Need a good NAS drive for wireless access to my multi-media

I don't know if this is the right place to post this, but I have a large collection of music, video and photo files that I want to get off my laptop and onto a network drive that can be accessed wirelessly by other macs, and my xbox. Streaming ability and speed are the main priorities. Any help and suggestions for a good setup would be appreciated!
My current network setup is as follows:
• Airport Extreme Base station directly connected to a cable modem
• Network extended by another AEBS w/ a network printer connected via USB
• Network extended by an Airport Express w/ a Skype phone connected via ethernet

Thanks, but it doesn't work. The device gets an IP just fine but it does not do any DHCP relaying. Even when I manually set my laptop to a LAN IP and connect it to a wired port it is unable to get to the internet. The documentation doesn't mention much about setting up a DHCP relay. Any additional help would be much appreciated.

Similar Messages

Jdbc driver for ms-access

hi, this is ravi kiran.
I am trying to connect to ms-access using jdbc, there is now way that i can use jdbc-odbc bridge to connect to ms-access(because it needs creation of a dsn).
I have been searching for a freeware jdbc driver for ms-access, but i am not able to find one.
Is there any jdbc driver for ms-access that is freeware.
help me.
thanx in advance.

You can use JDBC-ODBC without creating a DSN in your system ODBC settings.
http://forum.java.sun.com/thread.jspa?threadID=5123254&start=4

JDBC driver for Microsoft Access

Hi, I have gone through the blogs and threads related to this topic. I found contradicting threads one saying we need to deploy Access JDBC driver and another saying no need to deploy JDBC driver for Access.
Integrate PI7.0 with MS Access 2003 Database - Says need to install driver for Access
Re: Problem when connecting to MS Access through JDBC Adapter. - Says no need to install driver for Access
I am now confused if I need to ask my Basis team to deploy driver for this. If some one has executed this scenario successfully, could you please confirm whether a driver needs to be installed or not. Also if it is required to install a driver, could you please let me know from where I can download the driver.
My PI version is 7.1 and Access version is MS Access 2007. PI is deployed on Linux.
Without asking for deploying driver I have configured scenario File->PI->Access and I am getting below error in my receiver JDBC communication channel.
"Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error when attempting to get processing resources: com.sap.aii.af.lib.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Can not establish connection:: SAPClassNotFoundException: jdbc.odbc.JdbcOdbcDriver";
Please suggest how to resolve this issue.
Regards, Prasad

Hi .
The format for Access 2007 is accdb . Are you using this format or MDB?
Anyway try this:
Driver={Microsoft Access Driver (*.mdb, *.accdb)};Dbq=C:\Test\TestDB.accdb;Uid=Admin;Pwd=;

Help I need to locate a driver for my soundblaster live 24 bit soundcard

My son has been given the following PC games for christmas:-
Command & Conquer 3,
Command & Conquer Red Alert 3,
Arma; Armed Assault,
Medal of Honour: Airborne
The problem he is having installing these 4 games is this. About half way through installation an error message appears that quite simply states "The software you are installing does not bear a WHQL signed driver. This software will not be installed".
The PC we are running is a Dell Dimension 900, that we purchased about 4 years ago, and it was bespoke.
I have run DxDiagnostics and it tells me that the driver for the graphics card is called p7.sys and the sound card are not WHQL logo'd, so how the hell do i download a driver for my soundblaster Li've 24 bit, that does? bear a digital signatre that is WHQL Logo'd. I hope you can help, me please.
Message Edited by simonwicker on 2-26-2008 2:9 PMMessage Edited by simonwicker on 2-26-2008 2:25 [email protected]

