Need a quick help with miniracer

Miniracer does not run on 64 bit. I contacted upstream, and they say it should work on 32 bit, the error is connected with 64 bit. They asked me to confirm this, but I dont have a 32 bit archlinux near me. Could you please test the package on 32 bit please?
Package: https://aur.archlinux.org/packages.php?ID=8702
Last edited by SanskritFritz (2011-12-12 14:42:39)

I try to start a race and it freezes. Not sure if that's the same issue you have?

Similar Messages

Need some quick help with redoing a website

Hi, I did my website done in iWeb in 2008, published it, and have it hosted by GoDaddy. I want to take it offline for now and design a new 'under construction' site, but there is a chance that I might want to still go back to the original version.
I see the current 'Domain' in Home Folder>Library>Application Support>iWeb.
Can I just redo my site (still working in pre-2008 iWeb), publish it, and if I need to, use the old 'Domain' to revert to my current website?
If yes, how do I do that....and, if 'no', what should I do?
Thanks!

Hi and thanks. To reply....
I published the website in iWeb and it is on my MobleMe. It was done in iWeb v 1.1.2, and I have not upgraded iLife on the computer that I designed the website on, as I feared losing some/all of it in an upgrade.
I do, however, pay GoDaddy for my corporate URL AND hosting....which I suspect is the forwarding and not 'hosting' per se....but on my Hosting account on GoDaddy it does say 'Shared Hosting'.
I do not want to 'overwrite' my current site just yet, as I am uncertain about the next one's content or the time to do it the way I envision it. What I want to do is SAVE my current site in case I want it back and, in the meantime, put up a page that says Under Construction. Can you help with that?
Much appreciated

I'm new to java and I need some quick help with NetBeans.

Hi. To whomever can help here's the problem. I've been trying to install netbeans ide 5.0 on my computer for a while now and i can't seem to find out what is wrong. I'm in a java programming course and i need the J2SE Developement Kit 5.0 Update 7 and NetBeans IDE 5.0 Installer on my comp. Whenever i go to install it, it can't automatically create a directory and has erroe null in place of it. Whenever i made a new directory for it a page would come up telling me all of the errors during the installation which are null. Since i have administrator privelages and plenty of free space on my hardrive.

Hi,
I want to suggest you that
1.please check if any prerequisite is require before installing the NetBeans IDE,i hope there is nothing like that except proper jdk on your machine.
2.if you already having JDK on your machine check for the compatibility of that jdk version with the required NetBeans IDE version.
3.follow the steps provided to install the NetBeans IDE 5.0 for that refer the below link
http://www.netbeans.org/community/releases/50/install.html
hope you will get rid of the problem .....
---Vidya

Need some quick help with server proxy on PI 7.1 system

Hi,
I am implementing a server proxy on the PI 7.1 system to do some logging to a table. So, when I go the the proxy in sproxy and generate it, in the interface section on the properties tabs I only see a drop down that says point to point enabled. There is no implementing class to click into and thus not method to populate with the custom code. Some direction would be appreciated, I have been working 7.0 for a while, so the missing implementing class is new to me! I know the method name has changed from the execute_asycronous etc... Am I going to the wrong place now to find the implementing method?
Thanks,
Chris

Whoops! Brain cramp. accidentally set the interface to outbound and not inbound in the ESR lol. Sorry.

Need some quick help with jbutton

Hi,
My first post so please be gentle!
I currently have two buttons in my container. The first one when pressed calls another function that generates a set of coordinates (button = generate). I now have another button that wants to take those coordinates and draw them on-screen, but I'm having trouble doing this since I can't get the "generate" button function to pass the xycoords over to the "draw" button function. I'm more of a Fortran/Perl programmer and I'm a bit confused how to go about this. I tried making the variable (xycoords) a gloabl variable, but id rather not do this.
Any tips?
Cheers,
Adriano

Sure, show us the code. Otherwise we have to try to read you mind.
Here is the scenario you are in:
Event Driven Method (ActionPerformed/ButtonClicked/etc): you do not have arguments that you can control, so if you want to use something from within that method you have to have visibility to it (global definition with respect to the routine) and in the Java world that usually boils down to class variables or some type of public data class.
Now, it you want the coordinates of the click event, that is contained in the MouseEvent... getX and getY, so you can use these as arguments to other methods from within your MouseListener.

