Need a basic surround mixing program

i need a basic surround mixing program. i need help FAST....thanks

the most basic is in included in compressor.
go to File Menu . . Import Surround Sound Group. and pick a different file for each spearker,
then choose Dolby 5.1 as the setting (in the audio formats folder)
haven't used it so good luck!

Similar Messages

Sound Blaster XFI Surround - Need a mixer like Creative Surround Mixer

Hi I have the SB XFI Surround card which connects through USB, I had an Audigy which had a great piece of software called Creative Surround Mixer, through which I could easily adjust the sound levels of each speaker by dragging a point on the display and thus mark my location in relation to the speakers. This was really great and I need that software or something similar for my XFI, is there anything with the same functionality? I tried downloading and installing the Creative Surround Mixer but apparently it doesnt work with the XFI. Thanks

Originally Posted by tillt
Thanks for confirming, omik.ron.
Meanwhile, I am working around that issue by plugging the Omni Surround into another machine (running 10.9) and using AirPlay display mirroring from my 10.10 machine towards the 10.9 machine. That way I still have full control over the sound output from the Yosemite machine. That isn't ideal but works good enough until they release an update.
Same issue here. Would be nice to have a working driver on OSX 10.10 !

How do I get my old Surround Mixer recording sources back?

I recently had my computer repaired where I basically had a complete overhaul. In the process they installed a second soundcard (the one that went with the new motherboard) alongside my original Creative Sound Blaster Audigy card (Sound Blaster Audigy Platinum eX). Before, when I would record audio into my computer, I opened the Surround Mixer software and in the record pulldown menu it showed all of the inputs as they relate to my Audigy interface (SPDIF, Aux In 2, Line In 2, etc.). Now when I open the Surround Mixer software, I only get generic options such as Analog Mix, CD Digital, Microphone, etc. and therefore I can't get any outside audio into my computer.
I figured the computer?was defaulting to the?new sound card so I disabled the onboard audio in my BIOS and then installed the Creative Sound Blaster Series 2 Driver. I clicked on the driver and it said that it needed to uninstall another driver that was already there. The install went a little funny and it got hung up a couple of times. Then, I couldn't get Surround Mixer to work at all so I went to the Creative website and installed Software Auto Update. I downloaded and installed all the critical components?but that also went a little funny. It took about three tries and it didn't seem like it actually finished installing, but when I checked on Auto Update again, it said that I was up to date and that everything had installed. I noticed at the beginning that it installed a new version of Surround Mixer but when I opened it later, it still had those same generic options, not the the ones that match my external interface.
What do I need to do to get my original settings back?
Message Edited by audiodrome on 04-30-2009 06:46 PMMessage Edited by audiodrome on 04-30-2009 07:32 [email protected]

>Re: How do I get my old Surround Mixer recording sources back?p audiodrome,
Is the external Audigy Dri've properly connected? Does the Plat Ex have the rear jacks? If so, can you record from the rear LineIn or mic jack and play sound files through headphones or speakers? What happens when you run the Creative Diagnostic? What does Device Manager show? Otherwise, yes, uninstall and reinstall the Creative software. If your install CD has a repair option, try that first. However, you may find you need to remove the Audigy from your PC, reboot without it, and then reinstall everything. Some Soundblaster cards don't play well with some integrated soundcards, so you may also want to disable the integrated soundcard in BIOS.
Message Edited by Katman on 05-04-2009 :00 AM

SB Surround Mixer Volume Bind Keys/Quick K

Howdy,
I was wondering if anyone knows if it's possible (either with an external program or not) to assign quick keys or bind keys to functions within the Surround Mixer for my Audigy 2 Platinum.
For example, I have a Logitech keyboard with a scroll wheel on the side and I within the Logitech software it is possible to assign it to control the master volume, but for my purposes I would like it (or even some regular keys on the keyboard) to control the gain slider for the the Auxiliary 2 Input. This would be helpful to me, so I can mix the volume of my audio coming in via RCA into Aux 2 on the fly, while Im in a fullscreen application that is also running audio that doesn't take kindly to being alt tabbed - which makes it difficult to open the Surround Mixer Window every time I want to change something.
Any ideas would be appreciated, thanks.

