Need a doc for all the oracle built-ins
hai, wouldn't it be great if we had a single document tht listed the syntax and examples of all the built-ins by oracle (forms & reports). do we have a document like tht ? just a suggestion.
thx and regards, rehan.
Hi Rehan,
Again, apologies for the delay in responding to you.
The Application Server 10g documentation page lists a specific Documentation library entitled "Oracle Application Server 10g Forms and Reports Services Online Documentation Library 10g (9.0.4)". You can view this library at: http://download.oracle.com/docs/cd/B13597_02/index.htm
If this does not contain the information you seek, please try another forum, e.g. the Member Feedback forum at: Community Feedback (No Product Questions)
Regards,
Les
Similar Messages
-
Greetings: I have multiple iPads and iPhones. I want all to be able to be able to stream to our Apple TV. All of the docs I see say you must have the same Apple ID for all the devices, but we each have our own Apple ID. Is this just a doc short coming?
You can each have your own ID for your own iTunes accounts, but in order for a device to stream via AirPlay to the same Apple TV, everything must use the same homesharing ID. This is not the same as your iTunes account ID (although it can be for one of the devices)
-
Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping ! Thx
Hi, how can I keep the same zoom level for all the pages I view in Safari and even when I close and open it. Indeed with a 27 inch Imac I have a lot of space, most of the websites are built for smaller resolutions and my sight is dropping ! Thx
-
Infotype screen headers needs to be changed for all the infotypes
Hi Guys,
This would be for a global implementation question.
For the US for a particular region, the screen header needs to be changed for all the infotypes.
The existing field (in the infotype header) is Employee Group which needs to be replaced with employment status.
The know how to change the headers but my question is STAT2 exists in IT 0000 but does not exist in 0001, 0002 0007.........etc
When i go to Table T588J to add an entry , Screen Header 42......,
I get an error " No Field STAT2 exists for infotype 0001"
No field STAT2 exists for infotype 0001.
Message no. PG811
Diagnosis
No STAT2 field exists for infotype 0001.
Procedure
Please contact your system administrator.
Procedure for System Administration
In Customizing, determine the incorrect entry in Personnel
Administration in the Header structure per infotype view, step " Determine infotype header and correct it
I would like to have some inputs from you guys ..... Any Suggessions...
Thanks,
AasthaHi Aastha,
Correct me if I am wrong.
First you need to maintain the header in T588J.
Screen header of an infotype is defined in view V_582A_B. We can define one screen header for employee and another for applicant in view V_T588I. The header modifier selected from view V_T588I has a definition in table T588J, which finally gets shown on the screen.
Depending on the transaction class (A = Personnel Administration, B = Recruitment) and the country grouping, a header modifier is assigned to the infotype header in the u201CHeader Modificationu201D view V_T588I.
For example like
Screen Header / Tr. Class / Header modifier
00 / A / 60
In the view u201CHeader Structure per Infotypeu201D (V_582A_B), a header has been assigned to every infotype. It also determines whether the data is valid from the system date or the start date of the infotype record
Hope this is useful.
Regards
RK -
Hi guys..!!
I would like to know if someone could help on this:
I just have a HP printer (HP Designjet 100) and for some reason I need to install a file for all the HP printers drivers in total 590MB to be able to use my printer in my mountain lion???
If normally the size of my files in the for previous software was more or less 5MB why now i need to install 590?
Some one could help me how to avoid installation of 590MB for my new mountain lion software???
ThanksIf you go to http://support.apple.com/downloads and locate the HP Printer Drivers installer, you will find that it is 473.4 MB (for version 2.11). If you install this, it will install the full set of drivers for every model of HP printer that is supported by the drivers distributed through Apple. The disk space occupied once installed will probably be larger than the download, since the downloaded file is compressed.
On the other hand, if you have an HP printer connected and you use Software Update (or the Update tab in App Store), that should offer you a much smaller set of HP drivers, which are only applicable to your printer (and possibly a few similar ones). These updates are typically only tens of megabytes rather than hundreds of megabytes.
If Software Update doesn't offer you any HP drivers then it either thinks you have the latest drivers installed already, or the printer model is not supported by the drivers available from Apple.
This article lists all of the printer models for which Apple distributes the driver:
http://support.apple.com/kb/HT3669 -
How to create a global property for all the reports in Oracle BIP
Hi,
I am a new guy to Oracle BIP. I have a set of reports which is running perfectly. But now, I have to create a property something like this:
If(bproperty)
else
I do not want to have a property for each of the reports but this should be a global one for all the reports.
Please help. Your help is greatly appreciated :)
Thanks,
KarthikHi,
I am a new guy to Oracle BIP. I have a set of reports which is running perfectly. But now, I have to create a property something like this:
If(bproperty)
else
I do not want to have a property for each of the reports but this should be a global one for all the reports.
Please help. Your help is greatly appreciated :)
Thanks,
Karthik -
Need to checks if ASN has been received for all the materials in the
Hi Experts,
Can you please give me an idea
I need checks if ASN has been received for all the materials in the Invoice.
what filed do i need to check.
Regd's
Vardesh,Hi Jagadeeswari,
If you need to check Workflow Trace check Transaction SWU9. This displays all the WOrkflow started on a particular time period we specify. Check Program RSWTTR01 and also table SWT_LOGCAT which could help you. The transaction i have specified displays all the Workflow that has been executed and whether it is been a success or a failure.
Hope this would help you.
Thanks,
Prashanth -
Process for taking the Oracle 9.2.0.5 backup on solaris
Hi All,
Thanks for you support.
Please help me on this
Process for taking the Oracle 9.2.0.5 backup on solarisi am new to DBA activity's. that's why i am looking
for guidence, to take the oracle 9.2.0.5 backup on
solaris.Still please be specific what's your problem is.
