Need a help to create ejb application in netbeans with weblogic 9.2

Hi guys,
I am new to EJB..can anyone guide me to create a EJB application in netbeans 5.5 with weblogic server 9.2 ..
thank u in advance..

Hi guys,
If there is no one to help me with this so simple project then I will have to quit trying. I am getting to much pressure to get this done and I just don't know how to proceed anymore. I have found a document on OTN that explain the basics of binding but it's to vast and too complicated under pressure. If someone could help me to bind this LOV I would appreciate this so much and then I could relax a little and read all the good documents that I have found on OTN.
This is my last chance.
Thank you!

Similar Messages

I need any help i can get, im having trouble with the app find my iphone. I have lost my iphone, checked on the computer, and somehow, took it away so how do i get it back??

Help
I need any help i can get, im having trouble with the app find my iphone. I have lost my iphone, checked on the computer, and somehow, took it away so how do i get it back??

If you are saying that after signing into iCloud it is telling you device is not found, it could be for any number of reasons. If the battery is dead, if the SIM has been removed, or if someone else has the phone and they have restored it, it will not be shown. Also, if you located it once and then sent a remote wipe, it disables the abililty to locate the phone with Find My iPhone.

Can we create the Application name starting with Numerics

Hi All,
can we create an application name stating with number like 1234Samsung.
Also can we use the special characters between them.
Also are there any rules for creating database names other than maximum 8 characters limit.
Regards

Hi,
1. You can create starting with numerics, 123samsu.
2. samsung cannot complete ,the know reason is exceeding 8
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Can 10G express be used to create an application for use with a 10G instanc

Hi
Can 10G express be used to create an application for use with a 10G instance? I am new to Oracle 10G. I like the interface for creating applications, maintaining users, etc. Can this tool be pointed at a regular instance of 10G so that applications can be created against a regular 10G database not the express database?
Can PL/SQL proceedures that are created in 10G express also be migrated to a 10G database?
Thanks in advance
Dean-O

Can 10G express be used to create an application for use with a 10G instance?Yeah, that's the whole point from a marketing perspective ;)
Can this tool be pointed at a regular instance of 10G so that applications can be
created against a regular 10G database not the express database?Yes but it's a different version. Check out:
http://www.oracle.com/technology/products/database/application_express/index.html
Can PL/SQL proceedures that are created in 10G express also be migrated to a 10G database?Yes they can!
~Jer

Hi, I need your help, I don't know what happened with my iphone 4, but I can't edit my contact?

Hi, I need your help, I don't know what happened with my iphone 4, but I can't edit my contact?

try to make a hard reset (home button +power button for 15seconds) then restore by itunes.this is called DFU mode,once you done,can only restore the device by itunes!let me know if it works

Need help in creating WEB application....

Hi
I Created WEB application using jsp,java classes.
I kept All jsp files and classes in web-inf classes folder and created a war file and deployed that one in WEBLOGIC 7.0. I need to start a class while starting the server. I configured the startup classes using weblogic console.Now i am getting classnotfound exception while running the server saying that the startup class is not found. Is it necessay to set classpath to the classes which are under war file.If yes please give me an idea how to set classpath to a file which is under war/web-inf/classes/..
Any help will be appreciated.
Regards
Anand Mohan

Not sure about Weblogic, but in general you add the entire path to your classpath. For Windows 2000 servers -> Control Panel -> System -> Advanced Tab -> Env Variables
Example from simle Tomcat install:
CLASSPATH
C:\Jakarta\jakarta-tomcat-4.1.18\common\lib\servlet.jar;C:\Jakarta\jakarta-tomcat-4.1.18\webapps\myApp\WEB-INF\lib\classes12.jar;C:\Jakarta\jakarta-tomcat-4.1.18\webapps\myApp\WEB-INF\classes\com\brainysoftware\java\StringUtil.jar

Create ejb application and configure it into webservices

hi experts
how to create a small ejb application in netweaver developer studio and how to configure that application into web services.
please help me
thanks
ram.

