Need a driver for HP 895Cse for windows 7

I have an HP 895 Cse printer. Yes it is an old printer but supper dependable and don't want to have to buy another. I have a desktop that has Win7 Home Premium 64-bit on it and I can install this printer on there. It will not install itself so I need a driver. I can go to drivers on the HP site but there isn't one listed for this version of Win7. I don't understand why I can't find one because I have a laptop with Win7 with the same operation system and the printer work on it fine. I really would appreciate some help with this. Is there a way to find the drive on my laptop and copy it? Thanks

The driver is delivered through Windows Update. There are a few things to try: start with the document here (the Deskjet 895cse and cxi use the same driver). If that does not resolve the issue the driver install wizard available from http://www.hp.com/go/tools may resolve the issue.
If the above do not help then try the following: click Start, Devices and Printers, Add a Printer, local printer, LPt1: (as a placeholder), Next, Windows Update and wait for the list to repopulate (this may take a few minutes). Once the list reappears click HP (not Hewlett-Packard) for the manufacturer and select the HP Deskjet 895cse driver, Next, Cancel. At this point you should be able to connect the USB cable and have the system automatically install the driver on the proper post.
If all the above fail (not likely) then post the details back here along with any error messages. It is also possible to download the driver normally delivered through Windows Update from the Microsoft Catalog site, but the steps are rather involved and I would rather not write them up unless needed.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

I need a drive and a VI for synchronous stepping motor.

The motor I have is a SLO-SYN Superior Electric (MO61-FD-6002). I need to write or find a VI that will help me step a grating back and forth slowly. Also I have no idea what kind of equipment or drives are required to do so. I would appreciate any help. If any other information is needed please email at [email protected]

Hi,National Instruments does provide add-on motion control tool kits for Labview. The detailed information can be found at:
http://sine.ni.com/apps/we/nioc.vp?lang=US&pc=mn&cid=1397
You can also choose to use the National Instruments Motion Controllers.
I also found previous discussions on the developer zone which are very helpful:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=5065000000080000001D2C0000&ECategory=Motion
If you use some third party motion controller, make sure they have drivers for LabVIEW and the version is correct.
If there is further question, just reply to this post and I will be notified.
XD Gao
Application Engineer
National Instruments

Need a driver that will work for HP Color Jet Laser Printer with OS 10.7

How can I download a drive, and fom where, that will allow me to print from a Mac Book Air with OS 10.7 from an HP 1600 LASER COLOR JET. Thank you

Hey Ravenmark,
This may or may not work but you can try using the Mac OSX drivers for the 1500 series and see if you get any good results.
They're listed here:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us &prodNameId=239140&prodTypeId=18972&prodSeriesId=239135&swLang=8&taskId=135&swEn vOID=219
I work for HP.

I need a driver that will work for my Sony DSC-S50 camera, I took my Mini to the Mac store to eject two CD's stuck. Now my camera will not download to iPhoto like it did before.

I had to take my Mini to the Mac store to retrieve a disc stuck in the drive now my camera will not download into iPhoto. I have a Sony Driver Disc,but when I try to open the disc I get a error message "Classic environment is no longer supported". I have OSX 10.6.7 what has changed?

I'm sorry, but there is no 10.7.5 - do you mean 10.4.x or 10.5.x or 10.6.x?
I asked because 10.6. (which you have now) no longer supports the classic environment, but previous OS's did. So, if the store "upgraded" you to the latest OS when you had it in for repair, then that would be the reason. So, if you can't remember which OS version was on it, I would call or go to the store and ask if they changed the OS version. Now, I'm not sure what a Sony Driver Disc is - do you mean it's the software that came with your camera? Depending on the format of your camera cards, you should be able to use a USB card reader instead which might be easier to deal with.

Need hard drive screw part number for T500 please

I want to buy a spare screw for the screw used to screw the hard drive cover to the base of my T500 notebook.
Where is it possible to find the part number so I can buy this??
What IS the part number/name I should use??
Perhaps someone knows the specific size/dimensions/etc. required to buy an off-the-shelf screw??
I tried calling support but there is no way to speak to a human to explain what I'm looking for, which is unusual and specific.
Thank you, Tom

Hi tlyczko,
The part number for the screw set is listed in the Hardware Maintenance Manual. You can buy them here.
Hope this helps, and come back and tell us how it goes!
I don't work for Lenovo. I'm a crazy volunteer!

