Need a Main Indicator and assign it to a buttton!

Dear All,
I have multiple opportunites associated with my BO , user needs a provision where he can select any opportunity and make it a MAIN Opportunity!
I checked there's a similar a fucntionality is there with Contact Tab in Account TI where u can select a contact as main contact using a button. they have taken a dedicatedfield field and given in the properties of the button....
but i am not getting how do they link it to Bo model field!  i mean how that field know which contact has main indicator checked?
Please suggest how do i achieve this functionality in my cuystom TI with custom Advanced list pan

closed. solved.

Similar Messages

  • Serial Number assignment for main items and sub items

    Hi
    All, good evening, i need clarificaction on the serial number assignment. My client's requirement is to maintain the serial numbers, so in this regard when i am confirming production order in this i need some information how the serial numbers are picked and consumed for main items and the sub items.
    I need someone to help me in solving this.
    Regards
    Narsing

    dear Narsing,
    please look here:
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/f8c817b3f911d1896e0000e8284931/frameset.htm

  • Main VI and subvi indicator

    Hi,
    My sub-VI outputs 10 different things, 4 things at a time. It has a continue button that blinks when one set of output is finished, and the sub-VI will continue after the user clicks on this continue button. Right now I am writing a main VI that will control this sub-VI along with some other sub-VI. I have an input and output cluster in my main VI to send and receive info from the sub-VI. But I am having a problem with making this continue button works. In my output cluster in my Main VI, I have a continue button just like the one in my sub-VI. In my sub-VI, I have a "blink yet?" indicator to indicate when the program has finished taking a set of data. In my Main VI, I use get control value method to set the blinking property of
    the Main VI's continue button. This button blinks fine, but when it blinks, I cannot click on it to change its value, does anyone know why or know of a better way to do this?
    Thanks.

    Hi,
    It sounds like you almost want to use this continue button as both an indicator as well as control. Unfortunately, LabVIEW does not allow both. To work around your issue, use the continue button as an indicator and have it blink when the output of the subVI is finished. Then, use an event structure to take in when the user clicks on the button. When the continue button is pushed, then use a property node to then set the continue button to stop blinking.
    The following tutorial should be useful:
    Event-Driven Programming in LabVIEW
    Also, I have attached an example program that demonstrates using the event structure in LabVIEW with a boolean.
    Good luck!
    Kileen C.
    Applications Engineer
    National Instruments
    Attachments:
    booleanvaluechanged.vi ‏13 KB

  • Need a help to create user and assign BP to it

    Hi,
    I have requirement to create Users (like SU01) in CRM and for that users need to create BP with role EMPLOYEE and assign BP to that USER.
    Can anybody please help on which Function Module I need to use to create user and assign BP to it.
    Thanks in advance..
    Sushant

    Hi,
    Many post post are there for your query in SDN search if my below shown link is not helpful.
    Hope the below will help you.
    Users Created ...
    Cheers!!
    VEnk@

  • Need a script to Create Users and assign Responsibilty

    Hi,
    EBS R12
    DB 10.0.2.4
    I need to create 100 application users and assign a responsibilty with them.I do not want to create a single user everytime using sysadmin responsibilty.Give some idea about it.
    Thanks

    Use FND_USER_PKG API.
    Please see old threads for similar discussion -- http://forums.oracle.com/forums/search.jspa?threadID=&q=FND_USER_PKG&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • I need to remove myself as the primary administrator for a CC acount and assign to another administrator. How should I proceed?

    I need to remove myself as the primary administrator for a CC acount and assign to another administrator. How should I proceed?

    adobe forums, only to discover Adobe doesn't allow a primary admin to ever leave. This is rather silly as people leave workplaces, they don't stay for life. An answer in a different forum on this site said one must cancel their adobe account, then start a new one. Though... Adobe doesn't allow a person to cancel their adobe account. It all must be done via Adobe customer service, which has proved non existent. There is no email address to email a request, there is a chat option which claims 24/7 chat however this functionality doesn't seem to work on my new Lenovo computer, current IE explorer running Windows 8.
    Adobe - you really need to sort this out. I have left the work place where I was the Team Administrator some months ago now and now I need to be removed from that workplace account completely. Currently, I still have full access to it, which is not good from a security point of view because if I were a disgruntled ex-employee I could play havoc with my workplaces subscription and access their confidential files stored in the cloud.
    Looking through the Forum, there is a great deal of conversation on this exact point. I'd suggest you answer this one, then create a sticky so people don't keep creating new threads and then see about resolving the issue so that Primary Admins can change in future, and be removed when they leave the workplace.
    Thanks
    Geoff

