Need a display driver (s3) for Tecra 8100

I have installed Windows XP pro on my tecra 8100 and can't get a full screen.
Does anybody know what's wrong? Do I need a new display driver voor the S3 Savage MX or is it something else?

Hello,
check in the Bios if the setting "Fullscreen/Widescreen" is enabled.
Best Regards,
Ben

Similar Messages

Windows needs to install driver software for your unknown device

Windows needs to install driver software for your unknown device
This is the message that i get when ever i plug in my ipod touch to my computer. the computer is running on vista. i dont know what to do, because i tried to follow the steps suggested, but it didnt work, the computer said that it couldnt find anything and to check with apple for some driver software. HELP!!!

The iPod touch and iPhone do not use the same type of USB drivers that other Apple devices use. They both require Apple Mobile Device Services to be running. Using this tech article as a guide, you can easily fix this: http://support.apple.com/kb/TS1567

T61: Windows needs to install driver software for your ATA Device-help!!

Every once in a while after I turn on my laptop I get this message: "Windows needs to install driver software for your ATA Device." WTF? REALLY W-T-F? I am not computer illiterate When I reinstall the driver (from the site) it works. Then I turn on the computer and get the same message. PLEASE HELP... W-T-F?????????
The DVD player has been out of commission all of May so far. I can't stand this. What is happening?
I can't even download the driver from Lenovo.
PLEASE HELP.
Thanks in advance.
You are a God if you can't help me fix this.
Moderator note: Type added to subject line for clarity. The title of a thread should accurately reflect the subject of the discussion and be as technically specific as possible as stated in the forum rules.
Message Edited by Agotthelf on 30-05-2009 08:21 AM

Welcome to the forum!
Since I'm not quite certain that God frequents this forum, would you please tell us the model number and operating system of your ThinkPad and we'll take it from there...
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Need to display different colors for Actuals and forecasting values in WAD

Hi Gurus,
My requirement in the report is, I need to display different colors for particular values like Actuals(say value type 10) and for forecasting values(say value type 20) , and data will uploaded from flat file.
Scenario : If I upload the data for March Month, I receive actual values upto March(Jan to March month) and from April to Dec(Forecast values with value type 20), Every month I will be getting file and similarly for subsequent months, i will get current month actual values and forwarding months forecasting values,
Now , my requirement is, When ever i execute the Report, Say if i execute for April Month, Upto April( Jan to April for actual values should be displayed in one color) and from May to Dec ( forecast values should be displayed in different color).
I had tried with following options like exceptions and could not display , as it runs based on key figure values where as my requiremnet is based on the CALMONTH , i need to show different colors for both actual and forecast values.
Kindly, help me out from this,
Thanks

Hi,
it is not necesseary that you need to do that in WAD , you can do the same in BEx platform, Since WAD is build above the bex reports. so automatially any changes done in Report will be replicated in WAD
Go for Exceptions in Bex. Give some range for Actuals and Forcasting at the creation of the exception.
if you do those changes in BEX automatically it will replicate in the WAD.
for more information please read this link
http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/content.htm
hope this will solve your problem.
Santosh

Editing software crashing-do I need Display driver update for Satelite C660

Hi folks,
recently I have installed trial versions of Adobe Premier cs5, then avid media composer and neither of them are loading, (not responding) and Adobe crashes on importerquicktime.prm.
Everywhere I look it seems to be telling me I need to update my drivers, but I have the latest driver available for this model,
Is it a QuickTime issue?
Or a driver issue?
Can anyone help me or even let me know what my options are?
Thanks
Conor

Hi
In internet I could find this interesting info:
+I am having issues with the ImporterQuicktime.prm with the new update 5,03.+
+Ive been editing on a project for months, and exported a QT with Avid DNxHD codec,+
+I started another project with this QT DNxHD file (to make sample clips), and then I updated to 5.03, and now PPro CS5 runs very slow, and then locks up. I did read the forums to find a solution.+
+I noticed when re launching PPro CS5, it would hang on the Exporter, and Importer Quicktime .prm, so I tested removing the plugin from the PPro>plugin>common folder. PPro CS5 launches very quickly and runs smooth- although the QT files are off line+
It looks like its not display driver issue If the info above would not help you, you should get in contact with Adobe support

Need newer display driver for my Satellite A350D

Hi guys,
I've a problem with 1 game.
Can someone help me refresh my driver ? I've ati mobility radeon hd 3650
My notebook is Toshiba Satellite A350D. please :)

Hi Elios
You asking for driver but for what system?
Generally speaking the Toshiba EU driver page provides all drivers for Toshiba EU notebook series.
If you need another version, you will need to search somewhere in the net on 3rd party pages for independent, modified drivers.