Re: Help I need to locate a driver for my soundblaster li've 24 bit soundcard? I guess you and your son are currently using windows xp. Well, what you can do is now is ignoring the WQHL pop-up window and choose the "install anyway" option during the installation of the soundcard driver, since WQHL only means the driver is tested by Microsoft and nothing more; drivers without the WQHL qualification does not mean they are bad drivers, they usually works as good as the WQHL ones.
Ofcourse you can also download the official drivers for the mentioned Soundblaster li've 24bit at Creative Labs support/download site.
here is it:
[url="http://uk.europe.creative.com/support/downloads/download2.asp?MainCategory=&Product=035&dlcentric= 025&Product_Name=Li've%2+24-bit&filetype=&OSName=Windows+XP">Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077 (63.39 MB)?[/url]
The driver is for all Soundblaster Audigy Value, SE, LS and Soundblaster Li've 24bit, since they are all based on the CA-006 soundchip (with other words Creative Labs renamed the soundcard several times). Also this driver should be WQHL-ed (if not, choose "install anyway" option during installation of the soundcard driver). Make sure you have uninstalled the older driver before installing the new one. For troubleshooting use utilies like "Driver Cleaner" or "Driver Sweeper" (google for Guru3D and go to the site and their download section to get the utilities/tools) to clean up the junk files of the older driver that are left in the Windows OS.
Good luck and Merry Christmas!!!
Message Edited by CTman on 2-26-2008 0:2 [email protected]

Where I can find an ODBC driver for MS Access

I need to use JSP access a .mdb file. I can do it for the test program in a window platform computer. However when i move the program to a linux server, it doesn't work. Then I am told to have an ODBC driver for MS Access installed on the Linux server.
I've tried to search it on google but I cannot find one to download, or I'm not sure which one I should download...
Could anyone give me a link to download such driver? Many many thanks!!

Thx for your reply!!
This is my old post after accessing .mdb file with JSP
http://forum.java.sun.com/thread.jspa?threadID=583788
just somehow the program doesn't work on Linux server and I can't figure it out, and I am advised to install an ODBC driver.

I need a Wi-FI driver for Equium A100-027

I own a Toshiba Equium A100-027 with the Atheros AR5006EG Wi-Fi Adapter.The Laptop is running on Windows XP and I need some software to use the wireless adapter. Could someone help me somehow?
The Driver had a Genuiune Windows Vista but it was working slow and I've changed the OS to XP.

All you need is the right driver for WLAN card. Some special software is not necessary because you can configure WLAN using Windows WLAN settings.

Do i need a external hard drive for my pictures

Do I need an external hard drive for my pictures?

Generally, you should have an external hard drive to backup your system. If your internal hard drive is filling up, you certainly can move pictures to an external hard drive.

In need of a printer driver for an HP Photosmart 2710 on Windows 8.1 RT 32 bit.

In need of a printer driver for an HP Photosmart 2710 on Windows 8.1 RT 32 bit.
This question was solved.
View Solution.

Hi lt12345,
I understand that you are looking to use the Photosmart 2710 with Windows 8.1 RT, but are unable to locate a driver. In my attempt to locate a driver I have come up empty handed. It appears that this printer is not supported for printing from Windows RT.
Sorry to be the bearer of this bad news. Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Need SPARTAN 3E board Driver for Labview FPGA 8.5 !!!!!! Thx

HI!!I need the spartan 3e driver for labview 8.5(not for labview 8.6) for school useI try to download it from ftp://ftp.ni.com/outgoing/NISPARTAN3ELV85.zip
but this link is dead now. Could somebody send this driver to [email protected] PLZ? Thank you a lot for all in advance
Solved!
Go to Solution.

Hello,
I'm looking for same (Labview FPGA 8.5 for Spartan 3E). But it isn't available on related url now. I'll be glad if someone can help to find driver.
Best regards,

I need a floppy disk drive for old 3 1/2" disks. I have a PowerBook G4 Mac with MacOS X 10.4 operating system. What will work for me?

I need a floppy disk drive for old 3 1/2" disks. I have a PowerBook G4 with Mac OS X 10.4 operating system. What external drive will for for me?

Hi,
Providing that the old 3.5" floppies are 1.44 MB HD disks, you should be able to use a USB floppy drive.
However, if the disks are 2DD/DSDD in the 800K Mac format a USB drive is not going to work. In this case you would need a suitable semi-old Macintosh computer with a built-in floppy drive as an intermediary.
Jan

Recomend a good tape drive for archving

I'm running out of room on my HDD's. Can anyone recommend a good tape drive for archiving? (preferably external & supports DAT)
Thanks!
Brian

er...Recommend .. sorry for the mispelling

Need bootable external Firewire drive for iMac G5

I need an external Firewire drive for an iMac G5 PC with OSX leopard that I can format to be BOOTABLE. Don't know where to buy one or even if they're available. I've bought 3 different drives on eBay, thinking each was what I needed, and none were.
I'm frustrated.
Would appreciate. Any helpful info.

