Need a password reset

Passcode wont recognise me. My ipad ask for me to update my tablet. Now it wants a passcode and what I thought I set it to wont let me in now it just disables the system
Message was edited by: Vicki Stipp

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost

Similar Messages

I need my password reset on my Mac.

I need to reset my password on my Mac notebook....

Resetting or changing a password:
For Snow Leopard or earlier: http://support.apple.com/kb/HT1274
For Lion or later: http://support.apple.com/kb/HT6022
This is also useful:
http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email
If it's running Mac OS X 10.6.8 or earlier, insert a Mac OS X install DVD, restart with the Option key held down, click on it, and use the Reset Password utility.
If it's running Mac OS X 10.7 or newer, restart with the Command and R keys held down, open the Terminal, and use the resetpassword command:
https://discussions.apple.com/docs/DOC-4101

Feature to spit out a list of users that need a password reset from DB?

Not too sure which category this would be in, so please direct me if you know
As the title says, is there a feature or tool that exports a list of usernames that have their password expiring in, for example, the next 10-20 days? It's a common occurrence that people forget to change their password and end up being locked out. This tool would greatly make it easier on our IT dept.
Thanks!
This topic first appeared in the Spiceworks Community

Not too sure which category this would be in, so please direct me if you know
As the title says, is there a feature or tool that exports a list of usernames that have their password expiring in, for example, the next 10-20 days? It's a common occurrence that people forget to change their password and end up being locked out. This tool would greatly make it easier on our IT dept.
Thanks!
This topic first appeared in the Spiceworks Community

Need BIOS Password Reset HP Pavilion 17

I have forgotten my BIOS password and after a couple of failed attempts, I get the following message:
System Disabled
[ 88988223 ]
Can I get some help with this?
Please and Thanks.
This question was solved.
View Solution.

jorge
try: 37680805
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

I need a password reset from a VERY old defunct email address

I am trying to play tracks from my library.
Itune sis asking for a password inorder to authorise this PC to play the tracks.
The account names that appear are old ones that I do not have access to their linked email accounts & I cannnot seem to get thru the DoB section of iForgot even when i enter the birthdays of everyone i know.
I have given up on Itunes support as I get a different person with a different interpretaion of my requirements each time.
This problem has arisen because Ive had my whole library trasferred to an ext hard drive, This should not pose any problems, and in the main has been quite straightforward, except for about 30% of my library that was purchased a long time ago with account names that my wife and i were using.
I know what the account names are as Itunes shows them in the prompt that asks for the passwords.
P L E A S E let there be somenbody out there who can help or even tell me how to phrase my predicament to apple so I can listening.
Ta very much

Hi there
I'm experiencing the very same issue - my work laptop has recently been rebuilt and I am rebuilding my library from an external hard drive. Have you managed to establish a workaround?
Thanks
N

Need bios password reset

Haven't turned the net book on in over a year I have a halted code of CNU914328V PLEASE HELP. Any help is much appreciated
This question was solved.
View Solution.

Hi,
Please try (all lower cases)
e9lo3vf7u6 (3rd char is lower case of L)
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Vendor mapping and password resets in EP7

Good day,
This is my first thread, so please bare with me.
I'm currently faced with a challenge regarding Vendor mappings and password resets.
We make use of EP7.0 and Netweaver 2004s for the backend. SRM version is 5.0. We map the vendors in the portal to the relevant backend systems. After setting the passwords for the vendors in the backend, we have to log in with the ID's to hard set the passwords. The vendors are set as dialog users and thus their passwords need to be reset regularly, in our case, every 30 days.
My question is this: Is there a better way of managing the vendor mappings, like for instance making them service users which removes the need to change passwords, as from what I understand, it's actually the vendor groups that are mapped to backend users and not every user that belongs to the vendor group. The users still need to log onto the portal with their passwords.
Any ideas are welcome.
John

If its One Portal User to One backend user, you can eliminate this need of password resetting by configuring Logon tickets.
From what I understood is it that you have many portal users all mapped to a common backend user?

