Need a BADI for raising error messages for equi update (IE02)
Hi,
we are trying to raise few error messages while creating equipments through BADI's (Processing through IE02 and BAPI's).
No BADI's are supporting for raising error messages.
SAP doesnt support processing of userexits through BAPI's (refer note 564467).
we actually need to implement these checks and should available for all the below processes:
Through IE02
while doing through BAPI's
While Executing MASS CHANGE functionality (IE05)
Please suggest any other solution to achieve all the three at one go instead of creating some enhancements for every thing.
thanks.
Hi,
Try and search for a BADI....for transaction I102...take the package name and go to SE18 and see if BADI's are available...
Alternatively search for key CL_EXITHANDLER or get BADI in the main program of IE02..
if you are using SAP ECC6.0 then implicit or explicit enhancements will be available... Utilize them to meet your requirement...
Thanks
Similar Messages
-
How to create a error message for Deleted batch while creating a PO
Hi ,
Can any body tell me how to create error message for a deleted batch while creating a PO in ME21n,
when a PO is created for a deleted batch at GI &GR lebel it is showing a error message,
but i want to show a error message while doing the PO creation.
Thanks,
Sachhiin badi me_process_po_cust u can put this message
METHOD if_ex_me_process_po_cust~check. -
Dear Experts,
I have a requirement for making material description as non mandetory in change request view of mdg material screen.
I have done that using field usage in get data method of feeder classes, but still message is displaying.
This message 'Material description is mandatory is displaying with check action only, but not with save or submit after i anhance field property as not mandetory.
How to prevent error message for material description in MDG material detail screen, when user click on check action.
Thanks
SukumarHello Sukumar
In IMG activity "Configure Properties of Change Request Step", you can completely deactivate the reuse area checks (but will then loose all other checks of the backend business logic as well).
You can also set the error severity of the checks from Error to Warning (per CR type, not per check).
Or you provide a default value for the material description, e.g. by implementing the BAdI USMD_RULE_SERVICE.
Regards, Ingo Bruß -
Error Message For BISystemUser: User not authenticated
We have migrated from DEV to PROD env.(11.1.1.1 -> 11.1.1.3). Along problems with bipublisher - there are some strange thingths: we successfully loging using weblogic account into AdminConsole и Enterprise Manager, but in Answers we get an error: invalid username or password.
nqserver.log:
...[ERROR:1] [] [] ... [tid: 1090] Error Message For BISystemUser: User not authenticated.
...[ERROR:1] [] [] ... [tid: 1090] [nQSError: 43126] Authentication failed: invalid user/password.
In oracle support we found such issue (Doc ID 1308389.1):
OBIEE 11g Error: "Unable to Sign in. invalid username or password was entered" After Changing Repository, Deleting BISystem User, Adding it Back (Doc ID 1308389.1)
Applies to: Business Intelligence Server Enterprise Edition - Version: 11.1.1.3.0 [1905] to 11.1.1.5.0 [1308] - Release: 11g to 11g
Symptoms: In OBIEE 11.1.1.3.0 using default authenticator, it is not possible to log in to OBIEE after changing repository. To troubleshoot, BIsystemuser was removed from global roles and added back again.
Getting error: Unable to Sign in. invalid username or password was entered
Changes: Changed repository, deleted BISystemuser, added the user back
Cause: Several changes e.g changing rpd, deleting bisystem user, adding the user back etc. occurred in the environment and caused log in to OBIEE to stop working
Solution: After a lot of troubleshooting e.g re-starting system in the correct order, refreshing GUIDs, re-start OBIEE with default SampleAppLite.rpd and web catalog, the error persists. The system was uninstalled and re-installed to avoid further corruption and configuration problems in the new installation. This resolved the problem
Does we have to 'reinstall or make a lot of troubleshooting e.g re-starting system ' to solve this error?
It seem to be funny for PROD environment. How we cam resolve this problem?Are you saying you upgraded both dev and prod from 11.1.1.1 to 11.1.1.3 or that you migrated a dev 11.1.1.1 to a prod 11.1.1.3? What did you migrate?
At a rough guess the BISystemUser password is different in dev and prod (created by system on install) and in your 'migration' you've moved the dev credential across to prod.
If that's the case you need to change the bisystemuser password to something known and update the credential store password.
Another possibility might just be that you need to regenerate the GUIDs:
http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10543/privileges.htm#BIESC721 -
Error message for Unable to connect (BIB-16633)
Dear All
I use Oracle Jdeveloper10g (win32), Oracle database10g or 9i (win32 ver). But Failure to connect to OLAP service.
Can anyone give me what is the error message for BIB-16633.
