Need a filter to only pull 3 quarters worth of info

Hi All!
We currently run a report that shows how many "visits" the sales reps make to certain accounts. I use the "calender week" option to be able to figure out the goal they are suppose to have weekly and then show how many visits they actually have.
Due to the conversion back in feb to OnDemand, and learning curve, some of the reps did not have visits reported properly. So the higher up's would now like to take out the 1st quarter of information and include only the last 3 quarters in this report.
The "Calender week" function needs to only include weeks 15-52(it is currently 1-52)....how do I write a filter to do that?
Any help is appreciated!!!
Thanks!

Why not just use date greater than 1/4/09, this will mean the report only shows data after the date you want. If you do it on Calendar weeks then you risk eliminating the 1st quarter next year.
cheers
alex

Similar Messages

I have a 7 minute MP3 that I want to edit, however when I drag it into garageband it only pulls in the first 3:30. Any thoughts on why?

I have a 7 minute MP3 that I want to edit, however when I drag it into garageband it only pulls in the first 3:30. Any thoughts on why? At the 3:30 mark in the song there is a pause but then it starts back up but for some reason the program won't pull in the part of the song beyond the pause. Thanks!

Hello npatel1207,
You may need to increase the duration of the project.
GarageBand '11: Set the project length
http://support.apple.com/kb/PH1832
Cheers,
Allen

What i need to filter unwanted sites?

Hi All.
My knowledge is very basic in terms of firewall security but i have learnt so much in CCNA network fundamental, routing protocols and concepts, switching and wireless. Still have to do wan technologies.
What i need to ask from the community if its the right time and right place to ask questions like mine. Here i need to filter social sites (i.e facebook.com, myspace.com ect) including all the torrents and malicious sites. I was advised that i will need Cisco ASA 5505 for this job, but i want to ask the community if is that sufficient enough to have the device only, if not what else can i include.
Thanx in advance folks.

Hello,
I would suggest to go for Cisco Ironport Web Security Appliance which is basically does all your requirements
http://www.cisco.com/en/US/products/ps10164/index.html
Hope this helps
Harish.

Using Get-ADUser but 3.0 needs a filter? What changed?

I'm trying to just do a basic query of AD attributes from a text file of SamAccountNames I have, but I'm upgraded to PowerShell ISE 3.0 and there might be some things new I'm not understanding.
I was just trying to do something simple like this; Get-Content C:\Scripts\userabrivs.txt | ForEach { Get-ADUser -Properties * } | Export-csv C:\scripts\Output\adusers1
but in ISE it always asks for
cmdlet Get-ADUser at command pipeline position 1
Supply values for the following parameters:
(Type !? for Help.)
Filter:
I'm not very good at this so can someone help me understand why it needs a filter when I'm just asking it to use the list of SamAccountNames I have in a text file?

Hi,
You're never telling Get-ADUser which user you want to return. Try this instead:
Get-Content .\userList.txt | ForEach {
Get-ADUser -Identity $_ -Properties *
} | Export-Csv .\userProperties.csv
I highly recommend only returning the properties you need, the wildcard will return more information than most people want to look at.
Don't retire TechNet! -
(Don't give up yet - 12,700+ strong and growing)

Fix the #?&% stack plus filter bug. We need to filter stacks. Thanks.

You are kidding this bug is still in Bridge CS5! Isn't the whole purpose of Bridge to pick the best images from rest by stacking them, filtering them and keywording them. It is nuts if you waste your time stacking them you can't filter them anymore!!!!! Why even put the 'feature' in that way. Another thing that should not happen is if you work on a file and save it as the same name but in another file format say Photoshop it takes it out of the stack and drops it to the bottom of all the images.
How hard can it be to fix the central purpose of Bridge? Wow.
BTW Thanks for making Bridge CS5 so much faster now fix the stacks.
Michael Freitas

Review Note 1013140 - BI Frontend / BW Add-on - General Information & Limitations and Note 1013139 - Pre-requisite for BI 7.x Frontend
From Note 1013140 :
BI Standalone frontend 7.x
The new frontend tools are made standalone. It means that you can install the Business Explorer without using the SAP GUI. In the earlier versions, Busines Explorer( BEx )tools were installed as an add-on to the SAP GUI.
As far as the need for the java stack, it is not needed if you are only going to run BEx (Excel) Analyzer. The java stack is only needed for the new Report Designer, any web designer queries, or anything you are publishing via Information Broadcasting.

