Need a developer to work with me - FMS/Flex/RTMFP/RTMP etc.
Hi,
I already own a video chat website that uses strictly Stratus (RTMFP), as you may already know, the connections between the peers are not always stable, as in people don't always connect to each others.
From my past programmer's opinion, it was because of Stratus, he is sure his coding is good.
With the release of FMS 4, which includes RTMFP, my plan is to modify my website so it works with FMS 4 Enterprise Edition, which I will be purchasing.
I want to combine both RTMP and RTMFP in the connections between the peers.
There are also a lot of improvements to come for my website, which is all about Flex/FMS/php/MySQL.
If you want to be the first to take part in a project that's going to be very big because of :
1. The opportunities that FMS 4 offers us;
2. The motivation I have, and that you should have!
3. The resources I have to keep growing effectively.
So, if you are competent with this type of programming project, please reply and contact me
Thanks,
Dany
http://www.adobe.com/products/flashmediaserver/helpmechoose.html
If this is correct the RTMFP peer introduction services is available only to the Enterprise version, FMIS support RTMFP and IP unicast only, means communication is only betweend Client and FMIS possible but no peer2peer. I'm not a FMS Guru, but I think you can't replace with FMIS the Stratus service for a application as Webcam chat and if you use FMIS for it without Stratus you need to provide the needed bandwith.
If I have missunderstand I would be happy, this will save for me many bucks :-)
Similar Messages
-
Is there any where that I can voice why I returned my beloved new Ipad? I was told I could move my Keynote presentations to it and then use it for my
business presentations. Unfortunately that turned out to not be true. I need the IPad to work with a remote.
The Ipad is on a short cable to my projector. I am usually on a podium 30 feet away. No infra red receiver on the IPad and
the Iphone remote needs wi fi which is not always available in all the locations I do my teaching and lecturing in.
If you can build a remote into the Ipad in the future I would really like to use an Ipad to replace my heavier lap top for business travel. Thank You Kathy McNeil."The Ipad is on a short cable to my projector."
Get a longer cable? -
i have an ipod touch and just updated my software to ios 7.1.2. Now I get the message that my adapter, accessory does not support my device. Is there a new adapter that I need to buy that works with the ios 7.1.2?
This is not my problem. However, I think it may be related to an old speaker. I was using the 30 pin adapter for about a week after the upgrade to 7.1.2. But I think with the update the speaker won't work anymore. I will try with a new speaker system. Thank you for trying to assist.
-
i m coming from linux platform ... now need my g to work with vim ... how to install g which supports C 0x ... why does not it has repository with apple ... its so easy rather than going to UI ...
tom i have been using ubuntu for c++ project
i use lambda and atomic (c++0x) but now as I am working on MAC not able to use them
installed xcode(4.3) and changed compiler settings to LLVM3.1 but still both features are not available
to compile wanted to have g++ which supports c++0x features ...
new to MAC (2-3 days) so was in rush to solution
let me know if you have some suggestion ...
else will try with eclipse cdt .... -
Will BlazeDS work with Flash (not Flex or AIR)?
Does anyone know if Blaze can work with Flash(not flex or AIR)?
If so, how? Any examples?
Thanks,
JamesHallo Russell,<br /><br />I'm a beginner with Flex and Flash, and I already succeeded calling the remote object with Flex. But my company requires me to use Flash (AS3).<br /><br />So, could you please give me an example of ActionScript code to call a RemoteObject in BlazeDs? The url? and call string?<br /><br />I also use Spring behind.<br /><br />I tried to use the url: "http://localhost:8080/myAppName"<br />and then the call string is "myService.getList"<br /><br />myService is the destination in the service-config.xml<br />getList is the method from the remote object which is a Java class.<br /><br />Here is the snippet from remoting-config<br /> <destination id="clasificationService"><br /> <properties><br /> <factory>spring</factory><br /> <source>clasificationManager</source><br /> </properties><br /> </destination><br /><br />and Here is the snippet from services-config:<br /><br /> <!-- Spring factory registration --><br /> <factories><br /> <factory id="spring" class="com.airbus.cm.cd.controller.SpringFactory" /><br /> </factories><br /> <channels><br /> <channel-definition id="channel-amf" class="mx.messaging.channels.AMFChannel"><br /> <endpoint url="http://{server.name}:{server.port}/{context.root}/messagebroker/amf"<br /> class="flex.messaging.endpoints.AMFEndpoint" /><br /> <properties><br /> <polling-enabled>false</polling-enabled><br /> </properties><br /> </channel-definition><br /> <br /> <channel-definition id="my-secure-amf" class="mx.messaging.channels.SecureAMFChannel"><br /> <endpoint url="https://{server.name}:{server.port}/{context.root}/messagebroker/amfsecure" class="flex.messaging.endpoints.SecureAMFEndpoint"/><br /> <properties><br /> <add-no-cache-headers>false</add-no-cache-headers><br /> </properties><br /> </channel-definition><br /><br /> <channel-definition id="my-polling-amf" class="mx.messaging.channels.AMFChannel"><br /> <endpoint url="http://{server.name}:{server.port}/{context.root}/messagebroker/amfpolling" class="flex.messaging.endpoints.AMFEndpoint"/><br /> <properties><br /> <polling-enabled>true</polling-enabled><br /> <polling-interval-seconds>4</polling-interval-seconds><br /> </properties><br /> </channel-definition><br /><br /> </channels><br /><br />Best regards,<br />Raymond.