Would be really grateful if you could give me a solution as soon as possible.
Thanks & Regards,
Mr.Tsang. Hong KongFor database versions you need to have at least 9206 for 9i and 10.1.0.4 for 10g. This requires you to apply the 9206 patchset to 9i and the 10.1.0.4 patchset to the 10g base install.
Please note there are a lot of steps invloved in the patching process and you must make sure you have completed all the steps before creating your OLAP schema. Most problems occur because the patching process is incomplete and the OLAP option is in an invalid state.
You can check the state of the OLAP option using the following commands in SQLPlus:
column comp_name format a35
SELECT comp_name, status, substr(version,1,10) as version
from dba_server_registry order by modified;
Once the OLAP option is in a valid state, then you must ensure the OLAPSYS account is unlocked. To test the OLAP environment you can install the BI10G sample schema which will create a new user account called CS_OLAP which contains an Analytic Workspace.
Hope this helps
Business Intelligence Beans Product Management Team
Oracle Corporation -
How to programmatically set an error message for a validation rule of an EO
Hello,
Is there a way to programmatically set an error message when validating any data on an EO?
It seems the API of the EO interface does not have any method to be defined for my needs..
thanksThe other option is that for the error message you can define a groovy expression to call an EO method.
I documented this on my blog
http://blogs.oracle.com/grantronald/entry/dynamic_error_messages_from_a
Regards
Grant -
Revision: 3722
Author: [email protected]
Date: 2008-10-17 14:04:59 -0700 (Fri, 17 Oct 2008)
Log Message:
Bug: BLZ-260 - Error message for a legacy <=3.0 client poll failing against a >=3.1 server is unclear
QA: Yes
Doc: No
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-260
Modified Paths:
blazeds/trunk/modules/common/src/flex/messaging/errors.properties
blazeds/trunk/modules/core/src/flex/messaging/FlexSession.java
blazeds/trunk/modules/core/src/flex/messaging/client/FlexClient.javayour problem:
Missing class: oracle.tip.adapter.jms.JmsManagedConnectionFactory
Dependent class: oracle.tip.adapter.fw.wsdl.WSDLUtils
Loader: oracle.bpel.common:10.1.3
Code-Source: /oraclesoa/oraclesoa/product/10.1.3.1/OracleAS_1/bpel/lib/orabpel.jar
Configuration: <code-source> in /oraclesoa/oraclesoa/product/10.1.3.1/OracleAS_1/j2ee/home/config/server.xml
It happens when server is custom installed, try to reinstall it as full version and problem should disappear otherwise your need another full installation to retrieve and replace orabpel.jar file from (or maybe more) -
Itunessetup.exe couldn't be downloaded error message for for vista.
itunessetup.exe couldn't be downloaded error message for for vista. Couldn't get the update so I uninstalled itunes and still get the error message. I tried reconfiguring the start up components with no luck. anybody know how to fix this?
I actually had started on this before your post but you are right. My luck created some issues but after I got around that it worked. I uninstalled everything in the order it needed to. While I was doing this windows had an update. When I restarted something must have went wrong with the update and it crashed on the start up. took me a while to restore it but when I was done it brought back the programs in their damaged state.
So I did the uninstall process again. restarted. and reinstalled and it all works now.
Thank you for the help.
For those reading this the order to uninstall goes as:
iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, Apple Application Support, iCloud, and finally MobileMe. Skip over any you don't have installed. Then Restart then reinstall itunes. -
Premiere Pro - Insufficient Media error message for transitions
Keep getting Insufficient Media error message for transitions with premiere pro, can you help please?
You need to make handles before adding a transition.
Adobe Premiere Pro Help | Transition overview: applying transitions -
Unsupported black in use error message for laserjet p2055
Receiving "unsupported black in use" error message for laserjet p2055. I replace the cartridge with a new one and the same message appears. Any suggestions how to resolve this issue?
Hi,
Does it become active if you go to System Preferences > Accounts and Click on the current Account Pic and attempt to take a Pic ? (you do not have to Set it as the Pic)
Go to System Preferences > Accounts
Click on Your Account (in the list on the Left)
The Right hand side will now show some options.
Clicking the current Pic will give you access to Edit Pic
One of the Options then is to take a Snapshot.
Take a Snap Shot but you do not have to "Set" the Pic.
This process will invoke VDCAssistant.
Explain further about the PRAM Reset please.
You should shut down the computer (Rather than trying to catch the Restart)
You should then Start the Computer holding down the AppleALT+PR keys and keep holding them until you hear three Start Up0 Bongs (Chimes)
This deletes some settings such as System Preferences Settings for the Volume (Sound) and Date and Time that may need resetting afterwards. (Others may also be effected such as Screen Saver)
On Spotlight.
