Need a lot of responses!

Hey, My phone is still "broken". I can't even turn it on now. Does anyone know what can help? I have taken it to verizion and they tried to restore it to the factory setting and it went through and then all at the end it said error (21). I tried turning it on today and it didn't turn on. Then i pulled it in to the charger and it said connected to itunes when i wasn't even connected to my computer. Does anyone know what to do? or has this problem in the past? Please help me!

It did not say "connected to iTunes". What you saw was the indicator that it is in recovery mode and you need to plug it into your computer running iTunes and restore it.

Similar Messages

Report RSXMB_RESTART_MESSAGES needs a lot of resources

Hi,
we are using PI 7, SPS9.
When we have a heavy load in XI, we are getting sometimes JavaNullPointer-Exceptions in Java-mappings, so we have to restart these messages - no problem!
There is the report RSXMB_RESTART_MESSAGES to restart failed messages, but when I defined it as a job (every 1 hr) and during this time we have a lot of messages (but only some are failed), the job never ends and it needs a lot of resources!
In the queues I can see a lot of entries made by the report.
Our report still have the field "max restarts" and I entered 5 restarts!
What can I do?
Thanks a lot!
regards
Wolfgang Hummel

Hi Sandro,
thanx for your answer.
This is a test system and at the moment I just defined jobs for deleting and not for archiving.
My problem is, that we have a sender with thousands of messages via the same interface for the same receiver and sometimes a message failed ('cause of NullPointerException in java mapping).
To define a filter in the report RSXMB_RESTART_MESSAGES is no solution 'cause the filter cannot reduce the number of messages (it's always thousands of messages).
When the job starts during less traffic, I don't have any problems - it's just a problem during heavy traffic.
regards
wolfgang

Need to create a response for online amount transaction

hi everyone,
i need to develop a response page for an online amount transaction. its a jsp page and i need to check whether the transaction is successful or not and need to give a message to the user along with the transaction details. i can't able to get the message from the response page that is from the bank site. please help me to find how to do this..

Hi ,
       Check out this exits.
SDTRM001            Reschedule schedule lines without a new ATP check
V45A0001            Determine alternative materials for product selection
V45A0002            Predefine sold-to party in sales document
V45A0003            Collector for customer function modulpool MV45A
V45A0004            Copy packing proposal
V45E0001            Update the purchase order from the sales order
V45E0002            Data transfer in procurement elements (PRreq., assembly)
V45L0001            SD component supplier processing (customer enhancements)
V45P0001            SD customer function for cross-company code sales
V45S0001            Update sales document from configuration
V45S0003            MRP-relevance for incomplete configuration
V45S0004            Effectivity type in sales order
V45W0001            SD Service Management: Forward Contract Data to Item
V46H0001            SD Customer functions for resource-related billing
V60F0001            SD Billing plan (customer enhancement) diff. to billing plan
SDAPO001            Activating Sourcing Subitem Quantity Propagation
Check some of badi .
Please reward if useful.

I use itunes on a Dell XPS502 with W7/64. In some cases have have problems to import CD's. The sound is very disturbed and the import need a lot more time than in normal cases. Is there a problem between itunes W7/64 or a known hardware issue?

I use itunes on a Dell XPS502 with W7/64. In some cases have have problems to import CD's. The sound is very disturbed and the import need a lot more time than in normal cases. Is there a problem between itunes and W7/64 or a known hardware issue?
Example-CD : "Tracy Chapman , Telling stories" is not able to import . I have more such negative cases. But in other cases it works fine and the sound is great.
The firmware at the inbuild CD/DVD DS-6E2SH is the latest version.
What can I do??

