Need a help to write up the asset value(Land) which is not depreciated

Hi Experts,
My client want to write up the asset values(Land value) from 500000 to 750000. But this asset is not having any accumulated dep.
to write up the vlaues.
please could some one suggest how can we write up the values which are not having the accumulated dep.
i tried through tcode ABZU but i am getting the below error.
You cannot post write-ups
Message no. AA402
Diagnosis
None of the areas to be posted in accordance with the transaction type entered manages one of the depreciation types entered or cumulative values.
Procedure
Check the transaction type.
please could some one help on this.
Thanks in advance.
Regards,
Venkat

Hi Paul,
Thanks for your valuable inputs.
As per second option my client is not configured the Revaluation of assests, hence this is not applicable.
Then as per your first option we can go ahed on this.
Please could you suggest me which t code is most suitable for the manual posting.
Thanks & Regards,
Venkat

Similar Messages

  • I bought an unlocked Iphone 3GS, I needed to update Ios5 and restored the settings for that which was not authorised for unlocke, but after that iphone is not getting activate and no sim card insatlled error is there. i m using local sim card in Pakistan

    I bought an unlocked Iphone 3GS, I needed to update Ios5 and restored the settings for that which was not authorised for unlocke, but after that iphone is not getting activate and no sim card insatlled error is there. i m using local sim card in Pakistan

    You didn't buy an 'unlocked' iPhone 3GS - you bought a 'hacked' one.
    Updating to iOS 5 removed the hack and the unofficial unlock.
    All you can do is try to find out which network the phone is locked to and ask them if they can unlock it properly.
    Otherwise, sell it or throw it away and buy an officially unlocked phone from an official source.

  • I need some help with my ipod-the screen is frozen on do not disconnect

    this morning i went to sync my ipod with itunes to update it but when i plugged it in to my computer it said do not disconnect but the screen froze before it even connected to itunes.... now the screen is frozen on do not disconnect and the ipod won't even turn off. anyone have any suggestions?

    Try Resetting your iPod. Toggle the hold switch off and on a few times then hold down the MENU and SELECT (centre) buttons for five or ten seconds until you see the Apple logo appear then the menu button to go to the normal display: iPod isn't responding it appears to be frozen

  • Write off the asset

    Hi,
    Please can someone advice me how do we write off the asset.
    Regards,
    Parul

    hi
    You can call up the asset history sheet as a totals list, or as a detail list showing individual assets. The detail list shows the capitalization date for each asset, and, if applicable, the deactivation date and any transactions in the year being reported.
    There is a special history sheet version defined for showing special reserves for special depreciation. This version shows the
    ·        Initial balance
    ·        Allocation to special reserves
    ·        Write-off (depreciation) of special reserves
    ·        Write-off of special reserves due to asset retirements
    ·        Write-off of special reserves due to transfers
    ·        Closing balance
    Procedure
           1.      Call up the report for creating the asset history sheet (Info system ® Report selection ® Balance sheet explanations).
           2.      Enter the start parameters for the report. Make the following particularly important entries
    –         Company code for the report
    –         Report date
    –         Sort version that you want to use
    –         Asset history sheet version that you want to use
    –         Use the “current book value” indicator to specify if you wish to show planned annual depreciation, or the depreciation already posted.
           3.      If you have not posted the actual retirement of low value assets, you can use the asset history sheet to simulate their retirement (in order to minimize the transactions necessary for their retirement). In this case, enter the asset class for low value assets.
    You also need to specify a time period for the retirement simulation. Please note that the simulation time period must begin on the same date every year so that LVAs can be shown continuously and correctly in the history sheet. This fixed start date should lie in the distant past (for example 1900). Using the same start date each year ensures that LVAs, for which retirement has already been simulated, do not appear in the history sheet with their APC in subsequent years. In addition, the end date for the simulation time period has to be in a fiscal year that is still open.
    The same procedure applies for intangible assets.
    Graphic: Simulation Time Period
           4.      Limit the report as needed. If needed, make additional entries for lists created using batch input.
    for furthur notes
    http://help.sap.com/search/search_overview.jsp
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/4f/71e286448011d189f00000e81ddfac/frameset.htm
    nagesh

  • Hi i need some help im having problems the ipod can not be turned , in fact it was working fine but suddenly switched off and did not return to light n because it reconnected and if I had drums

    hi i need some help im having problems , the ipod can not be turned , in fact it was working fine but suddenly switched off and did not return to light n because it reconnected and if I had drums  . what can i do to turned on .
    its an ipod touch 64gb

