Need a form filling program for firefox that works like roboform

when i use internet explorer i have roboform to fill the open data fields but in Firefox i use the automatic form filler, but it seems to only save data and want to reuse it if i have at least been on the site and filled out the fields at least once. roboform has my information and will fill any sites fields so i don't have to re-enter the data over again. so does Firefox have a similar program that can do what roboform does? thanks

Roboform works fine with Firefox, as long as you have the correct Roboform adapter for Firefox.
http://www.roboform.com/firefox.html
Scroll down that page to: '''Additional Full RoboForm Toolbar Information''' <br />
Firefox 3.0 - 3.6.x Installed from XPI roboform-firefox-3.0-frozen.xpi

Similar Messages

Is there an "insert all links" type of feature or add-on for Firefox that works with Thunderbird?

Hello Firefoxies,
Is there an "insert all links" type of feature or add-on for Firefox that works with Thunderbird or any email app? I want to be able to insert all the links from a Firefox bookmarks folder automatically in to an outgoing email and include the names that I have given to those saved links / bookmarks.
I searched for this add-on on the Firefox and the Thunderbird sites, but I don’t think the one that I found is for what I am thinking of.
What I would like to do is to be able to add all the links in a saved tabs folder, or any bookmarks folder, from Firefox in to the body of an outgoing email preferably in Thunderbird, or any email app... so I could just click and all the links and hopefully all the names that I have given to those links will then appear in the body of an outgoing email automatically, ready for me to then write what I want, plug in an address, and send.
When I did a search of add-ons on the Firefox and Thunderbird sites, I found something called “Open all links 0.3.1” on the Thunderbird site that I think is for the opposite of my description... I think this add-on is to automatically open all the links in an email that is received... '''which IS NOT what I want to do'''... I want to place all the links that I have in a Firefox bookmarks folder in to an outgoing email... the URL to the “Open all links 0.3.1” add-on is below for you to look at just in case I am reading this wrong...
https://addons.mozilla.org/en-US/thunderbird/addon/2913/
Otherwise, I could not find any add-on that fits my description.
Thanks so much,
numetro

Hello Firefoxies,
Is there an "insert all links" type of feature or add-on for Firefox that works with Thunderbird or any email app? I want to be able to insert all the links from a Firefox bookmarks folder automatically in to an outgoing email and include the names that I have given to those saved links / bookmarks.
I searched for this add-on on the Firefox and the Thunderbird sites, but I don’t think the one that I found is for what I am thinking of.
What I would like to do is to be able to add all the links in a saved tabs folder, or any bookmarks folder, from Firefox in to the body of an outgoing email preferably in Thunderbird, or any email app... so I could just click and all the links and hopefully all the names that I have given to those links will then appear in the body of an outgoing email automatically, ready for me to then write what I want, plug in an address, and send.
When I did a search of add-ons on the Firefox and Thunderbird sites, I found something called “Open all links 0.3.1” on the Thunderbird site that I think is for the opposite of my description... I think this add-on is to automatically open all the links in an email that is received... '''which IS NOT what I want to do'''... I want to place all the links that I have in a Firefox bookmarks folder in to an outgoing email... the URL to the “Open all links 0.3.1” add-on is below for you to look at just in case I am reading this wrong...
https://addons.mozilla.org/en-US/thunderbird/addon/2913/
Otherwise, I could not find any add-on that fits my description.
Thanks so much,
numetro

Authorization Object for BPs that works like CRM_ORD_LP (via Org Model)

Hello Community,
we have the requirement to restrict users to create BPs for specifc sales organizations only. I know there is CRM_BP_SA, this works perfectly but has the disadvantage that the Sales Org ID needs to be maintained in the PFCG role. As the IDs are different on D, Q and P we have to maintain PFCG roles on all these systems.
To avoid this we need something like the object CRM_ORD_LP for Business Partners, to derive the users sales org from the organizational model assignment of the user.
I don't think that there is a standard object for that, did anyone of you implement something like that?
Thanks for your answers,
Fabian
Edited by: Fabian Nothacker on Jan 28, 2010 4:41 PM