Need working driver for Broadcom bcm5700 for Zen 7 SP1

Hi.
I need a driver (compiled if possible) for the bcm5700 network card.
The one comming with ZEN does not work.
both, the bcm5700.ko & the tg3.ko do not work.
I can load them ( Forceload ), but they do not detect the NIC.
It's an onboard NIC in a Dell Precission 390.
can anyone help please ?

Bjrn,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

I have partitioned my time capsule, but I can't get it to work as a Time Machine back up and permanent media server for both mac and PC. What format do I need to partition the drive to so that it works for both mac and windows and so that it will be visab

I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
Thanks

You are mixing up a couple of things here.
The TC drive cannot be partitioned without removing it.. did you do that?
If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC.

Need driver for iPod video and Windows Vista

I had an iPod video and it synched no problem to my computer. There was a hardware issue inside the iPod so i sent it back and got a new one. Now when I connect it to my computer, it brings up the looking for a driver window and says it can't find it. Its only been a week since it worked fine.. I don't know if there is an issue with the new iTunes or what but has anyone had any experience with this issue or can simply tell me where to directly download or find the driver?

I too have had a problem with needing a driver for ipod. My ipod was working fine, then my computer stopped recognizing the ipod. It says it needs a driver for the ipod and I can't find one anywhere...need help..please

Hard drive died. Need to reinstall on new laptop with windows 7 64 bit system, Need to get activation code for CS3 Web Premium.

Hard drive died. Cannot uninstall CS3 to remove copy registration. Need to reinstall on new laptop with windows 7 64 bit system, Need to get activation code for CS3 Web Premium.

Thank you Bob.
Just to clarify - in terms of backing up one set of these, would that just be so I had it on disk and didn't need to re-download from Adobe if the installation got corrupted somehow? Or do I need a backup for some other reason?
Thanks

Need lan driver for windows 7 32 bit

I need lan driver for the product name i enter above and that must be support in windows 7 32 bit please help me as soon as possible.. Thanks

Hi:
Try the 3rd driver (4th item) on the list at the link below...
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...

Driver files needed for the following Sony dvd/cd rom drive: "dvd-rom ddu 1615". windows xp

Driver files needed for the following Sony dvd/cd rom drive: "dvd-rom ddu 1615".
The dvd-rom drive will not read any type of dvd or cd.
desktop computer: Dell Dimension E310 , windows xp, service pack 3.
This Sony dvd rom was installed (by someone else) and replaced the dvd rom that initially came with the Dell E310.
Where can I find driver files for this dvd rom?
Thanks,
Denise

Hello Denise,
Welcome to the Sony Community.
All of the Sony internal optical drives are plug & play with Windows so no drivers are required for detection in your PC. If you are having issues getting your drive detected then please try the following:
• Ensure the Sony drive is set as a secondary master by itself. If you have another disc burner or a zip drive on the same IDE cable, please separate them.
• Ensure you have the latest Service pack for your Windows operating system and any other updates for your system installed.
service, storage support email
• Please remove your secondary IDE channel from the Device Manager.
If the issue is still not resolved, service may be required. You may contact the Sony Storage support team by e-mail at: [email protected] for further information.
Thank you for your post.

I need a driver for HP Deskjet 882C for Windows 7 64 Bit

Although Windows 7 does not officially support an old printer like HP deskjet 882C, is there some driver which would work for black and white printing?

The Deskjet 882c is supported in Windows 7, install the driver as described here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I have an external drive - WD My Passport FOR MAC. I want to format it to work on both mac and windows. Which format do you think I should use? Will either one cause damage to the files on the hard drive?

I have an external hard drive - WD My Passport FOR MAC. I want to format it to work on both mac and windows. I also want to be able to connect it to my TV and watch movies.
I read up and I think I am supposed to use exFAT or FAT32? I also saw MS-DOS. Which format should I should use? Will any of them cause damage to the files on the hard drive?
My little memory stick uses MS-DOS and it works on both mac and windows.
Please can you just tell me a little about each and suggest which one to use.
I know how to change it once you tell me so don't waste your time writing about changing it.