cgo wrote:
- the Thinkvantage button.
It has no symbol on xev, and acpi_listen says:
button/prog1 PROG1 00000080 00000000 K
I have no idea what to do for that.
From [ibm-acpi-devel] ThinkVantage key on ThinkPad X61
Is the mask value for this key 0x00000080 or 0x00001018?
Neither. In the documentation, you'll see a table with an entry for
each key. The table shows the "ACPI event" code (0x1018 in your]
example) and the "scan code" (0x17 corresponds to that event).
The documentation mentioned above is the README of the ibm-acpi,
where you hav ACPI events and scan codes explained. But, that's low-level thingy.
To configure the ThinkVantage button, simply follow instructions from the How to get special keys to work. For example, Open an application
where you can find out keycode with xev and map desired action with xmodmap.
(On my T400, under X11 the ThinkVantage button generates event with keycode 156. You need to check yours using xev.)
cgo wrote:- the audio volume controls show symbols (X86AudioMute etc...) but they are not linked to alsa mixer.
If someone has some tips/clues, please share.
Check the ThinkWiki article above, there are audio buttons explained too.

Audigy 2 ZS and Surround Mixer in Windows 7

+?
Ok, I just installed Windows 7 Enterprise on a new HP XW 4600 workstation (NL, Dutch). This is a clean install. I have a Audigy 2 ZS (SB0350) and I dont have the surround mixer. Here is what I did:
?Install Windows 7 Enterprise and take all the pathes from Microsoft.
2.
?Intall the Audigy 2 ZS soundblaster? card in the computer
3.
?After the boot up I ingnore the message ?found new hardware?
4.
?I go to the Creative website and download the following programs
SBAX_PCDRV_LB_2_8_00 and WAVESTD_PCAPP_LB_7_2_00? which are recommended for my sound card.
5.
?I cant find the surround mixer, it is even not installed
6.
?I try the ?webupdate? there are some updates and I install them all
7.
?Again no Surround Mixer.
Can someone explain what I do or did wrong ?
I realy need the Surround Mixer !!

/Re: Audigy 2 ZS and Surround Mixer in Windows 7? i got problem with recording any sound. Recorded sounds are terrible. Sometimes playing sounds are terrible too. i should restart pc for fix playing terrible sound.
i found 2 third-party driver but i didnt tried. Because of decription of 3rd-party driver ;
There is no DirectSound hardware acceleration on Windows XP 64-bit (x64)
The Audigy driver does not support 64-bit addressing, disabling the DirectSound hardware acceleration and causing multichannel sound to be played only in the stereo channels (front left/right).
Workarounds:
- install the 32-bit (x86) version of Windows XP.
- limit to less than 4GB the amount of RAM available to Windows.
- enable the ?Memory Hole? setting in the BIOS Setup, if your motherboard supports it.
Microphone issues on Windows 7/Vista 64-bit (x64) with 4GB?of RAM or more
Audigy driver does not support 64-bit addressing, resulting in random issues with the Microphone (static, robotic or distorted voice, white noise).
Workarounds:
- install the 32-bit (x86) version of Windows
- limit the RAM available to Windows to less than 4GB
- enable Memore Hole in BIOS Setup, if?your motherboard supports the setting
Daniel K's Drivers
<a rel="nofollow" target="_blank" href="http://nomoregoatsoup.wordpress.com/2009/2//daniel_ks-sb-audigy-series-support-pack-3-6/"]http://nomoregoatsoup.wordpress.com/2009/2//daniel_ks-sb-audigy-series-support-pack-3-6/[/url]
[color="#000000"]
[color="#000000"]Robert McClelland's Drivers
<a rel="nofollow" target="_blank" href="http://www.hardwareheaven.com/pax-drivers/9629-fall-winter-pax-edtion-sets-more-set-added-later-one-thread.html"]http://www.hardwareheaven.com/pax-drivers/9629-fall-winter-pax-edtion-sets-more-set-added-later-one-thread.html[/url]