Re: Need right display driver for my atellite L300D

Hello
I have a problem. I have installed Windows Vista 32bit on my laptop again and want to download all necessary drivers but Im missing the drivers for the net, and graphic card.
I already tried to download them from the download page but could not do this.
In device manager there is listed standard vga graphic card even though I have an ATI 3100 graphics Radeon and I have a 16:10 (1280x800) resolution.
Now it is suddenly at 15:9 (1024x768) and I have no AREON merchandising
merchandising can only standart vista
Can someone please help me?
Thank you in advance.
PS: I have a Satellite L300D notebook.

Hi mate
> but Im missing the drivers for the net, and graphic card.
I assume you need graphic card driver and WLan or LAN driver.
You can use the LAN/WLan drivers released for other series. But you need to know what LAN or WLan card you have.
So install an hardware diagnostic tool like Everest Home edit which would provide all necessary info about the hardware parts.
This would help you to find the right WLan or LAN driver.
Regarding the graphic card driver;
Many Toshiba notebooks support the same GPU.
So you should try some drivers released for other notebook with the same graphic card.
PS: the full notebook name would be helpful too

Replace power adapter for Tecra 8100

Hi support,
I have Tecra 8100 where its original power adapter has died. I need to buy a new one, but I found that Toshiba has replaced the PA2444U adapter model with a new model. Which power adapter model that is now compatible with Tecra 8100?
Thanks. I really need an answer because I need to work with the laptop.

The Tecra 8100 will function with many adapters from Tecra 8000, 8200, 9000, 9100 and the M1, M2 range etc.
There are of course differences in the output current rating, but in practice it is still possible to use a higher output adapter without issue, provided the voltage is 15V DC.
For example, I am currently using a model PA2450U (15V, 3A) plugged into my Tecra 9100 port replicator and this works fine. The only potential down side is that it might take longer to charge the battery than it would with the correct model (which would be rated 4A).
This means you shouldn't have too much trouble finding a suitable substitute.

Display Driver Update for Satellite L30-105

Could anyone give me an idiots guide on how to update a display driver for my Satellite L30-105 ( PSL33E ) PLEASE?

LOL. You need a idiot guide?? Come on man ;)
Ok, here is my guide;
Download the graphic driver for your notebook model.
Unzip the package.
Then access the device manager, mark the graphic card, update driver.
Then a new window will open.
There you have to use the second Advanced option.
Then choose the option called Dont search. I will chose the driver (or something like that)
Then point to the place where the driver package has been stored on the HDD and finish the installation.
Greets

Nvidia GeForce4 440 Go Display driver wanted for Satellite 5105-S901 !

Dear all,
I have Toshiva Satellite 5105-S901 and experiencing some proplems with running latest games, perhaps because of pretty old Nvidia GeForce4 440 Go Display driver. Laptop has been bought in 2002, and since then video-drivers were not updated.
So, where can I get them?
Nvidia does not provide drivers for Go chipsets and send customers to manufacturers. But on tosiba.com I found drivers that were placed there exactly in 2002. My laptop already has these.
But where to get the new ones?
I don't believe that there in no driver-update heas been done by Toshiba for three years for Nvidia GeForce4 440 Go Display driver.
Well, need some advice.
Sincerely your's
Alex.
P.S.:Laptop still has good perfomance(P4-2Hz,2gb RAM,64Mb Video).

Hi Alexei,
I had problems with my ATI Radeon graphics not working an some games, so I contacted the TDK technical support guys who suggested I should use the latest drivers from http://www.omegadrivers.net/.
Sadly I could not get the ATI drivers to load on my notebook but perhaps you will have more luck with the NVIDIA ones.
I agree with you that it is a great shame that Toshiba do not update their graphics drivers.
regards,

Error "a plugin is needed to display this content" for embedded Google map, but no plugin identified.

When I try to view a page that has a Google map embedded on the page, I get the error message "a plugin is needed to display this content". However, I don't know what plugin, where to get it, etc. I've tried searching for this issue but haven't been able to come up with anyone else experiencing a similar issue, nor does there seem to be a plugin for Google Maps that I can find.
The page is here:
http://osiama.org/lodges#
The map displays when one of the links is clicked in the table.