Need some quick help with a method

I am trying to navigate to the next row in a result set in a nextRecord() method. The way I have it now, it doesn't even try to go into the while loop I have.
static boolean nextRecord(){
         try{
           while(rs.next()){
               return true;
           error = "End of File";
            return false;
        catch (Exception e){
     System.out.println("Error: " + e.toString());
        return false;
}If anyone has an idea as to what the problem could be, please let me know

i know nothing of ResultSet,
but if its anything like the rest of the API, isnt there a hasNext() method which is a boolean.
and doesnt next() usually return an object.

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

Need some quick help - fairly urgent!

I've just taken over a new job and have been the task of finishing the new brochure for Christmas, there's not a lot to do but a lot of the measurements need changing
This is the layout I'm dealing with..
All the boxes have been made in Illustrator
The text has been done in In'Design and it seems every piece of text is it's own box if that makes sense
My question is, if I select the whole specification box - copy, paste it into Adobe Illustrator and change the text there, then paste the edited box back into In-Design, will I lose quality when it gets printed?
I'm worried if I do it this way it may come out blurred? Or am I just worrying about nothing?

I couldn't find an Illy file in the end and have ended up creating tables in ID to replicate what was already there!
Didn't take very long and I guess if I didn't do it now, I'd come across the same situation next time!
Date: Wed, 30 Nov 2011 08:48:07 -0700
From: [email protected]
To: [email protected]
Subject: Need some quick help - fairly urgent!
    Re: Need some quick help - fairly urgent!
    created by Peter Spier in InDesign - View the full discussion
There certainly are viable "quick fix" solutions proposed here, and if the dealine is looming and this file never needs to be touched again I might be tempted, but they are only postponing the pain for a file that needs periodic updates, and I wouldn't waste effort on them, myself, when that time can be put toward a proper rebuild now if that's the ultimate goal.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4054725#4054725
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4054725#4054725. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in InDesign by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

In need of immediate help with FCP new user taking over colleagues position

Good Morning. I am in urgent need of some help with a specific final cut pro question. My coworker and I have been working on a video project for our employer, a university. He ran the editor (FCP) and I ran the logistics of setting things up, keeping the contacts and scheduling, etc.
He has left until late August and there are two major typos in his work which is posted to the web at the moment. I need to correct these typos and have less than a faint idea of how to do it.
First of all, what is the file's last three letters? (.doc, .mov, etc...)
Second, can I edit this as easily as I think I can? Just click in the text file along the bottom timeline and edit that way?
How do I export the movie as an mp4 file after i have edited it.
Anything else that would be deemed helpful is always appreciated!
I really appreciate the help. I was never trained on this program because I never needed to be. Unfortunately, as it turns out, I did.
Thanks for the help!

You need to locate the Project file. Which will be somewhere in your colleague's User space.
In the Finder, press command and F to activate the Find function.
Make sure the following parameters are set:
Search *This Mac* and Contents
Kind is Documents
Type the project name.
The icon looks like this:
Double click it to launch Final Cut Pro with the project.
To locate the text overlay, click on the Timeline to make it active. Use the down arrow on your keyboard to jump from one cut to the next. The text overlay will look similar to this:
Double click on the Text clip. This will place it in the Viewer (the left "monitor").
Click the "Controls" tab above the Viewer and make your changes. Press Return.
Clicking anywhere in the Timeline once more will update it.
Make sure that no clips are selected and the Timeline is the active window.
Go to the menu bar: File > Export > Using QuickTime Conversion.
In the window that opens, make sure that Format is set to QuickTime Movie.
Click the Options button. Look at the top of the next window.
Does it say Compression Setting: H264? If it does, great.
If not, click the settings button and choose H264 from the *Compression Type* button.
At bottom left, drag the Quality slider to Best. Click OK.
This brings you back to the previous window.
Click on Size if you need to change something -there are a number of presets, but you can choose a custom size if you wish. Click OK.
That window is dismissed and returns you to the Save dialog.
Type a name and choose a destination for your file.
Message was edited by: Nick Holmes

Need a quick help on Pro*C

Hi All,
I need a quick help on Pro*C. Here's the details on the same:
- My program takes one input file as parameter. Lets assume argv[2] is the name of the inputfile, which is my input parameter as well.
- ps_filename = argv[2]; I'm copying argv[2] i.e. filename in a variable called ps_filename
- Now this inputfile can be of two types, say type A_yyyymmddhhmmss.dat and B_yyyymmddhhmmss.dat.
- Therefore for every run I'll have one of this value as input parameter which will be copied into the ps_filename.
- Now I need to call two different functions based on the inputfile i.e. if ps_filename like 'A%' then call func A() else call func B();
But in ProC/C there is no provision to use like operator.
Therefore my question is how can I have ps_filename like 'A%' in C?
Can anyone please help me to solve this issue?
Hope to get your co-operation.
Thanks & Regards,
Debabrata

debabratas wrote:
Therefore my question is how can I have ps_filename like 'A%' in C?Hello, why don't you just substring on the first character, and if that's an 'A', then LIKE 'A%' will also hold.
For example, in Pro*C:
if (substr(ps_filename,1,1) == 'A') {
..