  • Can't rename folder in main directory and changes need to be authenticated

    This just started today: I can't rename folders in my main directory, and I can't move anything in or out without authenticating. Yesterday I had remote tech support working to fix Parallels, and I suspect that the tech support guy changed a setting, but I can't find it to change it back. Ideas, anyone? Please advise.
    Thanks,
    Karen

    Select the main directory in the Finder, choose Get Info from the File menu, and give yourself Read & Write access under Sharing & Permissions.
    (43510)

  • Macbook Pro main keyboard and mouse not working!!! Help desparately needed

    Dear anyone!
    My the main keyboard and mouse are not working!!! Right now I connected an external keyboard and external mouse to the usb port, and those are working.
    What should I do to make the main keyboard and mouse work?
    Note that this started to happen when I was using Parallel (Windows on mac)
    Any input is GREATLY appreciated!!!
    Thanks!

    Hopefully someone will be able to recognize what is going on here and be able to help you. If not, are you in Madison, Wisconsin? If so, I believe you have an Apple Store. You can always make an appointment with the genius bar and get help that way. The genius bar is free. Your keyboard problem sounds like some sort of a software glitch to me, and it shouldn't be too hard for someone knowledgeable to fix.
    There is one thing you can do which might or might not help, but it is a good thing to do on a regular basis. Go to your Applications folder and find your Utilities folder and then find Disk Utility and drag it down to the dock. Open it and click on your hard drive by brand name in the left column and then on the First Aid tab. Click on "Repair Disk Permissions" and repeat until all disk permissions have been repaired. It might take several times. You can safely ignore the SUID warnings--they are a known issue which will probably be fixed later on. Repairing permissions is something you should always do before and after installing software--it's just good practice and will prevent many problems that can arise if you don't do this on a regular basis.
    Good luck!

  • Need a bapi which creates and assigns notification to maintenance order

    Hi,
       I am currently using a bapi "BAPI_ALM_ORDER_MAINTAIN" in PM  to create an order with its operations. Now my requirement is to create and assign a notification to certain types of orders. This bapi is not able to handle notifications.
    Thanks
    Pradeep

    Hi Karthikeyan,
    Since this issue is resolved long back I don't remember everything related to it. But as far as I remember, the behavior of transaction IW32 is such that, while saving the work order, it cross checks with table T350. If field "NOTDAT" in T350 is checked for that order type  then it automatically creates a notification and assigns to that order. I just made use of this behavior and used BDC approach to solve this issue.
    Hope the things are clear.
    Regards,
    Pradeep.

  • Discontinuation indicator and follow up material.

    Hi,
    I am facing the strange issue for which i need your expertise. The requirement is like:
    1. "X" material is discontinued and "Y" is as follow-up in two plants A & B. Discontinaution group and follow-up group has also been assigned in the BOM.
    2. Now The client want to reverse the settings . means "Y" should be discontinued and "X" should be follow-up in both plants A & B.
    Now I have removed the discontinuation indicator and follow up material from "X" in both plants. But when I am going to discontinue the "Y" material and putting " X" as a follow-up material, The system is giving the message "The specified follow-up material results in recursiveness
    Message no. M3609
    Diagnosis
    You have entered a follow-up material. However, the BOM explosion for the follow-up material leads to the discontinued material, resulting in unpermissible recursiveness.
    Procedure
    Enter another follow-up material or cancel the entry.
    Please suggest me where I am missing in my settings and what is the reason for this message.
    Regards
    Deepak Sharma

    Dear ,
    Check the following  :
    1.Validity of the Bill Of Material or any deletion flag is set in the present BOM.
    2.Please check the following SAP notes :
    Note 161742 - Consulting note: BOM recursion/low-level code 999
    Note 839879 - Trace 'BOM is recursive'
    Note 139517 - Recursiveness for follow-up materials
    Note 42891 - Recursiveness check
    Hope this will help you to figure it out
    Regards
    JH