DB Link password reset

The application team wants to know if they can reset the DB link password for all their applications(dev,test & prod) at the same time.
Since lots of apps have these exact kind of DBlinks that need a password reset....can anyone suggest what would be a good approach to tackle this?

I'm not completely sure that I understand the problem...
Assuming that a database link uses a fixed username & password to access a remote database rather than, say, using the current user, you can change the password that is associated with the database link. You'd need to change the password in every database where the link exists (though dev, test, and production databases normally have database links to other dev, test, and production databases rather than all having database links to the same database). You can obviously log on to each database in succession to change the password (i.e. log in to prod, change the password, log in to test, change the password, etc.). That's not literally simultaneously but it can happen in a short time window. Is there really a problem if it takes a couple minutes before the database link in dev is working again? It is, after all, a development environment.
Normally, if you're going to use fixed usernames & passwords in database links, those accounts are created specifically for the database link and the passwords for those accounts never change precisely to avoid coordinating password changes on dozens of databases.
Justin

PC22224 switch password reset OR anchor?

Is there a proven password reset procedure for the PC22224?
Or, has Linksys provided me with an anchor for my collection?
I've inherited a PC22224 switch here at work.
The original setup was done by someone now gone.
We have not been able to locate his setup notes.
This switch is not responding to the password reset procedure for the SRW switches (or I'm overlooking something).
I have console access.
The switch is booting OK.
I press ESC.
Get prompt: Boot>
Any help would be greatly appreciated.
Message Edited by Cybersys on 05-13-2008 07:51 PM

Here is the ONLY way I can find to RESET the admin password on a Linksys/Cisco PC22224
managed switch! It's not horribly complicated at all.
Basically, you download the software configuration file from a working switch of the exact
same model and upload it to the "broken" switch with the password you need reset!
First, you MUST have a working PC22224 switch that you KNOW its admin password!
Hook that switch up from the console to a computer that uses something similar to
Hyperterminal. There are plenty of instructions on how to do that in it's manual, so I
won't get off in that area!
Boot up and login as "admin".
Go to the "Advance Management" tab.
Select "File Transfer".
Select "Send File via Kermit"
Select the first file "S/W Config. File".
When you see "Transfer File Now?", select "Yes".
Now you must go to the top of Hyperterminal and
select the "Transfer" tab and then select "Receive File".
You should soon start transmitting a file (mine was called "aswcfg.rom").
It should show the file name. Remember the file name AND where it is transferring!
This is important, because you will need to know where to find it next when we start
sending it to your "broken" switch!
When it finishes, disconnect your AC and serial cable from that switch
and move them over to your "broken" switch that needs the password reset!
Boot up your "broken" switch, as soon as you see the prompts on the screen,
type "esc".
You should see a prompt that looks like this "Boot>"
Now, type "upload",
You should see "Start Kermit Upload Now" on the screen.
Now you must go back to the top of Hyperterminal and
select the "Transfer" tab and then select "Send File".
Select the file you just downloaded (mine was called "aswcfg.rom")
Once it finishes downloading it will flash the rom with the new code.
After it is complete, you can reboot the machine and log into the
admin account with the same password you used on the working
machine you downloaded the new code from!
Let me know if you have any problems!
You can send Jack Daniels or other kudos to me for this fix.
Email address reinserted with snarky encryption by kidbyte on 03-19-2009 04:03 PM
(Mod Note: Email address removed.)
Message Edited by kent07 on 03-19-2009 04:29 PM
Message Edited by kidbyte on 03-19-2009 04:47 PM

I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in?

I need help with resetting my ichat. When i try to login now it wont let me... it says "AOL Instant Messenger password" and then "iChat can't log in to ... because your login ID or password is incorrect. How do I reset this if I cant log in? When I try to press online the same thing pops up and I have no way of logging in or asking for help.