Need a little Help with my new xfi titanium

+Need a little Help with my new xfi titanium< A few questions here.
st question? Im using opt out port on the xfi ti. card and using digital li've on a windows 7 64 bit system,? I would like to know why when i use 5. or 7. and i check to make sure each speakear is working the rear speakers wont sound off but the sr and sl will in replace of the rear speakers. I did a test tone on my sony amp and the speaker are wired correctly becasue the rear speakers and the surrond? left and right sound off when they suppose too. Also when i try to click on? the sl and sr in the sound blaster control panel they dont work but if i click on the rear speakers in the control panel the sl and sr sound off. Do anyone know how i can fix this? So i would like to know why my sl and sr act like rears when they are not?
2nd question? How do i control the volume from my keyboard or from windows period when using opt out i was able to do so with my on board? sound max audio using spidf? Now i can only control the audio using the sony receiver.
Thank you for any help..

/Re: Need a little Help with my new xfi titanium? ?
ZDragon wrote:
I'm unsure about the first question. Do you even have a 7. system and receiver? If you just have 5., you should be able to remap the audio in the THX console.
I do have a sony 7. reciever str de-995 its an older one but its only for my cpu. At first i didnt even have THX installed because it didnt come with the driver package for some reason until i downloaded the daniel_k support drivers and installed it. But it doesnt help in anyway.
I have checked every where regarding the first question and alot of people are having problems getting sound out of there rear channels and the sound being re-mapped to the surround right and the surround left as if there rear left and rear right.
I read somewhere that the daniel_k support drivers would fix this but it didnt for me and many others.
For the second question i assumed it would be becasue of the spidf pass through and that my onboard sound card was inferior to the xfi titaniums. But i wasnt sure and i was hopeing that someone would have a solution for that problem because i miss controlling the volume with my keyboard.

Need a little help with syncing my iPod.

I got a new macbook pro for cristmas and a few cds. After i tried to sync my ipod to itunes i put a symbol next to each song that i got from other cds saying that they were downloading but they werent. Also the cds i downloaded to my ipod for the first time didnt appear at all. Need help.

/Re: Need a little Help with my new xfi titanium? ?
ZDragon wrote:
I'm unsure about the first question. Do you even have a 7. system and receiver? If you just have 5., you should be able to remap the audio in the THX console.
I do have a sony 7. reciever str de-995 its an older one but its only for my cpu. At first i didnt even have THX installed because it didnt come with the driver package for some reason until i downloaded the daniel_k support drivers and installed it. But it doesnt help in anyway.
I have checked every where regarding the first question and alot of people are having problems getting sound out of there rear channels and the sound being re-mapped to the surround right and the surround left as if there rear left and rear right.
I read somewhere that the daniel_k support drivers would fix this but it didnt for me and many others.
For the second question i assumed it would be becasue of the spidf pass through and that my onboard sound card was inferior to the xfi titaniums. But i wasnt sure and i was hopeing that someone would have a solution for that problem because i miss controlling the volume with my keyboard.

Need some URGENT help with 3 DVD mastering issues PLEASE! :

Hi there,
Firstly, I am running DVD SP 3.0.2 on Mac OS 10.4.7 on a G5 Dual 2 GHz 3Gb Ram plenty of HD space...
I am creating a DVD with: An intro sequence, a main menu, 4 sub menus, and 4 sections with around 12 chapters each.
I am having some big problems, and a pretty stuck. I will lest them separately below, numbered. If you are able to help, please refer clearly to which number you are helping with. Any help is MUCH appreciated! Many thanks!!
1. Each of the 5 menus (1 main, 4 sub) have a background video, and a separate audio track. I added the background videos by simply dragging them to the assests panel, then from there onto the menu editor window. They are created in FCP and are properly encoded. However, when I click the motion button, or use the simulator, the videos do not show up. The music plays, but all i see is plain black.
What is going on?!?!?!
2. I am really struggling with rollover buttons. I have custom created buttons, and I wand them to have a soft red glow around them when hovered over. HOW ON EARTH DO I ACTUALLY DO THIS??
The buttons are in photoshop so can be exported with/without background/glow in any format.
3. Is it possible, once I have got the above rollover working, to have an image to the right hand side of my buttons which changes with the the button rollover. i.e. hover over button 1, see image 1. hover over button 2, image changes to image 2.
PLEASE PLEASE give any help you can, I have a deadline coming up and am quite stumped. Thanks again!!