Is your database down you can't get it startup ,
or your database is crashed you need to recover it?
Define 'backup'
At least tell us what you did and what you didn't, if you have no clue what's going on check Oracle document,
http://download.oracle.com/docs/cd/B19306_01/server.102/b14196/toc.htm -
I am working on FLEX 4.6 SDK it provides 35 components with built in accessibility support. My Application contains some components which have no built in accessibility support but I need to provide accessibility support for those components too. I have gone through the Flex docs to customize the non accessible components to support accessibility feature, But the docs where not clear. To customize a single component I have to overwrite lot of code in SDK level.
and it takes lot of effort.
So, I would like to use FLEX component libraries which provides accessibility support for all the component.
Could you please guide me how can I provide accessibility support for other components with out putting more effort on it.
Thanks in advance...There is already such thing in myfaces called "security context" [1]. You could find build of sandbox.jar [2]
[1] http://myfaces.apache.org/sandbox/securityContext.html
[2] http://people.apache.org/builds/myfaces/nightly/ -
Change the Page Title for all the pages when viewing the Reports in Bi Publisher
Hello ,
I have a requirement for changing the Page Title for all the report displayed pages on the browser window.As far as I know, answer is NO.
it's very simple answer Manikandan-S-Oracle
for 1210326 's requirements there are some places for changes of property "title" and in some pages "title" can be different
"one place or option for changing" does not exist imho ( may be i'm wrong )
so you can change places for your needs but not sure what it's adequate
as example
...wls\user_projects\applications\bipdomain\xmlpserver\catalog\navigator.jsp --> find <title>
it changes title in http://somehost:7001/xmlpserver/servlet/catalog
... wls\user_projects\applications\bipdomain\xmlpserver\home\home.jsp --> find <title>
it changes title in http://somehost:7001/xmlpserver/servlet/home -
How to set up same timezone in BI Publisher for all the USERS?
Hi Experts,
My OBIEE version is 11.1.1.6.6 and any user can go into the My Account and then preferences and set the timezone.
But as an admin, i see they are too many users and wanted to setup common timezone for all of them.
How do i setup common timezone in BI Publisher for all the users?
Thanks
AshishCheck
Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go -
Recordcount for all the tables in my user
How I will get recordcount for all the tables in my user
with a single query??
Plz help.
Thanx in advance.Not possible. As there can be any number of tables with any names, this requires dynamic SQL.
SQL given to the Oracle SQL Engine cannot be dynamic ito scope and references - it must be static. For example, one cannot do this:
SELECT count(*) FROM :table
For the SQL Engine to parse the SQL, determine if it is valid, determine the scope and security, determine an execution plan, it needs to know the actual object names. Objects like tables and columns and functions cannot be variable.
You will therefore need to write a user function (in PL/SQL) that dynamically creates a [SELECT COUNT] SQL for a table, execute that SQL and return the row count - and then use SQL to iterate through USER_TABLES for example and sum the results of this function.
Note that object tables are not listed in USER_TABLES - thus a more comprehensive list of all table objects in your schema can be found in USER_OBJECTS. -
DCIteratorBinding setting the same value for all the rows.
Hi all,
I have table with on of the column as id. I have made the id column as the hyper link , that takes me to the next page. I am trying to pass the id to the next page. I am using the managed bean for the same. The below code is used to create the link on the column. It sets the action to the function in the bean that sets the id as of the current row.
<tr:column sortProperty="id" sortable="false"
headerText="#{bindings.notification.hints.id.label}"
id="c4">
<tr:commandLink action="choice" text="#{row.bindings.id.inputValue}"
id="cl1" actionListener="#{IdBean.extractID}">
</tr:commandLink>
</tr:column>
below is the IdBean.extratctID()
public void extractID(ActionEvent actionEvent){
BindingContext bindingContext = BindingContext.getCurrent();
BindingContainer bindings;
bindings = bindingContext.getCurrentBindingsEntry();
DCIteratorBinding iter;
iter = (DCIteratorBinding) bindings.get("notificationIterator");
Row rw;
rw = iter.getCurrentRow();
String id;
id = (String) rw.getAttribute("id");
this.setId2(id);
I am printing the id value on to the next page. But its just returning the vslue of the id for the first row for all the rows of the table.
Any inputs as in do i need to refresh the iterator or something like that.
Reagrds
SishantHi,
Following is the code i have added in my bean
ValueExpression expression = getFacesContext().getApplication().getExpressionFactory().createValueExpression(getFacesContext().getELContext(), "#{pageFlowScope.emp1}", Object.class);
Object id = expression.getValue(getFacesContext().getELContext());
public FacesContext getFacesContext() {
return FacesContext.getCurrentInstance();
JSPX Code -
<af:commandImageLink id="DuncanAngove"
icon="/john.gif" partialSubmit="true"
actionListener="#{Tweets.setEmployeeId}">
<af:setActionListener from="Duncan Angove" to="#{pageFlowScope.emp1}" />
But i am getting NullPointerException. I have tried it with application and request scope as well.
javax.servlet.ServletException
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:277)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:138)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.NullPointerException
at org.apache.myfaces.trinidad.component.UIXComponentBase.getValueExpression(UIXComponentBase.java:231)
at project1.Tweets.setEmployeeId(Tweets.java:40)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1259)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:698)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:285)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
... 35 more
Thanks
Sishant -
Needed sample program for emailing the report output
hi all,
neede sample program for emailing the report outputHi,
Please refer this program for sending e-mail with attachment.
***INCLUDE ZHZLPP_CLZSN_DAILY_MIS_PRINT .
*& Form print
* text
* --> p1 text
* <-- p2 text
FORM print .