-
I need a keyring (that works with network-manager)
Hi there,
I'm new to Arch linux (coming from Ubuntu) and I'm wondering how to set up a keyring that works with that gnome-network-manager applet and ssh(fs). I previously used GNOME and the gnome keyring, and all out of the box.
I couldn't find any manuals on how to set up the gnome-keyring in Arch linux, neither regarding ssh(fs) nor network-manager. I read people are complaining about network-manager asking for the keyring-unlocking-password, but this doesn't happen for me.
How do I set up the gnome-keyring propertly?siriusb wrote:moljac024:
https://bugs.launchpad.net/wicd/+bug/377471
From this bug page:
The /etc/wicd/wireless-settings.conf file is made root-readable only. This means that any malicious users must have root access or physical access to the machine. In either of these cases, you have far more problems than worrying about the wireless network key.
Please see http://developer.pidgin.im/wiki/PlainTextPasswords for a very good explanation as to why the passwords are not encrypted.
It may be plain text, but only root can read/write. -
I need a keyboard that works with IOS 7, Any ideas?
I have tried two different keyboards,one from Belkin and one from logitech...neither one works with IOS 7....I need a keyboard that works...anyone have any ideas?
I have the apple mini wireless keyboard. Works!
-
Need digital camera that works with Quicksilver
I need a relatively cheap digital camera that will work with a G4 Quicksilver. I know I'll probably have to get a used one, but that's OK. I just have no idea which older brands or models will work with a Power Mac. Anybody have any suggestions?
Cameras often allow a direct USB cable connection to a computer. This could possibly lead to compatibility problems, depending upon the requirements for each camera.
For cameras with a flash memory card slot (many modern models have one), an alternative solution would be to use an appropriate USB memory card reader connected to the computer. One could then move the memory card (for example, SD or CompactFlash) to the USB reader. The transfer is usually relatively fast, and no power is drawn from the camera batteries. The G4 should not have difficulties reading files from memory cards.
Jan -
I need Bandwidth, Filtering & Accounting work with Aironet 1310
Hi Mates,
Please I need an affordable Cisco hardware or software (for SMB) to control about 200 clients in my wlan (hotsopt internet caffe)
all work with two Aironet 1310 .
I'm not concerned about security in the first palce, but Bandwidth, Filtering & Accounting.
MY Regards
SaherJust to be clear: You want to give wireless access to 200 clients over two APs *?at the same time?*
That would be a Very Bad Thing, and almost certainly not possible.
Generally speaking, with "normal" traffic (no such animal exists), you can expect to run 20 - 30 clients tops per AP.
It is not likely that you can impose your restrictions at the AP level. More likely, you'd want to do it at the switch, possibly at the router.
The problem is that the AP acts as a hub: shared bandwidth, and collision avoidence. Basically it boils down to every client getting a timeslot to communicate. When you have too many clients on a single AP, the clients are not talked to often enough, and you get association drops. Before association drops, you get really poor performance that progresses to request timeouts.
The other issue is the uncontrolled mix of clients that you're likely to see. If one client is using 802.11b (11 meg), the net effect is an additional drop in available bandwidth.
The bottom line is that it's not a plan that's likely to succeed.
You may want to investigate 802.11a (5GHz). It has more non-overlapping channels (802.11g has three). To get that many poeple in a confined space and maintain acceptable connections and performance, the extra bandwidth will help a lot.
Good Luck
Scott -
What is needed to develop web services with DI Server using C #?
Hi,
What is needed to develop web service using DI Service ad C#?