I am still having problems regarding issue Number 1. PLEASE ANYONE HELP?!
Sorry, I'm not sure about the motion menus. I avoid those whenever possible. But you might click on the menu in the storyline tab (whatever it's called -- the hierarchical view with the disc, tracks, slideshows, etc.) and look at the properties and see if there's anything you have to enable specifically for motion. And be sure the motion button is on on the main display/preview area, but it sounds like you already know how that works.
For your information, here is a screen grab of the menu I am trying to create:
http://www.redhavoc.co.uk/stuff/menu.jpg
I think it is obvious that when a button is hovered over, I want it to glow red, and the image to the right will change to match the respective button.
IS THIS GOING TO BE POSSIBLE????
Yes.
First, your menus have to be layered menus. Unfortunately, there's no way to convert non-layered menus to layered menus, so if you already have non-layered, you'll have to just delete them and create new layered menus. The button (and menu item) to create a layered menu should be right by the normal new-menu item.
Next, the graphical work is all in Photoshop.
Side tip: You may already know this, but I found it's best to use 640x480 for the Photoshop document. When I do text and leave it as a text object in the Photoshop file, it resizes poorly in DVDSP. So this ends up being another 720x480 vs. 640x480 square/rectangular pixel conversion thing. DVDSP plays in the 640x480 world, at least as far as the designer can see. So I keep my images at 640x480, and it doesn't have to resize, and everything looks right.
Moving on... Set up your basic background, the part that won't change (or will have other things covering it, like for your square image).
Then put in all the buttons and images you'll be using, each part in a separate layer. This could have fifteen buttons (you have five buttons, and there can be three versions for each -- inactive, selected, and activated versions) and five or six square images (you said one for each button, and you might want a blank default if, say, you want to add a "back" button on the menu and want some blank or default image for the square when they're on the "back" button).
Sometimes people don't bother with a separate "active" button state, but you usually want some visual feedback that they clicked the button. Also, I usually just build the default (unselected) button into the background; that's less hassle later on, and it will just draw the selected or activated buttons over that when the user is on that button.
Line up all your buttons and images. All the square images lined up perfectly on top of each other, all the buttons in the right places (so you'll have three buttons stacked on top of each other in each spot). Give each layer a short but quickly recognizable name, and line them up in a consistent order. (button1-default, button1-selected, button1-active, button1-squarepicture, then button2-default, ... etc.) Photoshop and DVDSP don't care, but it makes it easier for you later.
Note that earlier versions of DVDSP won't show Photoshop layer effects. (They handle layers, just not the effects, like inner glow, outer bezel, etc.) I don't remember when they changed this, but I think it was version 4.something. So if you're using that method to make your buttons glow, you may have to flatten each selected or active button layer, and you may even need to create a dummy blank layer underneath it first to give it something to flatten onto.
Save the file as a standard Photoshop file (.psd). Drag the file onto your DVDSP layered menu and set it as the background.
Now, in DVDSP, create all your buttons. Just drag boxes over/around the button pictures you have. Feel free to make them extra-big; users won't see the actual area you've selected, and bigger areas makes it easier for people to hit them if they're using a mouse on a computer to watch the DVD. You can point the buttons to their targets now if you want, and set the end jumps on the tracks if you want. (I tend to set the end jumps on the tracks so they automatically select the button for the next track.)
Now's the fun part, since it will actually hook everything up and should be easy if your naming layer order were consistent. Click on the layered menu (in that hierarchical view) and look at the properties window. (Sorry I can't remember the technical names for all these windows; I'm doing this all from memory. So feel free to ask more questions if you can't find what I'm talking about.) One of the properties tabs should have a grid of checkboxes with a list of your layers. Make sure the background is checked for all of the states. Then check the layers you want to show for each button state, as well as the corresponding square image to show for each.
Again, I'm doing this from memory, and I can't remember exactly how things are listed in that grid. But I remember it keeps your layers in the same order you put them in the Photoshop file and shows you those names, so it should make it easy to go down the list and check the right boxes.
And another side tip: You can update the Photoshop file, but once you've put it in DVDSP, if you change the layer order, it will screw up the check boxes you checked. It always shows you the layer names correctly, but it keeps the checkboxes in DVDSP simply assigned to the layer number, so the fifth layer will keep the same checkboxes even if you juggle them so some other layer is now the fifth layer. So if you do juggle the layers in Photoshop, go back and fix the checkbox list in DVDSP.
I put a sample Photoshop file based on yours in
http://dan.black.org/layered-menu-sample.psd
It's quick and dirty, but shows the layer layout, and you should be able to drop it on DVDSP to play with. (I also won't leave it there forever, maybe a few weeks, so anybody reading this in a month or more probably will get a 404 for that url.)
Again, doing this from memory, so feel free to ask if anything doesn't work or doesn't make sense.
G4/dual867 Mac OS X (10.4.5) 2GB/0.8TB

