Need a recommendation on a DAQ to finish this configuration
I am currently putting together a setup that includes the following items:
1: Motor Driver - Aries AR-01xx from Parker
2: NI UMI -7774
3: Motor - Direct Drive Rotary Table from Parker that is listed under rotary positioners on their website
4: PCI DAQ is unknown at this time.
I am pretty new with motion control and I am trying to see if there is a DAQ/setup out there for a PC that would allow me to interface with items 1-3. I was thinking a NI PCI-7342 might work since I only intend to use 2-axis and it also comes with NI Motion Control. Or is there a better setup that I should use to interface to the motor driver? I already know that items 1 and 3 work together I just need to be able to interface LabVIEW 8.6 to the motor driver?
Any help would be greatly appreciated.
Thanks,
Ginzu
Ginzu,
I don't expect every user being an expert in the NI acronym jungle , but I just wanted to make it clear, that there is a significant difference between these two product lines. Sometimes there are some misunderstandings (Q: "How can I program my 73xx board with NI-DAQmx?" A: "You can't. You need to use NI-Motion" ) and I wanted to avoid this siutation.
Jochen
Message Edited by Jochen on 09-18-2008 03:37 PM
Similar Messages
-
Needing Sound Recommendations for a New Living Room TV
I am in need of some solid TV recommendations for my living. I currently have a 65" Plasma that the sun coming through the windows destroys the picture. I guess I needed to do more homework before I made the purchase. I love the TV so despite my wife being totally against it, I am going to put it in my bedroom.
With that being said, is there a television (60" or larger) that anyone can recommend that works perfectly in those conditions? I know it would be cheaper to buy drapes, but I want to do it right this time. Any recommendations would be much appreciated. I have about three months before I return from my deployment to make a decision. Time is definitely on my side. ThanksMight not be a bad idea to have a consultation done. My go to TV for rooms with a lot of lighting is LGs. They're really improved the past few years and prefer them over sharp. I would mainly stay away from Samsung. Even though they're awesome TV's, they tend to put a glossy finish on them. I also love Panasonic plamas, but plasmas have a glass screen which produces glare.
I am a Home Theater Geek Squad Installer. I know my stuff and love to give advice, but don't hold me responsible when you screw something up because you decided to do it yourself instead of having a professional do it. -
Need a recommendation for a DJ speaker setup
what loudspeakers, subwoofer, and accessories should I get for small to medium venues.I already have a full stanton setup (mixer/two tables/) and have a laptop I use too. I just have only used stereo equipment and done house partys but want to step it up and I am not sure what to buy and the Best Buy I work at does not have a musical instrument department.
Solved!
Go to Solution.Lot's of different options, and it sounds like you've determined what size of setup you want. If your going to be doing small party's, I would recommend two powered speakers, since you already have the tables and mixer. And the powered speakers will help in the ease of setup also. If you can find them, there still may be some out there in Best Buy, but they are discontinued, I would look into getting two Thump15's by Tapco. They put out alot of volume and would be great for a DJ setup. And obviously you could upgrade from that to Mackies, or EV's. Just depends on the price range. Please give us a call if you have any more questions. Thanks! Randy Smith M.I. sup Tempe, AZ 480.303.7251
-
I need a recommendation for a 24" monitor for my late 2013 MacBook Pro
I need a recommendation for a 24" professional photography monitor for my late 2013 MacBook Pro. I am looking for a monitor that plays well with my 13" late 2013 Macbook pro. I tryed the Dell U2413 and found after the fact that it did not work well with my Macbook pro. Read up on the Asus PA 249Q, It also seems to have problems with my Macbook Pro. Apple display is larger than i want. Looking for recommendations for compatable IPS monitor for use with Aperture. buget is $300 to $800.
Anybody happy with thiers?
MacBook Pro with Retina display, OS X Mavericks (10.9), Aperture 3.5.1Any monitor will work. Decide what specs work best for your needs and get that monitor.
-
My Epson r340 printer is having gaps on my black ink even after cleaning several times. Funny is when doing the test print all the colors even the black ink would show all the lines coming out. If this can't be fixed I need a recommendation for a replacement printer that has a CD tray that can print cd/DVD. I'm not sure if I want Epson again as this is my second printer from them that's having a problem.
I switch to Canon printers ages ago and haven't looked back. Epson lost my business with poor post-purchase support and ink shenanigans. The Canon IP 7220 has been good printer for me so far and replaced the Canon IP 3600 I used for nearly 5 years and thousands of sheets of paper.
-
Bought a flight simulator and would like to use a joystick. Need a recommendation for a decent device compatible with a MacAir.
Thanks, Sig. I think I should've been a little clearer. I've attempted to do the updates on my Mac, but I get a warning that it will erase everything except calenders, email, etc from the iPad. I've syned the iPad with the Mac with no problem, but get scary messages when I try to do the latest update.
-
Need a recommendation for the best LP turntable to transfer lps to iTunes library...recieved a SONY that is recommended for windows only. Have a brand new SONY ps-lx300USB recieved as a gift that only says they will not guarentee results w/ mac. Please Help.