This does not look or report on certain Folders.
At the Hard Drive Level this is Library and Syatem
In your Home Folder (Little House icon) it will not look in your Library.
com.ecam.iusbcam.plist and com.apple.ichat.plist
Are in your Home Folder/Library/Preferences
The Others are in the /Library at Hard Drive Level
7:15 PM Wednesday; June 3, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat" -
Display error messages for each material
Hi All,
I am using a BAPI which gives errors in return table.I am executing this BAPI for several materials in a LOOP.I need to display the error messages for each of these materials as shown below:
Material 1:
error1
error2
Material 2:
error 1
error 2.
What is the best way to display this?Also plz let me know how to use REUSE_ALV_HIERSEQ_LIST_DISPLAY?
Thanks,
Rakesh.I did the same thing in the below code, go thru it and check it.
* calling the BAPI to update the Asset Master AS02
loop at it_final into is_final.
* If updating of floor area only
if p_farea = 'X'.
* passing new area value to the BAPI
is_realestate-area = is_final-grufl.
is_realestatex-area = 'X'.
call function 'BAPI_FIXEDASSET_CHANGE'
exporting
companycode = is_final-bukrs
asset = is_final-anln1
subnumber = is_final-anln2
realestate = is_realestate
realestatex = is_realestatex
importing
return = it_return.
* If Asset Master is changed with out any errors
read table it_return with key type = 'E'.
if sy-subrc = 0.
flag = ' '.
else.
flag = 'X'.
* Call the COMMIT BAPI
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'.
wait up to 2 seconds.
endif.
* If the Asset Master is changed with out any errors
if flag = 'X'.
read table it_output into is_output with key
bukrs = is_final-bukrs
anln1 = is_final-anln1
anln2 = is_final-anln2
binary search.
if sy-subrc = 0.
* is_output-c_icon = c_green.
is_output-grufl_n = is_final-grufl.
is_output-message = it_return-message.
* Modify the output internal table with the changed new values
modify it_output from is_output
transporting grufl_n message
where bukrs = is_output-bukrs
and anln1 = is_output-anln1
and anln2 = is_output-anln2.
endif.
elseif flag = ' '.
read table it_output into is_output with key
bukrs = is_final-bukrs
anln1 = is_final-anln1
anln2 = is_final-anln2
binary search.
if sy-subrc = 0.
* is_output-c_icon = c_red.
is_output-grufl_n = is_realestate-area.
is_output-message = it_return-message.
* Modify the output internal table with the changed new values
modify it_output from is_output
transporting grufl_n message
where bukrs = is_output-bukrs
and anln1 = is_output-anln1
and anln2 = is_output-anln2.
endif.
endif.
endif.
* If updating of lease commencement date only
if p_ldate = 'X'.
* Passing new lease start date value to the BAPI
is_leasing-start_date = is_final-leabg.
is_leasingx-start_date = 'X'.
* Call the BAPI to change the Asset Master
call function 'BAPI_FIXEDASSET_CHANGE'
exporting
companycode = is_final-bukrs
asset = is_final-anln1
subnumber = is_final-anln2
leasing = is_leasing
leasingx = is_leasingx
importing
return = it_return.
* If Asset Master is changed with out any errors
read table it_return with key type = 'E'.
if sy-subrc = 0.
flag = ' '.
else.
flag = 'X'.
* Call the COMMIT BAPI
call function 'BAPI_TRANSACTION_COMMIT'
exporting
wait = 'X'.
wait up to 2 seconds.
endif.
* If the Asset Master is changed with out any errors
if flag = 'X'.
read table it_output into is_output with key
bukrs = is_final-bukrs
anln1 = is_final-anln1
anln2 = is_final-anln2
binary search.
if sy-subrc = 0.
* is_output-c_icon = c_green.
is_output-leabg_n = is_final-leabg.
is_output-message = it_return-message.
* Modify the output internal table with the changed new values
modify it_output from is_output
transporting leabg_n message
where bukrs = is_output-bukrs
and anln1 = is_output-anln1
and anln2 = is_output-anln2.
endif.
elseif flag = ' '.
read table it_output into is_output with key
bukrs = is_final-bukrs
anln1 = is_final-anln1
anln2 = is_final-anln2
binary search.
if sy-subrc = 0.
* is_output-c_icon = c_red.
is_output-leabg_n = is_leasing-start_date.
is_output-message = it_return-message.