Hi..
First of all create java dictionary project..
then create Ejb project...wchich will contain session bean n entity beans
session bean will contain ur business logic..
than create java project for wrapper class..
nw create enterpirse application project i.e. Ear project..
create .ear file for EAr project..deply it..
nw switch to Eaj p[roject nn right click on session bean..it will ask for new Web service ..create
n nw deply .Ear file n test Web service for WsNavigaor...
for thorough info go to thread:[EJB model] it will provide so many links reagrding Ejb project n web services...
hope it will sovle ur problm..
Regards,
Khushboo

Need some help in creating Search Help for standard screen/field

I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewarded

Hi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh

I need a help in creating a socket server ...

Hi
i need a help with creating a server that listen to a port(specified one). when the connection occured from the client, it should respond with a random number generator only.
it's a socket program.
thank u very much

kiiwii14 wrote:
i mean i didn't take java yet in the college. and, i'm gonna take it next course.
and,the Dr. gave us an assignment to do it in java. and, i ask him to do it in other language(c++) but he insist to do it in java. so, i'm asking for help...
i hope it's clear know...If you know some c++, the learning curve doesn't have to be very steep. If you haven't got an IDE yet, that's the first thing to do - Eclipse is free and quite good. Ask it to create a new class, e.g. NumberServer and have the option to create a main method checked. Finish the server part first - you should be able to communicate with it through telnet. Put in a lot of System.out.println so you see what your program is doing, or better yet, learn to use the IDE's debugger - which is good in Eclipse. Read the javadocs for the classes mentioned in an earlier response, and search this forum or Google for their usage if you find the documentation lacking. Then when you have specific problems that you need help with, you can create new questions for them here.

Need a help to create user and assign BP to it

Hi,
I have requirement to create Users (like SU01) in CRM and for that users need to create BP with role EMPLOYEE and assign BP to that USER.
Can anybody please help on which Function Module I need to use to create user and assign BP to it.
Thanks in advance..
Sushant

Hi,
Many post post are there for your query in SDN search if my below shown link is not helpful.
Hope the below will help you.
Users Created ...
Cheers!!
VEnk@

Looking for a Apple developer to help me create an application

Looking for a Apple developer to help me create an application

Sure, but I meant he/she could sign up, and then see who is asking questions in the right sort of market area and potentially make contact that way ?

I need some help , for create some paper on air

Hi everyone
I need some help , i work in a static sequence from Tehran street (1 frame), i paint damages on this frame in Photoshop because i need war atmosphere, then i add some smoke and cloud with particular .
but i think this sequence is not realistic yet
now i want add some moving paper in air and on street
do u have any solution for how can i make this paper and moving those
Thanks a lot
and pardon me for bad English
Ali Molavi

The best tool to add this kind of particle is After Effects.
If you have the Creative Cloud then I recommend you download that.
Slightly annoying voice over, but here is a youtube tutorial you can follow top make floating particals. You can adjust it to make it look exactly as you want.
http://www.youtube.com/watch?v=dq2op6yqvFk&noredirect=1

Application deployment order with weblogic-ejb-jar.xml and jndi-name

I have two applicatation working on Weblogic server v. 10.3.6.
First of them creating one ejb stateless bean and creates JNDI maping for it (in weblogic-ejb-jar.xml file):
<weblogic-enterprise-bean>
     <ejb-name>ConfigMenegerBean</ejb-name>
     <stateless-session-descriptor>
     <stateless-session-descriptor>
          <business-interface-jndi-name-map>
          <business-remote>package.ConfigurationSessionRemote</business-remote>
          <jndi-name>ConfigMeneger</jndi-name>
          </business-interface-jndi-name-map>
     </stateless-session-descriptor>
     <enable-call-by-reference>true</enable-call-by-reference>
     <jndi-name>ConfigMeneger</jndi-name>
</weblogic-enterprise-bean>
Second appication have to refer for this bean by JNDI using spring been lookup :
<jee:jndi-lookup id="configManager" jndi-name="ConfigMeneger"/>
I changed deployment order parameter for both apllication(first=100 and second=500) in order to first app start first and share bean by jndi to another application. Unfortuantelly I got an error :
javax.naming.NameNotFoundException: Unable to resolve 'ConfigMeneger'. Resolved ''; remaining name 'ConfigMeneger'
How can I configure deployment order that first application make jndi mapping for bean, before the second application will use it ?