DATA: wa_output_options TYPE ssfcompop,
wa_control_parameters TYPE ssfctrlop,
t_otfdata TYPE ssfcrescl,
t_pdf_tab TYPE TABLE OF tline WITH HEADER LINE.
DATA: t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE.
DATA: w_filesize TYPE i.
DATA: w_bin_filesize TYPE i.
DATA: i_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
i_tline TYPE TABLE OF tline WITH HEADER LINE,
v_form_name TYPE rs38l_fnam,
v_len_in LIKE sood-objlen,
w_return TYPE ssfcrescl.
DATA : l_mean TYPE p DECIMALS 2,
l_mean1 TYPE p DECIMALS 2,
l_mean2 TYPE p DECIMALS 2,
l_mean3 TYPE p DECIMALS 4,
temp TYPE p DECIMALS 2,
v_header LIKE zmisdisp3-remark,
disp_d_kwh_mt TYPE zmisdisp5,
disp_m_kwh_mt TYPE zmisdisp5,
disp_d_mt_mw TYPE zmisdisp5,
disp_m_mt_mw TYPE zmisdisp5,
l_bptarget(16) TYPE p DECIMALS 2,
l_act_d(16) TYPE p DECIMALS 2,
l_act_c(16) TYPE p DECIMALS 2,
l_pow_gen TYPE p DECIMALS 2,
l_pow_gen_d TYPE p DECIMALS 2,
l_pow_gen_c TYPE p DECIMALS 2,
l_no_of_days TYPE p,
disp_bptarget TYPE zmisdisp5,
disp_act_d TYPE zmisdisp5,
disp_act_c TYPE zmisdisp5,
disp_d_kwh TYPE zmisdisp5,
disp_c_kwh TYPE zmisdisp5,
disp_d_mw TYPE zmisdisp5,
disp_c_mw TYPE zmisdisp5,
disp_pow_gen_d TYPE zmisdisp5,
disp_pow_gen_c TYPE zmisdisp5,
disp_pow_gen TYPE zmisdisp5,
disp_ftd_h1 TYPE zmisdisp5,
disp_ftd_h2 TYPE zmisdisp5,
disp_ftd_h3 TYPE zmisdisp5,
disp_ftd_h4 TYPE zmisdisp5,
disp_ftd_h5 TYPE zmisdisp5,
disp_ftd_o1 TYPE zmisdisp5,
disp_ftd_o2 TYPE zmisdisp5,
disp_ftd_o4 TYPE zmisdisp5,
disp_ftd_o5 TYPE zmisdisp5,
disp_***_o1 TYPE zmisdisp5,
disp_***_o2 TYPE zmisdisp5,
disp_***_o4 TYPE zmisdisp5,
disp_***_o5 TYPE zmisdisp5,
disp_cath_d TYPE zmisdisp5,
disp_cath_c TYPE zmisdisp5,
disp_anode_d TYPE zmisdisp5,
disp_anode_c TYPE zmisdisp5,
l_rec_con_d_kwh(16) TYPE p DECIMALS 2,
l_rec_con_c_kwh(16) TYPE p DECIMALS 2,
l_rec_con_d_mw(16) TYPE p DECIMALS 2,
l_rec_con_c_mw(16) TYPE p DECIMALS 2,
tot_kah TYPE p DECIMALS 2,
avg_kah TYPE p DECIMALS 2,
disp_tot_kah TYPE zmisdisp5,
disp_avg_kah TYPE zmisdisp5,
v_ftd_h1 TYPE p DECIMALS 2,
v_ftd_h2 TYPE p DECIMALS 2,
v_ftd_h3 TYPE p DECIMALS 2,
v_ftd_h4 TYPE p DECIMALS 2,
v_ftd_h5 TYPE p DECIMALS 2,
v_ftd_o1 TYPE p DECIMALS 2,
v_ftd_o2 TYPE p DECIMALS 2,
v_ftd_o4 TYPE p DECIMALS 2,
v_ftd_o5 TYPE p DECIMALS 2,
v_***_o1 TYPE p DECIMALS 2,
v_***_o2 TYPE p DECIMALS 2,
v_***_o4 TYPE p DECIMALS 2,
v_***_o5 TYPE p DECIMALS 2,
l_cdiff1 LIKE imrg-cdiff,
l_cdiff2 LIKE imrg-cdiff,
l_cdiff3 LIKE imrg-cdiff,
l_cdiff4 LIKE imrg-cdiff,
l_path LIKE rlgrap-filename,
l_flag.
DATA :prod_disp TYPE TABLE OF zmisdisp1 WITH HEADER LINE,
keyp_disp TYPE TABLE OF zmisdisp2 WITH HEADER LINE,
keyp_dis1 TYPE TABLE OF zmisdisp2 WITH HEADER LINE,
rmat_disp TYPE TABLE OF zmisdisp4 WITH HEADER LINE,
rcur_disp TYPE TABLE OF zmisdisp6 WITH HEADER LINE,
rhrs_disp TYPE TABLE OF zmisdisp4 WITH HEADER LINE,
brkd_disp TYPE TABLE OF zmisdisp7 WITH HEADER LINE.