    That symptom is covered here:
    iPod touch: Hardware troubleshooting

  • FI-AA: table(-s) for the asset value

    Dear forum members,
    I need to find the table where I can get the asset value from!?
    The background is that I`m writing a report where I have to get the value of an asset. If it is higher then 0,00 then it has to do this and if it lower than 0,00 it has to do that and so on.
    It would be great if someone could help me with this matter, or at least give me an idea how to find that out.
    Thank`s in advance

    Hi,
    definitely table ANLC. You have to calculate the asset value as ANLC contains acquisition cost, accumulated depreciation, depr. of the actual year,...
    best regards, Christian

  • How can I get the default value of a particular preference programatically. I know I can see the default value for some of the preferences in about:config but, I need a programatic way to get the default value.

    <blockquote>Locked by Moderator as a duplicate/re-post.
    Please continue the discussion in this thread: [tiki-view_forum_thread.php?comments_parentId=702631&forumId=1]
    Thanks - c</blockquote>
    == Issue
    ==
    I have a problem with my bookmarks, cookies, history or settings
    == Description
    ==
    How can I get the default value of a particular preference in FireFox?.
    I know I can see the default value for some of the preferences in about:config but, I need a programatic way to get the default value.
    I see some that there are values for preferences in firefox.cs but I am not certain that these are being used as the default values for preferences. prefs.js in user's profile only has the updated values and not the default values.
    Any help towards acheiving this programtically is greatly appreciated.
    If the default values are stored in a file, kindly let me know the format in which it is stored for me to parse it programatically.
    == User Agent
    ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

    Dear Friend,
    Here when you have the callableSattement as ?=proc(?), the first ? is an output parameter. So you should register it as out parameter using registeroutparameter.
    Then you can get the value from the outparameter using callablestatement.getXXX().
    Try that way.
    For free tral versions of JDBC Drivers go to www.Atinav.com

  • Setting the Asset Value date as the dep start date

    Hi,
    I need to pick depreciation from the asset value date and NOT the dep start date in the asset master record. Is this possible? IF it is, then what config changes needs to be done.
    Thanks

    Hi
    You can define that in the multi level method assigned to your depreciation key.
    Assign points if the information is  useful to you
    Regards
    Sanil Bhandari

  • I need URGENT help, My company just changed all our iphones to Samsung Notes and i am now unable to get ANY messages from current iphone friends and colleagues colleagues.... This is certainly unfair and inconvenient.... Once loved apple not so much now

    I need URGENT help, My company just changed all our iphones to Samsung Notes and i am now unable to get ANY messages from current iphone friends and colleagues colleagues.... This is certainly unfair and inconvenient.... Once loved apple not so much now

    Go to: https://supportprofile.apple.com/MySupportProfile.do
    Log in if not already logged in.
    Click on "Edit Products"
    Click on the "X" to the right of the product.
    Click "Unregister".
    If that doesn't work, you're going to need to call AppleCare and have them remove your phone from the system.
    Best of luck.

  • Is it possible to change the asset value after depreciation posted for 4 months

    Hi
    Is it possible to change the asset value from 50000 to 60000 after posting the depreciation for 4 months.
    If it is possible kindly share the process..
    Thanks
    Srikanth KVS

    1. In the explorer page, settings dialog, you can change the display format to show only name.
    2. We cannot use other freeform attribute as DisplayFormat, rather than Code Name. So there are 2 option here:
    a. Remove HierarchyName attribute and just use Name attribute. In the next release, we will allow give Name, Code attribute a displayname, so you can give Name display name as "HierarchyName" in the SQL Vnext release.
    b. Make a Business Rule to update Name when HierarchyName is changed.

  • Itune is telling me I put in the wrong password. Which is not and now itune just reedem my itune card. and Im not able to buy anymusic

    I had created account. I enter my information. I also enter my itune card. After I enter my itune card. It said you can shop now. So, I had went to purchase music. And a box pop up telling me I need to enter my apple Id. I did that and it now say Im enter the wrong password. Which is not. So, how do i fix this problem. Beacuse my itune card is register in there and Im not able to buy music

    I cant find any reciept in my email or in my husbands email.  I am going to attempt to call and speak to someone who can help me because this was not my fault except trying to be normal and update my phone!

