4K3N wrote:
    Well, my dad isn't very 'tech savy' so its kind of confusing to him, the whole iMessage "deal"
    ?? But the messaging app and interface are identical either way.  Just set up an iMessage account, in message settings enable "send as sms" and message away.  If the other recepient(s) have iMessage accounts and devices, it goes as iMessage.  Otherwise it goes as SMS. 
    Apart from the color of the message bubble, what difference does it make?

  • Why will my iphone 5 not send or receive picture messages?

    I have turned  off the imessages and also synced it with itunes as was advised by my mobile network, in addition to turning the phone off and on again but still will not work. Any suggestions?

    Does your carrier's plan allow MMS?
    MMS is a standard way to send messages that include multimedia content to and from mobile phones. It extends the core SMS (Short Message Service) capability that allowed exchange of text messages only up to 160 characters in length.
    Some accounts require additonal services (i.e. cost more) to make MMS supported on a device.  It all depends on your carrier.

  • Setting up SMS Text message iCal alert

    Hey all, I'm trying to set up iCal to send an sms text message alert to my phone as describe on one of apples tutorials.  Either my phone isn't working, or iCal is not sending the alert.  Does iCal have to be open for this to work? Does macmail?  Anyone have any suggestions, or can someone link up to a previous discussion that covered this topic?

    Hey all,
    thanks for checkin up on it.
    The discussion posted by John has the information I was referring to.
    The problem might be with how the telephone company handles email/sms texts rather than with iCal
    I'll post a reply when I get this figured out. 
    Thanks for the replies

  • Why can't i send or receive text messages to some users from my iPad while there is no problem texting them from my iPhone?

    Why can't I send or receive text messages to some users from my iPad mini while there is no problem texting them from my iPhone?

    With the Apple iMessage app, You can only Message with other iOS users - iPads, iPod Touch, iPhone users and Macs running Mountain Lion or higher. With your iPhone, you can send standard SMS text messages to any phone, including Android phones.
    The iPad cannot send SMS messages or receive them either.

  • IMessages not accepting SMS text message since an update

    I upgraded to the latest version of Yosemite, 10.10.2 and ever since then my imessages account has stopped sending/receiving SMS text messages and shows them as pink/red

    Hi,
    Have you tried resetting the option of the iPhone so it causes a New code number to appear on the Mac ?
    Repeat the setting if you don't see a code number straight away.
    9:29 pm      Tuesday; March 3, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

Maybe you are looking for

  • How much is it to repair the cracked screen on my 4s

    How much is it to repair the cracked screen on my 4s

  • Sold-to-party and Ship-to-party is disable

    Dear Expert, In SD IMG I assigned debit memo sales docs type into sales area to sales documents type.  Initial screen for VA01 it is okay. But showing in next screen sold-to-party and ship-to-party is disable. I can not select the customer. Please he

  • Importing AVCHD .MTS Files - HELP

    Since having kids, I have quickly become technologically-challenged and am looking for some help. I have a Canon HG10 videocamera that is AVCHD and all the files are in .MTS format. I haven't been able to use this in years because the hard drive is f

  • PieChart  Eventing

    hi, I am trying to create a piechart model using HTMLB. Is there any eventhandlers for chartmodels?(like we have onCellClick,onHeaderClick etc. for TableViewModel) I want to open a jsp page depending on the sector(in the pie chart)clicked by the user

  • Problem with scrollable result set

    hi can u please tell me how i can get no of rows from a result set.. i am using thin drivers and connecting to remote database,every thing is working fine if i use fwd only type ,but if u use sensitive type it is giving error code: stmt=con.createSta