Fabian, I have two suggestions.
One:
If possible keep the same Sales Org ID changing it
In SPRO, CRM->Master Data->Organizational Management->Maintain number ranges
Select subgroup 01$$ and select "Number range maintenance" . Here you can change the intervals.
Second:
You might think about creating your on authority object.
To do this, basically you have to:
Creating a new auth. object at SU21 tx, adding parameters fields
Implement BADI CRM_ORDER_AUTH_CHECK , methods CRM_ORDER_ADD_AUTH_CHECK e CRM_RFW_CALL_AUTHORITY.
Adding the new object for your pfcg profile.
Godo luck,
Lalas
Edited by: Laercio P. Azevedo on Feb 1, 2010 9:51 PM

Looking for app that works like a guitar trainer

Anyone know if there's an app that lets you play back iTunes music but slowed down without changing the key? So I can learn guitar pieces...
Thanks

Have a look at the ones I posted here they are a more traditional kind of ring rather than old fashioned ones though.
http://www.fonefunshop.co.uk/forum/showthread.php?p=178318#post178318
HTH.

I need some Important Trigger Programs for Objects

I need some Important Trigger Programs for Objects.
If the program includes the V-array appln, that would be better to.

There are some drawbacks, running Windows 7 (only) on a Mac via Bootcamp yields less than stellar results, especially with the Retina display.
And of your traveling, the Mac's high power needs (especially the Retina display) and lack of removable battery are going to be a serious issue. The Retina display is glossy, not ideal for viewing on the road and in varied environments.
CS4 won't run on the OS X version that comes with a Mac, so your looking at purchasing CS6.
Support for Windows is more widespread than for Mac's, also if you ever need to redownload OS X to fix a issue, requires a fast reliable Internet connection of the broadband kind.
If your running Windows on your Mac, you can expect to be on your own and not get support as easily as if you were running it on a regular PC.
If you can't afford to keep up with CS upgrades, then you shouldn't be considering a Mac because there are more paid upgrades on that than on Windows 7, it's like a annual nightmare.
IMMO your still better off on a decent, 1920 x 1080 res, matte screen, removable battery (with extras), Win 7 Pro i7 machine (Pro+ runs XP programs) which will stay like it is and get security updates until 2020.
OS X changes every year and if you don't upgrade, + all your third party software, then about 3 years later your left behind for updates.
Also you will have to buy Win 7 to run on your Mac, the OEM disks won't work.
If your trying to budget, then a Mac is certainly not for you.

Do I need to buy new programs for osx lion?

Do I need to buy new programs for osx lion?

First you need to make sure you have a supported machine, and all the current updates (Core 2 Duo, i3/5/7 and 10.6.8.)
If you are using Microsoft Office 2004/8, then you will need to buy Office 2011. If you are using older versions of Adobe Photoshop before CS3 that are PPC only, then you will need to buy a newer Adobe CS.
If you are running iWork 08, it will work, but there will be no support for full screen unless you have 09 version. If you use Apple software like Final Cut or Logic Studio, you will also need the latest versions to use full screen support.
Basically, if you have any software installed that is more than 2 years old, you need to check if it is Intel, PPC or Universal. Because anthing that is listed as PPC will not work at all. And most Apple apps older than 2 years do not have any support for the new Full Screen or Versions features.
If you want to see if you have any PPC apps that are not supported at all, simply click the Apple icon at the top, click about this Mac, then click more info. System Profiler will open, on the left side click on "Applications" and you will see a list of every installed app. The far right column will tell you KIND, Intel, Universal or PPC. Anything in the list that says PPC will not work after installing Lion.

Need a Free designing program. for example: something to help me make shirt

Need a Free designing program. for example: something to help me make shirt graphics, posters, and other designs. i do not think my mac came with any such program. i have ilife 08 but i dont think anything there can help me?