  • F-90. asset value date field is not displayed

    Dear all
    In asset acquisition posting through F-90. asset value date field is not displayed at the time of entering acquisition. It is in supress mode. so system is capturing the capitalisation date. But we can see this capitalisation date as asset value date in fb03 display. Now i want to display this field as optional field while creating the entry and also i want to change the field in display mode to change mode. kindly tell me the menu path to access the settings.
    Thanks With  Regards
    RSS.

    Hi,
    You can enter a diff asset value date for your acq posting, only thru transaction ABSO using TType 100.
    This will resolve your issue.
    Thanks,
    Srinu

  • The return value of "which"

    Dear OS Xers,
    Subject: Script writing. The "which" command that that returns the location of a program.
    I'm writing a script that, at the beginning and before the main body of the script, checks that the commnds it uses are installed on the system. I was hoping to use "which" to do this, specifically checking the return value thus:
    which ls bash gaga >/dev/null # list of needed functions
    if [ $? != 0 ] # cause a rumpus.
    However I find that the return value is 0=OK even if which can't find some of the programs.
    Now, I can get around this for apple by writing a grep script that checks for "^no " in the std output. However I suspect that apple's implementation is non-standard, and that correctly "which" is meant to return an error value in this case. If this is the case then correctly the thing to do is not to script for apple (I'm only writing for my own, hopefully up-to-date systems!) but to correct the apple implementation.
    I want to check two things with you. First, I have no real basis for saying that apple's implementation is non-standard. I only know that I've checked other systems and man pages and all that I've come across so far indicate that an error is returned. Is there some more authoratitive method of checking what the behaviour should be? Some standards body? Secondly, I realise that this is small fry but I'd be more than happy to update apple's code if they are likely to approve the change. If that's the case can someone please show me where I can find the relevant source code?
    Regards, Max
    http://unixhelp.ed.ac.uk/CGI/man-cgi?which
    RETURN VALUE
    Which returns the number of failed arguments, or -1 when no `program-
    name' was given.
    Debian implementation:
    EXIT STATUS
    0 if all specified commands are found and executable
    1 if one or more specified commands is nonexistent or not executable
    2 if an invalid option is specified
    I'll have a chance to check the implementation on some solaris machines next week.
    As you can see, they're not consistent in terms of what error they return, but they do all return a non-zero value.
      Mac OS X (10.4.4)  

    The fink version ( /sw/bin/which ) does what you're looking as well--it doesn't recognize aliases though. tcsh and OS X's csh (which happens to be a duplicate of the tcsh executable) do recognize aliases.
    I guess the script (/usr/bin/which) is there to either echo one's path when a command's not found or give a different response to aliases. Otherwise one could change the script to:
    #! /bin/csh -f
    which $arg
    exit($?)
    Note the added -f...this prevents aliases from being set by csh when they don't exist in the bash shell. But neither script will recognize aliases set in a bash shell.
    TiBook G4   Mac OS X (10.3.9)  

  • Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

    Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

    : Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.The FP-1600 modules automatically send data on-change only. The change threshold is by default 0%. Any change, even a single least significant bit change, is sent back to the computer. If the FP-1600 firmware revision supports deadbanding (firmware revision 3.0.x and later, can be downloaded from ftp://ftp.ni.com/support/fieldpoint/Update/FPEthernet0320.zip ). Then on each analog channel or count channel you can specify a percentage change for deadbanding in FieldPoint Explorer. This is done on a channel by channel basis, by right-clicking on the particular IO module and choosing Edit this Device, then choosing Channel Configuration. Each channel (if it supports deadbanding) will have a deadband entry box on the middle right side of the screen).
    The FP-1000/1001 seri
    al network modules do not support deadbanding. The checkbox in FieldPoint Explorer is simply for how FieldPoint Explorer displays the data to the user and does not effect client programs nor the behavior of the network module itself.
    Regards,
    Aaron

  • My pc has win the operating system view, which does not support lightroom 5. I want to buy version 4

    My pc has win the operating system view, which does not support lightroom 5. I want to buy version 4?

    Thank you, Jim, for your prompt reply. Amazon has it for $151.99, Ebay has a few copies that end up being about as expensive after international shipping and other fees, and I don't trust most of the other sites after reading reviews on them. Looks like I'm going to have to fork out some dollars. How unfortunate.
    Thanks again,
    Michelle

Maybe you are looking for