Troubleshooting Surround Mixer and Speaker Settin

Hello,
First, I am using a clean install of Windows XP (no service pack 2).
A year ago I bought an Alienware computer with a vanilla Sound Blaster Audigy 2. Yesterday, I reformatted and reinstalled the drivers and software (Surround Mixer and Speaker Settings only) from the Alienware Master CD. The Creative Surround Mixer and Speaker Settings programs will NOT open. The "Creative Volume Control" icon appears on the system tray. Right-clicking it does nothing. Double-clicking does nothing. Opening the programs from their locations does nothing. I get an hourglass for half a second -- then, nothing.
I updated the Audigy 2 drivers from the Creative website. The programs still would not open. I updated both pieces of software. They still will not open.
At the moment, I have no surround sound -- I'm using 6. Speakers, and the control panel settings allow only 5. and 7.. So I'm in a rather poor position.
I did not have this problem before I reformatted.
Why is this suddenly happening?
I would also like to comment that not including the software bundles with your downloadable drivers is a poor business practice. Every other sound/video card manufacturer includes fully functional driver/application resources on their website. What gives? You're punishing your customers for losing the installation CDs -- and those of us who never had one (Alienware includes everything on a rather sloppy backup CD) are defenseless.

The card is OEM. Alienware offers only the earliest drivers for the card by website (the exact same from the recovery CD) and none of the software found on the CD. My 'hardware analysis' tech support period is expired with Alienware, so they aren't much further help.
When the computer first shipped to me, the Audigy 2 card was installed as "Audigy 2" under control panel, all the software functioned, and updating through www.creative.com worked fine. After the reformat, installing the drivers from the recovery CD (in the Audigy 2 folder) caused the card to be listed simply as an "Audigy" under control panel. None of the software worked. Installing the latest drivers from www.creative.com caused the card to be properly listed as "Audigy 2", but of course, the software still does not work. Surround sound is working, I just have no way to manipulate *any* of its settings.
Does this mean I need to purchase an entirely new retail card in order to use surround sound again properly...

HELP! Surround Mixer Proble

Hi guys, I have an SB Audigy.
Unfortunately, my installation cd was ruined and i had to get a new Hard dri've.
I have successfully installed drivers and the Creative audio console, but i cannot find anywhere the original installation files for Surround Mixer. (ie, not the stupid little updates it has on the support page)
I need help finding a full version of Surround Mixer.

http://ordorica.org/index.php?id=63
Download Audigy 4 ISO. This will install on your soundcard as well.Message Edited by the_One on 0-5-2005 08:43 AM

PPro cs6 or future include Basic DVD Auth program

Maybe it would be nice to see Adobe add a feature that was in PPro2 to CS6 or future versions , it was a basic DVD authoring program which worked very well, eazy and solid ,I still use this on a weekly basic. There are many times I just need to make a basic dvd with basic chapters and buttons but do not want to uses Encore which is very time consuming. Could PE dvd program not some how be add to PPro CS?
Any thought
gavin

I wouldn't get your hopes up on this one. With Dynamic Link capabilities, it's already so quick and easy to get into Encore that I doubt too many resources are going to be dedicated to getting direct DVD burning back into PPro.
For me, it's really just as simple. The only downside I can think of is that you have to create an Encore project first, but other than that it's nothing.
My workflow:
- In PPro, select sequence to be used in play-only DVD (or Blu-ray)
- File > Dynamic Link > Send to Encore
- Create project file in Encore
- Burn DVD (or Blu-ray)
Unless I need/want some more specific control on the transcoding, i usually leave the settings on "Automatic" for a play-only DVD.
You are welcome to file a feature request and try to encourage others to do the same thing here in the forum. I'm not trying to discourage you from doing that, but I do think it's unlikely to really GET much demand from other users, nor would it be a major timesaver over and above the current workflow.
Just my 2 cents!