hi b noir,
I don't no about virtuel drives like you mententioned. In the mean time I have rebooted the XPS and run again the iTunes diagnostics. I think the back - chance in the registry was not ready to use. Now there are another results. They are the same in case of a running CD or a not running CD. The difference in total is like before. It takes more time that iTunes reads the (bad) CD and at the there is no good sound. In both cases ( running or not running CD) iTunes diagnostics gives as a result :
(the copie from ITunes shows the result of the not running CD from Tracy Chapman)
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Dell Inc. Dell System XPS L502X
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater-Bibliothek 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Treiber 1.55.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes-Seriennummer 00D7B2B00CD25750
Aktueller Benutzer ist kein Administrator.
Aktuelles Datum und Uhrzeit sind 2011-06-11 19:33:22.
iTunes befindet sich nicht im abgesicherten Modus.
WebKit Accelerated Compositing ist aktiviert.
HDCP wird unterstützt.
Core Media wird unterstützt.
Info zu Video-Anzeige
NVIDIA, NVIDIA GeForce GT 540M
Intel Corporation, Intel(R) HD Graphics Family
**** Info für externe Plug-Ins ****
Keine externen Plug-Ins installiert.
iPodService 10.3.1.55 (x64) arbeitet zurzeit.
iTunesHelper 10.3.1.55 arbeitet zurzeit.
Apple Mobile Device service 3.3.0.0 arbeitet zurzeit.
**** CD/DVD-Laufwerkstests****
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
D: PLDS DVDRWBD DS-6E2SH, Rev CD11
Audio-CD im Laufwerk
11 Titel auf der CD gefunden, Spieldauer: 42:07 auf Audio-CD
Titel 1, Startzeit: 00:02:00
Titel 2, Startzeit: 03:59:47
Titel 3, Startzeit: 07:19:27
Titel 4, Startzeit: 11:31:30
Titel 5, Startzeit: 15:31:50
Titel 6, Startzeit: 20:07:50
Titel 7, Startzeit: 24:27:15
Titel 8, Startzeit: 27:49:10
Titel 9, Startzeit: 32:41:25
Titel 10, Startzeit: 35:29:65
Titel 11, Startzeit: 38:38:00
Audio-CD erfolgreich gelesen (Suche nach alter Firmware).
Laufwerksgeschwindigkeit erfolgreich erkannt
Die CDR-Geschwindigkeiten des Laufwerks sind: 4 10 16 24
Die CDRW-Geschwindigkeiten des Laufwerks sind: 4
Die DVDR-Geschwindigkeiten des Laufwerks sind: 4
Die DVDRW-Geschwindigkeiten des Laufwerks sind: 4
After starting the import it is going slower and slower. If it is helpful I can send you a soundfile with these distortions.
best regards
tcgerd

LOVE Firefox! I have just launched a website. One designer told me it takes 7-10 days for any changes to appear. Why? I have cleared caches and cookies etc. I need to be more responsive than 7-1o days. I need changes to appear within 24hrs.

LOVE Firefox! I have just launched a website: www.animalhealingandhumans.com. My web designer told me it takes 7-10 days for any changes to appear. Why? I have cleared caches and cookies etc. I need to be more responsive than 7-1o days. I need changes to appear within 24hrs. How can I achieve a much better response time to good feedback?

Hello binbingogoABC,
Shopping on BestBuy.com should be easy and fun and not fraught with the kind of trouble that you describe. I regret very much that this has been your experience.
Using the information you provided when you signed up for Best Buy Unboxed I was able to locate your cancelled orders. I have requested more information from my back-office partners. As soon as I have additional details about your situation, I will reply again to this message. In the interim, I'm sorry that I must impose upon your patience.
I'm very grateful that you wrote to us with your concerns.
Sincerely,

I had downloaded a pair of albums, and i can´t see it on my iTunes library, neither in downloaded..., i had downloaded a pair of albums, and i can´t see it on my iTunes library, neither in downloaded... I need a lot of help please.

i had downloaded a pair of albums, and i can´t see it on my iTunes library, neither in downloaded...,. I need a lot of help please

Do the tracks show up in the Recently Added playlist? If so then something has gone wrong with the index of the Music playlist. Download the current iTunes Free Single of the Week. I know it sounds odd, but it should fix the problem. (Probably adding anything would do.)
If that doesn't work close iTunes and delete the hidden file sentinel from inside the main iTunes folder, then start iTunes again. It should run a consistency check when it starts up.
tt2

Aperture 3 needs a lot, lot, lot of space ;)

As you can see sometimes Aperture needs a lot of space, to do just update. Can you imagine how much space it will need for whole backup?
+PS: Library size is around 70GB+

I'm getting exactly the same message now - were you able to backup eventually?

