Need a little assistance with Macbook Pro Battery....

I feel my battery has been draining much faster than normal lately. Also, sometimes the computer will get a little noisy as if it's overheating and get hot too.
Never used to do this. I read on a previous thread about the cycle count....if someone could check it out, it would be much appreciated. Thanks
Charge Information:
Charge Remaining (mAh): 3910
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 6209
Health Information:
Cycle Count: 559
Condition: Normal
Battery Installed: Yes
Amperage (mA): -1100
Voltage (mV): 11639
Macbook Pro (Early 2013) Retina 13 in.
2.6 GHz Core i5
8 GB

You very likely have picked up some "extras" while browsing that are causing your problems, or you installed some anti-virus or "cleaning/tune-up/ optimizing" software.
Please see this Apple article that helps with battery life and heating issues:
Runaway applications can shorten battery runtime, affect performance, and increase heat and fan activity - Apple Support
The article was written before OS 10.9 and 10.10, so you need to make a change in Step 3 for 10.10. To make the required change from "My Processes" to All Processes," you need to use Activity Monitor's "View" menu now:
Another thing that is not clear in the article is that you will not get good results if you run the test immediately after a restart. Use the computer normally for about a day so that any runaway processes are activated, then run the test.

Similar Messages

Urgent I need help about Problem with macbook pro

The first sorry for my english,
I have a macbook pro buy it me almost one year ago, and these days me the mouse remains I want and cannot do anything have to wait a few seconds and it returns to work, and also when it puts in rest it touched all the keys and the trackpad but it does not answer, I have to close the screen and wait awhile to raise it and return to react, if someone can help me it be be to him very grateful, in addition the guarantee of hardware is ended in 8 days. thank you very much

Hi leptones, and welcome to Apple Discussions.
I'm not sure if your warranty expires in 8 more days or it already expired 8 days ago? If you're still under warranty, I would definitely call AppleCare or go to an Apple Store or AASP; they can troubleshoot it and determine if it's something that needs fixing while you're still under warranty (if you are).

Problems with Macbook Pro Battery

Recently my battery keeps dying much quicker than it used to. When there's around 20%-30% charge left it will usually shut down now. I'm not sure what to do at this point. It's health at the moment is at 56% and has a total of 28 cycles. Do I have a defective battery? I bought the Macbook Pro back in July of 07 so I'm sure the warranty is still intact. What should I do?
PS: Yes I have been calibrating my battery at least once a month.

Model Information:
Manufacturer: Sony
Device name: ASMB012
Pack Lot Code: 0003
PCB Lot Code: 0000
Firmware Version: 102a
Hardware Revision: 0500
Cell Revision: 0303
Charge Information:
Charge remaining (mAh): 3161
Fully charged: Yes
Charging: No
Full charge capacity (mAh): 3161
Health Information:
Cycle count: 28
Battery health: Fair
Battery Installed: Yes
Amperage (mA): 149
Voltage (mV): 12587

HT2995 need help connecting headset with Macbook Pro am using Rosetta Stone and my Mac tells me the internal microphone is being used though I have changed the internal and external settings.

I'm a first time user of apple support.
Have attempted to set up headset to use Rosetta stone.

Hello & a warm welcome!
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

MacBook Pro battery had accumulated more than a 1000 charges, and stopped functioning unexpectedly. Went and got the battery replaced. Just saw that SMC Firmware 1.6 update deals with this. Possible to get my money back?

MacBook Pro battery had accumulated more than a 1000 charges, and stopped functioning unexpectedly. Went and got the battery replaced. Just saw that SMC Firmware 1.6 update deals with this. Possible to get my money back?

The firmware update corrects an error that may occur, however the techs would have checked the condition of the battery prior to installing a new one. If the battery was questionable, the firmware update was really not too important.
You can check the battery condition by going to the apple, left side of the menu bar, About This Mac, More Info, System Report, Hardware, Power and see what it says about Cycle Count, Condition, Capacity: Condition anything but Normal needs to be checked and may need to be replaced.
The cycle count of 1,000 charge cycles is the typical life of a Lithium-Ion battery, the point at which the capacity drops to 80% of the as built capacity.