DEFINE fill_kpp.
clear l_flag.
loop at it_mic_data where kurztext = &1.
l_mean1 = it_mic_data-mittelwert.
l_mean = it_mic_data-mean.
if l_flag = ' '.
move : &2 to keyp_disp-desc,
l_mean1 to keyp_disp-ftd.
if it_mic_data-kurztext = 'Ingot Pb SHG Zinc'.
l_mean2 = v_mean_pbshg.
move l_mean2 to keyp_disp-avg.
elseif it_mic_data-kurztext = 'Ingot Cu SHG Zinc'.
l_mean2 = v_mean_cushg.
move l_mean2 to keyp_disp-avg.
elseif it_mic_data-kurztext = 'Ingot Cd SHG Zinc'.
l_mean2 = v_mean_cdshg.
move l_mean2 to keyp_disp-avg.
elseif it_mic_data-kurztext = 'Ingot Fe SHG Zinc'.
l_mean2 = v_mean_feshg.
move l_mean2 to keyp_disp-avg.
elseif it_mic_data-kurztext = 'Ingot Zn SHG Zinc'.
l_mean2 = v_mean_znshg.
move l_mean2 to keyp_disp-avg.
else.
move l_mean to keyp_disp-avg.
endif.
if it_mic_data-masseinhsw = 'GLI'.
move 'g/l' to keyp_disp-unit.
elseif it_mic_data-masseinhsw = 'PPM'.
move 'ppm' to keyp_disp-unit.
elseif it_mic_data-masseinhsw = 'NO'.
move 'no' to keyp_disp-unit.
else.
move it_mic_data-masseinhsw to keyp_disp-unit.
endif.
append keyp_disp.
clear keyp_disp.
move 'X' to l_flag.
else.
move : l_mean1 to keyp_disp-ftd.
append keyp_disp.
clear keyp_disp.
endif.
endloop.
if sy-subrc is not initial.
move &2 to keyp_disp-desc.
append keyp_disp.
clear keyp_disp.
endif.
END-OF-DEFINITION.
DEFINE fill_kp1.
clear l_flag.
loop at it_mic_data where kurztext = &1.
l_mean1 = it_mic_data-mittelwert.
l_mean = it_mic_data-mean.
if l_flag = ' '.
move : &2 to keyp_dis1-desc,
l_mean1 to keyp_dis1-ftd.
if it_mic_data-kurztext = 'Ingot Pb SHG Zinc'.
l_mean2 = v_mean_pbshg.
move l_mean2 to keyp_dis1-avg.
elseif it_mic_data-kurztext = 'Ingot Cu SHG Zinc'.
l_mean2 = v_mean_cushg.
move l_mean2 to keyp_dis1-avg.
elseif it_mic_data-kurztext = 'Ingot Cd SHG Zinc'.
l_mean2 = v_mean_cdshg.
move l_mean2 to keyp_dis1-avg.
elseif it_mic_data-kurztext = 'Ingot Fe SHG Zinc'.
l_mean2 = v_mean_feshg.
move l_mean2 to keyp_dis1-avg.
elseif it_mic_data-kurztext = 'Ingot Zn SHG Zinc'.
l_mean3 = v_mean_znshg.
move l_mean3 to keyp_dis1-avg.
clear l_mean3.
l_mean3 = it_mic_data-mittelwert.
move l_mean3 to keyp_dis1-ftd.
else.
move l_mean to keyp_dis1-avg.
endif.
if it_mic_data-masseinhsw = 'GLI'.
move 'g/l' to keyp_dis1-unit.
elseif it_mic_data-masseinhsw = 'PPM'.
move 'ppm' to keyp_dis1-unit.
elseif it_mic_data-masseinhsw = 'NO'.
move 'no' to keyp_dis1-unit.
else.
move it_mic_data-masseinhsw to keyp_dis1-unit.
endif.
append keyp_dis1.
clear keyp_dis1.
move 'X' to l_flag.
else.
if it_mic_data-kurztext = 'Ingot Zn SHG Zinc'.
clear l_mean3.
l_mean3 = it_mic_data-mittelwert.
move l_mean3 to keyp_dis1-ftd.
else.
move : l_mean1 to keyp_dis1-ftd.
endif.
append keyp_dis1.
clear keyp_dis1.
endif.
endloop.
if sy-subrc is not initial.
move &2 to keyp_dis1-desc.
append keyp_dis1.
clear keyp_dis1.
endif.
END-OF-DEFINITION.
*FIRST PAGE
********PLANT HEADER
MOVE 'CLZS HYDRO I PLANT - DAILY PRODUCTION REPORT' TO v_header.
********Production figure
LOOP AT it_disp1.
prod_disp-desc = it_disp1-desc.
prod_disp-d_plnmg = it_disp1-d_plnmg.
prod_disp-d_menge = it_disp1-d_menge.
prod_disp-u_plnmg = it_disp1-u_plnmg.
prod_disp-u_menge = it_disp1-u_menge.
prod_disp-avg = it_disp1-avg.
prod_disp-ask_rate = it_disp1-ask_rate.
prod_disp-m_plnmg = it_disp1-m_plnmg.
prod_disp-y_plnmg = it_disp1-y_plnmg.
prod_disp-y_menge = it_disp1-y_menge.
prod_disp-y_variance = it_disp1-y_variance.
APPEND prod_disp.
ENDLOOP.
********Key performance parameters
MOVE 'ROASTER :' TO keyp_disp-desc.
APPEND keyp_disp.
fill_kpp '% S/S IN 45 DEG' ' S/S in Calcine'.
MOVE 'LEACHING :' TO keyp_disp-desc.
APPEND keyp_disp.
fill_kpp '% S/S IN CAL' ' S/S in Calcine'.
fill_kpp '%water soluble Zn' ' W/S Zn in Jarosite Cake'.
fill_kpp '%total Zn in HBF' ' T/Zn in Jarosite cake'.
fill_kpp 'ZINC IN CT' ' Zn in Conditioning tank'.
fill_kpp 'g/l zn in neutral overflow' ' Zn in Electrolyte Prod (gpl)'.
fill_kpp 'PPM CU IN PS25' ' Purified Solution Cu'.
fill_kpp 'PPM CADMIUM IN PS25' ' Purified Solution Cd'.
fill_kpp 'PPM COBALT IN PS25' ' Purified Solution Co'.