Need a little help with Slimbox (Lightbox clone) and Spry data sets

Hello guys!
First of all let me say that I'm not a programmer in any way,
shape or form, and somehow I managed to build me a dynamic
thumbnail gallery that reads data from an XML file and displays it
on my webpage using a Spry data set and a slider widget (yay!)
This is of course only thanks to the many great examples
provided by the Adobe Spry team, and me being stubborn enough to
keep at it, even though I don't really understand what I'm doing :D
But I got to this point where I have basically everything
working, except that I can't get the Slimbox (Lightbox clone)
script to work with the Spry-generated thumbnail gallery.
From what I could understand from other threads on this
forum, is that I need to add an observer somewhere, only that I'm
not sure where and how (those threads are pretty old and the
examples aren't available anymore).
I'm sure you guys know what I'm talking about, anyway, here's
what I got so far:
http://www.riotdesign.com.ar/misc/gallery/test1.html
I have the thumbnail gallery populated from the external XML
file, a basic page navigation using the Sliding Panels widget, and
the Slimbox script which works only on the static test image.
Okay I guess that's it for now, sorry for the long post and
of course any help with this will be GREATLY appreciated :)
Thanks & bye!

Kev,
Where exactly does the .evalScripts = true; text need to go?
Does it go in the href call?
<a href="ManageNotes.asp" title="Manage Notes" onClick="this.blur();
Modalbox.show(this.href, {title: 'Manage Notes', width: 575}); return false;">View your notes.</a>
Thanks for any assistance.
J Bishop

Need info and help with ARD

I would really like to get some information and help that would enable me to troubleshoot my mother's new Mac Mini for her. She lives in CA and I live in WA. She is new to Macs and I just KNOW there will be lots of desperate phone calls from her to me!
I should say right up front, though, that although I do pretty well with my own Macs, I know almost nothing about THIS subject. So, please, any help or information you choose to give me, it will need to be in plain, old English as I don't understand all this stuff.
My setup is this: (I don't know what is relevant or not) ......I have a desktop G4 running 10.4.3 that will be the computer I will use to remotely control the Mini. The Mini is also running 10.4.3 (or will be when I get it set up for her). I am connected to the internet through a wireless connection to my ISP. I have a Linksys router and connect to that via Ethernet. We have 4 other computers here at home connected to our network wirelessly.
My Mom will connect to the internet using a modem and AOL
This is what I have done so far but I have not been able to make a connection. (As a test, before I go to CA and setup the Mini, I thought I’d try to remotely control my iBook, which is on my network.) On the iBook, I enabled ARD in the Sharing preferences and checked "VNC viewers nay control screen with password" and then entered a password. On my desktop computer, I downloaded Chicken of the VNC, entered in the info I needed (address of the iBook and password) but it would not connect.
I've read so much about clients, servers, etc. here lately that my head is swimming and I’m more confused than ever!
Can I even do what I'd like? It'd sure be a sweet deal for me and avoid a lot of frustration for my Mom .......who, incidentally, is switching to a Mac from a PC at the tender young age of 75! Cool, huh? I'd really like to make it as painless for her as possible.
Thanks,
Kathy
G4/dual 1.25 and iBook G4/933 Mac OS X (10.4.3)

The phone line speed is the BIG issue.... there are things like DynDNS that cab help with the static issue...
now if you get her highspeed through cable...
good luck

Need a quick help with miniracer

Similar Messages

Maybe you are looking for