* Modify the output internal table with the changed new values
modify it_output from is_output
transporting leabg_n message
where bukrs = is_output-bukrs
and anln1 = is_output-anln1
and anln2 = is_output-anln2.
endif.
endif.
endif.
clear : is_final, is_realestate, is_leasing,
it_return, flag , is_output.
endloop.
* Display the report out with old and new values
PERFORM output_report.
*& Form output_report
* text
* --> p1 text
* <-- p2 text
*FORM output_report.
* DATA : it_fieldcat TYPE slis_t_fieldcat_alv,
* is_layout TYPE slis_layout_alv.
** Sub routine for filling the field catalog
* IF it_fieldcat[] IS INITIAL.
* PERFORM field_fill USING it_fieldcat.
* ENDIF.
** Sub routine to set the layout
* PERFORM set_layout USING is_layout.
** Function module to display the data in ALV format
* CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
* EXPORTING
* i_callback_program = l_repid
* it_fieldcat = it_fieldcat
* is_layout = is_layout
* TABLES
* t_outtab = it_output
* EXCEPTIONS
* program_error = 1
* OTHERS = 2.
* IF sy-subrc <> 0.
* MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
* WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
* ENDIF.
*ENDFORM. " output_report
*& Form field_fill
* text
* -->P_IT_FIELDCAT text
*FORM field_fill USING pt_fieldcat TYPE slis_t_fieldcat_alv.
* DATA : ls_fieldcat TYPE slis_fieldcat_alv,
* pos TYPE i VALUE 1.
* ls_fieldcat-col_pos = pos.
* ls_fieldcat-fieldname = 'C_ICON'.
* ls_fieldcat-seltext_m = 'Change Status'.
* ls_fieldcat-tabname = 'IT_OUTPUT'.
* APPEND ls_fieldcat TO pt_fieldcat.
* CLEAR ls_fieldcat.
* pos = pos + 1.
* ls_fieldcat-col_pos = pos.
* ls_fieldcat-fieldname = 'BUKRS'.
* ls_fieldcat-ref_fieldname = 'BUKRS'.
* ls_fieldcat-ref_tabname = 'ANLA'.
* APPEND ls_fieldcat TO pt_fieldcat.
* CLEAR ls_fieldcat.
* pos = pos + 1.
* ls_fieldcat-col_pos = pos.
* ls_fieldcat-fieldname = 'ANLN1'.
* ls_fieldcat-ref_fieldname = 'ANLN1'.
* ls_fieldcat-ref_tabname = 'ANLA'.
* APPEND ls_fieldcat TO pt_fieldcat.
* CLEAR ls_fieldcat.
* pos = pos + 1.
* ls_fieldcat-col_pos = pos.
* ls_fieldcat-fieldname = 'ANLN2'.
* ls_fieldcat-ref_fieldname = 'ANLN2'.
* ls_fieldcat-ref_tabname = 'ANLA'.
* APPEND ls_fieldcat TO pt_fieldcat.
* CLEAR ls_fieldcat.
* pos = pos + 1.
* IF p_farea = 'X'.
* ls_fieldcat-col_pos = pos.
* ls_fieldcat-fieldname = 'GRUFL'.
* ls_fieldcat-ref_fieldname = 'GRUFL'.
* ls_fieldcat-ref_tabname = 'ANLA'.
* APPEND ls_fieldcat TO pt_fieldcat.
* CLEAR ls_fieldcat.
* pos = pos + 1.
* ls_fieldcat-col_pos = pos.
* ls_fieldcat-fieldname = 'GRUFL_N'.
* ls_fieldcat-seltext_l = 'New Floor Area'.
* ls_fieldcat-tabname = 'IT_OUTPUT'.
* APPEND ls_fieldcat TO pt_fieldcat.
* CLEAR ls_fieldcat.
* pos = pos + 1.
* ENDIF.
* IF p_ldate = 'X'.
* ls_fieldcat-col_pos = pos.
* ls_fieldcat-fieldname = 'LEABG'.
* ls_fieldcat-ref_fieldname = 'LEABG'.
* ls_fieldcat-ref_tabname = 'ANLA'.
* APPEND ls_fieldcat TO pt_fieldcat.
* CLEAR ls_fieldcat.
* pos = pos + 1.
* ls_fieldcat-col_pos = pos.
* ls_fieldcat-fieldname = 'LEABG_N'.
* ls_fieldcat-seltext_l = 'New Lease St.Date'.
* ls_fieldcat-tabname = 'IT_OUTPUT'.
* APPEND ls_fieldcat TO pt_fieldcat.
* CLEAR ls_fieldcat.
* pos = pos + 1.
* ENDIF.
* ls_fieldcat-col_pos = pos.