MOVE 'CELLHOUSE :' TO keyp_disp-desc.
APPEND keyp_disp.
fill_kpp 'g/l zinc in cell feed' ' Cell Feed Zinc gpl'.
fill_kpp 'GPL ACID IN CELL FEED' ' Cell Feed acidity gpl'.
fill_kpp 'g/l manganese in cell feed' ' Cell Feed Mn gpl'.
LOOP AT t_imrg_add_disp.
MOVE: t_imrg_add_disp-desc TO keyp_disp-desc,
t_imrg_add_disp-d_value TO keyp_disp-ftd,
t_imrg_add_disp-c_value TO temp,
temp TO keyp_disp-avg.
IF t_imrg_add_disp-units = 'NO'.
MOVE: 'no' TO keyp_disp-unit.
ELSE.
MOVE: t_imrg_add_disp-units TO keyp_disp-unit.
ENDIF.
APPEND keyp_disp.CLEAR keyp_disp.
ENDLOOP.
fill_kp1 'Ingot Pb SHG Zinc' ' Ingot Pb SHG Zinc'.
fill_kp1 'Ingot Cu SHG Zinc' ' Ingot Cu SHG Zinc'.
fill_kp1 'Ingot Cd SHG Zinc' ' Ingot Cd SHG Zinc'.
fill_kp1 'Ingot Fe SHG Zinc' ' Ingot Fe SHG Zinc'.
fill_kp1 'Ingot Zn SHG Zinc' ' Ingot Zn SHG Zinc'.
********Cellhouse power
CATCH SYSTEM-EXCEPTIONS bcd_zerodivide = 1.
v_m_kwh_mt = v_ind8_m / cathode_recipt.
v_m_mt_mw = cathode_recipt / ( v_ind8_m / 24000 ).
ENDCATCH.
MOVE : v_d_kwh_mt TO disp_d_kwh_mt,
v_m_kwh_mt TO disp_m_kwh_mt,
v_d_mt_mw TO disp_d_mt_mw,
v_m_mt_mw TO disp_m_mt_mw.
*SECOND PAGE
********Raw Material
LOOP AT it_disp3.
rmat_disp-desc = it_disp3-desc.
rmat_disp-opstk = it_disp3-opstk.
rmat_disp-d_recpt = it_disp3-d_recpt.
rmat_disp-u_recpt = it_disp3-u_recpt.
rmat_disp-d_cons = it_disp3-d_cons.
rmat_disp-u_cons = it_disp3-u_cons.
rmat_disp-clstk = it_disp3-clstk.
APPEND rmat_disp.
ENDLOOP.
********Work in Progress
********Finished Goods
********power consumption
l_no_of_days = v_mm_en_dt+6(2).
CATCH SYSTEM-EXCEPTIONS bcd_zerodivide = 1.
l_bptarget = ( v_bp_nrms_p * v_gross_d ) / l_no_of_days.
l_act_d = v_ind6_d + v_ind2_d - ( v_ind3_d + ( v_ind4_d / 2 ) ) - v_ind5_d.
l_act_c = v_ind6_m + v_ind2_m - ( v_ind3_m + ( v_ind4_m / 2 ) ) - v_ind5_m.
l_pow_gen = ( v_ind2_d / 1000 ) / v_ind7_d.
ENDCATCH.
l_pow_gen_d = v_ind2_d / 1000.
l_pow_gen_c = v_ind9_m / 1000.
l_rec_con_d_kwh = v_ind8_d.
l_rec_con_c_kwh = v_ind8_m.
l_rec_con_d_mw = v_ind8_d / 24000.
l_rec_con_c_mw = v_ind8_m / ( 24000 * v_days_pased ).
LOOP AT t_disp_curr.
rcur_disp-time = t_disp_curr-time.
rcur_disp-current = t_disp_curr-current.
rcur_disp-kah = t_disp_curr-kah.
APPEND rcur_disp.
AT LAST.
SUM.
tot_kah = t_disp_curr-kah.
ENDAT.
ENDLOOP.
avg_kah = tot_kah / '24'.
*********************running hrs
LOOP AT it_disp6.
rhrs_disp-desc = it_disp6-desc.
rhrs_disp-opstk = it_disp6-d_runhrs.
rhrs_disp-d_recpt = it_disp6-m_runhrs.
APPEND rhrs_disp.
ENDLOOP.
rhrs_disp-desc = 'Turbo Generator'.
rhrs_disp-opstk = v_turbod.
rhrs_disp-d_recpt = v_turboc.
INSERT rhrs_disp INDEX 2.
**********************BREAK_DOWN & OIL
CLEAR value.
LOOP AT itab2.
IF itab2-equnr = 'NMZ-EH01G001'.
PERFORM s_conversion_h.
v_ftd_h1 = v_ftd_h1 + value.
CLEAR value.
ENDIF.
IF itab2-equnr = 'NMZ-EH01G002'.
PERFORM s_conversion_h.
v_ftd_h2 = v_ftd_h2 + value.
CLEAR value.
ENDIF.
IF itab2-equnr = 'NMZ-EH01V003'.
PERFORM s_conversion_h.
v_ftd_h3 = v_ftd_h3 + value.
CLEAR value.
ENDIF.
IF itab2-equnr = 'NMZ-EH01V001'.
PERFORM s_conversion_h.
v_ftd_h4 = v_ftd_h4 + value.
CLEAR value.
ENDIF.
IF itab2-equnr = 'NMZ-EH01V002'.
PERFORM s_conversion_h.
v_ftd_h5 = v_ftd_h5 + value.
CLEAR value.
ENDIF.
ENDLOOP.
LOOP AT t_oil.
AT END OF ind.
SUM.
IF t_oil-ind = 1.
v_***_o1 = t_oil-cdiff * 1000.