I need to filter the field Compensation Review :iview Compensation Planning

hello
I need to filter the field Compensation Review (iview Compensation Planning), this value come from table : T71ADM08 Compensation Reviews
i have many values, but i need show a range o one set the of values, any ideas ??
I can show only one filtering parameter from the parameter value of the iView, but it only one value, I need a filter a range
please any ideas, ???

Hello,
having had this very same issue in the past - the option we went with was to enhance the RFC FM that returned the list of the reviews with some removed depending on the employee type.
(I'm assuming that the list of avaliable reviews is dependent on the employee and that's why you want to filter).
Chris

Trying to test the Collaboration portal url using the below option in SICF but it is only pulling a blank screen

Hi All,
Am trying to test the Collaboration portal url using the below option in SICF but it is only pulling a blank screen.
The path in SICF is : /sap/bc/ui5_ui5/tmui/coll_portal
The webpage does not reflect any error except a blank screen.
Is there any basis side or TM side configuration that needs to be done to have data displayed on that webpage?
Appreciate quick reply.
Thanks.
Sat

Hi Jan,
Now am getting this error :
Gateway service /SCMTMS/USER not active
From the security guide I found a handful of services to be activated :
The following services are required if you intend to use the SAP TM Collaboration Portal:
●
/sap/public/bc/ur/
●
/sap/public/bc/icf/logoff
●
/sap/public/bc/UI2/
●
/sap/bc/ui2/startup
●
/sap/opu/odata/SCMTMS/TENDERING/
●
/sap/opu/odata/SCMTMS/USER/
●
/sap/opu/odata/SCMTMS/GENERAL/
●
/sap/opu/odata/SCMTMS/EVENT_NOT/
●
/sap/opu/odata/SCMTMS/INVOICE_SUBMISSION
●
/sap/opu/odata/SCMTMS/FRT_PROCUREMENT
●
/sap/opu/odata/SCMTMS/INVOICING
●
/sap/bc/ui5_ui5/tmui/coll_portal/
But in my system, in SICF only this path is present /sap/opu/odata.
/SCMTMS onwards is missing, so am not able to activate these bunch of services which ideally should be present in the system. Hence am thinking to open a ticket with SAP for the same.
What you suggest?
Regards,
Sat

19 song playlist, itunes only pulls 9 songs

I've created 7 different playlists in itunes, no songs are duplicates in any of the lists. Each list has about 19 songs (all lists under 80 MB). I've followed the simple burning instructions in itunes, but when I play the newly burned CD I find that itunes only pulls 9-10 songs from each playlist. I'm getting no errors whatsoever, and all songs must be authorized because every song plays correctly. And it's not just pulling the first 10 songs, it's pulling them randomly--numbers 3, 8, 10, etc...makes no sense. Each playlist is a mix of imported songs from personal CDs and purchased songs and I've never burned a CD in itunes, so burning more than 7x isn't the issue. Any advice? I've wasted all 7 CDs plus a few more trying to troubleshoot.

That's not a feature of iPhoto.
You will need to either edit the files to the length you prefer with an Mp3 editor
Or
Use a Slideshow app that allows for cross fading sound and/or multiple audio trackes.
Alternatives to iPhoto's slideshow include:
iMovie, on every Mac sold.
Others, in order of price: PhotoPresenter $29
PhotoToMovie $49.95
PulpMotion $129
FotoMagico $29 (Home version) ($149 Pro version, which includes PhotoPresenter)
Final Cut Pro X $299
It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs. However, there is no doubt that Final Cut Pro X is the most capable app of them all. You get what you pay for.