Hi,
iChat (it would help to know which version) can accept Apple IDs as valid AIM Screen Names.
However if you have iChat 5 or earlier you cannot use ones ending in @me.com or @icloud.com issued by iCloud. (they can be used in iChat 6 or Messages as these versions make a double login to AIM and Apple to allow the use of the password).
In addition if you are using an Apple ID for an AIM Screen Name the password still needs to keep to the 16 character limit that AIM has.
AN @mac.com name can be used on any version of iChat (Until the 30th June 2014)
As it does not need a double check with Apple you can use it to log in to the AIM Web pages
Login here with an AIM Name registered at AIM or and @mac.com name and see if you get any suspended account messages.
Sometimes account can be suspended. Usually because something has triggered the "Unusual Activity" item.
About a year ago many @mac.com users that travelled out of their own country found themselves suspended when they got home.
If the Name checks out of if an Apple ID the password in known to be 16 characters or Less then do this:-
In Lion upwards open a Finder Window and use the Go Menu whilst holding down the ALT key.
Select the Library that appears in the menu list.
Navigate to Preferences.
(If you have version earlier than Lion the just navigate to ~/Library/Preferences (that's the Library in you Home - Little House icon - folder)
Fnd com.apple.ichat.aim.plist (even if you are using Messages)
Drag the file to the Trash and Restart the app.
7:39 pm Thursday; May 29, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I need to delete an old icloud account on my i phone but can't remember the password and have changed my e-mail as it was cloned so can't use the password reset. Any ideas?

Can anyone help me. I need to delete an old iCloud account on my i phone 4S so that I can use my new one. My old e-mail was cloned by my ex husband so I had to delete the account . I do not know what the password was and I can't use password reset as the old account does not exist and I have no chance to resurect it. any ideas?

Hi Gail it is a separate apple id used on my old iphone. I now have a new appleid and password which is functioning though the new phone is bringing up my old apple ID
Ta,
BG

I have bought an ipad, and when i go to reset it, it needs the restrictions password which i dont know. When i plug it into itunes, it asks to turn find my iphone off, which needs the password of the old owners itunes.What should i do?

I have bought an ipad, and when i go to reset it, it needs the restrictions password which i dont know. When i plug it into itunes, it asks to turn find my iphone off, which needs the password of the old owners itunes.What should i do?

If you're able to contact the person who set the lock, send them this link and tell them to follow its instructions.
If not, you can't use the device but may be able to get it refunded. Apple won't remove the lock for anyone other than the original owner(assuming they're alive.)
(119278)

Need help for reset bios password

hello
i need help for reset my bios password
my laptop is HP Pavillion tx 232
code 59637760
thank you
This question was solved.
View Solution.

Try
46795366
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Does my password need to be reset every once in awhile?

My iPad will occasionally decided to forget my password, but when I re-enter it, it will refuse to acknowledge it. I can only access the features of iTunes and the App Store etc, if I reset my password on the apple site. There seems to be no real pattern for this treachery that I can figure out, so perhaps I am just being a noob and am not aware that the apple password needs to be reset after awhile? This has happened approximately 4 times and I am Running out of password ideas.

Nope! I'm not getting any message other than one asking me if I have forgotten my password, then giving me the option of recovering it. My iPad simply refuses to accept that the password that I put in is correct... This happened before iOS6 as well... Could it be that I am living in a country other than where my AppleID is based?

I really need help on reseting my security questions i tried sending in my rescue email but the rescue email is not showing up on the password and security tab and i'm positive i don't know the answers this is really getting annoying _

i really need help on reseting my security questions i tried sending in my rescue email but the rescue email is not showing up on the password and security tab and i'm positive i don't know the answers this is really getting annoying

If your rescue email is not working and you cannot remember even one answer, then you only have one option - call Apple.
http://support.apple.com/kb/HT5665

Need a password reset

Similar Messages

Maybe you are looking for