Got to VersionTracker or MacUpdate and search.

Is there a Metro version of Firefox that works for Non-Touch computers with Windows 8.1?

I have a 64-bit Windows 8.1 computer of which doesn't support Touch features. Is there a Metro version of Firefox that works on 64-bit Windows 8.1 computers that don't support touch? If so, how can I get it?

Okay, thanks. Tbh the only advantage I thought of was the ability for it to open in a Windows 8 mode. Basically like how IE 10 does when opened from the start menu.

Need Sceptre TV Remote Control code(s) that work with VZ P265v3RC -- the '335' code does NOT

Recently upgraded my TV's in my house with new Sceptre 40" and 50" TV's - thank you WalMart. Purchased in September 2014. (new / current Sceptre TVs).
All of the Verizon printed, online, and other documentation for the P265V3 RC (model RC2655005/01B) for Sceptre shows to use code '335'. I have tried the '335' code on both of the TV's and no worky at all.
Following the 'Quick Setup Guide-Verizon FIOS remote' steps (paper/PDF instructions with RC Manual):
I can successfully enter the '335' code as outlned in step 4... and 'The RED LED will blink twice and then stay on'. occurs. So far, so good.
Step 5 states, "5. Press and release the <CH +> button repeatedly until the TV turns off......." This happens perfectly... I can press the <CH+>> button a few times, and indeed, my TV turns off.
Now, onto Step 6: "Test that the remote control is programmed for your TV"..... can't get Mute, A/V, other keys to activate /. be recognized - even though I'm followijng "press and hold that key. Release it as soon as it works"
Does anyone have a working code for Sceptre TV's ??? The Verizon '335' code doesn't work for me.
I need the 'best code' anyone has found that works with new Sceptre TV's.... the 335 code that VZ recommends... no worky.

Robertop,
have you tried the following? The info below is found here
Turn on your TV and the FiOS TV Set-Top Box.
Make sure you can see live TV.
Press and hold the OK and FiOS TV buttons together then release both buttons.
The red LED light blinks 2 times and then stays on.
Press and hold the Play button.
The remote control tries a new TV code every second.
The red LED light blinks each time a new code is sent.
When the TV turns off, release the Play button immediately.
NOTE: Some TVs may respond slower than others. If necessary, you can press the Ch+ and Ch- buttons to go forward or backward one TV code at a time.
Test your remote to ensure it is working properly:
- Turn on the TV by pressing the TV button on your FiOS TV remote.
- Press the Vol+ and Vol- buttons to ensure that you can control the volume.
- Press the Mute and A/V buttons to ensure they work.
If any of these buttons do not work, press and hold that button. Release the button as soon as it works.
If all the buttons work, press OK to this TV remote code.
The red LED light blinks 3 times and then turns off. Your remote control is now programmed.

I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?

I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?

I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?
H.264 video should be supported by your basic Snow Leopard operating system. The DVCPRO HD family of codecs is part of the Apple "Pro" codecs package which is normally installed as part of a "Pro" video editing suite installer or contemporaneously installed separately as part of one of the newer pro editing apps like FCPX. if you already have one of these pro suites or apps installed or available, then re-install the correct codec package that is missing. If not, you will need to purchase a Pro suite or app to be able to install the required codec package.

IM app for Playbook that works with iPhones?

Is there still no instant messaging app that will work between a Blackberry Playbook and an iPhone? Since Playbooks still don't run OS 10 there seems no hope in sight >.<

Hmm, I'm not to sure about that (no cradle), as I saw a cradle from a BMW post and it was for an iPOD (about a few years ago), the cig lighters are not such a good idea, I know someone that works at Apple and he says they get returned all the time as there is to much noise.
So, there has to be something seeing how it's set up for Sirius, and there was a CRADLE and since SIRIUS is offering a program soon for the iPhone, and its coming from Sirius, there must be a manufature that is planning on a cradle.
On the current cradle, there is a LINE OUT and one other (not line in) which looks like (both) are the 1/8th mini jack(s), same as iPhone.
Ideas besides cigarette lighter? Does anyone have a cigarette lighter method for 3G that works without noise? Or where else can I post, look?
Thanks

Is there a program that works like the old iPhoto?