I use this one:
http://eshop.macsales.com/item/Other%20World%20Computing/MAU4S7H20T64/
and SuperDuper for creating a bootable clone.
(But there are others too: http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB )

Need to download printer driver for 3510 with windows 10

I need to download printer driver for 3510 with Windows 10

Here is the link to the Deskjet 3510 drivers.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Need good Hard drive for 4:4:4 HD....recommendations?

Hey guys, we are going to start capturing straight from our camera into a new quad core. So we are goin top notch for this operation. We need a fast enough hard drive to capture full 4:4:4 HD footage. We don't need anymore than a Terabyte for now. Any recommendations. Im guessing SCSI hook up is the best for this, correct? Thanks in advance.

Uncompressed HD 4:4:4 isn't a "light" codec. It is one of the most demanding codecs you could be using. $6000 is actually cheap...and doesn't get you much storage. You might have to look at $12k to $15k to get decent enough space. And you need enough to get you AT LEAST 400MB/s...so an 8 drive to 20 RAID.
Plus the Controller Card costs another $2k.
Uncompressed HD isn't cheap...not by any stretch of the imagination. 4:4:4 is demanding and will require a lot of high cost equipment.
Also its going to be a portable system, to capture on set.
What are you doing? Shooting with what cameras? Capturing with what? These drives are not the most portable...but you can do it. But they are also VERY LOUD and require a lot of cooling, so they may need to be off the set in a very well air conditioned room. Good news about Fibre, you can be a mile away and still get great transfer rates.
Welcome to the world of HD. At least I am getting my feet wet with DVCPRO HD. TO go all in with 4:4:4...that is the World Series of HD. Well, the Minor League World Series. World Series is what Michael Mann, David Fincher and George Lucas are doing with HD.
Shane

ML won't connect to NAS drive for Time Machine Backup

I've just upgraded from Lion to Mountain Lion.
I'm using an Iomega Cloud Edition Home NAS drive. This worked 'fine' under Lion (occasional need to redo backup after failed verify).
Now:
- Automatic backups fail - TM can't find the drive over the network (wired or wireless)
- I can use Finder to see files on the drive, connect to the TM share, look into the Sparsebundle etc. Copy/Delete/Move files. In short - the NAS shares are fully accessible EXCEPT to TM
- If I force a backup from the menu bar (back up now) it fails with the same error message.
- If, however, I open Time Machine Preferences, and alt-click/right-click on the disc icon and then choose 'back up now', the back up will start and progress nicely.
In short, automatic back ups don't work, forcing from the menu bar doesn't work, but I can manually back up if I right-click on the disc icon in Time Machine Preferences.
At this point then, TM is failing me as a useful back up option. It's supposed to be 'set up and forget about it' security. It isn't under ML.
And this problem only started after the ML upgrade.
Thoughts?
Please help - this is now taking up too much time!

CarlPRobinson wrote:
Thanks Pondini for your responses - perhaps you could add this tip to your website?
Since I don't have a NAS, I've been reluctant to post any detail about them.
The closest I got was #C16 in Time Machine - Troubleshooting, because almost all NASs weren't compatible with Lion, but is now mostly out of date.
Without the proper qualifications (what TM message, if any, folks are getting; or what they may see in the NAS's interface), it might steer folks in the wrong direction, or provide no help at all. For example, that link says it happens when TM has been set up via Lifeline 3.2.6 or below. I have no idea what that is, or what Iomega NAS models this current problem applies to, etc.
That's why I usually just recommend checking with the maker.
I've thought about a general page, something like "problems with Time Machine and NASs" but I really don't think I could include enough info to be useful.
But I'm open to suggestions.

Need a good NAS drive for wireless access to my multi-media

Similar Messages

Maybe you are looking for