ELSEIF t_oil-ind = 2.
v_***_o2 = t_oil-cdiff * 1000.
ELSEIF t_oil-ind = 3.
v_***_o4 = t_oil-cdiff * 1000.
ELSEIF t_oil-ind = 4.
v_***_o5 = t_oil-cdiff * 1000.
ENDIF.
ENDAT.
IF t_oil-idate = p_repdt.
IF t_oil-ind = 1.
l_cdiff1 = l_cdiff1 + t_oil-cdiff.
ELSEIF t_oil-ind = 2.
l_cdiff2 = l_cdiff2 + t_oil-cdiff.
ELSEIF t_oil-ind = 3.
l_cdiff3 = l_cdiff3 + t_oil-cdiff.
ELSEIF t_oil-ind = 4.
l_cdiff4 = l_cdiff4 + t_oil-cdiff.
ENDIF.
ENDIF.
ENDLOOP.
v_ftd_o1 = l_cdiff1 * 1000.
v_ftd_o2 = l_cdiff2 * 1000.
v_ftd_o4 = l_cdiff3 * 1000.
v_ftd_o5 = l_cdiff4 * 1000.
*********Breakdown details----3rd page
LOOP AT itab INTO wa.
CALL FUNCTION 'FLTP_CHAR_CONVERSION'
EXPORTING
decim = 0
expon = 0
input = wa-auszt
ivalu = 'X'
IMPORTING
flstr = wk_char_auszt.
CONDENSE wk_char_auszt NO-GAPS.
wk_flt_auszt = wk_char_auszt.
wk_flt_auszt = wk_flt_auszt / 3600.
duration = wk_flt_auszt.
brkd_disp-eqdesc = wa-eqktx.
brkd_disp-nodesc = wa-qmtxt.
brkd_disp-hrs = duration.
APPEND brkd_disp.
ENDLOOP.
MOVE : v_ftd_h1 TO disp_ftd_h1,
v_ftd_h2 TO disp_ftd_h2,
v_ftd_h3 TO disp_ftd_h3,
v_ftd_h4 TO disp_ftd_h4,
v_ftd_h5 TO disp_ftd_h5,
v_ftd_o1 TO disp_ftd_o1,
v_ftd_o2 TO disp_ftd_o2,
v_ftd_o4 TO disp_ftd_o4,
v_ftd_o5 TO disp_ftd_o5,
v_***_o1 TO disp_***_o1,
v_***_o2 TO disp_***_o2,
v_***_o4 TO disp_***_o4,
v_***_o5 TO disp_***_o5,
l_bptarget TO disp_bptarget,
l_act_d TO disp_act_d,
l_act_c TO disp_act_c,
l_rec_con_d_kwh TO disp_d_kwh,
l_rec_con_c_kwh TO disp_c_kwh,
l_rec_con_d_mw TO disp_d_mw,
l_rec_con_c_mw TO disp_c_mw,
tot_kah TO disp_tot_kah,
avg_kah TO disp_avg_kah,
l_pow_gen TO disp_pow_gen,
l_pow_gen_d TO disp_pow_gen_d,
l_pow_gen_c TO disp_pow_gen_c,
v_cath_d TO disp_cath_d,
v_cath_c TO disp_cath_c,
v_anode_d TO disp_anode_d,
v_anode_c TO disp_anode_c.
wa_output_options-tdimmed = 'X'.
wa_control_parameters-device = 'PRINTER'.
wa_control_parameters-preview = 'X'.
IF rb3 = 'X'.
wa_control_parameters-getotf = 'X'.
wa_control_parameters-no_dialog = 'X'.
ENDIF.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZHZLPP_CLZSN_DAILY_MIS'
IMPORTING
fm_name = v_form_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
ENDIF.
CALL FUNCTION v_form_name
EXPORTING
control_parameters = wa_control_parameters
output_options = wa_output_options
user_settings = 'X'
header = v_header
date = p_repdt
l_bptarget = disp_bptarget
l_act_d = disp_act_d
l_act_c = disp_act_c
disp_d_kwh = disp_d_kwh
disp_c_kwh = disp_c_kwh
disp_d_mw = disp_d_mw
disp_c_mw = disp_c_mw
disp_tot_kah = disp_tot_kah
disp_avg_kah = disp_avg_kah
disp_d_kwh_mt = disp_d_kwh_mt
disp_m_kwh_mt = disp_m_kwh_mt
disp_d_mt_mw = disp_d_mt_mw
disp_m_mt_mw = disp_m_mt_mw
disp_pow_gen = disp_pow_gen
disp_pow_gen_d = disp_pow_gen_d
disp_pow_gen_c = disp_pow_gen_c
disp_ftd_h1 = disp_ftd_h1
disp_ftd_h2 = disp_ftd_h2
disp_ftd_h3 = disp_ftd_h3
disp_ftd_h4 = disp_ftd_h4
disp_ftd_h5 = disp_ftd_h5
disp_ftd_o1 = disp_ftd_o1
disp_ftd_o2 = disp_ftd_o2
disp_ftd_o4 = disp_ftd_o4
disp_ftd_o5 = disp_ftd_o5
disp_***_o1 = disp_***_o1
disp_***_o2 = disp_***_o2
disp_***_o4 = disp_***_o4
disp_***_o5 = disp_***_o5
disp_cath_d = disp_cath_d
disp_cath_c = disp_cath_c
disp_anode_d = disp_anode_d
disp_anode_c = disp_anode_c
IMPORTING
job_output_info = w_return " .
TABLES
prod_tab = prod_disp
keyp_tab = keyp_disp
remk_tab = it_remarks
rmat_tab = rmat_disp
rwip_tab = it_disp4
rfng_tab = it_disp_fg
rcur_tab = rcur_disp
rhrs_tab = rhrs_disp
brkd_tab = brkd_disp
keyp_tab1 = keyp_dis1
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE 'Error in printing form' TYPE 'I'.