Is there a program that works like the old iPhoto?
The old iPhoto is my ideal program. Unfortunately, it does not work on my new operating system. I like having the ability to look over my images with a slide show. However, the new package folder does not give me complete access to my pictures. Is there a program that will have both slide show with music options, and the general folder for the files? I heard that Picasa was supposed to have a general folder, but it is using the iPhoto package.
I have looked over the solutions to getting access to images from the iPhoto package mentioned in the discussion forum. I would like a simpler system that works like the old iPhoto. Is this a possibility? I do not feel comfortable putting my original photo files into a system that does not let me look at the file information, and I would like to have the original benefits of iPhoto tools.
Thank you for your time.

Welcome to the Apple Discussions.
The current iPhoto is laid out specifically the way it is because of folks like you
Since iPhoto 7 (iLife 08) the old iPhoto Library Folder is now a Package File. This is simply a folder that looks like a file in the Finder. The change was made to the format of the iPhoto library because many users were inadvertently corrupting their library by browsing through it with other software or making changes in it themselves.
Even in the old iPhoto it was never correct to access the iPhoto Library Folder.
However, the new package folder does not give me complete access to my pictures.
This is untrue. Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
There they all are.
Standard Warning which applies to every version of iPhoto: Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
I do not feel comfortable putting my original photo files into a system that does not let me look at the file information
What information are you missing? If you can tell us we may be able to help you more.
Regards
TD

Is there any form that works like Jtable that can be written into the html

Is there any form that works like Jtable that can be written into the html or jsp format?
<INPUT TYPE="SUBMIT" NAME="command" VALUE=""> refer to a Sumbit Button.
There no such thing below "I think"but just dreaming
Is there something like
<INPUT TYPE="TABLESUBMIT" NAME="customer" VALUE={rowcolumn(1,3,"peter"),rowcolumn(last,"name","jane")}> ......

Keep dreaming. As long as you are using HTML you are stuck with
all of its limitations. Among these is the lack of a JTable.
You have several options:
1) Use an HTML <TABLE>. For plain text you just put the
text between <td></td> tags. For input you put the input
as <td><input...></td>.
2) Extend #1 by creating your own object to draw the table.
You can do this in either Java or JavaScript. There are several
examples on the internet of how to do this. Some even include
sorting by clicking the column headings.
3) If you really want to use a JTable then you can write a JApplet
and put it on your JSP page.

Macbook: How do I uninstall a game on the macbook? I need to reinstall the game for it to work, but I can't figure out how to uninstall the game to begin with.

I need to reinstall the game for it to work, but I can't figure out how to uninstall the game to begin with. I know that in Windows, there is an "Uninstall" option, but I have found no such option on the Macbook.

This is one OS X's few weak spots. For most software, it is sufficient to drag the application out of the Applications folder and into the trash. Of course, this does not delete its preference files, etc, but these are usually pretty small, and can either be left in place or deleted separately.
Some software might ship with a separate uninstaller utility that you can run. Sometimes, the package installer can also perform uninstalling, too.
You can buy general purpose uninstaller utilities, but as far as I know they won't work for software already installed; only for software installed once the uninstaller is in place.
Perhaps the safest option is to contact the company that made the game and ask them how it should be uninstalled.
Bob

When will the stores have business workshops after the 5pm timeframe, for those that work can go to them?

When will apple stores have business/productivity workshops after the 5pm time weekdays for those that work?

You would need to talk to the store managers about that; we're just fellow users here. I would guess that they schedule workshops during the day when traffic is lighter so as to not impact and be impacted by evening retail traffice.
Regards.

Need a form filling program for firefox that works like roboform

Similar Messages

Maybe you are looking for