I have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os)

i have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it, through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os) can any one reply.

Until the MacBook Air was released and supported in 10.5, the Mac did not consider USB to be a valid Networking Protocol. So set the Mac with USB solutions aside.
To connect computer-to-computer, you typically need to be using an Ethernet crossover cable. Assigning the same address to two Ethernet devices is never the solution -- it gives a Network Conflict, just as you said.
If your Windows box has some mechanism for Sharing its WiFi connection over Ethernet, you would have to follow its rules. Whether that means Manually assigning an Ethernet Address in the same range or the PC will provide the Address, I do not know.
Best success may be running an Ethernet cable to your Wired/Wireless Base Station, or using a "gaming adapter" (Ethernet-to-Wireless no drivers required) connected to the Mac's Ethernet port to give it WiFi access. What is your Base Station {Cable, DSL, FIOS, Other} ? Ethernet cables can be up to 100 meters (an American Football Field). Often the Base Station can be moved closer for more convenience.

Dota 2 and Macbook pro battery

My early 2011 15 inch macbook pro battery drains while connected with 85w charger when i am playing dota 2. Dota 2 runs faily well with very little lag in almost high setting. Shouldn't 85w charger provide adequte power for gaming. Dota 2 is not even a very demanding game. I have only played few small 2d games in my pro and this may be the first time i am playing a 3d game. And also sometimes it doesnt drain even when i play 2-3 matches but most of the other times it drains in single match. I have yet to see it drain down 90% but still. What options do i have to fix this? I am graphic designer so i sometimes do video editing in my macbook pro and i m quite sure some of those renderings are more system hungry than dota 2 and no drain while doing that. Thanks in advance.

What do you mean it didn't work? Are you having a battery issue that the update did not fix? Need some more info. If you look at the webpage that I linked to, it advises to have affected batteries replaced.
Identifying an affected battery
Affected batteries will have one or more of the following symptoms:
Battery is not recognized causing an “X” to appear in the battery icon in the Finder menu bar.
Battery will not charge when computer is plugged into AC power.
Battery exhibits low charge capacity/runtime when using a fully charged battery with a battery cycle count (as shown in System Profiler) of less than 300.
Battery pack is visibly deformed.
Note: If your MacBook or MacBook Pro battery does not have any of the symptoms noted above, your battery does not need to be replaced.
If you're replacing batteries every 3 months I would take a look at how you are maintaining your battery. Are you calibrating it when it arrives and then every 6 to 8 weeks afterword? Are you running graphically intensive programs? Do you have a lot of background process in your activity monitor that are taxing the system? Most folks I have seen post here find their battery issues resolved after a replacement, not recurring every 3 months.