ENDIF.
********Downloading in pdf format.
IF rb3 = 'X'.
IF l_usract <> 9.
MOVE fullpath TO l_path.
i_otf[] = w_return-otfdata[].
CALL FUNCTION 'CONVERT_OTF' "
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = v_len_in
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc <> 0.
ENDIF.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
bin_filesize = v_len_in
filename = l_path
filetype = 'BIN'
IMPORTING
filelength = w_filesize
TABLES
data_tab = i_tline
EXCEPTIONS
file_open_error = 1
file_write_error = 2
invalid_filesize = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc = 0.
MESSAGE 'File downloaded successfully' TYPE 'S'.
ENDIF.
ENDIF.
ENDIF.
IF sy-batch = 'X'. " SENDING MAILS IF SCHEDULED IN BACKGROUND
DATA: formname TYPE tdsfname,
fm_name TYPE rs38l_fnam,
control_parameters TYPE ssfctrlop,
output_options TYPE ssfcompop,
job_output_info TYPE ssfcrescl,
otf_data TYPE tsfotf.
DATA: otf TYPE TABLE OF itcoo WITH HEADER LINE,
doctab_archive TYPE TABLE OF docs WITH HEADER LINE,
lines TYPE TABLE OF tline WITH HEADER LINE,
bin_filesize TYPE i.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'ZHZLPP_CLZSN_DAILY_MIS'
IMPORTING
fm_name = v_form_name
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
ENDIF.
control_parameters-no_dialog = 'X'.
control_parameters-getotf = 'X'.
CALL FUNCTION v_form_name
EXPORTING
control_parameters = control_parameters
header = v_header
date = p_repdt
l_bptarget = disp_bptarget
l_act_d = disp_act_d
l_act_c = disp_act_c
disp_d_kwh = disp_d_kwh
disp_c_kwh = disp_c_kwh
disp_d_mw = disp_d_mw
disp_c_mw = disp_c_mw
disp_tot_kah = disp_tot_kah
disp_avg_kah = disp_avg_kah
disp_d_kwh_mt = disp_d_kwh_mt
disp_m_kwh_mt = disp_m_kwh_mt
disp_d_mt_mw = disp_d_mt_mw
disp_m_mt_mw = disp_m_mt_mw
disp_pow_gen = disp_pow_gen
disp_pow_gen_d = disp_pow_gen_d
disp_pow_gen_c = disp_pow_gen_c
disp_ftd_h1 = disp_ftd_h1
disp_ftd_h2 = disp_ftd_h2
disp_ftd_h3 = disp_ftd_h3
disp_ftd_h4 = disp_ftd_h4
disp_ftd_h5 = disp_ftd_h5
disp_ftd_o1 = disp_ftd_o1
disp_ftd_o2 = disp_ftd_o2
disp_ftd_o4 = disp_ftd_o4
disp_ftd_o5 = disp_ftd_o5
disp_***_o1 = disp_***_o1
disp_***_o2 = disp_***_o2
disp_***_o4 = disp_***_o4
disp_***_o5 = disp_***_o5
disp_cath_d = disp_cath_d
disp_cath_c = disp_cath_c
disp_anode_d = disp_anode_d
disp_anode_c = disp_anode_c
IMPORTING
job_output_info = job_output_info
TABLES
prod_tab = prod_disp
keyp_tab = keyp_disp
remk_tab = it_remarks
rmat_tab = rmat_disp
rwip_tab = it_disp4
rfng_tab = it_disp_fg
rcur_tab = rcur_disp
rhrs_tab = rhrs_disp
brkd_tab = brkd_disp
keyp_tab1 = keyp_dis1
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc = 0.
otf_data = job_output_info-otfdata[].
CALL FUNCTION 'CONVERT_OTF_2_PDF'
IMPORTING
bin_filesize = bin_filesize
TABLES
otf = otf_data[]
doctab_archive = doctab_archive[]
lines = lines[]
EXCEPTIONS
err_conv_not_possible = 1
err_otf_mc_noendmarker = 2
OTHERS = 3.
IF sy-subrc = 0.
SUBMIT rsconn01 with mode = 'INT' AND RETURN.
* ----<<distrubution list>>----
PERFORM mail_users TABLES lines USING 'MIS-HY1A' v_header. " Donot put more than 8 email-ids
PERFORM mail_users TABLES lines USING 'MIS-HY1B' v_header. " in a distribution list
PERFORM mail_users TABLES lines USING 'MIS-HY1C' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1D' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1E' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1F' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1G' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1H' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1I' v_header.
PERFORM mail_users TABLES lines USING 'MIS-HY1J' v_header.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " print
*& Form get_download_path
* text
* --> p1 text
* <-- p2 text
FORM get_download_path .
CALL FUNCTION 'GUI_FILE_SAVE_DIALOG'
EXPORTING
window_title = 'Download as pdf file'
default_extension = 'pdf'
IMPORTING
fullpath = fullpath
user_action = l_usract.
IF l_usract = '9'.
STOP.
ENDIF.
ENDFORM. " get_download_path
*& Form mail_users
* text
* -->P_LINES text
* -->P_2153 text
* -->P_V_HEADER text
FORM mail_users TABLES p_lines STRUCTURE tline
USING p_dist_list
p_v_header.
CONSTANTS: c_raw TYPE so_obj_tp VALUE 'RAW',
c_pdf TYPE so_obj_tp VALUE 'PDF',
c_255 TYPE i VALUE 255,
c_134 TYPE i VALUE 134,
c_x TYPE c VALUE 'X'.