  • Main screen and dock move to second display

    Hi all,
    although i found many replies regarding to how to get the dock to the desired screen i face the following problem.
    I am a vj/dj using serato dj, mix emergency and madmapper. Whenever i connect a second display to my macbook (macbook pro early 2013 retina, now on OS 10.9) the main screen and dock is transferred to that second display (e.g. projector). These softwares need to run to the main screen only, and this should be my laptop's screen.
    Even if i get the dock back to my macbook display, these softwares recognise as MAIN display the external one and not my macbook pro's display.
    I am facing this problem since my OS upgrade to 10.9 from 10.8!
    Can i do something to my macbook so as to always recognise its own display as the main display? Does this problem exist on Yosemite as well?
    Can i downgrade to 10.8 if all the rest fail?
    Regards

    Hi konstadinos.k,
    I understand you want your MacBook Pro to be the default display for your DJ software when you have a second display connected to it.  Take a look at the article below that explains all of the options for extending or mirroring your displays. I've highlighted some key information below that may be helpful in your situation.  Even though the article is for Mavericks, the info should still be applicable.
    OS X: Using multiple displays in Mavericks - Apple Support
    http://support.apple.com/en-us/HT202780
    You can also assign an app to a specific display space from the app's menu in the Dock. Windows assigned to a space always open there when the display you specified is connected.
    The blue boxes in Displays preferences represent each display that's connected. The size of each box is relative to the current resolution of each display. In this example, the smaller box on the left is the display of a 13" MacBook Pro while the larger box on the right represents the Apple 27" Thunderbolt Display.
    Drag any of the blue boxes to change the location of a display in relation to your additional screens. You can use this feature to make sure your connected displays match their real world location when navigating windows. The white bar at the top of the blue box represents the menu bar. Drag the white bar onto the blue box representing the display you want as your primary display.
    Hope that helps ...
    - Judy

  • Creating/Copying Z Objects and assign them to Tables/Structures/Programs...

    Dear Colleagues,
    I am failry new to ABAP,as I have mainly functional MM/SD/WM/
    I need to be creating a fileld such as the one seen below( ZZLOOM).This is already showing on the transactions CO02/CO03(production orders).
    Can you please therefore give me step by step rough guide how to create this field and assign it to the program and the table/structure?To which program needs this to be assigned on SE38? Is it the screen data program SAPLXCO1 or the field desciption for batch input program SAPLCOKO1-please see below.
    Can I create the new (ZRAL) object by copying from the above (ZZLOOM) and on which Tcode I can do this?The program SAPLCOK01 is used(according to se38) on programs,ckasses and BSP applications.
    Program Name SAPLXCO1
    Screen number 0100
    Program Name SAPLCOCU
    Status VVKOPF
    Table Name ZWRK_CI_AUFK
    Field Name ZZLOOM
    Data Element ZZLOOM
    DE Supplement 0
    Screen Field ZWRK_CI_AUFK-ZZLOOM
    Program Name SAPLCOKO1
    Screen Number 0115
    All help appreciated,
    PAPJ1.

    Hi Archana,
    I'm simply trying to add a field such as the existing ones showing up on the customer screen tab of CO02/CO03,so I copied ZZNESTNO (shown as NEST below) into a new field called ZZRALNO.
    Mec MBW Start 18.05.2011
            End   18.05.2011
    Ele SS  Start 23.05.2011
            End   23.05.2011
    Nest          17c
    CoilNest
    Pipe          16/05
    Loom
    COIL WIP
    COIL DATE
    Through F1,I found out the field details of ZZNESTNO,shown below:
    Program Name     SAPLXCO1
    Screen number    0100
    Program Name     SAPLCOCU
    Status           VVKOPF
    Table Name       ZWRK_CI_AUFK
    Field Name       ZZNESTNO
    Data Element     ZZNESTNO
    DE Supplement    0
    Screen Field     ZWRK_CI_AUFK-ZZNESTNO
    Program Name     SAPLCOKO1
    Screen Number    0115
    This is what I am trying to achieve-Is this any clearer?
    Thanks a million for your help.
    PAPJ1.
    Edited by: PAPJ1 on Jun 8, 2011 4:37 PM