Ok in a way I have solved my problem (even if I am not completely satisfied by the way on how to proceed...). So thanks to message "JBuilder7.0 and Weblogic6.1" on EJB sun forum :
http://forum.java.sun.com/thread.jsp?thread=285735&forum=13&message=1255488
I have tried the following actions (mentionned in the other forum messages):
- To preserve changes to weblogic*.xml, the safest way is to change the ejb-borland.xml.
(I am not sure that I have applied this advice correctly, because I suppose that syntax is not similar in weblogic file or borland file).
And you can MANUALLY update the weblogic file in your JAR archive.
1. Open the EJB JAR file in Winzip and extract the weblogic-ejb-jar.xml file, so that a copy exists in your
project directory.
2. Open this file (in Notepad), add the WebLogic specific information, and then save the file.
3. Now, when you are finished with the build cycle and are ready to deploy, you may open the EJB jar file
and swap in the weblogic-ejb-jar.xml file."
Good Luck.

Toplink-ejb-jar.xml config with weblogic-ejb-jar.xml

Hello,
To use toplink with EJB's deployed in Weblogic.
I changed weblogic-ejb-jar.xml :
(Because, it does not allow me to change <type-identifier> and <type-version> elements)
<type-identifier>WebLogic_CMP_RDBMS</type-identifier>
<type-version>7.0</type-version>
<type-storage>META-INF/toplink-ejb-jar.xml</type-storage>
Here, is the toplink-ejb-jar.xml:
(Because, I am asked to give PUBLIC value for Weblogic 8.1.0....)
<!DOCTYPE toplink-ejb-jar PUBLIC "-//BEA Systems, Inc.//DTD WebLogic 8.1.0 EJB RDBMS Persistence//EN" "file://D:/Toplink10g/toplink/config/dtds/toplink-wls-ejb-jar_10_0_3.dtd">
<toplink-ejb-jar>
<session>
<name>myUniqueSession</name>
<project-xml>META-INF/project.xml</project-xml>
<login>
<connection-pool>demoPool</connection-pool>
</login>
</session>
</toplink-ejb-jar>
1. I have also given full path to the "toplink-wls-ejb-jar_10_0_3.dtd", but I still get parsing error:
"myBeans.jar": [EJB:011019]While reading META-INF/toplink-ejb-jar.xml, the persistence layer of the Entity EJB failed to deploy. The error was:
"myBeans.jar": Error in descriptor line 5: Error parsing file at line: 5 column: 18. Element type "toplink-ejb-jar" must be declared..
2. Also, How I can avoid the full path to the DTD???
Thanks for your help in this regard!

You are not properly configured to use TopLink with Weblogic. You need to place the TopLink_CMP_Descriptor.xml install file in your Weblogic lib/persistence directory. Add "TopLink_CMP_Descriptor.xml" to your persistence.install file and then update weblogic-ejb-jar.xml to reference the correct TopLink persistence type and versions, ie,
<type-identifier>TopLink_CMP_2_0</type-identifier>
<type-version>10</type-version>
<type-storage>META-INF/toplink-ejb-jar.xml</type-storage>
See the TopLink developer guide for more information and configuration details.
http://download-east.oracle.com/docs/cd/B10464_05/web.904/b10313/pkg_depl.htm#1124524
Cheers,
Guy

Help: which LDAP server should I use with weblogic 5.1

Hi:
I try to use LDAP for user profile management. I am free to use any LDAP
server as long as it is easy to work with weblogic 5.1 or 6.0.
Any suggestions?
Thank you.
li

This is what I did for my DS settings
1. select Oracle JDBC Driver
2. set Classes12.jar in Websphre classpath - (Oracle thin driver)
3. create DS with option User defined JDBC provider
means I have added Thin driver provided by Oracle , instead of deprecated Thin driver from IBM.

Need a help to create ejb application in netbeans with weblogic 9.2

Similar Messages

Maybe you are looking for