I'm not sure why, but the site uses <embed> for the map instead of <iframe>.
When Firefox wants to render an <embed>, it needs to know what type of object is being embedded, and the site doesn't supply that information, so you see a generic "I don't know how to handle this" error.
Unfortunately, I don't think there is a quick workaround for you as the end user. If you are the type to tinker, you can manually edit the code of the page in the web console as follows:
* right-click the plugin message and choose Inspect Element (Q) - the web console will open to the Inspector, with the <embed> element selected (screen shot #1)
* double-click embed and edit it to iframe, then press Enter to finish the edit
* Firefox will now load the map (screen shot #2)
This isn't a general fix-all for plugin errors, and ultimately the site will need to change this.

Need to display error meesage for Tcode MD50, Any User exit???

Hi,
For Tcode MD50, We have to give the input sales order number and Sales Order Item number and press enter, It gives detail output for MRP.
Here After giving the input sales order number and Sales Order Item number , when we are pressing enter I need to display a error message at status bar based on sales order number.Is there any user exit or badi for the same?
Please help me. I am using ECC5.0 version

Hi ,
      These are userexits
SAPLATPC-LATPCU02     EXIT_SAPLATPC_001     ATP00001     User Exits in the Availability Check
SAPLATPC-LATPCU02     EXIT_SAPLATPC_002     ATP00001     User Exits in the Availability Check
SAPLCUD0-LCUD0U08     EXIT_SAPLCUD0_003     CCUX0100     Synchronization of Variant Configuration Initialization
SAPMM61X     EXIT_SAPMM61X_001     M61X0001     User exits PP-MRP materials planning

Changing IRQ assignment for Tecra 8100

I think there is an IRQ conflict on my Tecra 8100. I have a PCMCIA wi-fi card which uses IRQ11. This IRQ is also shared by the Yamaha sound device. And ALSO by the USB root hub :-(
I can't work out how to disable USB in the BIOS - I have set it to "DISABLED" but the USB root hub is still detected in Windows. I'm going to try updating the BIOS to see if I can resolve this.
I also can't work out how to disabled the on-board sound - is this possible?
I initially had the PCMCIA card in the PCI port 1 (which had cardbus controller IRQ of 11). I tried changing to the other PCI port (with IRQ 7) but the card still used IRQ 11 - now I have FIVE devices all sharing IRQ 11 !! USB, PCMCIA, sound, and 2 PCI cardbus controllers.
Any ideas on how I can get rid of the USB and/or change the IRQ of the sound device?!
Cheers,
Dan.

Hi Tom, and thanks for your response.
I thought maybe I had an IRQ conflict, but after doing a bit of googling I find that this is normal and Win2k assigns either IRQ 9 or IRQ 11 for most devices and that it's not possible to change them without reinstallation of the OS.
The problem I have is with my network card. I have a PCMCIA wi-fi card connected to my home wireless network. All PCs in the house are using the same brand of card (3 PCs using PCI US Robotics and laptop using PCMCIA US Robotics all connecting to a US Robotics wireless access point. The laptop connection is dropped every 5 mins and then reconnected.
In fact, the connection is dropped every five mins EXACTLY which is why I thought the problem was related to the laptop and not interference. Other PCs are not affected in the same way.
I have looked at power management settings, but can't find anything that could cause this. There are no specific settings for the NIC, and all other power options have ben set to "always on" (or the equivalent).
I upgraded to latest drivers from USR, but the problem persists. I also upgraded to service pack 4 of Win2k, but this didn't change anything.
Any ideas as to what could be causing this? It's not a major problem, but is very annoying - I keep seeing the connection becoming re-established and a pop-up information text every 5 mins - it is driving me crazy!
Cheers,
Dan.

Need audio and modem drivers for Tecra A6

Hi there,
I couldn't find the drivers (audio+modem) Tecra A6 EZ6411 for WXP SP2.

Hi
and why you dont visit the Toshiba driver page and download the right drivers???
The Toshiba driver page provides XP drivers for Tecra A6 PTA60E and for Tecra A6 PTA61E.
If you dont know what Tecra you exactly have please check the label at the bottom of the unit!!!!
I hope and think that everything is clear now.
Have a nice day ;)

Need SATA AHCI driver/controller for Stream c004tu

Hello, I need the SATA AHCI driver/controller for Stream c004tu. Please help!

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Stream 13-c004tu Notebook and needing the SATA AHCI driver/controller for Windows 8.1. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. Here is a link to your drivers product page. The Intel information is in the section marked Driver-Chipset. I hope this helps. Thanks.

Need a display driver (s3) for Tecra 8100

Similar Messages

Maybe you are looking for