Will any of them cause damage to the files on the hard drive?
WARNING: FORMATTING A DRIVE ERASES IT COMPLETELY !!
If you need to carry large files (e.g., larger than about 4GB) back and forth, you may need ExFAT. Otherwise MS-DOS works for smaller files.
The Mac can Read, but not write Windows New Technology File System (NTFS) without an add-on program such as Paragon NTFS.

Need a driver for Acrobat Distiller 5.0.0.0 that will work on Win 7 Pro SP1 64-bit. How can I find it?

Need a driver for Acrobat Distiller 5.0.0.0 that will work on Win 7 Pro SP1 64-bit. Where can I find it, and what file is it? (Yes, it's an old Distiller that came with Acrobat 5. So shoot me. But I do need the driver.)
Win 7 prompted me for an *.inf file. Any idea?
If I find the original Acrobat 5 CD, which .inf would it be?
(Hey, since I'm asking, also a driver that will work on Win 8.1 Pro 64-bit.)
Thanks.

There is no .inf file on the Acrobat 5 CD that you can use to create a “driver.” If Distiller 5 even installs and runs on Windows 7 x64, the plumbing that came with Acrobat 5 to automatically feed PostScript files created by the PostScript driver to Distiller simply won't work with modern versions of Windows or any 64-bit version of Windows.
FWIW, Acrobat 5 is five full versions back from the current version. And no, we won't shoot you; you are effectively doing that to yourself! Your time must be worth something?!?!
- Dov

Need help selecting the right MBP for me, just bought a pc with Windows 8 and I already regret it..

Ok, so I'm an engineering student and I am in need of a good laptop to run programming and design type software. I have an older iMac which I love but I need the portability of a laptop for school. I was thinking I would be fine with a pc since most of the software I would be using for school is windows based. So last night, after shopping around for quite a bit, I decided to go with a Sony Vaio E series laptop with Windows 8, 8gb ram, i7 processor, dedicated graphics card, 1tb hard drive, and touch screen. It was the best performance laptop (on paper) Best Buy had in the store for just under $1000. I would have loved to get an upper end MBP but they are over twice the price as the Sony.. So I get it home with the Vaio and it feels laggy and glitchy, it takes 2 seconds for the window to pop up after 'right clicking', I can see lines in the screen, the resolution seems far from HD when on the normal looking windows side (as opposed to the tablet look, forgive my poor terminology) and the web browser, and the touch pad seems to be hit or miss in that it doesn't always register the touch pad commands. I checked all of the visual and performance settings, made the resolution as high as possible, changed some of the settings to the high performance settings, made sure all of my drivers were updated, and the only effect was a very loud fan that runs constantly.
So in short, I am going to take this back and start looking at the macbook pros. Here's my dilemna, I don't know which specs I will definitely need in a Macbook Pro. I need to be able to run windows on it either in parallel or as a partition for my programs necessary for school. Can the MBP run windows smoothly enough to run 3D design types of programs? If so, which one should I get? I love the size of the 13" MBP but it only has a dual core processor, instead of the quad core like the 15" MBP, I'm not sure if I definitely need the quad over the dual core. I would love a solid state MBP but they are out of my price range and not enough space if I end up partitioning it.
Sorry for the book, but school starts Monday and I need some direction to find out which one I need to get fairly quickly. Any help would be greatly appreciated.

Take a look at this MBP, a refurbished unit. Don't let the late 2011 release date put you off. For about $500 less than an equivalent 'new' one with similar specifications you get a quad core CPU and excellent graphics. As Steve359 mentioned, this can be upgraded if the need arises and has the same warranty as a 'new' one
I would not be surprised that these may actually be 'new' MBPs due to the length of time that they have been replaced by the current generation. I purchased a 17" model about 5 weeks ago, and a serial number check suggests that it is 9 weeks old.
http://store.apple.com/us/product/G0NM5LL/A
Ciao.

Need a driver for HP 895Cse for windows 7

Similar Messages

Maybe you are looking for