Stereo to 5.1 Surround Mix

How does one convert a stereo file to a 5.1 surround mix.
I've read through the various discussions & searched the web but have not been able to get help about this topic specific to Logic Pro.
I've got a 5.1 setup with all the panning done & I know about the bouncing of files for export.
My question is how does one actually convert the stereo file into 5 seperate files that sound right when played out together. What filters & setting must I use (delay, phase shift, levels) so as not to create an echo effect.
Any help or guidance will be greatly appreciated.
Thanks

depends on what you want to do by using surround.
talking about a music recording you can't simply convert a stereo recording into a 5.1 recording since you'd have to record to 5.1 in the first place. that means if you're recording an orchestra you need a 5.1 main system such as oct or oct2 or decca tree plus two mics to the back...that's necessary to capture the room's response.
of course you can always use digital (reverb) processing to beef up a stereo mix and add an artificial room response. but the results might be less than satisfactory.
and if you're into film sound you might want to have that airplane over your head...so you'd simply pan it.
i think you need to give us more input according to what you really want to do to get a useful answer...

I need help instantly on this program please

import java.util.*;
public class D3
          private static int[] z = new int[100000];
private static int first=z[0];
          private static int last=z[n-1];
          private static int n=100000;
public static void main(String args[])
Scanner input=new Scanner(System.in);
for(int i=0;i<z.length;i++)
          z=2*i;
int seqSearch(z;50000;n); //method call 4 key where key=mid
          int binSearch(z;first;last;50000);
          int seqSearch(z;35467;n); //method call 4 key where key in the left half
          int binSearch(z;first;last;35467);
          int seqSearch(z;89703;n); //method call 4 key where key in the right half
          int binSearch(z;first;last;89703);
          public int seqSearch(int z[];int key;int n)
     long start = System.currentTimeMillis();
int count=0;
int ans=-1;
for(int i=0;i<n;i++)
if z[i]=key
count++
{ans=i
break;}
return ans;
long elapsed = System.currentTimeMillis() - start;
System.out.print("Execution Time:" + elapsed);
System.out.print("# of Basic Operations:" + count);
     public int binSearch(int z[];int first;int last;int key)
     long start = System.currentTimeMillis();
     int count=0;
     if(last<first){
     count++;
     index=-1;
     else
     count++;
     int mid=(first+last)/2
     if(ket=z[mid]{
     index=mid;
     else
     if(key<z[mid]){
     index = binSearch(z[];first;mid-1;key);
     else
     index=binSearch(z[];mid+1;last;key);
     return index;
     long elapsed = System.currentTimeMillis() - start;
     System.out.print("Execution Time:" + elapsed);
     System.out.print("# of Basic Operations:" + count);
// if anyone could tell me whats wrong with my code i'd be greatful...the program is supposed to perform binary and sequential search on a sorted array of 100000 numbers.once on an item in the middle of the array once on the right side of it and once on the left side...i also need to count the number of basic operations for the same number in both sequential and binary to see whats better.and i need to check the time...plz i need help now,,,

"Guide to a first-time poster"
you need to add exclamation marks to signify how urgent it is
e.g.
i need help instantly on this program please!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
capital letters is better
I NEED HELP INSTANTLY ON THIS PROGRAM PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
starting the italics on line 1, better again
import java.util.*;
public class D3
private static int[] z = new int[100000];
private static int first=z[0];
private static int last=z[n-1];
private static int n=100000;
public static void main(String args[])
Scanner input=new Scanner(System.in);
for(int i=0;i<z.length;i++)
z=2*i;
int seqSearch(z;50000;n); //method call 4 key where key=mid
int binSearch(z;first;last;50000);
int seqSearch(z;35467;n); //method call 4 key where key in the left half
int binSearch(z;first;last;35467);
int seqSearch(z;89703;n); //method call 4 key where key in the right half
int binSearch(z;first;last;89703);
public int seqSearch(int z[];int key;int n)
long start = System.currentTimeMillis();
int count=0;
int ans=-1;
for(int i=0;i<n;i++)
if z=key
count++
{ans=i
break;}
return ans;
long elapsed = System.currentTimeMillis() - start;
System.out.print("Execution Time:" + elapsed);
System.out.print("# of Basic Operations:" + count);
public int binSearch(int z[];int first;int last;int key)
long start = System.currentTimeMillis();
int count=0;
if(last><first){
count++;
index=-1;
else
count++;
int mid=(first+last)/2
if(ket=z[mid]{
index=mid;
else
if(key><z[mid]){
index = binSearch(z[];first;mid-1;key);
else
index=binSearch(z[];mid+1;last;key);
return index;
long elapsed = System.currentTimeMillis() - start;
System.out.print("Execution Time:" + elapsed);
System.out.print("# of Basic Operations:" + count);
and what about the dukes, offer 10 (never to be awarded, of course)
do this, then sit back and watch the replies roll in.