  • Indicator and Control in one

    I am trying to construct an numeric control which will specify the width of the image a camera has to obtain.
    However, when I read out the current settings, I want the current number to also appear in the same numeric control, so it needs to act like an Indicator.
    How can I do this in Labview?
    I've tried with a local variable, but that didn't work. (maybe I did it wrong?)
    I use matlab 7.1

    Arend,
    I couldn't find any local variable or Property value node in your main VI block diagram.
    Did you create a copy of your controls in a subVI and used a local variable in the subVI? If I'm right, it won't work. The controls in the main VI and in the subVI are not the same.
    You can "return" the value from the subVI and use a local variable in the main VI with this value or, if you need to update the values during the subVI execution, you can pass a  reference of this control to the subVI and use a property node in the subVI.
    Rasputin
    LV7.1 <> W2K
    Attachments:
    Main.vi ‏21 KB
    subVI.vi ‏11 KB

  • How to develp a subreport in the same page of the main report and processed when is called

    SSRS 2012
    Hi guys,
    I am developing a report that includes a subreport.
    therefore The report is made up by 2 sections:
    1) Show a grid (several rows - may be 100 or more - and some columns). It represent high level info  (Each row represent a specific item)
    2) The user click on a Row/column (eg: Item1, to see details that must be shown as graph.
    Here the problem: Searching info about SSRS reporting for subreports, drilldown, nested report and so on, no ones accomplish the requirements for the following reasons:
    1) Subreports: NOT open in the same page. The user must <go back> to see detail for other items, such as Item 2....
    2) Nested and DrillDown: Process data as the Main report (they are hidden and displayed after user action). In my case this leads to performance problem, because: if the main report has 200 objects (it means 200 graphs processed and hidden at the same time
    for the main reports).
    3) DrillThrough and Subreport: The detail data are processed only when the user select the interested item in the main report. Here the problem: the report is shown externally.
    Please, it there any possibility to have a subreport (or anything else) to be executed in the same report as the main report and processed only when the user make action?
    Thanks for your help.

    Hi Fasttrack2,
    According to your description, there is a main report with more than 100 rows of summary information, when users click the item of the row, the report need to jump to detail information shows as graph. The problem you are facing is that you are not sure
    subreport, drilldown or drillthrough report should be used? You hope to set display detail information in the main report and keep high performance of report.
    In Reporting Services, each subreport instance is a separate query execution and a separate report processing task. Subreports are recommended when there are just a few subreport instances. We should not use subreports inside a group when there are many
    group instances, instead, consider using drillthrough reports. Drilldown reports process all data even when the data is first hidden. In order to improve the performance of the report, we can split drilldown reports into parameterized drillthrough reports,
    because Drillthrough reports do not run until a user clicks the drillthrough link in the main report.
    In this case, we can consider using drilldown or drillthrough report. In drilldown report, when we click a plus or minus button to expand or collapse a section of a report, the detail data will be displayed in place. By using drillthrough report, when we
    click the link in the main report, the detail data will be displayed, we can come back to the main report by click return button in the drillthrough report.
    Reference:
    Troubleshooting Reports: Report Performance
    Drillthrough, Drilldown, Subreports, and Nested Data Regions
    If you have any more questions, please feel free to ask.
    Best Regards,
    Wendy Fu
    If you have any feedback on our support, please click
    here.

  • Firefox has remberd a password to a website ... chessatwork and I get loged in to my main page and when I click on any link it takes me right back to my log in page, where it has it stored.... password and user name,,, whats up and how do I turn that off?

    Firefox has remberd a password to a website ... chessatwork and I get loged in to my main page and when I click on any link it takes me right back to my log in page, where it has it stored.... password and user name,,, whats up and how do I turn that off? chessatwork has ran great for me for many yrs, then one day I down loaded firefox and went to play chess on this site chessatwork.com, well the window popped up asking to remember the log in and pass word and so I said ok, and it did, but now when I click log in and I go to my main page (home) and click on any link, say to play game I return right back to log in

    See http://kb.mozillazine.org/Deleting_autocomplete_entries<br />
    Remove a saved password here: Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
    You may also need to remove the cookies from that website.<br />
    * Tools > Options > Privacy > Cookies: "Show Cookies"

Maybe you are looking for