MacBook and MacBook Pro Battery Update

http://www.apple.com/support/macbook_macbookpro/batteryupdate/
Apple has recently discovered that some batteries used in its MacBook and MacBook Pro notebooks may have battery performance issues. Apple is offering a software update that is designed to improve battery performance.
The battery update is available immediately via Software Update or downloadable here.
Note: The factors causing the performance issues do not present a safety risk. You may continue to use your current battery.
This battery update should be run on all MacBook and MacBook Pro computers and extra batteries that were purchased between February 2006 and April 2007.
If, after you have installed the battery update, your battery has any of the symptoms listed below, please make a reservation to bring your computer with its battery to your local Apple Retail Store, or contact an Apple Authorized Service Provider (AASP), or call your local Apple Support Contact Center. If Apple or an AASP determines that your battery is eligible for replacement, you will receive a new battery, free of charge, even if your MacBook or MacBook Pro is out of warranty.
For MacBook and MacBook Pro systems with Intel Core Duo processors, this program extends repair coverage on the battery for up to two years from the date of purchase of the computer.
Identifying an affected battery
Affected batteries will have one or more of the following symptoms:
Battery is not recognized causing an “X” to appear in the battery icon in the Finder menu bar.
Battery will not charge when computer is plugged into AC power.
Battery exhibits low charge capacity/runtime when using a fully charged battery with a battery cycle count (as shown in System Profiler) of less than 300.
Battery pack is visibly deformed.
Note: If your MacBook or MacBook Pro battery does not have any of the symptoms noted above, your battery does not need to be replaced.
Next Steps
To participate in this worldwide program, your MacBook or MacBook Pro battery must show the symptoms noted above. If it does, please make a reservation to bring your computer and battery to your local Apple Retail Store, or contact an Apple Authorized Service Provider (AASP), or call your local Apple Support Contact Center. The U.S. support number is 1-800-275-2273. If you are located outside the U.S., please see Apple's international contact list for your local Apple Technical Support phone number. An Apple technical support representative or an Apple Authorized Service Provider (AASP) will determine if the battery is eligible for replacement, free of charge. Customers are responsible for transportation costs to eligible AASPs and retail stores.
If a replacement battery is sent to you via airmail, it is important that you return the older battery to Apple so that it can be properly recycled.
This program extends repair coverage on the battery for up to two years from the date of purchase of the computer for Intel Core Duo-based MacBook and MacBook Pro computers. Apple will continue to evaluate the battery update program and will provide further extensions as needed. Apple also reserves the right to modify the program if other solutions that address the battery performance issues become available.

For MacBook and MacBook Pro systems with Intel Core Duo processors, this program extends repair coverage on the battery for up to two years from the date of purchase of the computer.
Pretty nice change for those C2D's

Does Adobe Photoshop Elements work with MacBook Pro with Retina display?

Does Adobe Photoshop Elements work with MacBook Pro with Retina display, please?
Have searched Adobe website for answer - most recent is 2013 answer, saying no.
Contradicted by a staff ember who only referred to Photoshop, not Elements.
Reason I need it is that iPhoto does not support very high resolution photos - which I have now scanned onto my MacBook and do not want to re-scan!! After 90 minutes at my local Genius bar (lovely folk, very conscientiously searching for an answer...), re-scanning was their final piece of advice.
Help, please...

Hello Smis,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues with your HP Monitor on your MAC. I am providing you with an HP Support document: Updating a Monitor Driver, where it states under the sub-heading Using HP monitors on a Mac "HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
This being said all I can advise is that you check to see that the monitor is set to operat at 60Hz and contact Apple for assistance if that does not get your monitor displaying correctly.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Time Capsule works with MacBook Pro (Mavericks) but not with IOS devices? recent problem starting March 1, 2015.

I have a Time Capsule version 7.7.3 (model A1470) which has worked fine for almost 2 years with all devices, Apple and otherwise. As of beginning of this month, March 2015 - no longer works with a new IPAD mini 3 and 6-month old iPhone 6 (both updated as of last night) BUT still works fine with MacBook Pro (Mavericks 10.9.5) and Epson printer XP-600.
On both IOS devices Airport Utility shows the Time Capsule and shows green light connection to internet, but never does the connection. The little status circle just keeps going round and never shows the Wifi rainbow symbol. both devices work fine on other Wifi's. Airport Utility on iPhone actually connects enough to check on Airport base station's firmware 7.7.3 and says it is up to date! but sadly stays on LTE.
Have tried resetting, replugging etc...
Also, tried checking on updates. Nothing shows in Airport Utility. When I try to go to see past updates ~/Library/Application Support/Apple/AirPort/Firmware to see if updated, there is no Airport in the Apple folder?
A mystery...

Reset the TC to factory and redo the setup. see details below.
Here is the typical list of things you should try.. and if this doesn't help post again.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer or perhaps it is better using iOS on the phone or ipad currently having issues.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. For iOS the fixed channels particularly for 2.4ghz has helped.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place makes for poor networking. If the TC is main router it will not be an issue. This is a problem for a TC in bridge mode.
If this is of no help.. what modem do you have? What function other than modem does it have.. ie none or router??
How is the TC connected into the network? What function does it have? Router or bridge for example.
Post a few screenshots of the setup.