Set filter for only one column in tableview

Hi
i am using in MVC a htmlb:tableview with filter in only one column of 8.
This is all working fine, except that the user can enter a searchsting in the filterfield for all columns, but in handle_event (of the controller) ; i only react to a text in the filterfield of column 4 and ignore all other filtertext , which were maybe entered in the other columns.
My question:
how can i enter the filter only for one column, in a way that the user cannot enter any text in the filterfield of the other columns, only in column 4 ?
my view:
<htmlb:tableView id             = "requirements"
                 table          = "//model/pdst_reqs"
                 filter         = "APPLICATION"
                 keyColumn       = "EXTID"
                 iterator        = "<%=model%>"
                 footerVisible   = "FALSE"
                 encode          = "TRUE"
                 visibleRowCount = "<%=model->rowcount%>"
                 width           = "100%"/>
Best Regards
Britta

You can disbale the Filter for the particular column by setting the DISABLE_FILTER in the Iterator method IF_HTMLB_TABLEVIEW_ITERATOR~GET_COLUMN_DEFINITIONS. Here is the sample code
method IF_HTMLB_TABLEVIEW_ITERATOR~GET_COLUMN_DEFINITIONS .
CLEAR p_column_definitions.
CLEAR p_overwrites.
data tv_column TYPE TABLEVIEWCONTROL.
tv_column-COLUMNNAME          = 'FLDATE'.
tv_column-SORT                = 'X'.
tv_column-EDIT                = 'X'.
tv_column-ONCELLCLICK         = 'MyCellClick1'.
tv_column-title               = 'Date '.
APPEND tv_column TO p_column_definitions.
CLEAR tv_column.
tv_column-COLUMNNAME          = 'PRICE'.
tv_column-horizontalAlignment = 'right'.
tv_column-verticalAlignment   = 'middle'.
tv_column-ONCELLCLICK         = 'MyCellClick2'.
tv_column-title               = 'Currency'.
tv_column-EDIT                = 'X'.
tv_column-DISABLE_FILTER      = 'X'.    " <-------Like this
APPEND tv_column TO p_column_definitions.
endmethod.
Hope this will solve your problem.
Raja

Dbms_scheduler.file_watch will only pull in files with t/s = last run...

Hello,
I may be missing something easy, but instead of spinning my wheels I'll ask.
I am new to using the file_watcher in the dbms_scheduler so I followed the directions posted in this link:
http://awads.net/wp/2011/03/29/did-you-know-about-file-watchers/
Now this works, I can process the file.
But the file_watcher WILL ONLY Pull files that are modified/created AFTER the last run.
Since I am NOT running this in parallel, that means any file not picked up in the initial run will simply sit out there aging.
Am I missing something? I understand that it may be desired behavior to only pick up new files, but our process moves the files out of the directory once they are found. It seems odd that if you do not run it in parallel the file will be ignored forever more.
Am I missing a param?
--Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
BEGIN
      DBMS_SCHEDULER.create_program (
         program_name          => 'FILE_INGEST',
         program_type          => 'STORED_PROCEDURE',
         program_action        => 'Package.Procedure',
         number_of_arguments   => 1,
         enabled               => FALSE);
      DBMS_SCHEDULER.define_metadata_argument (
         program_name         => 'FILE_INGEST',
         metadata_attribute   => 'event_message',
         argument_position    => 1);
      DBMS_SCHEDULER.enable ('FILE_INGEST');
      DBMS_SCHEDULER.create_file_watcher (
         file_watcher_name   => 'watcher_fw',
         directory_path      => '/mydiriwanttowatch',
         file_name           => '*',
         credential_name     => 'sys.cred' ,
         destination         => NULL,
         enabled             => FALSE );
      DBMS_SCHEDULER.create_job (
         job_name          => 'FILE_INGEST_WATCHER',
         program_name      => 'FILE_INGEST',
         queue_spec        => 'watcher_fw',
         auto_drop         => FALSE,
         enabled           => FALSE);
    DBMS_SCHEDULER.enable ('watcher_fw,FILE_INGEST_WATCHER');
END;
/

okay,
Lets say the time of the last run is
05/12/2011 @18:00pm
I place three files into the directory
File1 05/12/2011 18:01
File2 05/12/2011 18:02
File3 05/12/2011 18:03
At the 18:10 run, file1 is picked up and processed
File2 and File3 never get processed or sent to the stored procedure to run (even on the 18:20, 18:30 etc file_watcher runs). however, if I go into file2 and make a change (at 18:35) the 18:40 run will pick it up...
but without manual intervention File3 will never get sent to the stored procedure.
I would expect, at the minimum, that on the first file_watcher job that ran file1 would be picked up, then file2 and file3 and the next subsequent runs (without manipulation).
what I mean about not running in Parallel:
DBMS_SCHEDULER.set_attribute('FILE_INGEST_WATCHER','parallel_instances',FALSE);Edited by: Harrison on May 12, 2011 3:11 PM