I need a web based JDBC program

Hello,
I'm a web designer \web programmer. My experience has been with PHP and Mysql. But my Java skills are not that good since I�m new to it.
I need to write a database program in Java and my database will be oracle.
Basically this program is used for a restaurant where customers will be able to order online and the restaurant will see the order instantly (like Instant message) and process the order so when customer comes to pick it up, it will be ready.
I just need help with this project like readings or sample if any of you are informed of. I prefer a sample database like it.
I appreciate it.

You start with the tutorial...
http://java.sun.com/products/jdbc/learning.html
Presumably you have already done one or more tutorials on swing, etc. If not then you should start there rather than on the jdbc tutorials.

Can I do a surround mix in Logic or Soundtrack using the digital output?

I'm wondering if I can make use of my home theater system to do surround mixing, or if I need an interface with discrete outputs.
I'm doing surround composition, so it would work great if I could do my initial stereo mix on my monitors, and then get a good surround mix preview using my home theater setup.
Does Logic or Soundtrack recognize the digital optical out as a 5.1 (or 6) channel output?

Thanks, Rick.
That is actually what I did - create folders and move topics into them. I also created a TOC - for a more streamlined navigation through the online help. (Otherwise, the folder names appear in the navigation, which is 'clunky'.) I suppose the TOC is also used for the creation of PDF output, although I am not sure. Anyway... it works... and I have a topic hierarchy - in my Project 'pod' and TOC.
Much appreciated,
Mary
P.S. Too bad there isn't an easier method of making a topic hierarchy in the Project. This can be accomplished in Flare without the need for extra folders. Oh well...

Audigy 2 ZS - Surround Mixer - REC setting greyed

Hi! I can't select my sound input device in the surround mixer anymore. Here is a picture:
<img alt="mixer" width="500" src="http://img95.imageshack.us/img95/09/mixeriq.jpg" height="302" title="mixer">
As you can see the slider is greyed out. My microphone works just fine, but I cannot adjust the volume anymore.
I'm using Windows XP, I recently installed Skype and TeamSpeak (checked both programs, the input settings are NOT on "automatic", so the Creative Surround Mixer should be where I adjust the input volume)
I can use the windows settings to select another recording device and adjusting the volume also works, but I want to use the creative mixer, this worked in the past and I want it back
Any ideas? Maybe I'm missing something important.

Hmm no but I reinstalled the latest driver (7 Jul 08)
http://de.europe.creative.com/support/downloads/download2.asp?MainCategory=&Product=495&dlcentric= 058&Product_Name=Audigy+2+ZS&filetype=&OSName=Wind ows+XP
Is that one bugged? Should I downgrade to the driver on the CD?

TA38622 is there any way to send sms by a connected iPhone to computer ? if so does it need any special application and program ? with witch port ? thank you.

is there any way to send sms by a connected iPhone to computer ? if so does it need any special application and program ? with witch port ? thank you.

Hi, Santosh..., and welcome to the Community,
I would recommend testing the SMS reply forwarding to your mobile number. Depending upon the results and if this works for you, you could then contact Skype Customer Service to cancel and request a refund.
In other words, SMS will be received via your mobile number, not via your Skype Number.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Midi and Audition CC? Does Au have a Midi option or do I need to buy a new program?

I have just bought a new Midi keyboard and was wondering whether it will work with Audition? Are there sounds in Audition or do I need to buy a new program?

The only version of Audition which ever had MIDI capability was AA3. The implementation there was somewhat "flaky" and all subsequent versions have not included it.
So the answer to your questions are, no, there are no "sounds" in Audition CC and yes, if you wish to use MIDI and virtual instruments extensively, another program is needed. Many of us run Reaper alongside Audition, using the former for MIDI, multitracking etc., and the later for mixing and mastering.

Need a basic surround mixing program

Similar Messages

Maybe you are looking for