HT204347 Do you connect the charger in the MacBook Pro battery damage if using device ?

Do you connect the charger in the MacBook Pro battery damage if using device ?
i am sorry i not good speak english

Provided you are using the correct charger for your Mac (13" have a 65 watt charger, 15" and 17", an 85 watt charger), it has enough capacity to power the computer for normal tasks, and the leftover power can charge the battery at the same time. If you are doing something very intensive, there may not be leftover power, but the Mac will take power from the battery if needed. Once the battery is fully charged, the pilot light in the charger plug will change from orange to green and no further charge will be applied to the battery.
You can use your Mac plugged to the charger with no damage to the battery or the computer.

I need help to decide which macbook pro is best for photo editing, editing movies and doing all the rest too like excel, word etc. 13"

I need help to decide which macbook pro is best for photo editing, editing movies and doing all the rest too like microsoft office products ...excel, word etc. I am new to the apple world and have liked the idea of the MAC Book Pro 13" but really dont know if this is good enough or if the computer will soon crash?
13-inch: 2.6GHz
with Retina display
Specifications
2.6GHz dual-core Intel Core i5
Turbo Boost up to 3.1GHz
8GB 1600MHz memory
512GB PCIe-based flash storage1
Intel Iris Graphics
Built-in battery (9 hours)2

That's a fine machine and, with 8GB of RAM and 512GB flash storage should serve you well for light video/photo editing as well as for 'normal' usage. And it should last you for years to come.
Good luck in making your decision!!
Clinton

My MacBook Pro battery is empty and won't charge, but charger is fine

My MacBook Pro battery is empty and won't charge. I did the PRAM reset when there was still some power left in the battery. The charger indicator light doesn't come on when I connect it to MacBook Pro, BUT it works just fine with my old white Mac book. This happened a few times before, and unplugging and plugging the adapter into the MacBook pro helped. Now nothing happens no matter how many times I reset the charger. Is there anything else I can do?

More than likely you need a new battery.

Need a little help with syncing my iPod.

I got a new macbook pro for cristmas and a few cds. After i tried to sync my ipod to itunes i put a symbol next to each song that i got from other cds saying that they were downloading but they werent. Also the cds i downloaded to my ipod for the first time didnt appear at all. Need help.

/Re: Need a little Help with my new xfi titanium? ?
ZDragon wrote:
I'm unsure about the first question. Do you even have a 7. system and receiver? If you just have 5., you should be able to remap the audio in the THX console.
I do have a sony 7. reciever str de-995 its an older one but its only for my cpu. At first i didnt even have THX installed because it didnt come with the driver package for some reason until i downloaded the daniel_k support drivers and installed it. But it doesnt help in anyway.
I have checked every where regarding the first question and alot of people are having problems getting sound out of there rear channels and the sound being re-mapped to the surround right and the surround left as if there rear left and rear right.
I read somewhere that the daniel_k support drivers would fix this but it didnt for me and many others.
For the second question i assumed it would be becasue of the spidf pass through and that my onboard sound card was inferior to the xfi titaniums. But i wasnt sure and i was hopeing that someone would have a solution for that problem because i miss controlling the volume with my keyboard.

Can I solve a 2011, 13', macbook pro battery problem

After a local area power cut, my 2011 13' Macbook Pro battery symbol in the menu bar instantly showed that there was a problem with the battery, which had previously shown a 98% charged (full), but now advised me, via a help document that appeared when I clicked on the symbol, that I would need to get my battery serviced as it is not running/charging properly. Perhaps I was remis in not dealing with the problem sooner, but this morning, some 8 months later, the normal battery symbol simply has an X on it. The battery has completely died now and my otherwise incredible Mac will only work when conected to a power source. Is there anything I can do to 'reboot' or reconfigure the battery without paying for a new battery? Many thanks in advance for any help on this.

Try an SMC reset.
Resetting the System Management Controller (SMC) - Support - Apple

Need a little assistance with Macbook Pro Battery....

Similar Messages

Maybe you are looking for