* ls_fieldcat-fieldname = 'MESSAGE'.
* ls_fieldcat-seltext_l = 'Status Message'.
* ls_fieldcat-tabname = 'IT_OUTPUT'.
* APPEND ls_fieldcat TO pt_fieldcat.
* CLEAR ls_fieldcat.
* pos = pos + 1.
*ENDFORM. " field_fill
Regards
Gopi -
I am getting an error message for the Update store, saying "To Update this application, sign in to the account you used to purchase it." how do I get rid of these Old unneccisary Updates? anyone?
Welcome to Apple Communities
What's this app? You need to use another Apple ID to update it -
Where is the error message for Debrief line stored?
Hi,
I'm writing an sql query to display all the debriefs (and lines) in error and need to display the detailed error message (the field labeled "Error" on the Material tab on Debrief form). Does anyone know where this is stored in tables? I am digging the form and have not found anything yet. Any help is appreciated.
Sorry - I guess it is - CSF_DEBRIEF_LINES.error_text - But there have been some error records for which I could not find the error message in error_text field and I thought that it was stored somewhere else and that got me confused. - Please ignore the question.
TIA
Alka.
Message was edited by:
user498444
Message was edited by:
user498444when you set a picture to be a background of some folder that picture is not moved from its original location. instead a record is made in the .DS_Store file of that folder indicating that this picture is the one to be used for the background. in case of the DVD it is likely sitting in some hidden folder right on the DVD.
run the following terminal command to enable showing hidden files in finder
defaults write com.apple.finder AppleShowAllFiles 1; killall Finder
then look on the dvd and the picture should be there somewhere. if you still can't find it open the .DS_store file of the folder in question using Text Editor. a lot of this file will be unreadable but the picture path will be present in plain text.
when done rerun the above command after changing 1 to 0. -
I get an error message for publication type
I am using itunes producer to load a book. An error message for "publication type" appears when I get to deliver content area. I am unable to fill in that category box when I go back to that particular screen. The drop down box there shows a check mark that will disappears immediately when clicked on. I know that "digital only" or "new release" needs to be put into that box, but am unable to get any other choices for the box and can not download the book due to error message. I did enter a price in the pricing box.
Thanks for any assistance,
DonI'm having the same problem. Have you found the answer?
-
Firefox will not show links to flv files. I get the error message for each flv file: "File not found. Firefox can't find the file at http:// (path) .flv." Any mov and swf files in this same path will show. I can see the videos in Safari so the paths are correct.
Is this a webpage that contains a link to a flv file? Please post a link to the page and tell us which link(s) are the problem flv files or else post a link to the .flv file itself.
Alternately, click on one of the sample FLV File links on this page and tell us exactly what happens:
http://www.mediacollege.com/adobe/flash/video/tutorial/example-flv.html
It might also help if you post the exact error message, including the path to the flv file.
'''Note:'''
Depending on how you have Firefox set up, clicking on a FLV File link will either save the FLV file to your computer or Firefox may open it automatically in an external application right after downloading (Firefox may ask you first). Firefox itself can't play FLV files so you need a "helper" application (or a plugin for flv files, if ther is one. You can see if Firefox is already set up to download or open FLV files by going to Firefox Preferences and looking in the Applications list. Find the FLV file type in the list and, if the action is "Open with", it should show the application that can play FLV files (e.g., VLC Media Player or Perian). See [[Managing filetypes]] for more information.
Maybe you are looking for
-
How do I adjust the tempo or BPM of a sample to match the song I'm working on?
Hi, the title pretty much says it all. I am working on a tune in audition CS6, however I am aware that audition is not intended for music production, but I already have the beat, bass line and melody laid down in a multi-track session, now I have dow
-
Open Directory server on two Private IP addresses - acting slow
We have an OS X Open Directory server that has two non-routable IP addresses. Primary - 10.0.0.x (LAN) with 10.0.0.x gateway Secondary - 172.16.0.x (SAN) with no gateway When it is plugged in to both networks, Server Admin responds very slowly. If th
-
My iPhone keeps freezing when I am streaming videos. How do I fix this.
-
Aperture loses focus, even in other programs
I developed a new problem over the past week or so. I'll be typing along in any program when it suddenly loses focus. I can click to re-establish but, once it starts. it happens every 10-15 seconds. I think I've isolated the issue to Aperture. Once I
-
Importing from iPod to iTunes and artwork problems
I have lots of albums on my iPod with artwork that display in iTunes, but it doesn't display on the iPod. Is there a minimum resolution for being able to display artwork on the iPod? I like to have the artwork in the MP3 file itself at a low resoluti