DATA: document_data LIKE sodocchgi1 ,
tab_lines TYPE i,
contents_txt TYPE TABLE OF solisti1 WITH HEADER LINE,
contents_bin TYPE TABLE OF solisti1 WITH HEADER LINE,
packing_list TYPE TABLE OF sopcklsti1 WITH HEADER LINE,
object_header TYPE TABLE OF solisti1 WITH HEADER LINE,
receivers TYPE TABLE OF somlreci1 WITH HEADER LINE,
l_str(255) ,
v1 TYPE i,
v2 TYPE i,
v3 TYPE i.
document_data-obj_name = 'EMAIL'.
document_data-obj_descr = p_v_header. " SUBJECT LINE
CONCATENATE 'Please find the attached SAP generated Daily Production Report for the day'
p_repdt+6(2)
p_repdt+4(2)
'.' p_repdt+0(4)
INTO contents_txt.
APPEND contents_txt.
CLEAR contents_txt.
APPEND contents_txt.
APPEND contents_txt.
DESCRIBE TABLE contents_txt LINES tab_lines.
READ TABLE contents_txt INDEX tab_lines.
document_data-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( contents_txt ).
document_data-doc_size = tab_lines .
CLEAR packing_list-transf_bin.
packing_list-head_start = 1.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = tab_lines.
packing_list-doc_type = c_raw.
packing_list-doc_size = document_data-doc_size.
APPEND packing_list.
LOOP AT p_lines.
CLEAR l_str.
l_str+0(2) = p_lines-tdformat.
l_str+2(132) = p_lines-tdline.
v2 = v1 + c_134.
IF v2 LE c_255.
contents_bin-line+v1(c_134) = l_str. v1 = v2.
ELSE.
v3 = v2 - c_255.
v2 = c_255 - v1.
IF NOT v2 IS INITIAL.
contents_bin-line+v1(v2) = l_str+0(v2).
ENDIF.
APPEND contents_bin.
CLEAR contents_bin.
v1 = v3.
v3 = 134 - v1.
IF NOT v1 IS INITIAL.
contents_bin-line+0(v1) = l_str+v3(v1).
ENDIF.
ENDIF.
ENDLOOP.
APPEND contents_bin.
CLEAR contents_bin.
DESCRIBE TABLE contents_bin LINES tab_lines.
READ TABLE contents_bin INDEX tab_lines.
CONCATENATE 'Hy-I Report'
p_repdt+6(2)
p_repdt+4(2)
'.' p_repdt+0(4)
'.pdf'
INTO object_header.
APPEND object_header.
packing_list-transf_bin = c_x.
packing_list-head_start = 1.
packing_list-head_num = 1.
packing_list-body_start = 1.
packing_list-body_num = tab_lines.
packing_list-doc_type = c_pdf.
packing_list-obj_name = 'text1'.
packing_list-obj_descr = 'Production report'.
packing_list-doc_size = tab_lines * 255 + STRLEN( contents_bin ).
APPEND packing_list.
receivers-receiver = p_dist_list.
receivers-rec_type = 'C'.
APPEND receivers.
CLEAR receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = document_data
put_in_outbox = ' '
SENDER_ADDRESS = 'CZPPPLG'
SENDER_ADDRESS_TYPE = 'B'
commit_work = 'X'
TABLES
packing_list = packing_list
object_header = object_header
contents_bin = contents_bin
contents_txt = contents_txt
receivers = receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc = 0.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 with mode = 'INT' AND RETURN.
ENDIF.
ENDFORM. " mail_users -
Getting control totals for all the objects
Hi All,
1. I want to get the control totals for all the tables along with table names in Oracle
the below I google and found, but I am not aware of xml in Oracle, I tested this on small scott db it works fine
select
table_name,
to_number(
extractvalue(
xmltype(
dbms_xmlgen.getxml('select count(*) c from '||table_name)
),'/ROWSET/ROW/C')) count
from user_tables order by 1is the above query correct?
2. I want all the view name
This I can get it from user_views ( but I want for entire database excluding system views and only user created views)
select view_name from user_objects3. I want all the sporc name( including the ones in the package and stand alone)
I am not sure how to get this.Be aware of the statement "Some columns in these views contain statistics that are generated by the DBMS_STATS package or ANALYZE statement."
See this page specially "Columns marked with an asterisk (*) are populated only if you collect statistics on the table with the ANALYZE statement or the DBMS_STATS package."
http://download.oracle.com/docs/cd/E11882_01/server.112/e10820/statviews_2117.htm#REFRN20286
If your statistic is not updated, it can give you totally wrong impression.
Maybe you are looking for
-
How do I STOP a subscription renewal on an app?
My daughter deleted this Karaoke app, but i am getting charged every week on a subscription renewal. How do I suspend/ stop this charge from hitting my account every week? Thanks
-
[Solved]my netbook got stuck in rootfs after update (EEE PC 1005HA)
Hi guys!! So, yesterday i've updated the system. everything goes normal. today, when i turned it on, it got stuck in rootfs. i don't know what happened, if that behaviour is my fault or my system got crazy... i've searched about this problem but i fo
-
ABAP Proxy runtime is showing status as red
We have ABAP Proxy runtime for four different ABAP systems. Except one all the other three proxies are showing the status as red. Could you please help me with this regard - Points guaranteed
-
NetProtect Plus - User Manual?
Does anyone know where I can find a user guide/manual for NetProtect Plus? Every time I click on "Learn More", it just opens up a window with the BT website in it. It's clearly not working as intended because if you click on any links, the pages don
-
No matter what I've tried, every time I edit a photo and click done the application crashes. Doesn't matter what photo. Doesn't matter what I do to it. Any ideas? It's driving me crazy. FYI I've run disk util from the install disk, I've run fsck in s