Need a lot of custom JComponents, but Java just too 'slow', other Solution?

Hi folks,
first of all i'll try to explain my problem (although my english is quite bad)
We're programming a tool for visualising graph algorithms (df search, strong connected components, transitive reduction etc.) For that, we got a drawing area (derived from JLayeredPane) which contains the Nodes and the Edges of a graph (for all that don't know what a graphs is, just imagine these nodes as numbered circles, and the edges as directed lines from one node to another).
Both parts (Nodes and Edges) are derived from JComponent, because a) need MouseEvents on these Components and b) we need the ability to add them to a container (like JLayeredPane)
An absolute requirement is that you can directly click on the edges (to mark them, or delete them etc)
Another point which needs to be mentioned, the edges maintain a (invisible) polygon which lies around their line, this polygon is sensitive for mouseEvents.
Now there are two main problems:
* all these edges have (due to JComponent) (possibly) huge invisible rectangles (the only thing that really matters is the line from one corner of this rect. to the other) ...so if i got lets say a graph with 10.000 edges, there are a lot of edges that overlap (nearly 10.000 :) ) ... but only the Edge-object on top receives the MouseEvent (but perhaps the user wanted to cklick a edge that lies below the top-edge!) .. at the moment, the program looks at all edges below that which received the MouseEvent and checks wether the 'mouse'click' hits a polygon, If it does, the top edge dispatches the MouseEvent to that edge. (furthermore, due to the depth-order in a Layer of a JLayeredPane, we only need to look at all edges that are really below the egde that received the mouseEvent)
This all works great for 'small' numbers of edges (approximately 1000-2000) but with a rising number of edges this attempt gets slower and slower (it takes 1-3 seconds to evaluate a single mouseclick on a Sun Ultra 5/333)
* the bigger problem is, that if i got 10k+ JComponents in a Container Java gets really slow, just adding these 10k JComps. (to the JLayeredPane) takes some minutes?! Furthermore java consumes up to 200+ MB main memory in this situation.
One solution we are currently thinking about is to implement these edges as 'pure graphics'-objects (for example the Container just draws all edges).. this probably solves problem # 2 but # 1 gets even worse (no depth-order, some more coordinates hassle)
So, i hope someone can give me a hint for this problem or someone has had a similar problem before and has a good solution? (if the problem isnt clear, just ask)

I worked on an application once that had a similar structure as yours, but we were only scaling up to about 1000-2000 components. The problem that we identified (and that you have, no doubt, also identified) is that you are searching all of the child components on every hit test/overlap test. What we did was to subdivide out outermost container so that it had a couple of dozen children, each of which then parented some of the original child components: this cut our search space for every hit test dramatically. We had the advantage of having collections of child componenents that we knew would not overlap so our first level containers did not overlap -- you may need your first level containers to overlap, but even with this, you'll still be able to much more quickly identify components in the immediate region that should be checked individuall.

I want to update forms in the response file and save it. Sometimes it works, but often I need to save the response file in another name. Very inconsequent! How come?

I have a form that I am sending out and compiling in the response file. These forms I also want to be able to update after receiving them (when I have them in the response file).
But when I do the updates I need to re-save the response file with another name? The strange thing is that sometimes I can just update and save exactly the way I want it. But most of the time I get the message "This file may be read-only, or another user may have it open. Please save the document with a different name or in a different folder."
Can someone please help me to figure out how to solve this issue. I know that I am the only one that has the file open. I am encountering the same issue in both Acrobat Pro 9 and Acrobat Pro X. (File was created in Acrobat Pro 9)

Good day!
A simple Paste does not work for you?
It should place the clipboard content as a new Layer which you can then move around.
If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
Regards,
Pfaffenbichler

ITunes is black, need a lot of help!