Just use that turntable with -> Audacity
-
Need a recommendation for an external Cd drive for iMac intel
Need a recommendation for an external Cd drive for iMac intel
Welcome to Apple Support Communities
Any external optical drive will work, so you can purchase the one you most like. Have a look at OWC to see some optical drives > http://eshop.macsales.com/shop/firewire/optical-drives/ -
Still nothing about File Vault that needs a bug fix for almost every user. This is becoming even more disappointing!
Apple Enterprise Support is aware of this issue. They have specific instructions which attempt to remediate the issue, however, attempting on two different MBP laptops, so far has not succeeded.
The problem to be specific is - hang at login. The Filevaulted user account gets its password entered, then the "progress bar" mid screen will be seen to halt, never resuming. NVRAM resets dont necessarily cure this issue, but turning off FV2 definitely does.
We are seeing this with 10.10.2 fully Apple-SUS updated machines.
Feedback has been sent to Apple over this as well.
Im recommending:
a. turn off FV2 until such time as a Apple provided update cures it
b. consider the Sophos WDE solution if WDE is absolutely required (disclosure: I havent attempted this, not sure about its workability) -
Have a problem with Lightroom 5.4. Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit". " Lightroom will attempt to fix this problem next time it launches". Except that it doesn't, I keep getting the same message and the program closes. Does anyone know what I can do to repair it? Can't back up, can't do anything.
There are dozens of threads in this forum that describe the fix
-
Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches"."Help
PleaseStan Blumberg wrote:
I have deleted the file but the message persists even after restarting the computer....any advice??...I am using LR 5
You don't delete a file, you have to delete a folder. Is that what you did?
If you deleted the folder specified above, and you still get the message, then it's the wrong folder. Use your operating system's search function and find ALL folders on ALL disks whose name ends with Previews.LRDATA, delete each one found, and then try opening Lightroom. -
"Lightroom encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it lauches". What do I do? I get the msg each time I try to open it.
It isn't a file, it's a folder. It will have the same name as your catalog, but will have the extension data. It will be in the same folder along with your catalog. If you need to use the search feature to search for *.lrdata.
-
I get the following window on loading Lightroom 5.7 -
Lightroom encountered an error when reading from its preview cache and needs to quit.
Lightroom will attempt to fix this problem next time it launches.
I have tried several restarts, without success. Also reinstalled Lightroom; no joy
Any suggestions?Using your system browser (Windows Explorer or Finder), open the folder that contains your catalog. In Windows it is in your pictures folder and then in a Lightroom folder. Inside of the Lightroom folder you will find another folder that has the extension .lrdata. It will have the same name as your catalog except for the extension. You need to delete that folder, and then start Lightroom again. Lightroom will generate a new previews folder, and you should be back in business.
-
I'm trying to watch a movie from my iPad on my tv with Hdmi cable. Do I need to do anything to the tv to make this work?
Not really. Using the correct Digital Av adapter and connecting the iPad to the Tv through one of its HDMI ports is all it takes. Of course making sure the correct input is selected in the Video source selection on the TV.
-
Anyone else have the issue where, after the 8,3 upgrade, you cannot access more than 1 exchange account on your iPhone? This is annoying to me as I need to access 4 daily and cannot due to this error.
The first one, my private home email, works fine. With the other 3, I get the message "Cannot get mail: The connection to the server failed"
All were working fine before the 8.3 upgrade. I did try the old trick of making one minor change on the account and resaving, but that did not change anything. I even deleted my work account and re-entered it from scratch, but again, sadly, no luck. For the time being, I am successfully getting the email via IMAP, but this ***** compared to exchange. Anyone have any idea what is happening or if a fix is in the works?Well, the one set up on exchange 2k3 is now working fine, although no changes were made on either the iPhone or the exchange side, so that's fun, but it still is throwing errors when connecting to the other 2 exchange accounts. The common elements are that both non-functioning exchange accounts are google apps for business accounts. So is one of the ones that's working, by the way. The settings on both accounts are the same as the one that's working, and both worked fine before the 8.3 upgrade. I have no issue accessing both of these accounts on my ipad which is currently on 8.2.x. If it's not the iphone OS at fault, I'm at a loss as to what it could be.
Maybe you are looking for
-
Can't connect HP Touchpad to internet/network
I have many issues with my HP TouchPad. I will only mention the MAIN ISSUE, I CANNOT CONNECT TO THE INTERNET through my network! I can connect to my network with my ipad2, my iphone4, my Sony VIO, my DELL Laptop, my HP wireless printer. But I canno
-
Material Master: Copy rule for purchase variant prices
Hello together, in the material master (transaction MM42) on variant level the purchase prices can by copied from the generic article to the variant; for this a copy rule can be applied; one of the copy rules can be selected an be used. Now, the cust
-
Can anyone tell me why not sign-up appears asking for permission?
-
Downgrading from tiger to 10.3.9. best way to do this ?
hello ! just got a new g5 dual 2.3 (not core) and i dont want anything to do with tiger ! (running lots of software that does not play nice with tigers..) what is the best way to downgrade to 10.3.9 ? thanks !
-
I bought a macbook pro 2.16 off a friend a couple of years ago. It came with 2gigs of RAM. I recently received 2 2gig sticks from my girlfriend out of her busted macbook pro. I understand that my machine will only (supposedly) recognize 3gigs. Howeve