Elements that need to be paid only through Cheque

Hi all,
I'm on R12 International HRMS.
I have a few Elements that need to be paid only through Cheque.
These elements are run separately as a quick pay or by selecting an element set and assignment set and run the payroll process separately.
What is the best approach to go about this requirement.
The default payment type defined is Cash Type.
How can I make sure the payment for these element is always Cheque
And also how do I customize the Cheque Writer(Generic) Process to include my design of the cheque.
Thanks

If you are using Assignment set , run the payroll using assignment set and after that run cheque writer and make sure u did not add
any bank details to him , it will pay by cheque as per my understanding

Need to filter the out put of iw38 reprort

hello Experts,
i have requirement like need to filter the out put of iw38 report and after that again i need to filter that output by using department and client code and oreder .ned to show out put with 3 push buttons .
dertails:
selection screen fields:
region
customer code
oreder
date range
from these 4 fields i need to pass two(order and date range)   fields to iw38 report and then what ever output i am getting again that should filter by customer code and region which are there in my program
, need to display the out put with 3 push buttons .
plz suggest me with appraoach and sample code .
Note : i am using using submit and return export memory but its directly showing iw38 output and not coming back.

Hi ananta,
The function module LIST_FROM_MEMORY loads the list from the ABAP Memory to an internal table of the row type ABAPLIST.
The function module WRITE_LIST inserts the content of an internal table of the row type ABAPLIST in the current list.
The function module DISPLAY_LIST displays the content of an internal table of the row type ABAPLIST in a separate list screen.
check the below program..
REPORT Z642_TEST2.
DATA list_tab TYPE TABLE OF abaplist.
SUBMIT riaufk20 EXPORTING LIST TO MEMORY
                                AND RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject = list_tab
EXCEPTIONS
    not_found = 1
    OTHERS     = 2.
IF sy-subrc = 0.
CALL FUNCTION 'WRITE_LIST'
    TABLES
      listobject = list_tab.
ENDIF.
write: ' This is calling program', sy-repid.
Edited by: Rammohan Nagam on Apr 8, 2009 4:05 PM

Need to filter the Master Column

Hi Experts,
I need to filter a master column in my wd table. I am not finding an option to get the filter text in VewController. Master column of the filter row is not enabled to enter filter text. Can some one suggest me how can I proceed to make filter enabled for master column?
Thanks in advance.

Hi,
If you are using table UI element, you have to do some bit of coding to get the filter row.
1. Define a context node with cardinality 1..1. This node should have the attribute(s) for which a filter is required, and the attribute should be that same data type as that of the column attribute.
2. In the layout tab, for the specific table column for which filter is needed, bind the 'filterValue' property to the corresponding attribute created in step 1.
3. Define and implement an event handler for the 'onFilter' event of the table. This event handler should programatically filter the table.
Now, in the layout itself you should see the 'Filter row' for the table.
Hope this helps,
Regards,
Wenonah

Need to copy values only and paste to new sheet

I need to paste values only, not values and formulas, to a new sheet. This is like paste-special in Excel. I have not found a way to do this in Numbers. Neooffice and openoffice can do this on apple computers.
Bruce

Bruce,
Numbers has: Edit > Paste Values.
That may do what you need.
Regards,
Jerry

I am using OS 10.8.5 on a MacBook Pro, what version of Widows 8 should I purchase so I have an IE browser for some vendors I need to communicate who only have IE browser support?

I am using OS 10.8.5 on a MacBook Pro, what version of Widows 8 should I purchase so I have an IE browser for some vendors I need to communicate who only have IE browser support?

but if all you need is to use internet explore and not play 3d games then
using bootcamp is overkill and overcomplex
use a free virtual machine such as virtualbox https://www.virtualbox.org/
and you'll have IE comming out of your ears in no time

Need a filter to only pull 3 quarters worth of info

Similar Messages

Maybe you are looking for