I just downloaded the new iTunes 7.7 today. When I opened it up, the whole screen is black. Some of the words (like File, Edit, Controls...<on the top>) are in white, but everything else on the screen is black. I tried to minimize and maximize, but nothing changed. I restarted my computer..then I uninstalled and reinstalled, but still nothing. I am having problems, and I am getting so frustrated. Please, If you know anything please help. (I have looked at other sites for this problem, but still no help. I tried to go to compatibility and disbling some stuff as one site told me to, but it did not help.)

mm3mm wrote:
none of this will compile and i am missing a lot.Stop right now, scrap this code and restart as this line above alone tells me that your going about your coding all wrong, that you're trying to add code to already bad code. What you need to do is this:
1) Plan first. Before committing a single line of code, write a general outline for your program and then flesh it out (all on paper).
2) When you start writing code, do it in small bits at a time.
3) After adding a small bit of code (a few lines) try to compile the code to see if there are any compile errors.
4) Here's the important part: if you find any compile or run errors, then stop, do not add any more code, but instead fix the code you have. The key is that you should never add good code to bad.
5) Then only after the code is fixed, continue with step 3) and loop this process until done.
Best of luck.

Installation Directory BO/InstallData/InstallCache/ needs a lot of space

HI together,
maybe someone of you know a solution?
We have installed a BO4.0 Enterprise Server, and we installed a lot of patches since now.
The installation directory (BO/InstallData/InstallCache/) needs now a lot of space.
Is it possible to reorganise this directory or is it possible to delete some files?
Thanks in advance
David

Hi David Bartuli,
Run Disk Cleanup you will get some space.
Right click the drive Select Properties. Click Disk Cleanup....
If you want to reduce the number of unnecessary files on your hard disk to free up disk space and help your computer run faster, use Disk Cleanup. It removes temporary files, empties the Recycle Bin, and removes a variety of system files and other items that you no longer need.
Edited by: pardhasaradhi.t on Oct 9, 2011 5:22 PM

ICloud email needs a lot of work

Does anyone know if/where Apple has a place to report bugs with iCloud.com apps?
The email app is pretty unstable. Most of the time, searching doesn't work at all. It just spins for a while and then tells me that it can't complete it right now. Most of the time, composing new messages doesn't allow me to attach anything to the message. Just throws up a weird error. Sometimes attachments work just fine. There's almost no rhyme or reason to it.
And finally, the iCloud.com mail app itself is incredibly slow.
Definitely a lot of work needed. Earthlink's email client was better 5 years ago.
Sean

i think things will be better tomorrow. Tomorrow is IP6 Day.