Does anyone have any examples?
thanks,
WillianLogin C# sample
u2018 Create Service WebReference
LoginWebRef.LoginService loginService = new LoginWebRef.LoginService();
// service command login call
string sessionID = login.Login(
"localhost",
"COM_OBS_AUT_TEST",
LoginWebRef.LoginDatabaseType.dst_MSSQL2005, true,
"sa", "xx",
"manager", "manager",
LoginWebRef.LoginLanguage.ln_English, true,
"localhost:30000");
Business Partners add C# sample.
// Create Service WebReference
BPWebRef.BusinessPartnersService bpsService = new
BPWebRef.BusinessPartnersService();
// MsgHeader class
BPWebRef.MsgHeader msgheader = new BPWebRef.MsgHeader();
msgheader.SessionID = DIServerSessionID;
msgheader.ServiceName = MsgHeaderServiceName.BusinessPartnersService;
msgheader.ServiceNameSpecified = true;
bpsService.MsgHeaderValue = msgHeader;
// fill business partner class
BPWebRef.BusinessPartner bp = new BPWebRef.BusinessPartner();
bp.CardCode = "MyBPCardCode";
u2026
// service command call
BPWebRef.BusinessPartnerParams bpParams = bpsService.Add(bp); -
I need a router that works with Apple eMac OS 10.3 and is WEP encryption capable.
The WRT54G router has been recommended by TV provider Sky Angle. (I will receive Sky Angle over my DSL modem and must send signal to my TV via wireless router.)
But, I use an Apple eMac running OS 10.3. 1GHz that the router must be compatible with. And, before I buy, I want to get the fastest, newest, compatible version of a wireless router in hopes it will work with any new Apple lap top that I hope to get. Please help! I can't find any way to ask this question to the LINKSYS web site or company. Additionally, what is "G" mode or "N" mode: that might be important in the ultimate model of router to buy.
Thanks very much for any help.You can buy WRT300N. For more information on this product you can browse website www.linksys.com
-
WCS does need WLC or can works with stands alone APs
Hi all, I'm student and curently reading about WCS capacity. I would know if WCS requier AP to pass through a WLC to work with WCS or if WCS can work with multiple "stand alone" APs (without any WLC)
Thanks.WCS can work with standalone APs that you can add in WCS.
Nevertheless the configuration options are limited.
The configuration guide is a good resource for more information.
http://www.cisco.com/en/US/products/ps6305/products_installation_and_configuration_guides_list.html
Also you can get an evaluation license for WCS for 60 days for 20 APs.
You can download the software and play with it as well:
http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=279705270
WCS general product page:
www.cisco.com/go/wcs -
Need Authorware News Update - Future with Adobe ? Next Version ? Etc
I've been away from Authorware for many months.
I'm sure these questions have been asked before but hopefully
someone will
be kind enough to give me a quick run down and update.
- Any word on Authorware's future since Adobe acquired it?
- What about the next version ? (if any)
- Should we ditch Authorware and try to go with something
else that is more
likely to be here down the road?
thanks for any comments.Speaking of other tools...is there anything out there that
can actually
compete with Authorware and its vast custom possibilites? I
get occasional
management requests to see if any new tools can do what AW
can
better/faster/less overhead and so far nothing. AW is the
most powerful
media based programming tool I have ever run across. Most
other products
are just training template wizards.
Thx,
K
"Erik *ACE*" <[email protected]> wrote in
message
news:e4fvih$4d4$[email protected]..
>- Not official. Apparently there's some sort of beta
going on but no
>official word. Last year's TAAC indicated work is
progressing.
>
> - The next version would be 8, considering the most
recent version is 7
> ;-)
>
> - Sure, if you want to. Does it really matter? What does
Authorware not do
> now that prevents you from continuing to work with it?
What promise is
> there that whatever that problem is will be addressed
with the next
> release? What other tool would you move to?
> Erik
>
> tmb wrote:
>> I've been away from Authorware for many months.
>>
>> I'm sure these questions have been asked before but
hopefully someone
>> will be kind enough to give me a quick run down and
update.
>>
>> - Any word on Authorware's future since Adobe
acquired it?
>> - What about the next version ? (if any)
>> - Should we ditch Authorware and try to go with
something else that is
>> more likely to be here down the road?
>>
>> thanks for any comments.
>>
>>
>>
>
> --
> Erik Lord
>
http://www.capemedia.net
> Adobe Community Expert - Authorware
>
http://www.macromedia.com/support/forums/team_macromedia/
>
>
http://www.awaretips.net -
samples, tips, products, faqs, and links!
> *Search the A'ware newsgroup archives*
>
http://groups.google.com/groups?q=macromedia.authorware
> *The Blankenship Caveat: Note that direct linking to
http content
> through any Authorware icon will likely fail if a proxy
server is
> present!* -
I need to have COMMit WORK with in a FM, which is calling in UPDATE task
Hello
I am sending out the custom IDOC from SAP to partner application by writing a custom my_OB_IDOC_FM, well.
With in this my_OB_IDOC_FM, for some functionality, i am using a standard SAP FM and I need to use a COMMIT WORK immediately after this standard SAP FM call.
But, all my IDOC is calling in update task, so once am triggering IDOC (inturn my_OB_IDOC_FM is calling in UPDATE task) am getting dump because of that inside used COMIT WORK statement!
So, pls. let me know how can replace this COMMIT WORK or hoe can i fix my issue? can i do like CALL FUNCTION standard_SAP_FM in background task/seperate task? so that i can use COMMIT WORK?
Thank youI've dealt with something similar before.
You could make a new z-program and run in a background job... like this:
* create the job
CALL FUNCTION 'JOB_OPEN'
EXPORTING
JOBNAME = mv_JOBNAME
IMPORTING
JOBCOUNT = mv_JOBCOUNT
EXCEPTIONS
CANT_CREATE_JOB = 1
INVALID_JOB_DATA = 2
JOBNAME_MISSING = 3
OTHERS = 4.
* submit the program to the job
SUBMIT ZPROGRAM
WITH i_ebeln in mr_ebeln
WITH updall = 'X'
WITH wq_simul = ''
TO SAP-SPOOL
DESTINATION sv_output_device
IMMEDIATELY ''
KEEP IN SPOOL 'X'
WITHOUT SPOOL DYNPRO
USER sy-uname
VIA JOB mv_jobname NUMBER mv_jobcount
AND RETURN.
* submit the job
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
JOBCOUNT = mv_JOBCOUNT
JOBNAME = mv_JOBNAME
STRTIMMED = 'X'
EXCEPTIONS
CANT_START_IMMEDIATE = 1
INVALID_STARTDATE = 2
JOBNAME_MISSING = 3
JOB_CLOSE_FAILED = 4
JOB_NOSTEPS = 5
JOB_NOTEX = 6
LOCK_FAILED = 7
OTHERS = 8. -
Need additional field populated along with this FMS on Market Docs
During creation of a marketing doc such as Sales order, the user searches for the item which has this query loaded into item field.
SELECT T0.[ItemCode], t1.[AvgPrice],t1.[OnHand], T1.[WhsCode] FROM OITM T0 INNER JOIN OITW T1 ON T0.ItemCode = T1.ItemCode WHERE T1.[WhsCode] =(SELECT warehouse from oudg where code= 'manager') and t0.[invntitem]='Y'
Search of item field displays other info such as quanitty in warehouse and warehouse along with item code. In above case the warehouse is 02 for maanger profile.
However, on selecting any of the above items, the warehouse displayed on sales order is 01 (not 02 which is what it should have been). Why did not the relevant warehouse 02 get loaded?
How can I over come this without using just the above FMS query. Do I have to use another FMS query for warehouse field also?
Thank you.
Hi, I have this FMS query that displays items from warehouse of the logged in user's defaults. However, the actual warehouse on salesHi,
FMS query will only return the first column from the query result. Whatever displayed will be irrelevant. If you need Warehouse 02, FMS has to be set on warehouse column with the whscode as first column.
Thanks,
Gordon
Maybe you are looking for
-
Data Pump - expdp and slow performance on specific tables
Hi there I have af data pump export af a schema. Most of the 700 tables is exported very quickly (direct path) but a couple of them seems to be extremenly slow. I have chekced: - no lobs - no long/raw - no VPD - no partitions - no bitmapped index - j
-
Clients Backup on Server 2012 Essentials Encrypted?
Hello, I would like to backup a client running win 7 ultimate, with encryption and bit locker enabled onto Server 2012 Essential. I am just wondering if the backup on the server will continue to be encrypted? If not is there a way to keep the backup
-
Hey you all, I want to add some changes to one of my projects in Imovie. But the project I'm working on wont open anymore in the library. I can play it, but I can't click the button 'change project' anymore. And it's only the case of this one particu
-
We have been using j2ee.jar previously in our project but its been recommended to pick it from Weblogic but there are too many jars similar to it, plz guide which one to ake in our project.
-
I have some Flex charts in an app and the various numbers going past four digits don't have any formatting, how do you insert this? I.e. I want it to show "12,000" instead of "12000" M.