Need help with XML response to refresh document with context and prompts

I've been working with the Restful api for a few weeks now and have been able to figure out most of what I need to automate testing of our reports. However, one task that I have not been able to figure out is how to refresh a document that contains both a context and two prompts for dates.
Here is what I have tried, and what the API responds with.
1) I queried the API for this document's parameters using the following call after logging in -
headers = {:accept=>'application/xml', :content_type=>'application/xml', :x_sap_logontoken=>@token}
url = "http://our.url.net:6405/biprws/raylight/v1/documents/12345/parameters"
RestClient.get(url, headers)
The response from the API is:
<parameters>
    <parameter dpId="DP0" type="context" optional="false">
        <id>0</id>
        <technicalName>cQuery 1</technicalName>
        <name>Select a context</name>
        <answer type="Text" constrained="true">
            <info cardinality="Single">
                <lov partial="false">
                    <values>
                        <value id="CTX_1">LOAN</value>
                        <value id="CTX_9">LOAN_APPLICATION</value>
                    </values>
                </lov>
                <values>
                    <value id="CTX_1">LOAN</value>
                    <value id="CTX_9">LOAN_APPLICATION</value>
                </values>
                <previous>
                    <value id="CTX_9">LOAN_APPLICATION</value>
                </previous>
            </info>
            <values>
                <value id="CTX_9">LOAN_APPLICATION</value>
            </values>
        </answer>
    </parameter>
</parameters>
2) This tells me I need to supply a context, so I then replace my RestClient.get call with a RestClient.put call with the following payload:
<parameters>
     <parameter>
            <id>0</id>
            <answer>
                  <values>
                        <value id=\"CTX_9\"/>
                  </values>
            </answer>
      </parameter>
</parameters>
3) This satisfies the context portion of the refresh. The API replies with the following response, telling me I need to answer two prompts -
<parameters>
     <parameter dpId=\"DP0\" type=\"prompt\" optional=\"false\">
          <id>1</id>
          <technicalName>psEnter value(s) for Start Date of Application Received Date</technicalName>
          <name>Enter value(s) for Start Date of Application Received Date</name>
           <answer type=\"DateTime\" constrained=\"false\">\
                <info cardinality=\"Single\"/>
           </answer>
     </parameter>
     <parameter dpId=\"DP0\" type=\"prompt\" optional=\"false\">
            <id>2</id>
            <technicalName>psEnter value for End Date of Application Received Date</technicalName>
            <name>Enter value for End Date of Application Received Date</name>\
            <answer type=\"DateTime\" constrained=\"false\">
                <info cardinality=\"Single\"/>
            </answer>
      </parameter>
</parameters>
4) Here is where I am having problems. I have tried all kinds of permutations of the below payload/response body. All I ever get from the API is a 400 - BadResponse error.
<parameters>
     <parameter>
          <id>0</id>
          <answer>
               <values>
                    <value id=\"CTX_9\"/>
               </values>
          </answer>
     </parameter>
</parameters>
<parameters>
     <parameter type=\"prompt\">
          <id > 1 </ id>
          <answer type=\"DateTime\">
               <values>
                    <value>2012-06-11T09:50:54.000-04:00</value>
               </values>
           </answer>
     </parameter>
     <parameter type=\"prompt\">
           <id > 2 </ id>
           <answer type=\"DateTime\">
                <values>
                     <value>2014-07-11T09:50:54.967-04:00</value>
                </values>
           </answer>
     </parameter>
</parameters>
I am not very good with XML and the terminology around it, and I haven't received much training around using the Restful API other than the SDK documentation. I have a feeling there is something very basic that Im missing here. What is the correct XML needed in the response body to properly refresh the document?

If you are more confortable with JSON, Raylight supports it as well.
Best regards,
Anthony

I need a lot of green..

I need to create a topo plan, and need a green pallette, with gradual tone changes, from light to dark.
Whats the easiest way to get this. Tryed making my own (miss out a lot of tones, so creates jumps in colour).
I would like to be able to load a new swatch pallette... Any help ??

make your lightest and darkest green swatches, make a blend between them of however many steps you need and use those maybe?

Need Inspection lot creation at only one storage location level - QA07

Hi,
I have shelf life expired material at different storage location. When ever i run QA07.System generates inspection lot for all storage location.But I want to process the inspection lot for only one storage location. Please guide me how can we map this reqmnt.
Thanks in advance for your relevent response.
Thanks & Regards
Kundan Kumar

Hi,
Next inspection date is maintained at the batch level, not at the storage location level.
You can suggest the following solutions if it is feasible in your business scenario.
Scenario 1: Batch is inwarded in one storage location"A" & stored for some time, then it is transfered to other storage loactions B & C (like production storage locations).
In this case suggest to transfer the batch to storage loactions B & C just one or two days before the actual consumption of the batch & also keep the opening period in QA07 sufficient days (between 10-15 days), so that the sytem will create the inspection lot in one storage location "A" . Since the batch is still not transfered to B & C, the system will not create inspection lots in B&C.
Scenario 2: Batch is inwarded in all the storage locations with the same batch number.
In this case suggest to inward the same bacth with different batch numbers, keeping the all other characteristic values same
With Best Regards
Vithal

Need a lot of responses!

Similar Messages

Maybe you are looking for